Jump to content

2023 Evnroll V Series Putter Lineup


GolfSpy_APH

Recommended Posts

image.png

Evnroll has a whole lot of putters in this line up! 15 to be exact. Definitely a lot that in my wheelhouse as far as looks and seeing as I have never owned a Evnroll putter before this may just be the time. 

You can read the full article here: https://mygolfspy.com/2023-evnroll-v-series-putter-line/

As well we will have a Gratuitous Photo Thread up before too long as well!

What are your favourites and what would be your short list picks? 

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

Mention it and it appears haha. The 5.1 and 12 have my attention for sure.  As I mentioned in the “What equipment are you thinking about” thread, I would have preferred a mini 11vx due to my own weirdness with holes in putters but if it performs I’ll give it a chance.  
 

My dream putter would be a milled 1 piece “spider X/ER11vx” with the SIK DLT face. 

 

 

 

What is in my Sun Mountain C-130 bag

Driver:    :ping-small: G430 LST 9*(set at big minus) with a BGT Brava X shaft @ 45.25”

Fairway: :srixon-small: F85 3 wood with a XPhplexx Agera X @ 42.5”

 :srixon-small: F85 5 wood with a UST Elements Chrome 7F5 @ 41.5"

Driving Iron: :ping-small: Rapture 2-Iron 

Irons: :srixon-small: ZX5 4-PW with Modus 105S 

Wedge: :cleveland-small: Zipcore 50* bent to 48*

Putter:  SIK Jo slant neck @ 33”   

Link to comment
Share on other sites

Just now, blackngold_blood said:

Mention it and it appears haha. The 5.1 and 12 have my attention for sure.  As I mentioned in the “What equipment are you thinking about” thread, I would have preferred a mini 11vx due to my own weirdness with holes in putters but if it performs I’ll give it a chance.  
 

My dream putter would be a milled 1 piece “spider X/ER11vx” with the SIK DLT face. 

Had I not been putting the baby to sleep I would have had it up before you had posted haha

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

1 minute ago, GolfSpy_APH said:

Had I not been putting the baby to sleep I would have had it up before you had posted haha

Well sir, I’d say you prioritized the right thing. 

 

 

 

What is in my Sun Mountain C-130 bag

Driver:    :ping-small: G430 LST 9*(set at big minus) with a BGT Brava X shaft @ 45.25”

Fairway: :srixon-small: F85 3 wood with a XPhplexx Agera X @ 42.5”

 :srixon-small: F85 5 wood with a UST Elements Chrome 7F5 @ 41.5"

Driving Iron: :ping-small: Rapture 2-Iron 

Irons: :srixon-small: ZX5 4-PW with Modus 105S 

Wedge: :cleveland-small: Zipcore 50* bent to 48*

Putter:  SIK Jo slant neck @ 33”   

Link to comment
Share on other sites

6 hours ago, GolfSpy_APH said:

image.png

Evnroll has a whole lot of putters in this line up! 15 to be exact. Definitely a lot that in my wheelhouse as far as looks and seeing as I have never owned a Evnroll putter before this may just be the time. 

You can read the full article here: https://mygolfspy.com/2023-evnroll-v-series-putter-line/

As well we will have a Gratuitous Photo Thread up before too long as well!

What are your favourites and what would be your short list picks? 

 I really liked the ER2 and can't wait to roll one in the coming weeks.  

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15*  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/:Accra iWedge 90 Graphite
Putter:   :taylormade-small:TM-180

Testing:   SPGC_logo.jpg

Backups:  :odyssey-small: Milled Collection RSX 2, :seemore-small: mFGP2, :cameron-small: Futura 5W

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

Oh man- I have a new ER2v in black. Love it. But I really like the look of the 5.1 in silver and black… and I REALLY like the changeable weights. This is not good. 😜

Driver: Callaway Paradym; Hzrdus Silver 50 Gram

3 Wood: Ping 410; "Otto Phlex" Project X Evenflow Riptide 

7 Wood: Callaway Epic Max 

3, 5-7 Irons: Callaway Apex 19

8-AW Irons: Callaway Apex Pro 19

Wedges: Callaway MD4 54, Callaway MD4 58 X Grind 

Putter: Evnroll ER2v; Midlock and Standard 34 inch with Gravity Gip

Link to comment
Share on other sites

Dang…..love my ER2…..but that 12 is hollering at me

Check out my reviews:

:ping-small:  G710 Irons Official Review I :Fuji: MC Shaft & :EVNROLL: V Series Putter Official Review

:cobra-small: 2022 Forged Tec's Official Review I Logo.png.7f297574516267afc6959b36be364cf9.pngNitron Push Cart Official Review

WITB:

Weapons of grass destruction (link to WITB)

:ping-small: Traverse is filled with all this shiny metal and tracked by :Arccos:

:cobra-small: RadSpeed 8* - MotoreX F1 6X :taylormade-small: SIM 3W - Project X HZRDUS Green

:titleist-small: U505 Driving Iron 17* - Project X HZRDUS Black :cobra-small: SpeedZone 4H - Project X HZRDUS Black

:cobra-small: 2022 King Forged Tec's 4-PW - KBS $ Tape 130 :titelist-small: 48 (SM8), 52 & 60 (SM7) - Nippon Modus 125 S 

:EVNROLL: ER2VI :titelist-small: PROV1X #19 

Are you a veteran? Check out the Veterans Golf Association (VGA) Thread!

Link to comment
Share on other sites

I'm still gaming and having good results with my ER5v.  I did see this announcement today and noted that not only have the folks at Evnroll been busy  but that changeable weights are in every product offered.  That level of adjustability sure makes sense - particularly in todays world of computer aided putter fitting.  Lots of mallet designs in the line-up; that says something to me as well.

:ping-small: G410 Plus, 9 Degree Driver 

:ping-small: G400 SFT, 16 Degree 3w

:ping-small: G400 SFT, 19 Degree 5w

:srixon-small:  ZX5 Irons 4-AW 

:ping-small: Glide 2.0 56 Degree SW   (removed from double secret probation 😍)

:EVNROLL: ER5v Putter  (Evnroll ER5v Official Review)

:odyssey-small: AI-One Milled Seven T CH (Currently Under Product Test)

 

 

 

Link to comment
Share on other sites

EV5.1 black and satin, or ERZ.1, but I’d need a fitting because I’m not sure either one would work for me based-on Edel and Ping fittings I’ve done. The only “Anser-style” has the wide flange with the rear line and I don’t like that. I actually would want something with zero lines on it, or one just on the top of the leading edge, so EV5.1 would be choice 1.

Driver: Ping G430 Max 9*, Ping Tour 70X

Fairway: Ping G425 15*, Ping Tour 70X

Hybrid: Ping G425 22*, Ping Tour 80X

Irons:  Ping i230 4-GW, TT DG X100

Wedges: :edel-golf-1: SMS 50D/54V/58D:Nippon:Modus 130 stiff, +1”

Putter:  :edel-golf-1: EAS 1.0

Ball: Titleist 2023 AVX

Link to comment
Share on other sites

34 minutes ago, PMookie said:

EV5.1 black and satin, or ERZ.1, but I’d need a fitting because I’m not sure either one would work for me based-on Edel and Ping fittings I’ve done. The only “Anser-style” has the wide flange with the rear line and I don’t like that. I actually would want something with zero lines on it, or one just on the top of the leading edge, so EV5.1 would be choice 1.

Funny you mention target lines and preferences.  While doing my review on the ER5v, I added a Sharpie marker toe and heel side top line to the stock, middle line in attempt to test out the mfg. claim about the face design (even rollout on off-center strikes).  I never wiped them off and now kind of use them to help frame/position the ball on the centerline.  I wonder what Guerin would say about this? 😆

:ping-small: G410 Plus, 9 Degree Driver 

:ping-small: G400 SFT, 16 Degree 3w

:ping-small: G400 SFT, 19 Degree 5w

:srixon-small:  ZX5 Irons 4-AW 

:ping-small: Glide 2.0 56 Degree SW   (removed from double secret probation 😍)

:EVNROLL: ER5v Putter  (Evnroll ER5v Official Review)

:odyssey-small: AI-One Milled Seven T CH (Currently Under Product Test)

 

 

 

Link to comment
Share on other sites

These look like some great new options. Man those new 5 models have my interest. I think the 5.1 looks best to me, but I’d love to see them all in the metal to decide. 

:callaway-small: Epic Max LS 10.5 - Motore X F3 6X | :cobra-small: Speedzone 5-wood - Ventus Blue 8S | :titelist-small: TSi3 20* Hybrid - KBS Proto 85S

:edel-golf-1: SMS Pro 4-PW - Steelfiber i110S | :taylormade-small: MG3 Raw Black 50.09, 54.11, 58.11 - DG TI S200

:EVNROLL: ER2B | :titelist-small: Pro V1x | :918457628_PrecisionPro: NX9 Slope | Jones Trouper R | :CaddyTek: CaddyLite EZ v8

 

Link to comment
Share on other sites

Nice looking options and the face groves are intriguing. I really like the 2 in black. Would like to feel them also.

4-PW and UW Ping G710

Ping Glide 54 degree wedge

1,3,5 Taylor-Made Titanium bubble shafts (24years)

Top-Flite Gamer Putter

 

Link to comment
Share on other sites

Oh man- I have a new ER2v in black. Love it. But I really like the look of the 5.1 in silver and black… and I REALLY like the changeable weights. This is not good. 😜

Driver: Callaway Paradym; Hzrdus Silver 50 Gram

3 Wood: Ping 410; "Otto Phlex" Project X Evenflow Riptide 

7 Wood: Callaway Epic Max 

3, 5-7 Irons: Callaway Apex 19

8-AW Irons: Callaway Apex Pro 19

Wedges: Callaway MD4 54, Callaway MD4 58 X Grind 

Putter: Evnroll ER2v; Midlock and Standard 34 inch with Gravity Gip

Link to comment
Share on other sites

So with the changeable weights in the 5’s, can the weights be re-configured to make the head face balanced? If so, does that reduce the significance of the interchangeable hosels? 

Driver: Callaway Paradym; Hzrdus Silver 50 Gram

3 Wood: Ping 410; "Otto Phlex" Project X Evenflow Riptide 

7 Wood: Callaway Epic Max 

3, 5-7 Irons: Callaway Apex 19

8-AW Irons: Callaway Apex Pro 19

Wedges: Callaway MD4 54, Callaway MD4 58 X Grind 

Putter: Evnroll ER2v; Midlock and Standard 34 inch with Gravity Gip

Link to comment
Share on other sites

1 hour ago, DukeStKing said:

So with the changeable weights in the 5’s, can the weights be re-configured to make the head face balanced? If so, does that reduce the significance of the interchangeable hosels? 

Technically with enough weight you probably could, but I think that much weight would throw off the feel/flow of the putter.  The best way to control toe hang is by controlling the shaft intersection point,  

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15*  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/:Accra iWedge 90 Graphite
Putter:   :taylormade-small:TM-180

Testing:   SPGC_logo.jpg

Backups:  :odyssey-small: Milled Collection RSX 2, :seemore-small: mFGP2, :cameron-small: Futura 5W

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

3 minutes ago, cnosil said:

Technically with enough weight you probably could, but I think that much weight would throw off the feel/flow of the putter.  The best way to control toe hang is by controlling the shaft intersection point,  

Another thing I’m wondering about is how much a MOI benefit there may be in the new 5’s weights in comparison to my ER2v? How much sense does it make to upgrade from the ER2v to the 2023 models because of the weights? In my head, I’m always wondering if a slight upgrade in tech is worth it. 

Driver: Callaway Paradym; Hzrdus Silver 50 Gram

3 Wood: Ping 410; "Otto Phlex" Project X Evenflow Riptide 

7 Wood: Callaway Epic Max 

3, 5-7 Irons: Callaway Apex 19

8-AW Irons: Callaway Apex Pro 19

Wedges: Callaway MD4 54, Callaway MD4 58 X Grind 

Putter: Evnroll ER2v; Midlock and Standard 34 inch with Gravity Gip

Link to comment
Share on other sites

11 minutes ago, DukeStKing said:

Another thing I’m wondering about is how much a MOI benefit there may be in the new 5’s weights in comparison to my ER2v? How much sense does it make to upgrade from the ER2v to the 2023 models because of the weights? In my head, I’m always wondering if a slight upgrade in tech is worth it. 

I personally wouldn’t thing there is much change;  I personally believe it is more of a fitting tool to help manage head weight.  

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15*  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/:Accra iWedge 90 Graphite
Putter:   :taylormade-small:TM-180

Testing:   SPGC_logo.jpg

Backups:  :odyssey-small: Milled Collection RSX 2, :seemore-small: mFGP2, :cameron-small: Futura 5W

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

I’m guessing you could get increase/decrease the toe hang slightly by making the tie lighter/heavier. Not go from toe hang to face balance but maybe add/subtract a few degrees if needed.  Big fan of the in-line slant vs the normal slant neck. 

 

 

 

What is in my Sun Mountain C-130 bag

Driver:    :ping-small: G430 LST 9*(set at big minus) with a BGT Brava X shaft @ 45.25”

Fairway: :srixon-small: F85 3 wood with a XPhplexx Agera X @ 42.5”

 :srixon-small: F85 5 wood with a UST Elements Chrome 7F5 @ 41.5"

Driving Iron: :ping-small: Rapture 2-Iron 

Irons: :srixon-small: ZX5 4-PW with Modus 105S 

Wedge: :cleveland-small: Zipcore 50* bent to 48*

Putter:  SIK Jo slant neck @ 33”   

Link to comment
Share on other sites

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. My ER5B has 278 rounds on it. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag. I am about as anal about caring for my clubs as anyone you'd ever meet, I use iron covers on every other iron. Other guys I play with ask me if my clubs are new, my Mizuno's are 5 years old and my W/S RM Midsize irons were 20 years old when I sold them - still pristine.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the satin v black fence?

[If Evnroll has substantially changed their black process, by all means correct me.]

IMG_2912 2.JPG

IMG_2910.JPG

  • Titleist TSR2 11° HZRDUS Red CB 50 6.0 w Lamkin UTx Midsize
  • Titleist TSR2 16.5º HZRDUS Red 60 CB 6.0 & TSR2 21º HZRDUS Black 4G 70 6.0 w Lamkin UTx Midsize
  • Mizuno JPX923 HMP 4-GW, T22 54.12WS, T22 58.04DC w Lamkin ST+2 Hybrid Midsize
  • Evnroll EV5.3
  • Maxfli Tour & ProV1
  • Ping Pioneer - MGI Zip Navigator AT
  • Payntr X 002 LE, Ecco Biom C4, FJ DryJoys
Link to comment
Share on other sites

1 minute ago, Middler said:

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the fence?

IMG_2912 2.JPG

IMG_2910.JPG

Dang - that IS a lot. My only question would be looking at address, though, is there wear/tear?  I don't (ultimately) mind it on the bottom, but it might distract me if it's also got some that's visible at address.  Those shaft rubbings seem crazy to me - that's such a bummer. 

Driver - PXG 0811 XF - Gen 5, 9 degrees (+1 setting), Oban Devotion TR 65 04
3/5 Wood - Warrior Golf (don't ask)
Utility - Caley X01 Driving Iron (3 = 18*)
Irons (4-PW) - Caley 01T (4-PW)
Wedges (48, 52, 56, 60) - Indi Wedges FLX 48 / ATK 52, 56, 60
Putter - L.A.B. Directed Force 2.1 - 65*
Ball - Maxfli Tour

Link to comment
Share on other sites

9 minutes ago, Samsonite said:

Dang - that IS a lot. My only question would be looking at address, though, is there wear/tear?  I don't (ultimately) mind it on the bottom, but it might distract me if it's also got some that's visible at address.  Those shaft rubbings seem crazy to me - that's such a bummer. 

No, it looks like new from the top at address. I assume the wear is just from grazing the grass on greens and/or the head cover which rests on the sole when it's in the bag? The latter might sound crazy, but the wear is most prominent at the leading and trailing edge, I can see bare metal at both - and that's a putter that's been babied all along.

  • Titleist TSR2 11° HZRDUS Red CB 50 6.0 w Lamkin UTx Midsize
  • Titleist TSR2 16.5º HZRDUS Red 60 CB 6.0 & TSR2 21º HZRDUS Black 4G 70 6.0 w Lamkin UTx Midsize
  • Mizuno JPX923 HMP 4-GW, T22 54.12WS, T22 58.04DC w Lamkin ST+2 Hybrid Midsize
  • Evnroll EV5.3
  • Maxfli Tour & ProV1
  • Ping Pioneer - MGI Zip Navigator AT
  • Payntr X 002 LE, Ecco Biom C4, FJ DryJoys
Link to comment
Share on other sites

53 minutes ago, cnosil said:

I personally wouldn’t thing there is much change;  I personally believe it is more of a fitting tool to help manage head weight.  

True- for the 2’s. I wouldn’t “upgrade” my ER2v for the new 2’s. I’m thinking of switching to the 5.1. I would think the additional weights in the 5’s will make a big MOI difference- especially since the weights go all the way down the wings. 

53 minutes ago, cnosil said:

 

Edited by DukeStKing

Driver: Callaway Paradym; Hzrdus Silver 50 Gram

3 Wood: Ping 410; "Otto Phlex" Project X Evenflow Riptide 

7 Wood: Callaway Epic Max 

3, 5-7 Irons: Callaway Apex 19

8-AW Irons: Callaway Apex Pro 19

Wedges: Callaway MD4 54, Callaway MD4 58 X Grind 

Putter: Evnroll ER2v; Midlock and Standard 34 inch with Gravity Gip

Link to comment
Share on other sites

1 minute ago, DukeStKing said:

True- for the 2’s. I wouldn’t “upgrade” my ER2v for the new 2’s. I’m thinking of switching to the 5.1. I would think the additional weights in the 5’s will make a big MOI difference- especially since the weights go all the way down the wings. 

That is a different putter design than the 2 by nature of the club design it will have higher MOi.  But I still think adding more weight to the 5.1 is just a weight fitting thing and wouldn’t significantly change the MOI.   I’ll try to remember to ask today if Evnroll will be offering weight kits or if it is something that will need to be custom. 

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15*  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/:Accra iWedge 90 Graphite
Putter:   :taylormade-small:TM-180

Testing:   SPGC_logo.jpg

Backups:  :odyssey-small: Milled Collection RSX 2, :seemore-small: mFGP2, :cameron-small: Futura 5W

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

I asked about the weight kits and they are not provided as part of the purchase;  they may be available as a separate purchase but they also believe that they are primarily for fitting. 

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15*  w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/:Accra iWedge 90 Graphite
Putter:   :taylormade-small:TM-180

Testing:   SPGC_logo.jpg

Backups:  :odyssey-small: Milled Collection RSX 2, :seemore-small: mFGP2, :cameron-small: Futura 5W

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

7 hours ago, Middler said:

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. My ER5B has 278 rounds on it. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag. I am about as anal about caring for my clubs as anyone you'd ever meet, I use iron covers on every other iron. Other guys I play with ask me if my clubs are new, my Mizuno's are 5 years old and my W/S RM Midsize irons were 20 years old when I sold them - still pristine.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the satin v black fence?

[If Evnroll has substantially changed their black process, by all means correct me.]

IMG_2912 2.JPG

IMG_2910.JPG

This is what makes me nervous about any of the various dark finishes on club heads and shafts.  Those kind of wear marks make @GolfSpy_APHget all weak in the knees.... and has my OCD going into hyper-tacacardia 😆

tenor.gif?itemid=8676969

:ping-small: G410 Plus, 9 Degree Driver 

:ping-small: G400 SFT, 16 Degree 3w

:ping-small: G400 SFT, 19 Degree 5w

:srixon-small:  ZX5 Irons 4-AW 

:ping-small: Glide 2.0 56 Degree SW   (removed from double secret probation 😍)

:EVNROLL: ER5v Putter  (Evnroll ER5v Official Review)

:odyssey-small: AI-One Milled Seven T CH (Currently Under Product Test)

 

 

 

Link to comment
Share on other sites

12 hours ago, fixyurdivot said:

This is what makes me nervous about any of the various dark finishes on club heads and shafts.  Those kind of wear marks make @GolfSpy_APHget all weak in the knees.... and has my OCD going into hyper-tacacardia 😆

The correct alphabetical order is CDO…

Walking ahead of my BagBoy QuadXL w Alphard eWheels
Driver: Callaway Mavrik SubZero 9* Neutral w stock Evenflow Riptide R flex shaft
3W  Titelist TS2 15* Draw w Tensei Blue R flex
3H, 4H Cobra One Length F9 Speedback hybrids (1”short) w Fujikura Atmos R flex shaft
5I-GW Cobra Forged TEC Black One Length (1”short, 2* flat) KBS 90 R flex shafts
56, 60 Cobra King MIM One Length Black (1” short) KBS HiRev2.0 125 S flex shafts
ER7  or Scotty Futura X - 35”

OnCore Elixr (lemon or lime)

Link to comment
Share on other sites

I like the look of the 4.1 or 5.2 duo. I am a fan of perpendicular color contrast. Hosel options are nice. Short slant usually works best for me. I'm a fan of these.

Callaway Rogue ST Tripe Diamond 9* w/ Ventus Black 7s
Taylormade Stealth+ 3W w/ RDX Red 75s
PIng G410 3hy
Titleist T200 5-4i w/ Steelfiber i95
Srixon ZX7 A-6i w/ Steelfiber i95
Titleist Vokey SM7 54-10S and 58-08M w/ Steelfiber i110
Mizuno M-Craft IV (blue)

 

Link to comment
Share on other sites

  • 2 weeks later...
On 1/3/2023 at 12:59 PM, Middler said:

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. My ER5B has 278 rounds on it. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag. I am about as anal about caring for my clubs as anyone you'd ever meet, I use iron covers on every other iron. Other guys I play with ask me if my clubs are new, my Mizuno's are 5 years old and my W/S RM Midsize irons were 20 years old when I sold them - still pristine.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the satin v black fence?

[If Evnroll has substantially changed their black process, by all means correct me.]

IMG_2912 2.JPG

IMG_2910.JPG

To be fair, this is similar wear you can expect to see on any black finished putter, especially if it not DLC finished.  Same goes for black steel shafts.  But that discussion is for another thread.

Link to comment
Share on other sites

On 1/3/2023 at 12:59 PM, Middler said:

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. My ER5B has 278 rounds on it. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag. I am about as anal about caring for my clubs as anyone you'd ever meet, I use iron covers on every other iron. Other guys I play with ask me if my clubs are new, my Mizuno's are 5 years old and my W/S RM Midsize irons were 20 years old when I sold them - still pristine.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the satin v black fence?

[If Evnroll has substantially changed their black process, by all means correct me.]

IMG_2912 2.JPG

IMG_2910.JPG

To be fair, this is similar wear you can expect to see on any black finished putter, especially if it not DLC finished.  Same goes for black steel shafts.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...