Jump to content

Recommended Posts

Our Sponsors

Can anyone recommend a loft lie machine?  Not looking to break the bank, just getting started with club fitting and looking to explained my workbench.

Driver:  :callaway-small: Callaway Mavrik Max 9° neutral weight setting - Shaft: Aldila Rogue White 130 MSI 60S, length 44.75"

Wood:  :cobra-small: Cobra King SZ 3 wood 13° - Shaft: (Stock) Mitsubishi Tensei AV Blue 65 Graphite

Hybrid:  :cobra-small: Cobra King SZ 19°-21° - Shaft: (Stock) UST Recoil 480 ESX F4

Irons: :cobra-small: 5-PW Cobra King SZ - Shaft: Nippon N.S. Pro Modus3 Tour 105

Wedges: :vokey-small: Titleist Vokey SM8 54°, 58° - Shaft: (Stock) Wedge Flex

Putter:  :scotty-small: Scotty Cameron X12, length 34"

 :Clicgear: Rovic RV1S

Link to post
Share on other sites
Can anyone recommend a loft lie machine?  Not looking to break the bank, just getting started with club fitting and looking to explained my workbench.

Don’t ignore the used market to save some money.
  • Like 2

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :cleveland-small: 588 54-14, 58-12
Putter:  :taylormade-small:TM-180

Backups:  :bobby-grace-1: 6330,   :EVNROLL: ER2.2,  

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to post
Share on other sites
  • 1 month later...

Mitchell and Scotland used to be the ones to get. Scotland went away and Trublue is the new version of the same. 

Filling the void until trublue came out golf  mechanix and golf works both produced models that were meant for the hobbyist. 

They offered multiple models based on the effort loft and lie adjustments the user was willing to do. 

If you are doing this on the side and dont see much traffic in this area I would look at the GM and GW mid range models or the mitchell used market. 

If you are going to jump into the adjustment game with both feet then look heavily at Trublue or Mitchel then the top end of the GM lines

  • Like 2

Driver - 44.5" 5.0 flex 10.5 deg ACCRA tour Z GP MCC4+ 1 deg closed

Irons - 5-pw, GW stnd length 5.0 flex same grip 1 deg flat. Type low medium offset cavity back, no diggers

Wedges - 56 and 60 tour grind wedge spinner and mcc4+ grip 2 flat 10 and 8 in bounce

Putter - 33" 3 deg loft 70 lie, lrg slight line slightly toe hang

Ball - truvis

Carried in a Sun Mountain C-130 USA bag - BE PROUD.

HC - LH but 85 is a good number, playing in Ohio.

Link to post
Share on other sites
  • 2 weeks later...

I have a True Blue in my garage after years of owning Mitchell Machines. The true blue will bend anything so 1 machine instead of multiple machines is why. Driver to putter, if it’s got a hosel that can be bent, the true blue will do it. 
 

that said they’re not cheap. The used market is a good place to look imo. You can buy a cheap one now or buy a good one and never have to replace it. Mitchell or True Blue would be where I’d go

  • Like 1

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to post
Share on other sites

I do PT club work at a driving range and have the use of an old bending machine.When and if I do buy one, it will be a Tru Blu. 

DRIVER: Cobra F9 10.5  Tensei AV Blue 65g

3W- Callway XR PRO 16 stiff

5W- Alpha- Mitsubishi Diamana  Redboard w/band

Irons- Mizuno JPX 919 Tours with S KBS Tour shafts

Hyrbid- TM 4h mid-rescue

Vokey- Vokey SM5 51 degrees,  SM7 Wedges 54 and 58 1/2 half 3 degrees upright

Putter- Taylor Made Rossa Monza Mini Spider

Ball-ProV1 and AVX

Link to post
Share on other sites

+1 on the True Blue or Mitchell. Both excellent machines with their own benefits, but only if you're serious about club making. If you're not, you may want to consider saving a lot on another cheaper alternative (Golfsmith for example).

When it comes to bending, don't neglect your tools either. As far as I'm concerned, the Mitchell adjustable is the best by far.

Link to post
Share on other sites
On 12/10/2020 at 12:13 PM, dm4 said:

Try Golfworks I use the this one below and it does everything a hobbyist needs.

 

https://www.golfworks.com/golf-mechanix-clubmakers-loft-and-lie-bending-gauge/p/gm1036/

I have the full stand up version of this.  Works great for my needs.  

WITB:  Do I like Titleist or what? 

 

Driver:     TSi2 9* Project X HZRDUS RDX Smoke C3 setting

Fairways   HZRDUS Smoke 13.5* & 19* C3 setting

Driving Iron:   U500 17* Fujikura Blue Ventus HB Velocore 

Irons   T300 4 & 5 iron, T200 6 - W Project X 6.0 1* up

Wedges   SM7 48*, 52*, 56*

Putter    Newport 2

Ball   2020 ProV1

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...