Jump to content
Testers Wanted! Toura Golf Irons Build Test! ×

Hitting net in a cabinet??


TBT

Recommended Posts

Anybody ever seen or made a hitting net in a cabinet??

 

We have a spare bedroom that’s used as an office and I joked that there was enough room for a simulator on the other wall ( the room has 10 foot ceilings) to my surprise my wife said could it all be built into a cabinet with doors so it could be stored away when not in use??

 

So now I’m scouring the web looking to see it it exists!

 

I’m handy, I can build a cabinet, now I just need a net that could be built into a cabinet.

 

Any ideas?

 

 

Sent from my iPad using MyGolfSpy

 

 

:callaway-small: XR Driver Matrix Ozik 8m3 Black Tie Shaft

:cobra-small: King F7 3W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 5W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 4 Hybrid Graphite Designs Tour AD-HY 95 Shaft

PXG 0211 DC 5-PW Mitsubishi MMT 80 Shafts

:cleveland-small: RTX ZIPCORE 50*,54*,58* UST Mamiya Recoil 95 Shafts

:odyssey-small: Metal X Milled #7 with SuperStroke 2.0 grip

:Snell: MTB

 

 



Twitter: @timldotson
Instagram: timldotson
Facebook: TimDotson

Link to comment
Share on other sites

7 minutes ago, TBT said:

 

Anybody ever seen or made a hitting net in a cabinet??

 

We have a spare bedroom that’s used as an office and I joked that there was enough room for a simulator on the other wall ( the room has 10 foot ceilings) to my surprise my wife said could it all be built into a cabinet with doors so it could be stored away when not in use??

 

So now I’m scouring the web looking to see it it exists!

 

I’m handy, I can build a cabinet, now I just need a net that could be built into a cabinet.

 

Any ideas?

 

 

Sent from my iPad using MyGolfSpy

 

What if you just put in one of those movie screens that drop down from the celing. Retract it when not in use. Then you can just use foam balls since its still an office. Plus you can watch movies on it.

Another option is a sliding false wall. Build your screen then install tracks into the celing in front of it and put up the type of wall that separates conference rooms. Slide them open and hit away. That would be a pain but pretty neat.

:titleist-small: Driver, TSi 1 S Flex

:cobra-small: 3 wood, Aerojet Max UST Helium Nanocore R Flex

:cobra-small: 5 wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 7 Wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 5 Hybrid King Tec MMT R Flex

:cobra-small: Irons, Tour UST Recoil 95 R Flex (6 - Gap)

:cobra-small: Wedges, Snakebite KBS Hi- Rev2.0 54* & 60*

:cobra-small: Agera 35"

image.png Ultralight 14-way Cart Bag

Link to comment
Share on other sites

What if you just put in one of those movie screens that drop down from the celing. Retract it when not in use. Then you can just use foam balls since its still an office. Plus you can watch movies on it.
Another option is a sliding false wall. Build your screen then install tracks into the celing in front of it and put up the type of wall that separates conference rooms. Slide them open and hit away. That would be a pain but pretty neat.


I’m not really thinking of doing a projector right now, probably just connect a TV.

Her idea is for me to build a cabinet much like I did for the Murphy Bed in the other guest room that would have the net hanging inside and I could pull out the “wings” and hitting mat.

I’m probably way over simplifying the whole thing


Sent from my iPad using MyGolfSpy

 

 

:callaway-small: XR Driver Matrix Ozik 8m3 Black Tie Shaft

:cobra-small: King F7 3W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 5W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 4 Hybrid Graphite Designs Tour AD-HY 95 Shaft

PXG 0211 DC 5-PW Mitsubishi MMT 80 Shafts

:cleveland-small: RTX ZIPCORE 50*,54*,58* UST Mamiya Recoil 95 Shafts

:odyssey-small: Metal X Milled #7 with SuperStroke 2.0 grip

:Snell: MTB

 

 



Twitter: @timldotson
Instagram: timldotson
Facebook: TimDotson

Link to comment
Share on other sites

25 minutes ago, TBT said:

 


I’m not really thinking of doing a projector right now, probably just connect a TV.

Her idea is for me to build a cabinet much like I did for the Murphy Bed in the other guest room that would have the net hanging inside and I could pull out the “wings” and hitting mat.

I’m probably way over simplifying the whole thing


Sent from my iPad using MyGolfSpy

 

Can you make something like this? Have the doors open to cover the shelves. Then you can have the net inside and connect with screw eyes close to the front edge. This should allow enough room behind the net to prevent bounce back.

IMG_1321.jpg.ca62a766d8735708d8f83c709a839fa5.jpg

:titleist-small: Driver, TSi 1 S Flex

:cobra-small: 3 wood, Aerojet Max UST Helium Nanocore R Flex

:cobra-small: 5 wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 7 Wood, Aerojet Max UST Helium Nanocore R Flex 

:cobra-small: 5 Hybrid King Tec MMT R Flex

:cobra-small: Irons, Tour UST Recoil 95 R Flex (6 - Gap)

:cobra-small: Wedges, Snakebite KBS Hi- Rev2.0 54* & 60*

:cobra-small: Agera 35"

image.png Ultralight 14-way Cart Bag

Link to comment
Share on other sites

Can you make something like this? Have the doors open to cover the shelves. Then you can have the net inside and connect with screw eyes close to the front edge. This should allow enough room behind the net to prevent bounce back.
IMG_1321.jpg.ca62a766d8735708d8f83c709a839fa5.jpg


That’s almost exactly what the Murphy Bed I built looks like


Sent from my iPad using MyGolfSpy

 

 

:callaway-small: XR Driver Matrix Ozik 8m3 Black Tie Shaft

:cobra-small: King F7 3W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 5W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 4 Hybrid Graphite Designs Tour AD-HY 95 Shaft

PXG 0211 DC 5-PW Mitsubishi MMT 80 Shafts

:cleveland-small: RTX ZIPCORE 50*,54*,58* UST Mamiya Recoil 95 Shafts

:odyssey-small: Metal X Milled #7 with SuperStroke 2.0 grip

:Snell: MTB

 

 



Twitter: @timldotson
Instagram: timldotson
Facebook: TimDotson

Link to comment
Share on other sites

Great idea, Where do you live that you can’t go outside?


Sent from my iPhone using MyGolfSpy

Driver: image.png.6ba1c8a254ad57aa05e527b74c2e04ba.png0311 XF 10.5* w/Project X Cypher 40 gram Senior shaft or 0811 XF 12* w/Evenflo Riptide CB Senior shaft

Fairways:  image.png.80321f01fc46450b6f428c7daf7b3471.png0211 5W & 7W w/ Evenflo Riptide CB  regular shaft and Tour Edge E521 9W w/Fubuki HD50 regular shaft

Hybrid: None in bag at the moment

IronsTitleist T300 5-PW w/Fubuki MV Senior graphite shafts w/Golf Pride Tour

Wedges: Edison forged 49*, 53* and 57* wedges with KB PGI Senior shafts(80 grm).

Putter: 33” Evnroll ER6R or  ER2 or Bellum Winmore Model 707,   or Nike Method Core Drone  w/Evnroll Gravity Grip

Bag: Vice cart bag(Black/Lime). 

Ball: Snell MTB Prime X, Maxfli Tour/S/X CG, Titleist Pro V1x or Titleist TruFeel

Using Shot Scope X5 and Pinned Rangefinder

 

Link to comment
Share on other sites

Great idea, Where do you live that you can’t go outside?


Sent from my iPhone using MyGolfSpy


Houston....if I put a simulator in the garage you couldn’t use it for about 5 months a year because it’s 100+ degrees in the garage


Sent from my iPad using MyGolfSpy

 

 

:callaway-small: XR Driver Matrix Ozik 8m3 Black Tie Shaft

:cobra-small: King F7 3W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 5W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 4 Hybrid Graphite Designs Tour AD-HY 95 Shaft

PXG 0211 DC 5-PW Mitsubishi MMT 80 Shafts

:cleveland-small: RTX ZIPCORE 50*,54*,58* UST Mamiya Recoil 95 Shafts

:odyssey-small: Metal X Milled #7 with SuperStroke 2.0 grip

:Snell: MTB

 

 



Twitter: @timldotson
Instagram: timldotson
Facebook: TimDotson

Link to comment
Share on other sites

  • 2 years later...

For finding a net that could be integrated into a cabinet, you might want to explore custom options or DIY projects. With your handy skills, building the cabinet should be a breeze, and finding the right net to fit your design might just take a bit of creativity and research.I recently found a cute Chest of Drawers that doubles as a stylish storage solution for my space. It's amazing how versatile furniture can be when you get creative with it! Anyway, best of luck with your project, and I hope you find the perfect solution for your hitting net cabinet idea.

Edited by FerdinandKola
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...