Jump to content

Club Build & Repair


Club Build & Repair  

22 members have voted

  1. 1. Do you currently or have you ever done club build and/or repair?

    • Yes
      16
    • No
      6
  2. 2. If no, have you ever had the hankering to do so?

    • Yes
      20
    • No
      2
  3. 3. If yes, do you only do your own clubs or also work on others?

    • Only my clubs
      12
    • Mine and others
      10
  4. 4. What goy you interested in doing it?

    • Saving money
      1
    • Just for fun
      6
    • Wanted more control over build
      2
    • One or more of these
      13


Recommended Posts

13 minutes ago, dlow206 said:

I was talking to Mondher from Golf Mechanix about the first machine you posted and this one: https://www.golfworks.com/golf-mechanix-clubmakers-loft-and-lie-bending-gauge/p/gm1036/. He gave an answer i wasn't expecting. He said if you are a traditionalist (traditional lofts), then the one you mentioned first, if more into modern lofts (i.e. expect to bend more modern loft clubs) then the one i mentioned.

Probably very few know who Mondher is

https://mygolfspy.com/mondher-latiri-the-zen-of-golfmechanix/

 

 

 

Great stuff Derrick, thanks!  First I've heard of Mondher and that reply would have surprised me too.

:ping-small: G410 Plus, 9 Degree Driver 

:ping-small: G400 SFT, 16 Degree 3w

:ping-small: G400 SFT, 19 Degree 5w

:srixon-small:  ZX5 Irons 4-AW 

:ping-small: Glide 2.0 56 Degree SW   (removed from double secret probation 😍)

:EVNROLL: ER5v Putter  (Evnroll ER5v Official Review)

 

 

Link to comment
Share on other sites

  • 2 weeks later...

@McGolf You put BB and F Co ferrules on my PXG 0211 irons.  I am thinking about upgrading the ferrules on my wedges myself. I have some BB and F Co ferrules without collars, that I would like on my wedges. I have Callway wedges. A Mack Daddy CB and a couple of MD3 wedges all have steel shafts. My question is, do these Callaway wedges have a shoulder in the hosel that would require a collared ferrule?

 

TaylorMade Supreme Hybrid Stand Bag

Ping G400 Max 10.5° w/HZRDUS Smoke Black

PXG 0341 3 wood 15° w/Project X Even Flow Blue

Ping G30 Hybrid 3 19° w/Ping TFC 419H

Ping G410 Crossover 4 23° w/Mitsubishi Tensei Blue

PXG 0211 Irons 5 - Gap w/True Temper Elevate 95

Callaway Mack Daddy CB 54° W-Grind w/KBS HI-REV 2.0 105

Evnroll ER7 34”

Kirkland Signature V2.0 3 piece 

Mileseey PF210 Laser Rangefinder

Clicgear 3.5+

Link to comment
Share on other sites

  • 2 weeks later...

They do have a collar but when using a steel shaft you can get a way with putting on the Bb and F ferrules. Make sure the fit of the shaft and hosel are tight and it will work

  • Like 1

Driver - 44.5" 5.0 flex 10.5 deg ACCRA tour Z GP MCC4+ 1 deg closed

Irons - 5-pw, GW stnd length 5.0 flex same grip 1 deg flat. Type low medium offset cavity back, no diggers

Wedges - 56 and 60 tour grind wedge spinner and mcc4+ grip 2 flat 10 and 8 in bounce

Putter - 33" 3 deg loft 70 lie, lrg slight line slightly toe hang

Ball - truvis

Carried in a Sun Mountain C-130 USA bag - BE PROUD.

HC - LH but 85 is a good number, playing in Ohio.

Link to comment
Share on other sites

I have a DIY spring loaded shaft puller(Only used for graphite shafts)

I use propane torch for all heat requirements.

I lucked out and bought a Mitchell from the bay quite a few years back for 400.  I am sure the measuring part probably doesn't read correctly, but I use to adjust based on the dry erase marker method, and I bend for loft based on yardages not a notion of equal loft gappings, so I don't care if it is not reading the exact number.

I use the pure grips air installer (When I was going through my shaft testing phase, I got tired of "wasting" grips) so putting them on with air was cheaper.  Cheap pancake air compressor from Home Depot.

I turn my own ferrules if needed, but tend to just order them the correct OD of the hosel.

A drill and numerous drill bits(I end up removing weight from all of my short irons)

Vice to hold the heads when I drill

Small parts plastic organizer.  I hold all of my OEM adapters, screws, ferrules, shims, brass weights, calipers, SS counter core weights, small tools.

ALL-Fit universal hosel adapters, I pull the OEM adapter as soon as I get a new club and use only the All-Fit.

Kitchen scale (to get relatively precise gram measurements)

Golf Works SW scale (While I think matching SW throughout your iron set is stupid) I still use a SW scale to do my poor mans MOI matching.  .33 for 1/4" increments, .5 for 3/8" increments, and .66 for 1/4" increments.

  • Like 2

Driver - Callaway MX LS on Velocore-Powering-Ventus-Web-Alt-660x120.png.aee250669616820d00f429e0c46a332d.png Purple
Fairways - Sim2 on UST Mamiya Black
Hybrid(s) - Cobra King TEC on ust-mamiya-vector-logo-e1579150002556.png.8e70a5366e7cc078a89e7b705c55fe8f.pngRed Hybrid, Callaway Epic 7 wood UST Mamiya Black or Srixon ZXU on ust-mamiya-vector-logo-e1579150002556.png.8e70a5366e7cc078a89e7b705c55fe8f.pngRecoil 110

Irons398699977_srixonlogo.png.79fe2991c2fa6e5a25897c0fb32f0d13.pngZX5 4 & 5iron, and ZX7 6-PW  all on ust-mamiya-vector-logo-e1579150002556.png.8e70a5366e7cc078a89e7b705c55fe8f.pngRecoil 110

Wedges - cleveland-golf-vector-logo.png.425fb59c391d774c79d96b4af840add4.png Zipcore 50*, 54*, and 60*  all on ust-mamiya-vector-logo-e1579150002556.png.8e70a5366e7cc078a89e7b705c55fe8f.pngRecoil 110

Putter - image.png.daabc1cfe5e524adab74c26701e62fb5.png Ocracoke or image.png.6899374f32ce3f490d50912fc5cb89f8.png MA/66 on all on ust-mamiya-vector-logo-e1579150002556.png.8e70a5366e7cc078a89e7b705c55fe8f.pngFrequency Filtered
Ball - Srixon Z Star

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...