Jump to content

Edel EAS 2.0 has arrived!


PMookie
 Share

Recommended Posts

Looks really nice. I am intrigued by the Edel fitting process. 

  • Like 2

Follow my golf journey to break into the 80s

Current tester for the Titleist TSi Driver

Spring 2020 MGS Tester for the Fujikura Motore X Shaft

Updated 4/27/2021
Driver:titelist-small: TSi 2 - Graphite Design AD-XC 6S
Hybrids:taylormade-small: SIM Max 3H, 4H - Matrix Ozik 85S
Irons:srixon-small: ZX5 5 - PW - Accra 95 icwt S
Wedges: :cleveland-small: CBX 2 54, CBX Full Face 58 - Nippon Modus 105 Wedge
Putter:  :odyssey-small: Two Ball Ten S Tour Lines - 31"
 

Link to comment
Share on other sites

Did you do the Edel fitting? When I did mine, they spent a lot of time on the weights under the grip and was part of the specs I was provided.

 

Did you post about the process? Guess that explains why you sold the seemore.

  • Like 2

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :callaway-small: 54-10S   :cleveland-small: 588  58-12
Putter:  :seemore-small: mFGP2

Backups:  :bobby-grace-1: 6330, :taylormade-small:TM-180, Bellum Winmore 787

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

4 hours ago, dlow206 said:

Looks really nice. I am intrigued by the Edel fitting process. 

It’s worth it. I’ve done it twice now. The results in the fitting are blatantly obvious if the fitter really fine tunes everything.

  • Like 1

Driver: :cobra-small: King F9 Speedback/:callaway-small:Epic Max LS, Xphlexxx Busa 2 Liquid, XX stiff, 45”

Fwy:  :callaway-small: Epic Speed 4w, MMT 80X

Hybrid: :callaway-small: X2 Hot Pro, 20*, Graphite Design Tour AD-DI 105X

Irons: :honma:TR20 Tour P 4-10, :Nippon: Modus 130 stiff, +1”

Wedges: :edel-golf-1: SMS 50D/54V/58D:Nippon:Modus 130 stiff, +1”

Putter:  :edel-golf-1: EAS 1.0

All but putter have Lamkin ST+2 Hybrid Calibrate midsize built to oversize +1

Link to comment
Share on other sites

4 hours ago, cnosil said:

Did you do the Edel fitting? When I did mine, they spent a lot of time on the weights under the grip and was part of the specs I was provided.

 

Did you post about the process? Guess that explains why you sold the seemore.

Yes. Second time I’ve done their fitting. Yes, fine-tuned everything by using the putter head weights, and the internal weights under the grip.

I didn’t post about the process this time. I was under a time crunch, we took an hour-and-fifteen to complete it, and I had to jump in the car and drive 2 1/2 hours to make a meeting.

The face on this new model seems to be more consistent both for direction and distance. I’m a firm believer in Edel fitting science, and I’ve been waiting for the new model to come-out to give it a try. A lot of folks think it’s just about aim, but if the fitter is worth their salt, they get the golfer dialed-in for distance consistency as well.

If anyone is within a decent distance of Jackson, MS, Tony Bishop at Nevada Bob’s is very good! The folks at Edel recommended him highly.

  • Like 3

Driver: :cobra-small: King F9 Speedback/:callaway-small:Epic Max LS, Xphlexxx Busa 2 Liquid, XX stiff, 45”

Fwy:  :callaway-small: Epic Speed 4w, MMT 80X

Hybrid: :callaway-small: X2 Hot Pro, 20*, Graphite Design Tour AD-DI 105X

Irons: :honma:TR20 Tour P 4-10, :Nippon: Modus 130 stiff, +1”

Wedges: :edel-golf-1: SMS 50D/54V/58D:Nippon:Modus 130 stiff, +1”

Putter:  :edel-golf-1: EAS 1.0

All but putter have Lamkin ST+2 Hybrid Calibrate midsize built to oversize +1

Link to comment
Share on other sites

1 hour ago, PMookie said:

It’s worth it. I’ve done it twice now. The results in the fitting are blatantly obvious if the fitter really fine tunes everything.

Did any of your specs change between the two fittings? 

  • Like 1

Follow my golf journey to break into the 80s

Current tester for the Titleist TSi Driver

Spring 2020 MGS Tester for the Fujikura Motore X Shaft

Updated 4/27/2021
Driver:titelist-small: TSi 2 - Graphite Design AD-XC 6S
Hybrids:taylormade-small: SIM Max 3H, 4H - Matrix Ozik 85S
Irons:srixon-small: ZX5 5 - PW - Accra 95 icwt S
Wedges: :cleveland-small: CBX 2 54, CBX Full Face 58 - Nippon Modus 105 Wedge
Putter:  :odyssey-small: Two Ball Ten S Tour Lines - 31"
 

Link to comment
Share on other sites

48 minutes ago, dlow206 said:

Did any of your specs change between the two fittings? 

It’s hard to say because head weighting, internal shaft weighting, head shape, etc aren’t factors in the SeeMore fitting. From a length/loft/lie perspective, no, but I went from a mallet to a blade, Edel round grip, toe-up, torque balanced head, change in head weight, internal weighting, face tech, etc.... There’s a lot that goes into an Edel fitting.

  • Like 1

Driver: :cobra-small: King F9 Speedback/:callaway-small:Epic Max LS, Xphlexxx Busa 2 Liquid, XX stiff, 45”

Fwy:  :callaway-small: Epic Speed 4w, MMT 80X

Hybrid: :callaway-small: X2 Hot Pro, 20*, Graphite Design Tour AD-DI 105X

Irons: :honma:TR20 Tour P 4-10, :Nippon: Modus 130 stiff, +1”

Wedges: :edel-golf-1: SMS 50D/54V/58D:Nippon:Modus 130 stiff, +1”

Putter:  :edel-golf-1: EAS 1.0

All but putter have Lamkin ST+2 Hybrid Calibrate midsize built to oversize +1

Link to comment
Share on other sites

That looks saweeeet!  

  • Like 1
  • TaylorMade SIM2 8* Mitsubishi Tensei 1K White 60X
  • TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X
  • Mizuno HMB MP20 3i Nippon Modus 3 120S
  • Ben Hogan PTx Combo Nippon Modus 3 120S
  • Vokey SM8 50 Nippon Modus 3 120s
  • TaylorMade MG2 TW 56 & 60 Nippon Modus 3 120S
  • Scotty Cameron Phantom X 11.5
  • TaylorMade TP5

 

Western, NY

5.7 Index

Link to comment
Share on other sites

  • 9 months later...
On 10/1/2020 at 6:02 AM, bens197 said:

That looks saweeeet!  

Do you need a special wrench to change out the aiming plates?

"Everyday takes figuring out all over again how to f***ing live."  Calamity Jane - Deadwood.

People ask me what I do for a living?  I say "I answer stupid questions."

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...