Jump to content
TESTERS WANTED! ×

Shankster Gets Fitted: A Story


Recommended Posts

Driver:

 

The driver Has always been my love/hate club.  As a kid the Great Big Bertha was brand new, and half the size of our current selection.  I made the golf team in high school without having any woods in the bag, I used a PING Zing 1 iron… only to be cut 2 weeks later.

 

When I made my comeback to golf in 2013/14 Jason Day was on top of the world, so doing what a lot of consumers do, I went full Taylormade from top to bottom.  That driver was the R1, and I absolutely loved it. A few years into its tenure in my bag, the strap on the cart came loose while I was going up a hill and my bag fell off, which of course broke the shaft and severely dented the R1.

 

I believe right after that I was picked up for the i200 test. So me being a everything must match guy, I bought a PING G driver.  I absolutely smoked this thing.  I have no idea why I ever got rid of it. I didn’t replace it with anything for quite some time, I went 2/3’s of a season with just a 3 wood.  Then tried the Mini Bertha 1.5 before purchasing my PXG 0811.

 

The PXG has been an “ok” driver.  I’ve finally gotten used to it and can hit some bombs with it but the miss is huge, and punishing.  That’s all me. But I’m blaming it on Bob.

 

I have not been fitted for a driver ever, so hopefully I can see some gains in both the distance and dispersion departments.

 

As I mentioned, I am open to all brands except Callaway and PXG… unless of course I go Rogue…. But that is doubtful.

 

Right now I am averaging around 270-280 with some real bombs occasionally.

Link to comment
Share on other sites

Woods/Hybrids:

 

Another underused slot in my bag.  I use my 3 wood maybe once a round, and it usually is a mistake when I do.  The 2 hybrid has been my go to fairway finding and distance wise it’s 240+, so having the 3 wood which can be great but more than likely punishing in the bag doesn’t seem logical.

 

My pre fitting thoughts for this is possibly a 2 and 3 Mizuno CLK, at 14° and 18°, but we shall see what Mr. Fitter dude has to say.

 

Not trying to brag or anything but I’ve not run across a time when I needed to hit 3 wood into a green.  If I did have that shot I would probably lay up anyways to save a huge number.


Currently have a TM SLDR 3 wood, and TM Jetspeed 2 hybrid in play.  Stock shafts.

 

Never fitted for these either.

Link to comment
Share on other sites

Irons:

 

My bread and butter… I love hitting irons, always have.  There is nothing better than a flushed 3 iron. I’ve been through a few sets.  Had some old Wilson blades as a kid, some old PING’s, Pal Joey’s, Titleist DCI OS, Titleist 990, Taylormade RBZ Tours, PING i200 (thanks MGS), PING Blueprints (Huge thanks MGS), and currently gaming the T100s (traded the blueprints for them to another MGS member).

 

I have been “fitted” for these but it wasn’t the best. My game was not good either time. So I am curious to see if the T100s can be bettered.  They are some of the best irons I’ve ever used, and they look great.  Tall task ahead for whichever brand.

 

I refuse to hit anything other than a players type iron.  Huge bulky clubs scare the crap out of me.  

 

This section also includes the driving iron.  Can’t wait.

 

Again, no Callaway or PXG.

Link to comment
Share on other sites

Wedges:

 

A part of my game that I used to rely heavily on, in fact I used to miss greens on purpose so I could pull off a Seve-Esq shot.  Today, I am much smarter than that, and a really good putter, so the wedges have the mop up duty when I hit a poor iron shot, or one of those elusive lay ups.

 

I don’t find my way to the bunker very often, again this part of my game is fading because of lack of practice at it.  The new course I’ll be playing is riddled with bunkers, so I imagine this part of my game will be relied on again.

 

Wedges I have had in play.

 

Taylormade Tour Preferred,  Cobra KING, Bridgestone Tour B’s (thanks MGS), PING Glides, Vokey Sm6 54° & 58°, Vokey SM8 48°, a Cleveland Zip Core 48° (Thanks MGS). Oh and a Hi-Toe 56° TM wedge.  Maybe a few others

 

Out of all of these wedges, I probably liked the BStones the best.  They were so buttery, and really opened up my creative side for wedges.  I did like the shape of the TM TP’s the best though, with the Cobra’s in a close 2nd.  I must be an outlier, but I find Vokey’s to be oddly shaped, so while not out of the running for a spot in the bag, they will be down the list.

 

Really hoping the Mizuno T22 wins this spot, but I’m open to all brands except Callaway, Cleveland, and PXG here.  Cleveland because the are just too bulky for my taste.

Link to comment
Share on other sites

Good luck, and looking forward to the review! Where are you getting fitted? Any preview based on the back and forth in the build a bag thread on what you're hoping to end up being fit to? I saw you mention both the one-length forged tech and the JPX Tours. I feel really silly for not having looked into Cobra more seriously before my fitting. I'm not to the point where I can handle the Forged Tech but I did end up fitting into the LTDx irons. I fully expected to end up with Taylormade, Callaway or JPX and the Cobra's were far and away my favorite.

If I can be so bold, make sure you check out the Cobra LTDx and LTDx LS since you seem to be most open on the driver. I spent the weekend in a YouTube hole watching reviews of the LTDx line (as I await the arrival of my LTDx MAX) and the reviews of those with swing speeds in your neighborhood was overwhelmingly positive. Plus, as a righty you'd be able to pick from their limited edition alternate paint jobs if specific aesthetics are your thing. @chisag picked up the black edition over in the CHA thread and it looks clean.

Driver:     :cobra-small: LTDx Max 10.5°, MCG C6 Red 50 R

Wood:     :cobra-small: LTDx Max 3W 15.5°, MCG C6 Red 50 R

Hybrid:     :titleist-small: TS2 4H 23°; 5H 25°, Mitsubishi Kuro Kage Black 60 Graphite Regular

Irons:       :cobra-small: LTD (5-9); :Fuji: Vista PRO 60i R

Wedges:  :taylormade-small: Milled Grind 3 - 54.11 (56°), :taylormade-small: Milled Grind 3 - 60.10; :Fuji: Vista PRO 60i R

Putter:      :odyssey-small: White Hot Pro 1 / :odyssey-small: 2-Ball Ten Armlock

Bag:         :taylormade-small: Supreme Cart Bag 2022

Balls:      :maxfli: Tour

Reviews: Spornia SPG8 XL Net (Official), Me and My Golf Full Body Freedom (Unofficial), Club Champion Full Bag Fitting (Unofficial), Gravity Caddy (Unofficial)

Link to comment
Share on other sites

3 hours ago, mynerds said:

Good luck, and looking forward to the review! Where are you getting fitted? Any preview based on the back and forth in the build a bag thread on what you're hoping to end up being fit to? I saw you mention both the one-length forged tech and the JPX Tours. I feel really silly for not having looked into Cobra more seriously before my fitting. I'm not to the point where I can handle the Forged Tech but I did end up fitting into the LTDx irons. I fully expected to end up with Taylormade, Callaway or JPX and the Cobra's were far and away my favorite.

If I can be so bold, make sure you check out the Cobra LTDx and LTDx LS since you seem to be most open on the driver. I spent the weekend in a YouTube hole watching reviews of the LTDx line (as I await the arrival of my LTDx MAX) and the reviews of those with swing speeds in your neighborhood was overwhelmingly positive. Plus, as a righty you'd be able to pick from their limited edition alternate paint jobs if specific aesthetics are your thing. @chisag picked up the black edition over in the CHA thread and it looks clean.

I am going to Knighthawk golf center, they have all of the brands except Wilson I believe.

Link to comment
Share on other sites

2 minutes ago, Shankster said:

Updated the back story on all of those sections.  I will add the dat in the main post when I get it.  

No putter upgrade?????   That’s disappointing and I’m out with no putter change 😂.   Actually can’t wait to hear about you experience; always educational reading about everyone’s fittings as it help you better understand the process and increase the odds that you get a good fit.  

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15*  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/:Accra iWedge 90 Graphite
Putter:   :taylormade-small:TM-180

Testing:   SPGC_logo.jpg

Backups:  :odyssey-small: Milled Collection RSX 2, :seemore-small: mFGP2, :cameron-small: Futura 5W

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

3 hours ago, mynerds said:

Good luck, and looking forward to the review! Where are you getting fitted? Any preview based on the back and forth in the build a bag thread on what you're hoping to end up being fit to? I saw you mention both the one-length forged tech and the JPX Tours. I feel really silly for not having looked into Cobra more seriously before my fitting. I'm not to the point where I can handle the Forged Tech but I did end up fitting into the LTDx irons. I fully expected to end up with Taylormade, Callaway or JPX and the Cobra's were far and away my favorite.

If I can be so bold, make sure you check out the Cobra LTDx and LTDx LS since you seem to be most open on the driver. I spent the weekend in a YouTube hole watching reviews of the LTDx line (as I await the arrival of my LTDx MAX) and the reviews of those with swing speeds in your neighborhood was overwhelmingly positive. Plus, as a righty you'd be able to pick from their limited edition alternate paint jobs if specific aesthetics are your thing. @chisag picked up the black edition over in the CHA thread and it looks clean.

Also, I have always liked Cobra’s drivers.  So they will be on the list for sure.  I am fairly open on all of the clubs, but I can’t do GI irons.  So irons wise I’m looking at:

Titleist: T100, T100s, CB, MB

Taylormade: CB, MB, and maybe the 770…

PING: i59

Cobra: CB, Tour, MB, maybe 1 length but they might be too chunky…

Mizuno: JPX Tour, 221, and maybe 223

Callaway: IF they have the TCB I will try them, but I don’t know… something about this brand is a major turn off for me.

1 minute ago, cnosil said:

No putter upgrade?????   That’s disappointing and I’m out with no putter change 😂.   Actually can’t wait to hear about you experience; always educational reading about everyone’s fittings as it help you better understand the process and increase the odds that you get a good fit.  

The Anser and the B.2 are in a heated battle at the moment.

Link to comment
Share on other sites

18 minutes ago, Shankster said:

 

The Anser and the B.2 are in a heated battle at the moment.

Forgot you were doing the LAB test.   

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15*  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/:Accra iWedge 90 Graphite
Putter:   :taylormade-small:TM-180

Testing:   SPGC_logo.jpg

Backups:  :odyssey-small: Milled Collection RSX 2, :seemore-small: mFGP2, :cameron-small: Futura 5W

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

Just now, cnosil said:

Forgot you were doing the LAB test.   

If I have time, I may check out putters.  But it is the lowest on my priority list.

I don’t know what is going to happen.  Can a fitting really improve on what I am currently seeing?  I hope so, because if I can dial my clubs in even further…. It will be a really fun game.

Link to comment
Share on other sites

I guess I missed it, but why not Callaway ?

I would expect the Rogue to be in the top 3. My Mavrik is the bees knees

looking forward to seeing what all works best for you, have fun!

 

:titleist-small: TSr2 on tensi blue stiff

:cobra-small: Speedzone 3-wood on Tensi blue S

:callaway-logo-1: Epic Max 5 and 7 woods on HZRDUS  Reg flex

:callaway-logo-1: Paradym 9 wood on HZRDUS reg flex

:taylormade-small: P770 / P790 combo set on Ventus R-6 shafts 6-AW

:mizuno-small:  T22 Denim Copper 54°, 58° on Kinetic X Trajectory 

:EVNROLL: ER3 or,

:edel-golf-1: E.A.S. #4   (“Fang” or “Adele”)
 

:titelist-small: ProV1x, or, Maxfli Tour X

:callaway-small: .Org 14 cart bag

Adidas Tour 360 , or Sketcher shoes

 

 

Link to comment
Share on other sites

1 minute ago, Sluggo42 said:

I guess I missed it, but why not Callaway ?

I would expect the Rogue to be in the top 3. My Mavrik is the bees knees

looking forward to seeing what all works best for you, have fun!

Haha.  You asked… you’ll get my honest answer.

When I worked at the golf course as a kid, all of the giant A-Holes had Callaway clubs. Put a bad taste in my mouth back then, and I’ve carried that sentiment with me ever since.

Link to comment
Share on other sites

😂 Now that’s what they call ”holding a grudge” to the extreme. So then the Rogue will really have to stand out for a true consideration…

 

:titleist-small: TSr2 on tensi blue stiff

:cobra-small: Speedzone 3-wood on Tensi blue S

:callaway-logo-1: Epic Max 5 and 7 woods on HZRDUS  Reg flex

:callaway-logo-1: Paradym 9 wood on HZRDUS reg flex

:taylormade-small: P770 / P790 combo set on Ventus R-6 shafts 6-AW

:mizuno-small:  T22 Denim Copper 54°, 58° on Kinetic X Trajectory 

:EVNROLL: ER3 or,

:edel-golf-1: E.A.S. #4   (“Fang” or “Adele”)
 

:titelist-small: ProV1x, or, Maxfli Tour X

:callaway-small: .Org 14 cart bag

Adidas Tour 360 , or Sketcher shoes

 

 

Link to comment
Share on other sites

Just now, Sluggo42 said:

😂 Now that’s what they call ”holding a grudge” to the extreme. So then the Rogue will really have to stand out for a true consideration…

I have tried Callaway clubs a few times.  They make a great product.  We’ll see, it is unlikely, but anything is possible I suppose. I mean if the Rogue is going 10-15 yards longer and straighter… I might let the grudge go just this once.  But I’m getting rid of the head cover immediately.

Link to comment
Share on other sites

I have only one regret from my last fitting.  I was worried I had been losing yards to aging.  I made the mistake of saying that to my fitter.  I didn't notice at the time but all the clubs he gave me during the fitting were stronger lofted.  I love the feel of hitting my PXG irons and they are longer than my previous KZG irons.  The issue is I have lost my stopping spin.  The ball rolls out on all my new irons.   It takes to many options off the table for me.  I can club up for the yardages or move up a tee box.  I can't replicate the control of the ball I had.  This week I pulled out my KZG irons and put them back in my bag.  The results were very telling.  I could attack pins again because the ball just hopped and stopped or spun back a yard or two.  I love the feel of the PXG irons but the roll out takes to many shots into the green out of my bag.  It is hard to notice on the launch monitor that the ball is rolling out 10-15 feet.   I was planning for this purchase to carry me for the next 10 years.  I need the less stiff shaft in the PXG irons but I want to go back to my 4 degree gaps and standard lofts at least up to 7 iron.

Driver: Titleist TSR 3 10* Accura TZ6 M3 65g

Fairways: Callaway Rogue 15* & 19* Matrix Ozik TP 6 HD stiff 

Hybrid: Titleist TSI 4 & 5 Hybrids Mitsubishi Tensi AV 65 HY X stiff   

Irons:  KZG Forged III 6-P Accura iS7 (Refinished and regrooved)

Wedges: Cleveland CBX  50*, Taylormade MG 3 Tiger grind 56 bent to 54/10 & Taylormade MG 4 Tiger grind 56 bent to 58/14

Putter: Positive Putter's Custom P2 (think Edel putter meets Heavy Putter)

Ball: Callaway Chome Tour                        

All clubs have Winn Dri-Tac Wraps oversized

 

 

Link to comment
Share on other sites

7 hours ago, D Mackey said:

I have only one regret from my last fitting.  I was worried I had been losing yards to aging.  I made the mistake of saying that to my fitter.  I didn't notice at the time but all the clubs he gave me during the fitting were stronger lofted.  I love the feel of hitting my PXG irons and they are longer than my previous KZG irons.  The issue is I have lost my stopping spin.  The ball rolls out on all my new irons.   It takes to many options off the table for me.  I can club up for the yardages or move up a tee box.  I can't replicate the control of the ball I had.  This week I pulled out my KZG irons and put them back in my bag.  The results were very telling.  I could attack pins again because the ball just hopped and stopped or spun back a yard or two.  I love the feel of the PXG irons but the roll out takes to many shots into the green out of my bag.  It is hard to notice on the launch monitor that the ball is rolling out 10-15 feet.   I was planning for this purchase to carry me for the next 10 years.  I need the less stiff shaft in the PXG irons but I want to go back to my 4 degree gaps and standard lofts at least up to 7 iron.

Heard that.

Im telling the dude I want the smallest club that won’t completely destroy a round of I am having an off day.  They will be coming in from Elonville (space) no matter the club, so it is going to come down to consistency and my personal preference.

 

Aftter looking at those Rickie Fowler clubs everything else looks disgusting.  Even the Titleist blade has too much offset.  I hate the look of offset.  Hate it.
 

I have an ancient Kroyden 2 iron that I practice with. It says offset, but it is nothing I can see. The RF blades remind me of it, just gorgeous.  

Link to comment
Share on other sites

19 hours ago, Shankster said:

Callaway: IF they have the TCB I will try them, but I don’t know… something about this brand is a major turn off for me.

is it the way the brand does its marketing that you dislike? or is it just incompatibility performance-wise? same way I can't work with PING stuff...
EDIT: nevermind, just read your response to the question... I also used to know a guy who played a whole PING bag and I hated his guts as well...

:cobra-small: SpeedZone 9* w/ Aldila Rogue Silver 60 S
:callaway-small: X2 Hot 3 Deep 14.5* w/ Aldila Tour Green 75 S
:taylormade-small: JetSpeed 5W 19* w/ Matrix Velox T 69 S OR :adams-small: Super LS 3H 19* w/ Kuro Kage Black 80 S
:mizuno-small: JPX919 Forged 4-PW w/ Modus3 105 S
:titelist-small: Vokey SM7 50/08F, 54/14F & 58/08M w/ Modus3 115 Wedge
:EVNROLL: ER1 34" w/ SuperStroke Fatso 2.0
MfleKCg.jpg Pro / 9dZCgaF.jpgH2NO Lite Cart Bag / :Clicgear: 3.0 / :918457628_PrecisionPro: NX7 Pro LRF

My reviews: MLA Putter // Titleist SM7 // PING i500 // PuttOUT

Link to comment
Share on other sites

On 6/20/2022 at 12:56 PM, Shankster said:

Also, I have always liked Cobra’s drivers.  So they will be on the list for sure.  I am fairly open on all of the clubs, but I can’t do GI irons.  So irons wise I’m looking at:

Titleist: T100, T100s, CB, MB

Taylormade: CB, MB, and maybe the 770…

PING: i59

Cobra: CB, Tour, MB, maybe 1 length but they might be too chunky…

Mizuno: JPX Tour, 221, and maybe 223

Callaway: IF they have the TCB I will try them, but I don’t know… something about this brand is a major turn off for me.

The Anser and the B.2 are in a heated battle at the moment.

We have close to the same handi-cap and I am certain you will find some excellent irons that fit your eye. I have 2 sets of irons due to being a Golf HO.

1. I have the 2021 Titleist T100s 7 - PW & T200 4 - 6 iron. The T100s are small has you have stated you like and very little offset.

2. I just purchased the 2022 Cobra King Forged Tec Irons 4 - PW with graphite shafts due to some pain I was having in my joints. They are excellent clubs too, but have more offset and the heads are a little larger than the Titleist.

As you stated, the shafts are one of the most important factors.

Good Luck on your fitting!

Driver: :titelist-small: TSI3 - 10*, Hzrdus Smoke 6.0 Stiff

Driver: :taylormade-small: Stealth Plus - 10.5*, Oban Kiyoshi Purple O4Flex-65 Grams Purred
3 Wood: :taylormade-small: SIM - 15*, Graphite Design Tour AD DJ5 Stiff
Hybrid: :titelist-small: TS3 - 19*, Hzrdus Smoke 6.0 Stiff
Irons: :titelist-small:  5 - PW T150, with Nippon Zelos 7 Reg, 4 iron - U505 with Project X HZRDUS Black Stiff

Wedges: :titelist-small: Vokey SM 8 - 50*, 60* Standard Wedge Shafts

Wedge: :taylormade-small: Milled Grind 3 MG3 56* S200 shaft

Putter:  :scotty-cameron-1: Studio Select Newport 1.5        
Putter:  :scotty-cameron-1: Phantom X 5.5
Ball: :titelist-small: Pro V1x

 

Link to comment
Share on other sites

35 minutes ago, GaDawg said:

We have close to the same handi-cap and I am certain you will find some excellent irons that fit your eye. I have 2 sets of irons due to being a Golf HO.

1. I have the 2021 Titleist T100s 7 - PW & T200 4 - 6 iron. The T100s are small has you have stated you like and very little offset.

2. I just purchased the 2022 Cobra King Forged Tec Irons 4 - PW with graphite shafts due to some pain I was having in my joints. They are excellent clubs too, but have more offset and the heads are a little larger than the Titleist.

As you stated, the shafts are one of the most important factors.

Good Luck on your fitting!

I might do something stupid and just get a set of the RF irons.  I can’t stop looking at them.

Link to comment
Share on other sites

Alan, just thought I'd mention that the the Rev 33 aka Proto irons are built to certain specs, you can get fit for the RF Forged MB with a ton of different shaft options, the only difference being they aren't CNC milled like the Rev 33s.

In a :ping-small: Hoofer Lite bag

 :titleist-small: TSR2, 10 degrees, A1 setting, Fujikara Speeder NX Blue 50-S

:taylormade-small: Stealth, 15 degrees, VA Composites Nemesys 70-S 

:755178188_TourEdge: E722, 19 degrees, Oban Devotion 80-S

:mizuno-small: JPX 921 Hot Metal Pro 4-P, Nippon 950GH Stiff Flex

 :cleveland-small: CBX Zipcore 50* (bent to *49) and RTX Zipcore Tour Rack 54* (bent to *55), DG 115 Spinner, Tour Issue

:wilson-small: Staff Model TG 60*, Dynamic Gold 120 S300

 SIK Golf Flo-C

:bridgestone-small: Tour B-XS (2022 Model)

Link to comment
Share on other sites

1 hour ago, Berg Ryman said:

Alan, just thought I'd mention that the the Rev 33 aka Proto irons are built to certain specs, you can get fit for the RF Forged MB with a ton of different shaft options, the only difference being they aren't CNC milled like the Rev 33s.

Oh yes my man.  I’ve researched this to the end of the internet, nearly.

Link to comment
Share on other sites

I'm also one who has a strong dislike of offset and big bulky irons. It's why I went with the 0311T irons of the PXG range.

I'd rather play a hybrid than a bulky offsetted longer iron, which is why I only went to a 5 iron with my new bag.

Obviously you won't be going with PXG, but lots of great players club options out there and any decent fitter will be able to get you into a set that meets your eye. Will be interesting to see what you end up with.

DRIVER PXG 0811XF GEN4 (10.5°)

FAIRWAY WOODS PXG 0341XF GEN4 (16°)

HYBRIDS PXG 0317XF GEN4 (19°), PXG 0317X GEN4 (22°)

IRONS PXG 0311T GEN3 (5 - 9)

WEDGES TAYLORMADE MG3 (45°, 50°, 55° TW Grind, 60° TW Grind)

PUTTER PXG BATTLE READY ONE & DONE

Link to comment
Share on other sites

3 hours ago, Shankster said:

I might do something stupid and just get a set of the RF irons.  I can’t stop looking at them.

You do realize that even Ricky can’t hit those, right?

 

:titleist-small: TSr2 on tensi blue stiff

:cobra-small: Speedzone 3-wood on Tensi blue S

:callaway-logo-1: Epic Max 5 and 7 woods on HZRDUS  Reg flex

:callaway-logo-1: Paradym 9 wood on HZRDUS reg flex

:taylormade-small: P770 / P790 combo set on Ventus R-6 shafts 6-AW

:mizuno-small:  T22 Denim Copper 54°, 58° on Kinetic X Trajectory 

:EVNROLL: ER3 or,

:edel-golf-1: E.A.S. #4   (“Fang” or “Adele”)
 

:titelist-small: ProV1x, or, Maxfli Tour X

:callaway-small: .Org 14 cart bag

Adidas Tour 360 , or Sketcher shoes

 

 

Link to comment
Share on other sites

Btw, I’m digging the 770’s more and more. Might be partly the Ventus red shafts too, not sure. I think the shafts get me more spin, so it’s enough. The extra 10 yds drops a club from the Hogan Icon blades, so the spin almost equals out. As always, everything depends on how well ya strike it.

 

:titleist-small: TSr2 on tensi blue stiff

:cobra-small: Speedzone 3-wood on Tensi blue S

:callaway-logo-1: Epic Max 5 and 7 woods on HZRDUS  Reg flex

:callaway-logo-1: Paradym 9 wood on HZRDUS reg flex

:taylormade-small: P770 / P790 combo set on Ventus R-6 shafts 6-AW

:mizuno-small:  T22 Denim Copper 54°, 58° on Kinetic X Trajectory 

:EVNROLL: ER3 or,

:edel-golf-1: E.A.S. #4   (“Fang” or “Adele”)
 

:titelist-small: ProV1x, or, Maxfli Tour X

:callaway-small: .Org 14 cart bag

Adidas Tour 360 , or Sketcher shoes

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...