Jump to content

DIY Putting Training aid


Recommended Posts

Posted (edited)

I found some DIY putting training aids online and decided to make my own.  Total cost ~ $15, but could be less if you go with 1/2" PVC instead of 1".

 

Materials:

1 x 10ft PVC Pipe

2 x 90* elbow side outlet fitting

2 x elbow fitting

4 x end cap fittings

 

Directions:

Cut one 36" length of pipe

Cut six 8" lengths of pipe

Put it all together as shown in the video.

Links to materials:

PVC Pipe

90* elbow side outlet fitting

Elbow outlet fitting

End caps 

 

It is easy to disassemble and put back together.  If you put it in a bag you could take it to the course with you.  Very portable. 

Edited by ChasingScratch
  • Like 3
  • Love 1

Instagram:  @tony_rosselli_

Twitter: @GolfSpy_CS

:SuperSpeed:Training

Pre training max driver speed: 124mph

Current: 130mph

WITB:

Driver: :ping-small:G400 LST 8.5* with HZRDUS SMOKE 6.5 70g 

Woods: :taylormade-small: 2007 Burner TP 3 wood and 5 wood

Irons:  :srixon-small: Z765 4-PW (1 degree flat) with KBS $-130 shafts

Wedges:  :vokey-small: SM7 50/12/F, 54/10/S and 58/12/D

Putter: 681811256_Odysseylogo.png.499799aea6663befa411c8db1d859702.png Stroke Lab Ten S 33"

Ball:  :taylormade-small: 2019 TP5X

Link to comment
Share on other sites

 

image.png.a79c736b3baf5f3e57648a266972b699.png

  • Like 1

Driver:  TourEdge Exotic Pro 9.5 with  NIPPO N.S. Regio Formula MB+ 65 Stiff
3 -Wood: Cobra King SZ with Tensei AV Blue Stiff
4-Hybrid: Cobra King F9 Hybrid
Irons: Mizuno MP-18 MMC - 5-PW , w/SteelFiber i125
WedgesCleveland RTX 4 RAW - 52 ,56, 60
Putter: Odyssey Stroke Lab Seven S, 34in
BallsTaylorMade Tour Response, TaylorMade TPx  & Snell MTB-X-
GPS:  :skycaddie: LX5 Watch

TESTING: NIPPO N.S. Regio Formula MB+ 65 Stiff.

 

Link to comment
Share on other sites

Would have been triple if made out of wood.

 

It's amazing what aids can be made out of a little PVC pipe and a few connectors. The putting gates can be made from 1/2" PVC and a few 90* couplers. 

  • Like 1
Link to comment
Share on other sites

Michael Breed has an incredible amount of training aids made out of PVC and swim noodles...

  • Like 2

I got something to say then I'm gonna say it. 

Link to comment
Share on other sites

On 5/12/2021 at 5:25 PM, ChasingScratch said:

I found some DIY putting training aids online and decided to make my own.  Total cost ~ $15, but could be less if you go with 1/2" PVC instead of 1".

 

Materials:

1 x 10ft PVC Pipe

2 x 90* elbow side outlet fitting

2 x elbow fitting

4 x end cap fittings

 

Directions:

Cut one 36" length of pipe

Cut six 8" lengths of pipe

Put it all together as shown in the video.

Links to materials:

PVC Pipe

90* elbow side outlet fitting

Elbow outlet fitting

End caps 

 

It is easy to disassemble and put back together.  If you put it in a bag you could take it to the course with you.  Very portable. 

Thanks for sharing - I know what I am building this weekend 👊👊

  • Like 1

Driver:  :cleveland-small: HiBore XL Tour, Aldila VS Proto 

Fairway:   :titelist-small: 980F 15* and 19* 

Irons:  :mizuno-small: MP-32 5-PW and MX-23 3 -4, Rifle 6.0

Wedges:  :mizuno-small:  MP-T4 54*, 60*, TT Dynamic Gold Wedge Flex

Putter:  :scotty-small:  Studio Design 1.5 

Ball:   :titelist-small: ProV1x

Link to comment
Share on other sites

33 minutes ago, MGrand said:

Thanks for sharing - I know what I am building this weekend 👊👊

It literally takes just a few minutes.  I didn’t glue it together in case I wanted to take it somewhere else or needed to break it down for storage.  Once you make your cuts, it’s literally popping the pieces in.

  • Like 1

Instagram:  @tony_rosselli_

Twitter: @GolfSpy_CS

:SuperSpeed:Training

Pre training max driver speed: 124mph

Current: 130mph

WITB:

Driver: :ping-small:G400 LST 8.5* with HZRDUS SMOKE 6.5 70g 

Woods: :taylormade-small: 2007 Burner TP 3 wood and 5 wood

Irons:  :srixon-small: Z765 4-PW (1 degree flat) with KBS $-130 shafts

Wedges:  :vokey-small: SM7 50/12/F, 54/10/S and 58/12/D

Putter: 681811256_Odysseylogo.png.499799aea6663befa411c8db1d859702.png Stroke Lab Ten S 33"

Ball:  :taylormade-small: 2019 TP5X

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...