DriverBreaker Posted May 12, 2021 Share Posted May 12, 2021 (edited) I found some DIY putting training aids online and decided to make my own. Total cost ~ $15, but could be less if you go with 1/2" PVC instead of 1". Materials: 1 x 10ft PVC Pipe 2 x 90* elbow side outlet fitting 2 x elbow fitting 4 x end cap fittings Directions: Cut one 36" length of pipe Cut six 8" lengths of pipe Put it all together as shown in the video. Links to materials: PVC Pipe 90* elbow side outlet fitting Elbow outlet fitting End caps It is easy to disassemble and put back together. If you put it in a bag you could take it to the course with you. Very portable. Edited May 12, 2021 by ChasingScratch 3 1 Quote Instagram: @tony_rosselli_ Training Pre training max driver speed: 124mph Current: 130mph WITB: Driver: G400 LST 8.5* (BROKEN!!) with HZRDUS SMOKE 6.5 70g Woods: 2007 Burner TP 3 wood and 5 wood Irons: Z765 4-PW (1 degree flat) with KBS $-130 shafts Wedges: SM7 50/12/F, 54/10/S and 58/12/D Putter: L.A.B. Directed Force 2.1 Ball: ProV1 Link to comment Share on other sites More sharing options...
MrBandit Posted May 12, 2021 Share Posted May 12, 2021 1 Quote Driver: TaylorMade Stealth HD - 9.0 with NIPPO N.S. Regio Formula MB+ 65 Stiff 3 -Wood: Sub70 949x 3 Wood 15 with Hrdz RDX Black Stiff 5-Wood: SUB70 949x 5 Wood with Hrdz RDX Black stiff 4-Hybrid: TourEdge Exotic C721 with KBS 80 Stiff Irons: Mizuno Pro 225 - 6-PW , w/Nippon Modus 105 stiff Wedges: Taylormade MG3 - 50 ,56, 60 Putter: Odyssey Stroke Lab 7s, 34in Balls: TaylorMade Tour Response, TaylorMade TPx & Snell MTB-X- GPS: LX5 Watch TESTED: SUB70 949X 5 Wood TESTED: NIPPO N.S. Regio Formula MB+ 65 Stiff. TESTED: SkyCaddie LX5 GPS Watch Link to comment Share on other sites More sharing options...
Jimbonecrusher Posted May 13, 2021 Share Posted May 13, 2021 Would have been triple if made out of wood. It's amazing what aids can be made out of a little PVC pipe and a few connectors. The putting gates can be made from 1/2" PVC and a few 90* couplers. 1 Quote Link to comment Share on other sites More sharing options...
StrokerAce Posted May 13, 2021 Share Posted May 13, 2021 Michael Breed has an incredible amount of training aids made out of PVC and swim noodles... 2 Quote I got something to say then I'm gonna say it. Link to comment Share on other sites More sharing options...
Golfspy_Lukes Posted May 13, 2021 Share Posted May 13, 2021 @GolfSpy MPR has entered the chat 4 Quote G410 LST 9* Tour AD DI 6X G425 LST 14.5* Tour AD DI 7X 818 H2 20* Tour AD DI 85X MP20 HMB 4 - Tour AD 95X JPX 919 Tour 5-PW OBAN CT 115X(-) Vokey SM7 52F - 58D PLD Milled Anser 2 Black ProV1 Link to comment Share on other sites More sharing options...
MGrand Posted May 14, 2021 Share Posted May 14, 2021 On 5/12/2021 at 5:25 PM, ChasingScratch said: I found some DIY putting training aids online and decided to make my own. Total cost ~ $15, but could be less if you go with 1/2" PVC instead of 1". Materials: 1 x 10ft PVC Pipe 2 x 90* elbow side outlet fitting 2 x elbow fitting 4 x end cap fittings Directions: Cut one 36" length of pipe Cut six 8" lengths of pipe Put it all together as shown in the video. Links to materials: PVC Pipe 90* elbow side outlet fitting Elbow outlet fitting End caps It is easy to disassemble and put back together. If you put it in a bag you could take it to the course with you. Very portable. Thanks for sharing - I know what I am building this weekend 1 Quote Driver: HiBore XL Tour, Aldila VS Proto Fairway: 980F 15* and 19* Irons: MP-32 5-PW and MX-23 3 -4, Rifle 6.0 Wedges: MP-T4 54*, 60*, TT Dynamic Gold Wedge Flex Putter: Studio Design 1.5 Ball: ProV1x Link to comment Share on other sites More sharing options...
DriverBreaker Posted May 14, 2021 Author Share Posted May 14, 2021 33 minutes ago, MGrand said: Thanks for sharing - I know what I am building this weekend It literally takes just a few minutes. I didn’t glue it together in case I wanted to take it somewhere else or needed to break it down for storage. Once you make your cuts, it’s literally popping the pieces in. 1 Quote Instagram: @tony_rosselli_ Training Pre training max driver speed: 124mph Current: 130mph WITB: Driver: G400 LST 8.5* (BROKEN!!) with HZRDUS SMOKE 6.5 70g Woods: 2007 Burner TP 3 wood and 5 wood Irons: Z765 4-PW (1 degree flat) with KBS $-130 shafts Wedges: SM7 50/12/F, 54/10/S and 58/12/D Putter: L.A.B. Directed Force 2.1 Ball: ProV1 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.