Grit Golf Posted October 2, 2020 Share Posted October 2, 2020 I got fit for a Ping G410 3 wood with the Tour 75 shaft in stiff on 8/28, 5 weeks later (today) I call the shop that fit me and they looked it up in Pings system, it still has a status of “processing” with no estimated ship date. The shop said it has happened before when they run out of a shaft or a head. Anyone else experience this? fixyurdivot 1 Quote “He’s a Cinderella story. A former assistant groundskeeper about to become the Masters champion. It looks like a mirac… It’s in the hole! It’s in the hole! It’s in the hole!” — Carl Spackler Link to comment Share on other sites More sharing options...
Jim418 Posted October 5, 2020 Share Posted October 5, 2020 I ordered a 3 wood and hybrid immediately after a fitting on June 12. 3-4 week delivery. I got the 3-wood after about 6 weeks. Had the wrong grip and the wrong head. Just got the replacement club a week ago. I did not receive the hybrid and cancelled it a couple of weeks ago. Apparently the Tour 85 shaft wasn't available and when it became available, then the head wasn't available. When they said the expected production date was Oct 1 I cancelled since our season will be done by the time I'd get it. fixyurdivot 1 Quote Driver: Titliest TSi3 - Tensei white stiff Wood: PING G425 LST 14.5* - Tensei orange stiff Hybrid: PING G425 19* - Tensei orange stiff Irons: PING i525 - Project X I/O 5.5 - 4-W Wedges: Taylormade MG3 52* and HiToe 56* Project X I/O 6.0 Putter: TM Spider X HYDROBLAST (33", 3* upright) Link to comment Share on other sites More sharing options...
jdietrich Posted October 9, 2020 Share Posted October 9, 2020 (edited) Spoke with the Ping Rep on Monday at my local shop and he said getting a 3 wood for me would have been 10 week minimum as of Monday. Apparently, the heads or shafts aren’t coming in on time he told me Edited October 9, 2020 by jdietrich fixyurdivot 1 Quote Driver- Rogue ST LS 3W- Sim TI 5W- Apex UW UI- T200 3 iron Irons- Vapor Pro 5-9 SM8 46* SM9 50* SM9 55* Jaws 59* Link to comment Share on other sites More sharing options...
russtopherb Posted October 9, 2020 Share Posted October 9, 2020 Every OEM has been experiencing supply chain delays. Some of them are due to product that wasn't created due to factory shutdowns, some of them are due to extremely long shipping times as every shipper has been overwhelmed for quite some time. Ping was very up front about closing their facility early on and taking specific steps to slowly reopen in order to protect their employees health. As a result, Ping is one of many manufacturers across every industry that is having much longer than usual shipping times. fixyurdivot 1 Quote In my carry bag: ST-X 10.5* Kai'li Blue R Flex ST-Z 15* Kai/li Blue R Flex ST-Z 4h Linq Blue R Flex Launcher 5h Launcher CBX 6i-PW CBX 54* & 58* Huntington Beach #10 e12 Contact CURRENTLY TESTING - Mizuno Long Game Link to comment Share on other sites More sharing options...
Golfspy_CG2 Posted October 9, 2020 Share Posted October 9, 2020 PING is getting back to "normal" But still running about 4 weeks. Your store manager can call them and find out exactly where it is in the processing time. I've done it before and gotten answers for customers. Rickp, fixyurdivot and JohnSmalls 3 Quote G430 Max 10K TSiR1 15.0 Aldlia Ascent 60g TSR2 18.0 PX Aldila Ascent 6og TSi1 20 Aldila Ascent Shafts R T350 5-GW SteelFiber I80 SM10 48F/54M and58K S159 48S/52S/56W/60B Select 5.5 Flowback 35" ProV1 Play number 12 Link to comment Share on other sites More sharing options...
Rickp Posted October 10, 2020 Share Posted October 10, 2020 PING is getting back to "normal" But still running about 4 weeks. Your store manager can call them and find out exactly where it is in the processing time. I've done it before and gotten answers for customers. I ordered G710 irons a little more than 10 weeks ago. Original promise date was 3 weeks. I’m not upset yet, we’re dealing w unprecedented times. Sent from my iPhone using MyGolfSpy fixyurdivot, aerospace_ray, JohnSmalls and 1 other 2 2 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
Golfspy_CG2 Posted October 10, 2020 Share Posted October 10, 2020 18 minutes ago, Rickp said: I ordered G710 irons a little more than 10 weeks ago. Original promise date was 3 weeks. I’m not upset yet, we’re dealing w unprecedented times. Sent from my iPhone using MyGolfSpy Rick. Wow, even in these times that seems longer than i would have thought. Have you had your dealer check directly with PING? Rickp 1 Quote G430 Max 10K TSiR1 15.0 Aldlia Ascent 60g TSR2 18.0 PX Aldila Ascent 6og TSi1 20 Aldila Ascent Shafts R T350 5-GW SteelFiber I80 SM10 48F/54M and58K S159 48S/52S/56W/60B Select 5.5 Flowback 35" ProV1 Play number 12 Link to comment Share on other sites More sharing options...
fixyurdivot Posted October 10, 2020 Share Posted October 10, 2020 I'll bet we're now just seeing the lag time in the supply chain. Many of the major OEM's keep a healthy inventory of the most popular components and they've consumed those. Being a supply chain specialist during the C19 event must be a major PITA... so much uncertainty that guesstimates are being made on top of guesstimates. Even if the physical product is at the ready, then comes the shipping part - much of which is international and China centric. Quote G410 Plus, 9 Degree Driver G400 SFT, 16 Degree 3w G400 SFT, 19 Degree 5w ZX5 Irons 4-AW Glide 2.0 56 Degree SW (removed from double secret probation ) ER5v Putter (Evnroll ER5v Official Review) AI-One Milled Seven T CH (Currently Under Product Test) Link to comment Share on other sites More sharing options...
Chip Strokes Posted October 10, 2020 Share Posted October 10, 2020 4 minutes ago, fixyurdivot said: I'll bet we're now just seeing the lag time in the supply chain. Many of the major OEM's keep a healthy inventory of the most popular components and they've consumed those. Being a supply chain specialist during the C19 event must be a major PITA... so much uncertainty that guesstimates are being made on top of guesstimates. Even if the physical product is at the ready, then comes the shipping part - much of which is international and China centric. guesstimates on guesstimates is right. when you get a lead time, it’s a real-time quote. by the time your product has stocked, been built, and is ready to ship, that lead time you were given is obsolete. i just pulled out of a pretty big deal in china for this exact reason. when we were negotiating contracts, the lead time was 4-5 months which i was good with. now it’s 7-8 months. i can’t make an investment when i believe that lead time will only keep sliding further out of my favor. china had a stranglehold on global manufacturing for a long time and they’ve lost it because of covid. JohnSmalls, MAgolfer and fixyurdivot 3 Quote SIM2 8º | KuroKage XD 70TX SIM 3W 14º | Fujikura Atmos Black Tour Spec 9TX SIM2 5W 18º | Fujikura Ventus Black 10X U500 2i | Fujikura Ventus HB Black 10TX T100 4-PW | Dynamic Gold X7 SM6 52* SM8 56* SM8 60* | Dynamic Gold Tour Issue X100 DW | BGT Stability Tour Link to comment Share on other sites More sharing options...
JohnSmalls Posted October 10, 2020 Share Posted October 10, 2020 You’re not alone. My G400 driver fractured on the hosel at the end of August. The replacement ordered was delayed because of not having the shaft in stock and has been delayed again now due to not having a 9* LH head. It’s a little frustrating, but Ping has been transparent and are very gracious to warranty a G400, so I’m not upset. At the end of the day, it’s just a golf club and I get to look forward to the anticipation of that long brown box showing up! Hang in there! fixyurdivot 1 Quote Gameday Vessel Sunday 2.0/ Ogio Silencer Dynapwr Carbon | Hzrdus Smoke Black Mavrik 3w | Evenflow Riptide FG Tour F5 Hybrid(20,23) | MCA Fubuki Staff Model CB 5-PW | DG 120 Vokey SM7 (50, 54, 58) | DG 120 Studio Stock 15 -ProV1x (left dash) Romans 10:9 Classic Bag Jones Collegiate Clemson Stand Bag Eye 2 Laminate 1973 Staff Dynapower 4-PW Anser DUO Link to comment Share on other sites More sharing options...
Rickp Posted October 10, 2020 Share Posted October 10, 2020 Rick. Wow, even in these times that seems longer than i would have thought. Have you had your dealer check directly with PING?Yes, last ship date was supposed to be last week.I’m getting a bit itchy as I can hear “Titleist irons” calling out to me.Sent from my iPhone using MyGolfSpy JohnSmalls and cnosil 2 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
RSS Posted October 13, 2020 Share Posted October 13, 2020 Ping should just release the G425 series as they have in Asia and Australia. I am waiting on a driver and really like the G410 and have heard the G425 has better MOI and graphics. Rickp 1 Quote Link to comment Share on other sites More sharing options...
Rickp Posted October 13, 2020 Share Posted October 13, 2020 I got an update today on the Ping G710 irons.The holdup is and has been the Recoil Shafts and should ship end of October. I can live w that if everything is what I wanted.My birthday is end of the month so would be fitting if they came in then.Sent from my iPhone using MyGolfSpy russtopherb, aerospace_ray and Golfspy_CG2 3 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
Grit Golf Posted October 13, 2020 Author Share Posted October 13, 2020 I’m going on 7 weeks, the shop told me the last 3 wood ordered from Ping ahead of me took 8.5 weeks. I think it’s a shaft availability issue, the Tour 75 is made by UST Mamiya (like the recoils @Rickp ) - UST must’ve been impacted by all this as well. It’s hard to blame Ping, but unfortunately these delays are eating into the little bit of the golf season that I still have up here. What a weird year! Rickp 1 Quote “He’s a Cinderella story. A former assistant groundskeeper about to become the Masters champion. It looks like a mirac… It’s in the hole! It’s in the hole! It’s in the hole!” — Carl Spackler Link to comment Share on other sites More sharing options...
Jim418 Posted October 16, 2020 Share Posted October 16, 2020 On 10/9/2020 at 4:04 PM, russtopherb said: Every OEM has been experiencing supply chain delays. Some of them are due to product that wasn't created due to factory shutdowns, some of them are due to extremely long shipping times as every shipper has been overwhelmed for quite some time. Ping was very up front about closing their facility early on and taking specific steps to slowly reopen in order to protect their employees health. As a result, Ping is one of many manufacturers across every industry that is having much longer than usual shipping times. When I got fitted by PING on June 12 they told me 3-4 weeks. They were not up front about the delivery times. Sounds like they are doing it now, but they were not earlier on. Quote Driver: Titliest TSi3 - Tensei white stiff Wood: PING G425 LST 14.5* - Tensei orange stiff Hybrid: PING G425 19* - Tensei orange stiff Irons: PING i525 - Project X I/O 5.5 - 4-W Wedges: Taylormade MG3 52* and HiToe 56* Project X I/O 6.0 Putter: TM Spider X HYDROBLAST (33", 3* upright) Link to comment Share on other sites More sharing options...
Rickp Posted October 16, 2020 Share Posted October 16, 2020 I’m going on 7 weeks, the shop told me the last 3 wood ordered from Ping ahead of me took 8.5 weeks. I think it’s a shaft availability issue, the Tour 75 is made by UST Mamiya (like the recoils [mention=69092]Rickp[/mention] ) - UST must’ve been impacted by all this as well. It’s hard to blame Ping, but unfortunately these delays are eating into the little bit of the golf season that I still have up here. What a weird year!I heard today that the G710 are still on for shipping last week October. The Recoil shafts are still promised then. We’ll see.My guy is on them every 3 days for updates.Sent from my iPhone using MyGolfSpy Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
russtopherb Posted October 17, 2020 Share Posted October 17, 2020 13 hours ago, Jim418 said: When I got fitted by PING on June 12 they told me 3-4 weeks. They were not up front about the delivery times. Sounds like they are doing it now, but they were not earlier on. Speaking as someone who works for a (non-golf) manufacturer that ships worldwide, supply chain and shipping times got increasingly worse as things dragged on. I'm going to lean more towards "continued delays in getting materials pushed out delivery times" rather than "misrepresented delivery times". Rickp 1 Quote In my carry bag: ST-X 10.5* Kai'li Blue R Flex ST-Z 15* Kai/li Blue R Flex ST-Z 4h Linq Blue R Flex Launcher 5h Launcher CBX 6i-PW CBX 54* & 58* Huntington Beach #10 e12 Contact CURRENTLY TESTING - Mizuno Long Game Link to comment Share on other sites More sharing options...
Rickp Posted October 17, 2020 Share Posted October 17, 2020 Speaking as someone who works for a (non-golf) manufacturer that ships worldwide, supply chain and shipping times got increasingly worse as things dragged on. I'm going to lean more towards "continued delays in getting materials pushed out delivery times" rather than "misrepresented delivery times".Yup, have to agree. My G710 heads are ready and awaiting the Recoil shafts. Sent from my iPhone using MyGolfSpy Golfspy_CG2 1 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
Golfspy_CG2 Posted October 17, 2020 Share Posted October 17, 2020 26 minutes ago, Rickp said: Yup, have to agree. My G710 heads are ready and awaiting the Recoil shafts. Sent from my iPhone using MyGolfSpy Man. Recoil 710’s and TSi2, you are going to be the most decked out “Playa” in The Villages! dlow206 and Rickp 1 1 Quote G430 Max 10K TSiR1 15.0 Aldlia Ascent 60g TSR2 18.0 PX Aldila Ascent 6og TSi1 20 Aldila Ascent Shafts R T350 5-GW SteelFiber I80 SM10 48F/54M and58K S159 48S/52S/56W/60B Select 5.5 Flowback 35" ProV1 Play number 12 Link to comment Share on other sites More sharing options...
Rickp Posted October 17, 2020 Share Posted October 17, 2020 Man. Recoil 710’s and TSi2, you are going to be the most decked out “Playa” in The Villages! At least the Bag will look good Sent from my iPhone using MyGolfSpy Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
Grit Golf Posted November 13, 2020 Author Share Posted November 13, 2020 (edited) I got my 3 wood! It took 11 weeks from when the order was placed. My fitter said the delays were not due to component availability alone, it was that plus a huge COVID shutdown in Arizona (where the ping factory is). Apparently their factory was closed for 6.5 weeks, and they came back to an 8,000+ order backlog. Apparently Ping is still not caught up, and they are still not at 100% staffing due to the virus. My fitter said they didn’t get any heads up from Ping, and had to figure it out once customers orders were in the week 5-6 range. As a result they stopped fitting people into Ping until January, because they are worried someone will end up waiting to get a G410 weeks after G425 is already released, and the customer will be mad at them as a result. It’s hard to fault Ping entirely for what is an “act of God” type situation, but the fitter said bluntly that Ping put them in a bad spot with the way things went down. I’m just glad to have my club and a few decent days left in the season here! Edited November 13, 2020 by Grit Golf fixyurdivot and Rickp 2 Quote “He’s a Cinderella story. A former assistant groundskeeper about to become the Masters champion. It looks like a mirac… It’s in the hole! It’s in the hole! It’s in the hole!” — Carl Spackler Link to comment Share on other sites More sharing options...
Gary1969 Posted February 17, 2021 Share Posted February 17, 2021 I'm in Spain and was fitted for G425 irons , hybrid and driver , was told 3 weeks and maybe less for delivery , I'm a purchasing manager for a car manufacturer and told them there is no way this will happen . Brexit and a pandemic will definitely affect it.............. 4 weeks later , still not here. fixyurdivot, Rickp and Micah T 2 1 Quote Link to comment Share on other sites More sharing options...
fixyurdivot Posted February 17, 2021 Share Posted February 17, 2021 On 10/10/2020 at 8:55 AM, JohnSmalls said: You’re not alone. My G400 driver fractured on the hosel at the end of August. The replacement ordered was delayed because of not having the shaft in stock and has been delayed again now due to not having a 9* LH head. It’s a little frustrating, but Ping has been transparent and are very gracious to warranty a G400, so I’m not upset. At the end of the day, it’s just a golf club and I get to look forward to the anticipation of that long brown box showing up! Hang in there! They should loan you a G410 as consolation. I was told that PING is focusing all build priority on the G425 series and that orders for G410, etc., are now showing deliveries in early summer - that's kind of nuts when you think about it. John Barba thinks we're just starting to see the front end of some long lead times on various make/model equipment. He cited some large shipping containers, stuffed with golf product, lost in storms in December. I wonder if this means a second round of product cycle release delays? Rickp and JohnSmalls 2 Quote G410 Plus, 9 Degree Driver G400 SFT, 16 Degree 3w G400 SFT, 19 Degree 5w ZX5 Irons 4-AW Glide 2.0 56 Degree SW (removed from double secret probation ) ER5v Putter (Evnroll ER5v Official Review) AI-One Milled Seven T CH (Currently Under Product Test) Link to comment Share on other sites More sharing options...
txgolfjunkie Posted February 17, 2021 Share Posted February 17, 2021 This doesn't bode well for my anticipation of the Glide 3.0 wedges I ordered 1/5...just curious how long my G425LST 3 wood will take to arrive. fixyurdivot, JohnSmalls and Rickp 2 1 Quote Cobra Connect 5 Competitor - Team Chad King Radspeed 10.5* w/ Hzrdus RDX Blue 60 6.5 tipped 1/2" - Peacoat/Red King Radspeed Big Tour 3 Wood w/ Hzrdus RDX Blue 70 6.5 Tipped 1/2" King Radspeed Tour 5 Wood w/ Motore X F1 70 X Flex King Utility 4 21* w/ Tensei Pro White 100 X Flex King Tour MIM Copper Irons 5-G w/ AMT White X100 Onyx King MIM Black Wedges 55* & 60* w/ AMT White X100 Onyx Spider SR Pro V1x Left Dash Lefty Link to comment Share on other sites More sharing options...
Shank Aaron Posted February 17, 2021 Share Posted February 17, 2021 If this gives anyone insight- I have a total of 67 individual G425 series clubs (not including irons, putters, or wedges) that all had a confirmed shipping date of 2/8. As of this morning I've received a total of 8 of those orders. 27 have shipped and are currently delayed due to weather (all of them are on the same truck stuck in Texas since 2/11). The other 32 have not left the "In Production" status. A set of G710 irons I ordered back in early November had a delivery date of 1/5 at the time of order now has a delivery date of 3/3. Ping is basically a blind guy in a whorehouse right now and the weather isn't doing them any favors. MattF, JohnSmalls, tony@CIC and 4 others 5 2 Quote Shank's Tentative 2024 WITB O.B. Finder- Paradym Smoke Ai TD 9*/Ventus TR Blue 6X +1/D FW- Callaway UW 17*/VA Composites Nemesys 7X 4H- Paradym Super Hybrid/Ventus Velo Blue 8X 5-AW- Apex 21 $-Taper 120S Blackout- (almost time for a new set of something....) Spoons- Vokey Jet Black SM9 50.08 F/54.10 S/58.08 M Jet Black/Accra iWedge Tour (Until the SM10's drop) Flat One- Bettinardi Hive Poison Kool-Aid Innovai 6.0 Left Dash ALL DAY/14-way Vessel Players 4 (Thank GOD they finally fully enclosed each club pocket) Link to comment Share on other sites More sharing options...
txgolfjunkie Posted February 17, 2021 Share Posted February 17, 2021 1 hour ago, Shank Aaron said: If this gives anyone insight- I have a total of 67 individual G425 series clubs (not including irons, putters, or wedges) that all had a confirmed shipping date of 2/8. As of this morning I've received a total of 8 of those orders. 27 have shipped and are currently delayed due to weather (all of them are on the same truck stuck in Texas since 2/11). The other 32 have not left the "In Production" status. A set of G710 irons I ordered back in early November had a delivery date of 1/5 at the time of order now has a delivery date of 3/3. Ping is basically a blind guy in a whorehouse right now and the weather isn't doing them any favors. Texas isn't thawing out until Monday. What a cluster. I ordered clubs with Srixon, Ping and TaylorMade. Srixon lived up to their quote of 3-4 weeks. TaylorMade has another 1.5 weeks for their 4 week window. Ping? Who knows. If the wedges don't come in the next two weeks, I'll take my business elsewhere. fixyurdivot and tony@CIC 2 Quote Cobra Connect 5 Competitor - Team Chad King Radspeed 10.5* w/ Hzrdus RDX Blue 60 6.5 tipped 1/2" - Peacoat/Red King Radspeed Big Tour 3 Wood w/ Hzrdus RDX Blue 70 6.5 Tipped 1/2" King Radspeed Tour 5 Wood w/ Motore X F1 70 X Flex King Utility 4 21* w/ Tensei Pro White 100 X Flex King Tour MIM Copper Irons 5-G w/ AMT White X100 Onyx King MIM Black Wedges 55* & 60* w/ AMT White X100 Onyx Spider SR Pro V1x Left Dash Lefty Link to comment Share on other sites More sharing options...
HeathS16 Posted February 17, 2021 Share Posted February 17, 2021 Texas isn't thawing out until Monday. What a cluster. I ordered clubs with Srixon, Ping and TaylorMade. Srixon lived up to their quote of 3-4 weeks. TaylorMade has another 1.5 weeks for their 4 week window. Ping? Who knows. If the wedges don't come in the next two weeks, I'll take my business elsewhere. Ordered a 4 iron last Nov. still no shipment. Projected is now 2/22... we will see if that happens. Very bummed. Sent from my iPhone using MyGolfSpy tony@CIC 1 Quote Driver: TSi3 Tester Check out the Review HERE 2-Iron- 699-U 5-Wood: Pro (18*) Irons : i210 4-PW Wedges: RTX-4 50* and 54* RTX-3 *58 Putter: Impact No. 3 Ball: MAXFLI TOUR Tracked by: Bag: BagBoy ZTF Stand Bag (REVIEW HERE) Link to comment Share on other sites More sharing options...
BKordon Posted February 17, 2021 Share Posted February 17, 2021 4 hours ago, Shank Aaron said: If this gives anyone insight- I have a total of 67 individual G425 series clubs (not including irons, putters, or wedges) that all had a confirmed shipping date of 2/8. As of this morning I've received a total of 8 of those orders. 27 have shipped and are currently delayed due to weather (all of them are on the same truck stuck in Texas since 2/11). The other 32 have not left the "In Production" status. A set of G710 irons I ordered back in early November had a delivery date of 1/5 at the time of order now has a delivery date of 3/3. Ping is basically a blind guy in a whorehouse right now and the weather isn't doing them any favors. For what this is worth, supply chain challenges are not isolated to a single industry. We have to purchase spirits from our state controlled distributor and they are running at about 20-25% out of stocks on warehoused items. Big brands, Bacardi, Crown Royal, Smirnoff, ETC. Times between shipments are running in the 45-60 day time frame and due to this, those of us who are paying attention are buying inventory accordingly, which in turn adds to the overall shortages. I'm glad I have the space to mostly order accordingly to what our customers look for. Specialty items are a different animal, but the issues are widespread. I expect supply chain issues to not be fully corrected for another year, based on what I'm seeing. Patience, they tell me..... JohnSmalls and tony@CIC 2 Quote Mizuno ST190, 9 degrees, Fujikura Ventus Black 6S Mizuno ST190, 14 degrees, Fujikura Ventus Black 7S Mizuno ST200 , 18 degrees, Fujikura Ventus Blue 7X Miura CB 301, 4 iron, Fujikura Ventus 9x Miura CB 301, 5-PW Nippon Modus 120S Miura K Grind, 52, 54 and 58, Nippon Modus 130s hand ground by Usher Golf Miura KM 006 LH Link to comment Share on other sites More sharing options...
JohnSmalls Posted February 17, 2021 Share Posted February 17, 2021 17 minutes ago, fixyurdivot said: They should loan you a G410 as consolation. I was told that PING is focusing all build priority on the G425 series and that orders for G410, etc., are now showing deliveries in early summer - that's kind of nuts when you think about it. John Barba thinks we're just starting to see the front end of some long lead times on various make/model equipment. He cited some large shipping containers, stuffed with golf product, lost in storms in December. I wonder if this means a second round of product cycle release delays? I forgot to update this thread. After the heads were restocked, the shaft I ordered was out of stock, but Ping was transparent on lead times and took care of it a little bit earlier than expected back in Oct/early Nov. By the sounds of it they are slammed and going as fast as they possibly can. For the sake of golf, I hope not. Golf has seen a resurgence this past year and I hope it keeps rolling. BKordon and Rickp 2 Quote Gameday Vessel Sunday 2.0/ Ogio Silencer Dynapwr Carbon | Hzrdus Smoke Black Mavrik 3w | Evenflow Riptide FG Tour F5 Hybrid(20,23) | MCA Fubuki Staff Model CB 5-PW | DG 120 Vokey SM7 (50, 54, 58) | DG 120 Studio Stock 15 -ProV1x (left dash) Romans 10:9 Classic Bag Jones Collegiate Clemson Stand Bag Eye 2 Laminate 1973 Staff Dynapower 4-PW Anser DUO Link to comment Share on other sites More sharing options...
fixyurdivot Posted February 17, 2021 Share Posted February 17, 2021 3 hours ago, txgolfjunkie said: Texas isn't thawing out until Monday. What a cluster. I ordered clubs with Srixon, Ping and TaylorMade. Srixon lived up to their quote of 3-4 weeks. TaylorMade has another 1.5 weeks for their 4 week window. Ping? Who knows. If the wedges don't come in the next two weeks, I'll take my business elsewhere. It must be a real PITA trying to run a manufacturing facility and supply chain during C19. Not that it's a walk in the park to start with but, add in workforce loss, new safety protocols, supply chain and shipping disruptions.... well, it's enough to make this guy glad to be retired . On the positive side, at least they are still in business and getting new products launched and orders out...albeit slowly. Rickp, BKordon and JohnSmalls 3 Quote G410 Plus, 9 Degree Driver G400 SFT, 16 Degree 3w G400 SFT, 19 Degree 5w ZX5 Irons 4-AW Glide 2.0 56 Degree SW (removed from double secret probation ) ER5v Putter (Evnroll ER5v Official Review) AI-One Milled Seven T CH (Currently Under Product Test) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.