Myron Posted June 2, 2021 Share Posted June 2, 2021 I just instinctively purchased a stability tour shaft and wondering if i should install in into my Evnroll. I'm worried I won't like the shaft and will ruin the putter. I think once I install this shaft, the current shaft on the putter is basically garbage. Also unsure if the stability vs stability tour would be better for me. Any input on this shaft in general and this shaft with this putter? Thanks! Quote Link to comment Share on other sites More sharing options...
cnosil Posted June 2, 2021 Share Posted June 2, 2021 You won’t ruin the putter. You don’t have to use/cut the stock shaft and can put the old shaft back in if you don’t like the stability shaft. It is simply epoxied into the head like any other shaft. hard to say which would be better; they have different thicknesses, weights, and balance points. I have tried both the regular and tour and didn’t think they were that special and wouldn’t go out of my way to put one in a putter again. 808nation 1 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: TM-180 Testing: Backups: Milled Collection RSX 2, mFGP2, Futura 5W Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
dlow206 Posted June 2, 2021 Share Posted June 2, 2021 You have the single bend Evnroll? Quote Follow my golf journey to break into the 80s Tester for the Titleist TSi Driver Spring 2020 MGS Tester for the Fujikura Motore X Shaft Updated 07/15/2022 Driver: Rogue St Max LS - Autoflex Fairway Woods: Rogue Max St 3HL and 7 Wood Irons: JPX 921 Hot Metal 5 to AW - Aerotech Steelfiber i95 Stiff parallel tip Wedges: Glide 4.0 54 and 58 Putter: PLD Custom Kushin 4 Link to comment Share on other sites More sharing options...
Myron Posted June 2, 2021 Author Share Posted June 2, 2021 6 hours ago, dlow206 said: You have the single bend Evnroll? Yes 9 hours ago, cnosil said: You won’t ruin the putter. You don’t have to use/cut the stock shaft and can put the old shaft back in if you don’t like the stability shaft. It is simply epoxied into the head like any other shaft. hard to say which would be better; they have different thicknesses, weights, and balance points. I have tried both the regular and tour and didn’t think they were that special and wouldn’t go out of my way to put one in a putter again. Oh okay, I thought i would have to cut the shaft at the bottom to install Quote Link to comment Share on other sites More sharing options...
dlow206 Posted June 2, 2021 Share Posted June 2, 2021 23 minutes ago, Myron said: Yes Oh okay, I thought i would have to cut the shaft at the bottom to install For a single bend putter, you would have to cut from your existing shaft (i don't believe BGT has single bend tips available). I have done it before. Quote Follow my golf journey to break into the 80s Tester for the Titleist TSi Driver Spring 2020 MGS Tester for the Fujikura Motore X Shaft Updated 07/15/2022 Driver: Rogue St Max LS - Autoflex Fairway Woods: Rogue Max St 3HL and 7 Wood Irons: JPX 921 Hot Metal 5 to AW - Aerotech Steelfiber i95 Stiff parallel tip Wedges: Glide 4.0 54 and 58 Putter: PLD Custom Kushin 4 Link to comment Share on other sites More sharing options...
cnosil Posted June 2, 2021 Share Posted June 2, 2021 2 hours ago, dlow206 said: For a single bend putter, you would have to cut from your existing shaft (i don't believe BGT has single bend tips available). I have done it before. Or you could buy another single bend shaft and keep the original EvnRoll shaft intact. That would enable him to return the EvnRoll to exactly how it was before the stability shaft. ST3LTR0 1 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: TM-180 Testing: Backups: Milled Collection RSX 2, mFGP2, Futura 5W Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
dlow206 Posted June 3, 2021 Share Posted June 3, 2021 57 minutes ago, cnosil said: Or you could buy another single bend shaft and keep the original EvnRoll shaft intact. That would enable him to return the EvnRoll to exactly how it was before the stability shaft. Right, that is a possibility. Quote Follow my golf journey to break into the 80s Tester for the Titleist TSi Driver Spring 2020 MGS Tester for the Fujikura Motore X Shaft Updated 07/15/2022 Driver: Rogue St Max LS - Autoflex Fairway Woods: Rogue Max St 3HL and 7 Wood Irons: JPX 921 Hot Metal 5 to AW - Aerotech Steelfiber i95 Stiff parallel tip Wedges: Glide 4.0 54 and 58 Putter: PLD Custom Kushin 4 Link to comment Share on other sites More sharing options...
Myron Posted June 6, 2021 Author Share Posted June 6, 2021 On 6/2/2021 at 7:34 PM, cnosil said: Or you could buy another single bend shaft and keep the original EvnRoll shaft intact. That would enable him to return the EvnRoll to exactly how it was before the stability shaft. This helps! Thank you! Would any single bend shaft work/ do you recommend me using a certain company for quality reasons? Thank you Quote Link to comment Share on other sites More sharing options...
cnosil Posted June 6, 2021 Share Posted June 6, 2021 20 minutes ago, Myron said: This helps! Thank you! Would any single bend shaft work/ do you recommend me using a certain company for quality reasons? Thank you You need to get the right tip size. I would suggest contacting EvnRoll and telling them what you want to do; I would assume that they would provide you with the correct tip size and could possibly tell you the type of shaft that they put in the putters. There aren't that many different putter shafts and they should all be good quality. Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: TM-180 Testing: Backups: Milled Collection RSX 2, mFGP2, Futura 5W Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
dlow206 Posted June 6, 2021 Share Posted June 6, 2021 1 hour ago, Myron said: This helps! Thank you! Would any single bend shaft work/ do you recommend me using a certain company for quality reasons? Thank you 53 minutes ago, cnosil said: You need to get the right tip size. I would suggest contacting EvnRoll and telling them what you want to do; I would assume that they would provide you with the correct tip size and could possibly tell you the type of shaft that they put in the putters. There aren't that many different putter shafts and they should all be good quality. The Evnroll ER2 is 0.370 tip size cnosil 1 Quote Follow my golf journey to break into the 80s Tester for the Titleist TSi Driver Spring 2020 MGS Tester for the Fujikura Motore X Shaft Updated 07/15/2022 Driver: Rogue St Max LS - Autoflex Fairway Woods: Rogue Max St 3HL and 7 Wood Irons: JPX 921 Hot Metal 5 to AW - Aerotech Steelfiber i95 Stiff parallel tip Wedges: Glide 4.0 54 and 58 Putter: PLD Custom Kushin 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.