Popular Post DStar Posted February 25, 2021 Popular Post Share Posted February 25, 2021 As #1 was quite successful and came out better than expected I thought I'd have a go at doing another one. After a chat with the pro he recommended that a more traditional blade would be a good one to try and sell so that's what I'm doing. I'm going to do a set of 4 this time, 2 x RH & 2 x LH in both 304SS and carbon steel, so that we can put a couple into the shop for demo. It's all programmed on the mill, I just need a window in the work-load to get them machined. I did have time to do a sample of the face machining to see how it looks as I'm trying to keep the engraving/logo's to a minimum to try and give them a clean look. I'll, hopefully, get them done in time for when we can start playing at the end of March I'll update as I get more done but, as usual, all thoughts & input gratefully received. Steve ejgaudette, txgolfjunkie, fozcycle and 16 others 19 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
DStar Posted February 25, 2021 Author Share Posted February 25, 2021 I'm also trying to think of the options that would make it appealing to buy. So far I've got: Material (304 or CS) Loft Shaft colour/length (using KBS CT Tour that come in a few different colours) Grip Alignment (lines/dots etc) I've also found a UK based headcover maker so could do colour options on that too. What things would you be looking for in a custom putter? ejgaudette, B_R_A_D_Y, GolfSpy_SHARK and 4 others 7 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
ejgaudette Posted February 25, 2021 Share Posted February 25, 2021 4 hours ago, DStar said: As #1 was quite successful and came out better than expected I thought I'd have a go at doing another one. After a chat with the pro he recommended that a more traditional blade would be a good one to try and sell so that's what I'm doing. I'm going to do a set of 4 this time, 2 x RH & 2 x LH in both 304SS and carbon steel, so that we can put a couple into the shop for demo. It's all programmed on the mill, I just need a window in the work-load to get them machined. I did have time to do a sample of the face machining to see how it looks as I'm trying to keep the engraving/logo's to a minimum to try and give them a clean look. I'll, hopefully, get them done in time for when we can start playing at the end of March I'll update as I get more done but, as usual, all thoughts & input gratefully received. Steve Like that face pattern with just the D in the corner very clean. Looking forward to the full line up. GolfSpy_SHARK and DStar 2 Quote Epic Max LS 9° Ventus Blue 6X (2021 Official Review) | Epic Speed 18° Evenflow Riptide 70g 6.0 816 H1 21° Diamana S+ Blue 70 S | SMS 4-5/SMS Pro 6-PW Steelfiber i95 S (2023 Official Review) Glide 4.0 50°.12°S/54°.14°W/58°.6°T PING Z-Z115 Wedge Flex | SOFT 11S Super Stroke Mid-Slim 2.0 Hoofer Bag | Pro V1 | Right Handed | Tracked by V3 Link to comment Share on other sites More sharing options...
Rchang Posted February 25, 2021 Share Posted February 25, 2021 How hard would it be to do slightly curved face like the Sik and Bobby Grace radial putters to get consistent launch and loft off strikes from top to bottom ? Korban61 and GolfSpy_SHARK 2 Quote WITB TS2 10.5 M2 3HL Mavrik Max 5W Titleist 818 4 hybrid Mizuno JPX921 HMP 5-Gap Mizuno S19 56 Maltby TSW 60 Bobby Grace Shiloh putter Link to comment Share on other sites More sharing options...
null Posted February 25, 2021 Share Posted February 25, 2021 6 hours ago, DStar said: I'm also trying to think of the options that would make it appealing to buy. So far I've got: Material (304 or CS) Loft Shaft colour/length (using KBS CT Tour that come in a few different colours) Grip Alignment (lines/dots etc) I've also found a UK based headcover maker so could do colour options on that too. What things would you be looking for in a custom putter? If I’m purchasing a custom putter I want to be able to choose: neck style site lines/dots and location paintfill loft/length/lie Nolan220, fozcycle, GolfSpy_SHARK and 1 other 4 Quote Link to comment Share on other sites More sharing options...
DStar Posted February 25, 2021 Author Share Posted February 25, 2021 1 hour ago, Rchang said: How hard would it be to do slightly curved face like the Sik and Bobby Grace radial putters to get consistent launch and loft off strikes from top to bottom ? It's something I'm looking into... Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
txgolfjunkie Posted February 25, 2021 Share Posted February 25, 2021 7 hours ago, DStar said: I'm also trying to think of the options that would make it appealing to buy. So far I've got: Material (304 or CS) Loft Shaft colour/length (using KBS CT Tour that come in a few different colours) Grip Alignment (lines/dots etc) I've also found a UK based headcover maker so could do colour options on that too. What things would you be looking for in a custom putter? If I'm buying a custom putter I look for: Neck (plumbers, slant/flow, double/single bend) Alignment (lines, dots) Weight (interchangeable weights if production cost allows for it) Shaft (Chrome or matte black) Grip (SuperStroke, Best Grips, Lamkin, etc) Putter color (chrome or dark finish) Of course, this all depends on what you, the putter maker, can handle. I would offer different alignment, shaft and grip options to start with and then expand into other options once business grows. Nolan220, GolfSpy_SHARK and DStar 3 Quote Cobra Connect 5 Competitor - Team Chad King Radspeed 10.5* w/ Hzrdus RDX Blue 60 6.5 tipped 1/2" - Peacoat/Red King Radspeed Big Tour 3 Wood w/ Hzrdus RDX Blue 70 6.5 Tipped 1/2" King Radspeed Tour 5 Wood w/ Motore X F1 70 X Flex King Utility 4 21* w/ Tensei Pro White 100 X Flex King Tour MIM Copper Irons 5-G w/ AMT White X100 Onyx King MIM Black Wedges 55* & 60* w/ AMT White X100 Onyx Spider SR Pro V1x Left Dash Lefty Link to comment Share on other sites More sharing options...
ballplayer002003 Posted February 25, 2021 Share Posted February 25, 2021 In buying a custom putter I would want to choose: neck styles (flow neck for me) Heel shafted loft/lie weight grip paint fill colors putter head finish (raw/oil can/matte etc) engravings sight dot/lines etc I'm excited for you and this new venture you are diving into. DStar, GolfSpy_SHARK and Rickp 3 Quote Driver: Epic Flash Sub Zero Hzdrs Smoke x flex 70g 3 Wood: 917 w/ Diamana Whiteboard stiff 5 Wood : Epic Flash 18* Hzdrs Smoke stiff 4 Hybrid: TSi3 Hzdrs Smoke X flex Irons: 5-7 Apex forged 19 w/ Modus 120 X 9-A Apex Pro 19 w/ Modus 120 X Wedges: MD5 52&56 Jaws Dynamic Gold wedge flex Putter: Scotty Cameron Phantom 5.5 34" Link to comment Share on other sites More sharing options...
Popular Post DStar Posted March 11, 2021 Author Popular Post Share Posted March 11, 2021 (edited) A bit slow with updates on this as the machine has been tied up with other work... Not any more!! I'm pretty chuffed with it so far. Carbon steel, 395g at the moment but have the face machining to do so I reckon around 360g when I'm done. Edited March 11, 2021 by DStar JohnSmalls, Rickp, GolfSpy_SHARK and 7 others 10 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
JohnSmalls Posted March 11, 2021 Share Posted March 11, 2021 On 2/25/2021 at 1:55 AM, DStar said: I'm also trying to think of the options that would make it appealing to buy. So far I've got: Material (304 or CS) Loft Shaft colour/length (using KBS CT Tour that come in a few different colours) Grip Alignment (lines/dots etc) I've also found a UK based headcover maker so could do colour options on that too. What things would you be looking for in a custom putter? Many have been said already, but for the sake of your research: These are what I would look for in order of importance: -Loft/lie/length - head weight - face milling depth or none -material/finish - alignment DStar and MattF 2 Quote Gameday Vessel Sunday 2.0/ Ogio Silencer Dynapwr Carbon | Hzrdus Smoke Black Mavrik 3w | Evenflow Riptide FG Tour F5 Hybrid(20,23) | MCA Fubuki Staff Model CB 5-PW | DG 120 Vokey SM7 (50, 54, 58) | DG 120 Studio Stock 15 -ProV1x (left dash) Romans 10:9 Classic Bag Jones Collegiate Clemson Stand Bag Eye 2 Laminate 1973 Staff Dynapower 4-PW Anser DUO Link to comment Share on other sites More sharing options...
Nolan220 Posted March 11, 2021 Share Posted March 11, 2021 looking good man DStar 1 Quote Speedzone Driver Tensei AV Blue or G400 SFT 10. KBS TD 50 Category 3 shaft King Speedzone Black Yellow Fairway 3 wood Tensei AV Blue 65 F9 SpeedBack Black Grey Fairway 5 Wood ATMOS Tour Spec Blue 7 shaft T300 4i-GW - Tensei AV Blue AM2 Regular Flex or JPX 900 Hot Metal 5 - GW Project X Lz 4.5 Regular Flex Graphite Glide 2.0 SS Wedges 54 & 58 TP Red White Ardmore Putter - BGT Stability Tour Black shaft Precision Pro NX7 range finder Ultralight Cart Bag Link to comment Share on other sites More sharing options...
Popular Post DStar Posted March 15, 2021 Author Popular Post Share Posted March 15, 2021 (edited) Finally got one of each hand finished! Just need to order shafts & grips and off to the pro shop they shall go 344g, brushed 304 stainless steel.. Edited March 15, 2021 by DStar berkeleybob, silver & black, Crashtestdummy and 12 others 13 2 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
JohnSmalls Posted March 15, 2021 Share Posted March 15, 2021 2 hours ago, DStar said: Finally got one of each hand finished! Just need to order shafts & grips and off to the pro shop they shall go 344g, brushed 304 stainless steel.. Those look great! DStar 1 Quote Gameday Vessel Sunday 2.0/ Ogio Silencer Dynapwr Carbon | Hzrdus Smoke Black Mavrik 3w | Evenflow Riptide FG Tour F5 Hybrid(20,23) | MCA Fubuki Staff Model CB 5-PW | DG 120 Vokey SM7 (50, 54, 58) | DG 120 Studio Stock 15 -ProV1x (left dash) Romans 10:9 Classic Bag Jones Collegiate Clemson Stand Bag Eye 2 Laminate 1973 Staff Dynapower 4-PW Anser DUO Link to comment Share on other sites More sharing options...
GolfSpy_SHARK Posted March 15, 2021 Share Posted March 15, 2021 3 hours ago, DStar said: Finally got one of each hand finished! Just need to order shafts & grips and off to the pro shop they shall go 344g, brushed 304 stainless steel.. Incredible nice work DStar 1 Quote Check out my reviews: G710 Irons Official Review I MC Shaft & V Series Putter Official Review 2022 Forged Tec's Official Review I Nitron Push Cart Official Review WITB: Weapons of grass destruction (link to WITB) Traverse is filled with all this shiny metal and tracked by RadSpeed 8* - MotoreX F1 6X SIM 3W - Project X HZRDUS Green U505 Driving Iron 17* - Project X HZRDUS Black SpeedZone 4H - Project X HZRDUS Black 2022 King Forged Tec's 4-PW - KBS $ Tape 130 48 (SM8), 52 & 60 (SM7) - Nippon Modus 125 S ER2VI PROV1X #19 Are you a veteran? Check out the Veterans Golf Association (VGA) Thread! Link to comment Share on other sites More sharing options...
Popular Post DStar Posted March 16, 2021 Author Popular Post Share Posted March 16, 2021 (edited) Had a play with the black oxide treatment we have here at work on the carbon steel head. This one will be going in the bag when we can start playing again here in the UK. Thanks for all the kind words guys, really appreciate them and any feedback: Edited March 16, 2021 by DStar Plumbob, GolfSpy_SHARK, berkeleybob and 10 others 13 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
fozcycle Posted March 16, 2021 Share Posted March 16, 2021 Very nice looking Dstar. What is the Head weight going to be? Have you considered weight ports for future models?Sent from my iPad using MyGolfSpy sirchunksalot, DStar, GolfSpy_SHARK and 1 other 4 Quote Driver: 0311 XF 10.5* w/Project X Cypher 40 gram Senior shaft or 0811 XF 12* w/Evenflo Riptide CB Senior shaft Fairways: 0211 5W & 7W w/ Evenflo Riptide CB regular shaft and Tour Edge E521 9W w/Fubuki HD50 regular shaft Hybrid: None in bag at the moment Irons: Titleist T300 5-PW w/Fubuki MV Senior graphite shafts w/Golf Pride Tour Wedges: Edison forged 49*, 53* and 57* wedges with KB PGI Senior shafts(80 grm). Putter: 33” Evnroll ER6R or ER2 or Bellum Winmore Model 707, or Nike Method Core Drone w/Evnroll Gravity Grip Bag: Vice cart bag(Black/Lime). Ball: Snell MTB Prime X, Maxfli Tour/S/X CG, Titleist Pro V1x or Titleist TruFeel Using Shot Scope X5 and Pinned Rangefinder Link to comment Share on other sites More sharing options...
DStar Posted March 16, 2021 Author Share Posted March 16, 2021 8 minutes ago, fozcycle said: Very nice looking Dstar. What is the Head weight going to be? Have you considered weight ports for future models? Sent from my iPad using MyGolfSpy Thanks Head weight is 344g. I'm looking at another version of this with weights in the rear bumpers to allow adjustment of the balance. JohnSmalls, GolfSpy_SHARK, sirchunksalot and 1 other 3 1 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
Popular Post DStar Posted March 16, 2021 Author Popular Post Share Posted March 16, 2021 Getting a bit carried away now . Decided to have a go at 'torching' one of the 304 heads and I think a fair bit of beginners luck was on hand.. Plumbob, GolfSpy_SHARK, GolfSpy_APH and 10 others 9 4 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
ejgaudette Posted March 16, 2021 Share Posted March 16, 2021 1 hour ago, DStar said: Getting a bit carried away now . Decided to have a go at 'torching' one of the 304 heads and I think a fair bit of beginners luck was on hand.. Another great look here with that torching. I get the beginners luck, its like the first time I make something is the best after that I seem to never quite get it the same again. Keep it up these are looking great. DStar, JohnSmalls and GolfSpy_SHARK 3 Quote Epic Max LS 9° Ventus Blue 6X (2021 Official Review) | Epic Speed 18° Evenflow Riptide 70g 6.0 816 H1 21° Diamana S+ Blue 70 S | SMS 4-5/SMS Pro 6-PW Steelfiber i95 S (2023 Official Review) Glide 4.0 50°.12°S/54°.14°W/58°.6°T PING Z-Z115 Wedge Flex | SOFT 11S Super Stroke Mid-Slim 2.0 Hoofer Bag | Pro V1 | Right Handed | Tracked by V3 Link to comment Share on other sites More sharing options...
Popular Post DStar Posted August 4, 2021 Author Popular Post Share Posted August 4, 2021 Exciting news!! I've sold one of my putters Built to the customers specs. 344g carbon steel - bead blasted then black oxide treatment and they've opted for a simple white paint fill which looks great on the black steel. 3° loft, 72° lie. Just waiting for the custom headcover being made by Scott Readman and it'll be rolling.. Headhammer, Joel C, B_R_A_D_Y and 12 others 9 6 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
ejgaudette Posted August 4, 2021 Share Posted August 4, 2021 4 hours ago, DStar said: Exciting news!! I've sold one of my putters Built to the customers specs. 344g carbon steel - bead blasted then black oxide treatment and they've opted for a simple white paint fill which looks great on the black steel. 3° loft, 72° lie. Just waiting for the custom headcover being made by Scott Readman and it'll be rolling.. Congrats on the sale that's great news. Hopefully the first of many sales ad your pets are looking great. azstu324, GolfSpy_SHARK, DStar and 1 other 2 2 Quote Epic Max LS 9° Ventus Blue 6X (2021 Official Review) | Epic Speed 18° Evenflow Riptide 70g 6.0 816 H1 21° Diamana S+ Blue 70 S | SMS 4-5/SMS Pro 6-PW Steelfiber i95 S (2023 Official Review) Glide 4.0 50°.12°S/54°.14°W/58°.6°T PING Z-Z115 Wedge Flex | SOFT 11S Super Stroke Mid-Slim 2.0 Hoofer Bag | Pro V1 | Right Handed | Tracked by V3 Link to comment Share on other sites More sharing options...
GolfSpy_SHARK Posted August 4, 2021 Share Posted August 4, 2021 5 hours ago, DStar said: Exciting news!! I've sold one of my putters Built to the customers specs. 344g carbon steel - bead blasted then black oxide treatment and they've opted for a simple white paint fill which looks great on the black steel. 3° loft, 72° lie. Just waiting for the custom headcover being made by Scott Readman and it'll be rolling.. Anyone on the site so we can get an unofficial!?! congrats man these putters are pretty incredible! DStar, tommc23 and JohnSmalls 2 1 Quote Check out my reviews: G710 Irons Official Review I MC Shaft & V Series Putter Official Review 2022 Forged Tec's Official Review I Nitron Push Cart Official Review WITB: Weapons of grass destruction (link to WITB) Traverse is filled with all this shiny metal and tracked by RadSpeed 8* - MotoreX F1 6X SIM 3W - Project X HZRDUS Green U505 Driving Iron 17* - Project X HZRDUS Black SpeedZone 4H - Project X HZRDUS Black 2022 King Forged Tec's 4-PW - KBS $ Tape 130 48 (SM8), 52 & 60 (SM7) - Nippon Modus 125 S ER2VI PROV1X #19 Are you a veteran? Check out the Veterans Golf Association (VGA) Thread! Link to comment Share on other sites More sharing options...
DStar Posted August 4, 2021 Author Share Posted August 4, 2021 34 minutes ago, ejgaudette said: Congrats on the sale that's great news. Hopefully the first of many sales ad your pets are looking great. Hopefully 14 minutes ago, Lacassem said: Anyone on the site so we can get an unofficial!?! congrats man these putters are pretty incredible! Unfortunately not but they've tried the demo club and seemed really pleased with it tommc23, GolfSpy_SHARK and JohnSmalls 3 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
Rickp Posted August 4, 2021 Share Posted August 4, 2021 On 3/16/2021 at 5:21 AM, DStar said: Had a play with the black oxide treatment we have here at work on the carbon steel head. This one will be going in the bag when we can start playing again here in the UK. Thanks for all the kind words guys, really appreciate them and any feedback: Very nice! I kinda lost track of this thread. DStar, JohnSmalls and GolfSpy_SHARK 3 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
DStar Posted August 4, 2021 Author Share Posted August 4, 2021 26 minutes ago, Rickp said: Very nice! I kinda lost track of this thread. Thanks. It's not been a busy thread to be honest GolfSpy_SHARK and JohnSmalls 2 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
tommc23 Posted August 5, 2021 Share Posted August 5, 2021 That’s a nice putter well done I hope you get one of the putter hoes here to get one so you can get an unofficial and get some more attention JohnSmalls, DStar and GolfSpy_SHARK 3 Quote Link to comment Share on other sites More sharing options...
Popular Post DStar Posted September 23, 2021 Author Popular Post Share Posted September 23, 2021 (edited) So I decided that, as most blade putters normally have something like a plumber's neck, I decided to make one to try on my own gamer. Need to order a shaft (KBS One Step probably) but it looks like it will sit nicely. The beauty of the way I've made this is that I can machine the location for the shaft to any angle to alter the lie. Right hand version done too Ordered a KBS CT Tour for the pro-shop demo and a One Step for my gamer.. Edited September 23, 2021 by DStar dbdors, MattF, Tom the Golf Nut and 9 others 11 1 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
Popular Post DStar Posted October 17, 2021 Author Popular Post Share Posted October 17, 2021 Had a few games with the new neck & shaft and all is good. Great feel from the shaft. I torched the neck prior to fitting and it came out perfect for colour. The shop demo had a re-buff too: GoBuffs11, ejgaudette, Nolan220 and 7 others 7 3 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
Crashtestdummy Posted October 17, 2021 Share Posted October 17, 2021 13 hours ago, DStar said: Had a few games with the new neck & shaft and all is good. Great feel from the shaft. I torched the neck prior to fitting and it came out perfect for colour. The shop demo had a re-buff too: Wow, impressive. The CNC milling looks excellent. That gold color is stunning. DStar 1 Quote Link to comment Share on other sites More sharing options...
DStar Posted October 18, 2021 Author Share Posted October 18, 2021 Another mod, engraving the logo on the rear cavity this time. Yes or no? 19 hours ago, Crashtestdummy said: Wow, impressive. The CNC milling looks excellent. That gold color is stunning. Thank you ejgaudette, tommc23, Rickp and 2 others 4 1 Quote RADSpeed 9° Matrix Black Tie X-Flex F9 3/4 Wood Aldila NV 2KXV Blue CLK 19° Hybrid Speeder Evo HB S MP54 4-PW Nippon Modus³ Tour 115 X SM8 50° F-Grind SM8 54° F-Grind SM8 58° K-Grind DStar 'Malvern' Putter AVX & -ProV1X Tour-X "Hey mister, your clubs are the wrong way round".. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.