Gerogordon 1 Posted December 2, 2020 Share Posted December 2, 2020 Does anyone know if the Wilson D7 forged irons can easily be bent for lie angle? Would be looking to bend about 2 degrees flat. I believe they're not a totally forged club, more a forged face attached to a cast head. Don't really want to end up with a snapped head so any help much appreciated, thanks. Quote Link to post Share on other sites
cnosil 15,529 Posted December 2, 2020 Share Posted December 2, 2020 3 minutes ago, Gerogordon said: Does anyone know if the Wilson D7 forged irons can easily be bent for lie angle? Would be looking to bend about 2 degrees flat. I believe they're not a totally forged club, more a forged face attached to a cast head. Don't really want to end up with a snapped head so any help much appreciated, thanks. Your best bet would be to talk with a club fitter and/or Wilson golf. If you bend any club there is a chance it will break. 1 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* set to 16.5* w/Project X Hzardous Smoke Hybrids: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 588 54-14, 58-12 Putter: Ten S Backups: 6330, ER2.2, Member: MGS Hitsquad since 2017 Link to post Share on other sites
jddaigneault 1,227 Posted December 2, 2020 Share Posted December 2, 2020 5 hours ago, Gerogordon said: Does anyone know if the Wilson D7 forged irons can easily be bent for lie angle? Would be looking to bend about 2 degrees flat. I believe they're not a totally forged club, more a forged face attached to a cast head. Don't really want to end up with a snapped head so any help much appreciated, thanks. Forged clubs are the most bendable clubs you can get. That being said, if you don’t know what you’re doing...take it to a pro shop and get it bent by a professional. They’re absolutely bendable though. 1 Quote P790s/M5 Driver/F9 3wood/F9 hybrid/MG2 wedges/Ardmore putter Link to post Share on other sites
McGolf 272 Posted December 2, 2020 Share Posted December 2, 2020 Bending the club 2 degree will not be a issue. But as previously posted there is always a possibility for breakage however small. 3 Quote Driver - 44.5" 5.0 flex 10.5 deg ACCRA tour Z GP MCC4+ 1 deg closed Irons - 5-pw, GW stnd length 5.0 flex same grip 1 deg flat. Type low medium offset cavity back, no diggers Wedges - 56 and 60 tour grind wedge spinner and mcc4+ grip 2 flat 10 and 8 in bounce Putter - 33" 3 deg loft 70 lie, lrg slight line slightly toe hang Ball - truvis Carried in a Sun Mountain C-130 USA bag - BE PROUD. HC - LH but 85 is a good number, playing in Ohio. Link to post Share on other sites
Recommended Posts
Our Sponsors
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.