Jump to content

Unofficial Titleist Hybrid-14 bag review


Recommended Posts

Any chance an owner of the Hybrid 14 bag is able to provide a measurement of the distance between the centre of the two hinges? 🙏

measurement.png

  • Like 1

Cobra F8+ Driver
Cobra F9 3-4 Wood
Cobra F8 3 Hybrid
Wilson Staff C300 Forged Irons 4i-GW
Wilson Staff Model Wedges 54° & 60°
Wilson Staff 'The Bean' Putter

Link to comment
Share on other sites

Any chance an owner of the Hybrid 14 bag is able to provide a measurement of the distance between the centre of the two hinges? [emoji120]
measurement.png.70e71091dd697dc64ca444208962727a.png

I had it around 7-7 1/4 if I remember correctly. I was hoping the smaller top of the hybrid 5 also meant a narrower gap but I think they’re the same. My push cart can’t accommodate legs with more than around a 6 inch spacing.

[mention]azstu324 [/mention] can actually measure it for you since I don’t have the bag anymore, but figured I’d share a rough estimate for you.
  • Like 1

#COBRACONNECT CHALLENGE 4 ALUMNUS

:callaway-small: Epic Max LS 10.5 - Motore X F3 6x | :cobra-small: Speedzone 5-wood - Ventus Blue 8s | :titelist-small: TSi3 20* Hybrid - KBS Proto 85s

:cobra-small: KING Forged Tec 5-GW - Nippon Modus 120x | :cobra-small: KING MIM Black 52.12C, 56.10V, 60.04W - Nippon Modus 125 Wedge

:EVNROLL: ER2B | :titelist-small: Pro V1x | :918457628_PrecisionPro: NX9 Slope

 

Link to comment
Share on other sites

Thanks very much mate, that's close enough. I just measured the opening part on my buggy and it's 6" at it's widest too, what a shame 😭

Back to the drawing board.

Cobra F8+ Driver
Cobra F9 3-4 Wood
Cobra F8 3 Hybrid
Wilson Staff C300 Forged Irons 4i-GW
Wilson Staff Model Wedges 54° & 60°
Wilson Staff 'The Bean' Putter

Link to comment
Share on other sites

On 3/17/2021 at 6:54 AM, edingc said:

I like 14-way tops that allow for some flexibility. I don't think I could have gone with the Woode either. The clubs shifting out of place slightly would have bothered me too much!

I switched to a 14-way from a 4-way, and boy I tell ya... What a difference that was! I will never go back to anything less than a 14-way.

  • Like 3

Irons: :mizuno-small: MP-33, Stiff, 3-pw

Hybrid: :taylormade-small: Sim2 Max Rescue, Regular Flex

Driver: :taylormade-small: Sim2 Max D, Regular Flex, 10.5 loft

Righty

Murfreesboro, Tennessee

30 handicap🦽

Link to comment
Share on other sites

  • 3 months later...

This bag fits in a standard push cart contrary to previous comments. The legs just need to be "snapped" in. 

It's a very nice bag.   It also repels water much, much, better than my previous Titleist Sun Mtn bag.   

See attached photos of the bag with the Caddytek push cart (Costco).  I also tested it on a Clickgear at PGA Tour Superstore.   Really happy with the bag after two rounds.

20210709_155948.jpg

20210709_155825.jpg

  • Like 3
Link to comment
Share on other sites

Looks like you have a defective water bottle holder. 😆

What's in my Ping Pioneer Bag
Ping G400 Max 9.5˚, Alta CB 55 S-Flex
XXIO 4w, 7w, 5h, 6h, MP900 Graphite R-Flex
Callaway Apex '21 Forged 6-PW, UST Mamiya Recoil Dart 75 F3
Titleist Vokey Tour Chrome SM8 50.12F, 54.12D, 58.10S, Mitsubishi Tensei Pro AM2 Red R-Flex
LAB Golf DF 2.1 Black with Custom 1+28 Sightlines, BGT Stability Tour Black, LAB Press OG 3.0 Grip
Callaway Chrome Soft #1 Lost Ball on Tour - Mark Crossfield
Link to comment
Share on other sites

8 hours ago, obstacle said:

This bag fits in a standard push cart contrary to previous comments. The legs just need to be "snapped" in. 

It's a very nice bag.   It also repels water much, much, better than my previous Titleist Sun Mtn bag.   

See attached photos of the bag with the Caddytek push cart (Costco).  I also tested it on a Clickgear at PGA Tour Superstore.   Really happy with the bag after two rounds.

20210709_155948.jpg

20210709_155825.jpg

Glad it worked for you! There was no way I was going to be able to snap or lock my legs in there without breaking the legs. It looks like your caddytec top is the older standard clip system where I have the one with firm plastic bars that lock the top of the bag in. Maybe the spacing is narrower on mine than yours. 
 

it’s great to see it working for some folks though. Such a nice bag. 

#COBRACONNECT CHALLENGE 4 ALUMNUS

:callaway-small: Epic Max LS 10.5 - Motore X F3 6x | :cobra-small: Speedzone 5-wood - Ventus Blue 8s | :titelist-small: TSi3 20* Hybrid - KBS Proto 85s

:cobra-small: KING Forged Tec 5-GW - Nippon Modus 120x | :cobra-small: KING MIM Black 52.12C, 56.10V, 60.04W - Nippon Modus 125 Wedge

:EVNROLL: ER2B | :titelist-small: Pro V1x | :918457628_PrecisionPro: NX9 Slope

 

Link to comment
Share on other sites

  • 1 month later...
  • 2 months later...

Not sure if anybody's following this or if it's even a relevant post any more but I found a push cart that works extremely well with the bag

The BagBoy Nitron seems to fit like a glove. I have been looking around feverishly for the past couple of months. I even placed an order for the CaddyTek swivel front wheel from Costco.. I've got a buddy that has the Caddytek explorer V8, which I'm assuming uses the same attachment components as the Swivel offered at Costco. After our round last week and sans-costco order, I asked if I could double check the upper collar to make sure it was going to fit my Hybrid 14.. womp womp womp.. it was way too small and then I completely remembered this thread and a few other posts around the forum talking about Caddytek being one of many that don't work. So I took to the internet and found absolutely NOTHING. I'm just kind of beside myself wondering why there isn't a list out there or more complaints about why this bag just doesn't work with so many carts. You'd think by now that Titleist or someone would have comprised a list of applicable push carts. 

I digress.. 

I did however find a cart that appears to fit like a cabretta leather glove!

The BagBoy Nitron

1109212021.jpg.818d46a9850d8c0cbc347416e5afb628.jpg

At first, the brackets still seem to be too narrow when just pushing the bag straight back. But when I lifted the bag and then slid it down so the brackets actually fit over the top of the legs, this thing is rock solid and wouldn't budge. It's very tight and nothing seems forced as if to push anything to a breaking point. 

1109212017.jpg.67da6925d14544cc6ab24c8c5ba07b55.jpg

1109212018a.jpg.eca49c30a5007277e760115141699b82.jpg

1110211002.jpg.0dacc0d3f3ee4c47aae172233335e228.jpg

I found this one on OfferUp for $150 and it's probably a 9/10 condition. Looks like it was maybe used 10 times. I may end up doing a separate review on the cart after a few rounds but so far it seems like an awesome cart as far as functionality, ease of use, and stability. 

1110211003a.jpg.9cf050974234a95ae486fa7fb8513551.jpg

1110211004.jpg.3051d5b8fdf698af1bccd245b3af0aa8.jpg

1109212027.jpg.d8c0246dee192c7d81bcd7b50bd23343.jpg

Just figured I'd share in case anybody out there is stuck with the same problem. 

 

 

  • Like 1

:mizuno-small: STZ 9.5* / Fujikura MotoreX F3  
:cobra-small:  F6 3 Wood 14* / Fujikura MotoreX F1 
:cobra-small:  King Utility Iron 18.5°/ Kuro Kage Black 

post-76102-0-38507100-1525284411_thumb.jpg  TS-1 3 - P / TT DG 105 (S+) 
post-76102-0-38507100-1525284411_thumb.jpg  TSW Wedges - 50/6 + 56/12
:edel-golf-1:  EAS 1.0 / Grip master 2.0 
:taylormade-small: TP5x

 

 

 

 

Link to comment
Share on other sites

2 hours ago, azstu324 said:

Not sure if anybody's following this or if it's even a relevant post any more but I found a push cart that works extremely well with the bag

The BagBoy Nitron seems to fit like a glove. I have been looking around feverishly for the past couple of months. I even placed an order for the CaddyTek swivel front wheel from Costco.. I've got a buddy that has the Caddytek explorer V8, which I'm assuming uses the same attachment components as the Swivel offered at Costco. After our round last week and sans-costco order, I asked if I could double check the upper collar to make sure it was going to fit my Hybrid 14.. womp womp womp.. it was way too small and then I completely remembered this thread and a few other posts around the forum talking about Caddytek being one of many that don't work. So I took to the internet and found absolutely NOTHING. I'm just kind of beside myself wondering why there isn't a list out there or more complaints about why this bag just doesn't work with so many carts. You'd think by now that Titleist or someone would have comprised a list of applicable push carts. 

I digress.. 

I did however find a cart that appears to fit like a cabretta leather glove!

The BagBoy Nitron

1109212021.jpg.818d46a9850d8c0cbc347416e5afb628.jpg

At first, the brackets still seem to be too narrow when just pushing the bag straight back. But when I lifted the bag and then slid it down so the brackets actually fit over the top of the legs, this thing is rock solid and wouldn't budge. It's very tight and nothing seems forced as if to push anything to a breaking point. 

1109212017.jpg.67da6925d14544cc6ab24c8c5ba07b55.jpg

1109212018a.jpg.eca49c30a5007277e760115141699b82.jpg

1110211002.jpg.0dacc0d3f3ee4c47aae172233335e228.jpg

I found this one on OfferUp for $150 and it's probably a 9/10 condition. Looks like it was maybe used 10 times. I may end up doing a separate review on the cart after a few rounds but so far it seems like an awesome cart as far as functionality, ease of use, and stability. 

1110211003a.jpg.9cf050974234a95ae486fa7fb8513551.jpg

1110211004.jpg.3051d5b8fdf698af1bccd245b3af0aa8.jpg

1109212027.jpg.d8c0246dee192c7d81bcd7b50bd23343.jpg

Just figured I'd share in case anybody out there is stuck with the same problem. 

 

 

Glad you found one that worked!  I really wanted to love that bag as I still think it is one of the best looking outhere, but my Caddytek made it a no go!  The PING traverse is working awesome though and I'm enjoying the cart bag life when I'm not walking with the pushcart.  

  • Like 2

#COBRACONNECT CHALLENGE 4 ALUMNUS

:callaway-small: Epic Max LS 10.5 - Motore X F3 6x | :cobra-small: Speedzone 5-wood - Ventus Blue 8s | :titelist-small: TSi3 20* Hybrid - KBS Proto 85s

:cobra-small: KING Forged Tec 5-GW - Nippon Modus 120x | :cobra-small: KING MIM Black 52.12C, 56.10V, 60.04W - Nippon Modus 125 Wedge

:EVNROLL: ER2B | :titelist-small: Pro V1x | :918457628_PrecisionPro: NX9 Slope

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...