Titleist Introduces Next General T-Series Irons

[Golfspy_CG2]

5 hours ago, Kane Carmody said:

I ordered in early July from a rep (T300s with the AMT Red shafts) and they just arrived at my doorstep today.  Was told they were shipping 1st or second week in September so that was a pleasant surprise. Hopefully others have the same luck.

Yep. I received my T300 in MCA’s yesterday.  Got them out for a bit this afternoon snd liked what I saw. 

[dlow206]

3 minutes ago, Golfspy_CG2 said:

Yep. I received my T300 in MCA’s yesterday.  Got them out for a bit this afternoon snd liked what I saw. 

lucky. pics?

[Golfspy_CG2]

Just now, dlow206 said:

lucky. pics?

Just this quick one today. I’ll try to get some full shaft and head pics tomorrow. 
 

 

[dlow206]

2 minutes ago, Golfspy_CG2 said:

Just this quick one today. I’ll try to get some full shaft and head pics tomorrow. 
 

 

Almost full Titleist bag, i like it

[Golfspy_CG2]

3 minutes ago, dlow206 said:

Almost full Titleist bag, i like it

Yep. If the 11.5 Phantom had worked out for me it would have been all.  I may look for a X7M somewhere.   I putted so well with that…so of course I traded it.  Ha 

[KC Golf]

Totally envious about that bag full of awesome clubs… can’t wait to hear about the T-300s. 

[GolfSpy TCB]

On 8/19/2021 at 10:49 AM, Tiftaaft said:

Ordered my T200's yesterday... quoted 4-6 weeks.  We'll see. 

[Finch]

I have 2019 T100 irons in the bag - 3-PW, KBS Tour 120S shafts. I'm very happy with them, but they can get a bit too spinny.

 

There was a Titleist fitting session at my club on Friday and I now have T100S irons on order. Same shaft - weirdly, the KBS Tour gave me the best spin numbers. I was somehow spinning the C Taper and X7 more...??! Very strange. I've ordered a T200 3 iron, and T100S 4-PW. It will mess with my wedge gapping a bit, but I can deal with that. I'm still on the fence about the U505 - it feels great, but I'm pretty happy with my U510.

 

Both the new T100 and T100S feel fantastic - noticeably better than the 2019 models. They should be here in a few weeks, just in time for carpal tunnel surgery and a month off golf.

Edited September 13, 2021 by Finch

[GolfSpy TCB]

Arrived today.  Man they are pretty.

Edited September 17, 2021 by Tiftaaft

[Golfspy_CG2]

11 minutes ago, Tiftaaft said:

Arrived today.  Man they are pretty.

Nice!!  I’ve seen a few sets of T200 in the bags of friends.   They sure look sharp! 

[dlow206]

My 5 to pw t300 order that was supposed to ship next week got delayed one more month. Order was from 8/10.

my gap wedge order t300 that i order a few weeks after that, just got a shipping notification

[Finch]

Mine arrived on Thursday - less than a week from fitting to delivery here in .au. T200 3 iron, T100S 4-PW, KBS Tour 120S shafts, Golf Pride MCC +4 grips.

They are very, very pretty.

 

[RickyBobby_PR]

1 hour ago, MonsterDrive385 said:

Who makes the best irons?

Nobody. The best irons are the ones from whatever brand that works best for the golfer 

[Golfspy_CG2]

31 minutes ago, MonsterDrive385 said:

Money makes no difference to Tiger, he's a billionaire.  He can play what he wants and he chooses TM.  Before he turned pro he played Mizuno.  Rahm pulled a dumb move by leaving TM.  He wanted to play Mizuno but they told him to take a hike so he went to Callaway.

Money making no difference to a billionaire, that may be one of the funniest things ever written on here...well done!

[RickyBobby_PR]

1 minute ago, MonsterDrive385 said:

Rahm was great now he's floundering.  He said he wants to go back to TM.  All the MFGs would do exactly what TM does as far as club design and mfging is concerned.  All of them.

Koepka is a moron none of his decision have any influence.  Only the pros that play TM make sense now.  The others like Rahm only play those clubs because they are paid to play them.

I debated on replying to the last post because of my suspicions. This post proved what I was thinking and you are here to troll and not be serious. 
 

[Golfspy_CG2]

Don't' feed them folks

 

 

[Golfspy_CG2]

Thread cleaned up.  Let's keep it on the topic of the Titleist irons please. 

[dlow206]

My gap wedge came, but still waiting for the rest of the set. Will game the gap wedge in the meantime once my Jumbo max grips arrive. 

[Rickp]

27 minutes ago, Golfspy_CG2 said:

Thread cleaned up.  Let's keep it on the topic of the Titleist irons please. 

Thanks

i was debating posting about getting back to the Thread but you guys beat me too it.

[KC Golf]

 

On 9/18/2021 at 10:00 PM, Finch said:

Mine arrived on Thursday - less than a week from fitting to delivery here in .au. T200 3 iron, T100S 4-PW, KBS Tour 120S shafts, Golf Pride MCC +4 grips.

They are very, very pretty.

 

Wow.  That set looks awesome.  I love the background of wine / liquor and books too.

How does Titleist deliver so quickly in Australia but are logging huge delays in North America!  Sounds like they need to spread their inventory globally in a more efficient manner.  The wait times in Canada appear to be pretty long.

Or we can move to Australia, which doesn't sound that bad to me... 

[Finch]

13 hours ago, KC Golf said:

 

Wow.  That set looks awesome.  I love the background of wine / liquor and books too.

How does Titleist deliver so quickly in Australia but are logging huge delays in North America!  Sounds like they need to spread their inventory globally in a more efficient manner.  The wait times in Canada appear to be pretty long.

Or we can move to Australia, which doesn't sound that bad to me... 

 

Titleist have always been good here, at least in my experience. I've never waited more than a couple of weeks for any of their clubs (it's usually a 7-10 day turnaround). There are occasional issues with Footjoy gear, but that might just be at my club. I think it might have helped that I didn't order a "stock" set but didn't go too far off-piste, either - the KBS Tour shafts are pretty widely available here and the MCC Plus4 grips I specced seem to be readily available here, too. But maybe I just got lucky - there was an outbreak of "the situation" in two other states so their fitting sessions would have been cancelled around the same time I ordered. It's a mystery! I waited months for a Callaway wedge earlier this year, for whatever reason. So who knows.

 

The quarantini shelf lives in my office - it's full of booze that hasn't or won't make it into the cellar, or wine that I've pulled from the cellar for whatever reason but which hasn't yet gone down the hatch. The books are mostly cooking and wine related (I have half a winemaking degree but run a geoscience business - go figure), with some records and other bits and pieces. It makes for a fun work space

 

You're more than welcome to head on over. Year round golf, some of the best courses in the world at really affordable prices. The food is great and the wine is one of our best kept secrets. I've lived in a few other countries and travel a lot in a normal year, but I keep coming home and thinking how good we have it here. Check it out when the world gets back to normal - come on over in early Autumn - March is pretty good. Start in Tasmania and work your way west to Perth via Melbourne and Adelaide, then head over to the Sunshine Coast, Gold Coast, and Sydney. There is so much great golf

Re: The irons... I had carpal tunnel surgery a few days after they arrived and haven't had a chance to try them out on the course. I took them to a simulator to try to figure them out a bit and I was very impressed. They feel great. The numbers were not totally trustworthy so I'm taking them with a few grains of salt, but I could probably go up (down?) a flex to the 130g version, but man, I really need to get my launch angle under control. I'm casting enough to worry myself - which impacts smash and dispersion.

Distances are good, feel is great, dispersion is good, spin (my whole reason for changing from 2019 T100's to 2021 T100S') is still to be figured out. Hopefully I'll be alright to play in a few weeks when twilight season kicks off. But, so far so good!

Edited September 29, 2021 by Finch

[KC Golf]

Will be curious to hear how you hit your new irons. 

I am going to go get fitted for Titleist irons soon. Not sure if I should go with a 200 / 100 combo or even throw 300 into the mix. 

Sadly with Covid golfing in Australia is just dream.  I have only been there on business. But I need an excuse to bring clubs and stay an extra week or two. 

[dlow206]

Got an update on my order and Titleist has no outlook on when my shafts will be in and doesn't have any alternative graphite shafts available. This is for an order from 8/10.

[Finch]

On 9/29/2021 at 11:15 PM, KC Golf said:

Will be curious to hear how you hit your new irons. 

I am going to go get fitted for Titleist irons soon. Not sure if I should go with a 200 / 100 combo or even throw 300 into the mix. 

Sadly with Covid golfing in Australia is just dream.  I have only been there on business. But I need an excuse to bring clubs and stay an extra week or two. 

I can't wait to try them out on course. They were OK on a simulator, but I hit from mats so infrequently that I have no idea how (or if) the feel translates to hitting from grass.

I went with the T200 3 iron because I've already got a (2019) T100 3 iron, which I can hit just fine but I figured the T200 would be a very different club - more of a utility iron than the T100, but not as chunky as a U505. I'm looking forward to reading your thoughts once you get to the fitting

I think we've had a few days of no golf here in my part of Australia - which coincided with the worst of winter, so nobody was really inconvenienced. But you're right - it will be a while before we get many people coming here on golf trips and it'll be a while before we'll head overseas for a golf trip. What a time to be alive, hey?

[dlow206]

An update on my T300 set, long story. So my T300 Tensei AM2 Blue order was delayed indefinitely. MCA shafts are stuck in Vietnam.

So, i found out that there is a shop/club builder locally that actually has T300 component heads in stock (i had no idea they had component heads until yesterday). They don't have the Tensei shafts in-stock, but have various steel shafts in stock. So I ordered a custom built set that they will build in-house from components they have in-house of T300 with Nippon 950gh stiff. Although I didn't get the graphite shafts I wanted, the Nippons are my favorite all time iron shaft and are in fact the steel shafts that I had been originally fit for a long time ago. I have always been seeking something in graphite that played similar to those, as those are my benchmark/ideal shaft. Since everything is in-stock at this club builder, my set will be done next week, even with all my special build requests. 

[dlow206]

Here is my build sheet for my order, which is on track for the end of this week from the local club builder

[dlow206]

Had my first round today with the T300 set. Front 9 was not so good with any club, so can't use that as a baseline. Made a grip change in the back 9 and started to play much better. Once my swing was generally in better shape, I love the ballflight of the T300. They launch really high, which may be bad for some of you guys, but for me, that is a good thing. Didn't have any sort of launch monitor, but my short irons had to be at least a 100 feet in the air. Also, these irons are more forgiving for me than the Srixon ZX5 set i had before. I hit one ball extremely off the toe with a 6 iron today, so much so that i called out "toe" after i hit the ball. Ball went lower than a good strike, but I was surprised how far it went for being that far off the toe. 

[Nolan220]

1 hour ago, dlow206 said:

Had my first round today with the T300 set. Front 9 was not so good with any club, so can't use that as a baseline. Made a grip change in the back 9 and started to play much better. Once my swing was generally in better shape, I love the ballflight of the T300. They launch really high, which may be bad for some of you guys, but for me, that is a good thing. Didn't have any sort of launch monitor, but my short irons had to be at least a 100 feet in the air. Also, these irons are more forgiving for me than the Srixon ZX5 set i had before. I hit one ball extremely off the toe with a 6 iron today, so much so that i called out "toe" after i hit the ball. Ball went lower than a good strike, but I was surprised how far it went for being that far off the toe. 

Had the same thing on miss hits lower ball flight but not to bad out of the target .. glad you like them

[dlow206]

One thing I noticed with my T300 set is that the set wedges are really good. I'm changing some stuff with my bag, so had a 48 (T300 wedge) and then a 60 degree TM wedge in the bag. (Normally I would have a 54 in there, and will soon). Didn't want to use the 60 more than needed, so when I was 60 to 70 yards out, hit partial 48 wedge shots and was putting those shots much closer to the hole than typical. 

[TMAG-FIREMEDIC]

Was intimidated by the address position initially of the T100 ........ but after trying P760 I came to realize that it's a progressive set in a great way! 4i is actually bigger than P760 4i but a much better look( thinner topline) to my eye .......

The confidence is growing with each passing round .......the 46* PW is truly a money club for me.......95-135yds wind dependent.......back to hitting 7i 170 albeit downwind!! Lol

With the added Tungsten in this iteration, forgiveness is really high especially in such a smallish package.  After nearly a year with the very solid i210s, I consider this a significant upgrade...... holed out a 6i from 170 in a Veterans event couple weeks back that I'm still riding high on that strike