Ping iCrossover Adapter

[Brian A]

I just got the Ping iCrossover 2 iron and it came with the smoke red, which I feel like is too whippey even with a stiff shaft. I wanted to swap out to smoke black, however these adapters seem different than in the drivers/fairways etc. I’ve looked everywhere for them and can’t find anything? Anyone know anything about these or how I can swap shafts?

[cnosil]

8 minutes ago, Brian A said:

I just got the Ping iCrossover 2 iron and it came with the smoke red, which I feel like is too whippey even with a stiff shaft. I wanted to swap out to smoke black, however these adapters seem different than in the drivers/fairways etc. I’ve looked everywhere for them and can’t find anything? Anyone know anything about these or how I can swap shafts?

I don’t believe it has an adapter and the shaft is simply glued into the hosel like an iron.    For Ping you need a sleeved ferrule.  I would reach out to someone like golfworks and see which ferrule you need 

https://www.golfworks.com/search.aspx?ss=Ping+ferrule

 

 

[Brian A]

10 minutes ago, cnosil said:

I don’t believe it has an adapter and the shaft is simply glued into the hosel like an iron.    For Ping you need a sleeved ferrule.  I would reach out to someone like golfworks and see which ferrule you need 

https://www.golfworks.com/search.aspx?ss=Ping+ferrule

 

 

Here is the adapter on the left for the Icrossover vs the g425 driver on the right. 

[cnosil]

11 minutes ago, Brian A said:

Here is the adapter on the left for the Icrossover vs the g425 driver on the right. 

I looked at the wrong model.  Since it has only been out a couple of months You might be out of luck for now as I don’t see any aftermarket adapters.   You might get lucky and find one from a pull.  You could pull your current shaft and reuse the one you have.  Maybe call Ping and see if they will sell you one or if they will put one on a shaft you provide.  

[Brian A]

Just now, cnosil said:

I looked at the wrong model.  You might be out of luck for now as I don’t see any aftermarket adapters.   You might get lucky and find one from a pull.  You could pull your current shaft and reuse the one you have.  Maybe call Ping and see if they will sell you one or if they will put one on a shaft you provide.  

Thanks, wasn’t sure if it could be reused, maybe I’ll take to golf galaxy since they should know what they’re doing 

[cnosil]

4 minutes ago, Brian A said:

Thanks, wasn’t sure if it could be reused, maybe I’ll take to golf galaxy since they should know what they’re doing 

An experienced club maker can pull an adapter just like they do on drivers.   You could also try here: https://thegolfadapterstore.com/golf-category/ping/ping-adapters/. To see when they might have availability.  I’ve used their ping adapters for some of my shafts.