Jump to content
Testers Wanted! Toura Golf Irons Build Test! ×

My new Byron


Matt Saternus

Recommended Posts

  • SPY VIP

Dave,

I almost quoted you at the "Flow Neck" comment, but decided to read on and see what transpired.

You are in SOOOOOOOOOOOOOOOOOOO much trouble if you are a putter junkie, LOL! Byron's works are awesome and like the general consensus seems to be............you can't stop at one.

The Rincon neck is similar to a Santa Fe neck, if I am not mistaken. Byron also has the ability to craft a neck similar to that of the old Del Mar putters. Some guys call the Del Mar neck the flow neck and I just wanted to say that, either way, Byron has that touch.

Good luck,

LaMont in AZ

nvgolfdude is on the boards now too

the byron presence grows strong. :(

Volvo Intorqueo

All the cool kids follow me on twitter: @GolfspyDave

If you are not a cool kid, following me on twitter will make you cool...

Link to comment
Share on other sites

You guys are determined to get me divorced aren't you, but then again what she doesn't know...

 

Dave I am here to fulfill your Byron needs. Thinking of a custom Byron, shoot me an email - [email protected] If need be we can make something for the wife too. biggrin.gif

[email protected]

 

Best Line of 2010: WOOOOOHHHHOOOOOOOOO!!!!!!!!! TWISTED FREAKING MAGIC!!!!!! This may be the greatest non-porn internet experience of my life! - (sactown)

Link to comment
Share on other sites

Dave I am here to fulfill your Byron needs. Thinking of a custom Byron, shoot me an email - [email protected] If need be we can make something for the wife too. biggrin.gif

 

I like your hustle, Dave, opening up the otherwise-untapped market of selling putters to the wives of putterheads. Not sure how that'll work out, but I admire the effort.

Follow me on Twitter: @MattSaternus

Link to comment
Share on other sites

I like your hustle, Dave, opening up the otherwise-untapped market of selling putters to the wives of putterheads. Not sure how that'll work out, but I admire the effort.

 

 

I am sure TJ's wife would get one.

PING: Rapture V1 9° Aldila VS Proto 'By You' (65 Stiff)

TITLEIST: 906F4 15.5° Aldila VS Proto 'By You' (80 Stiff)

COBRA: 5w Speed LD F/ST Tour AD YS Designed by Graphite Design made for Cobra Stiff

PING: S59 Rifle 6.5 Soft stepped

PING: Tour 48°, 52°, 58°

Byron SS Custom 006

Titelist Pro V 1

Ping hoofer Vantage

"Everyday you miss practicing, it will take you one day longer to get good." -Ben Hogan

Link to comment
Share on other sites

Dave,

I almost quoted you at the "Flow Neck" comment, but decided to read on and see what transpired.

You are in SOOOOOOOOOOOOOOOOOOO much trouble if you are a putter junkie, LOL! Byron's works are awesome and like the general consensus seems to be............you can't stop at one.

Good luck,

LaMont in AZ

 

 

nvgolfdude is on the boards now too

the byron presence grows strong. :(

 

 

Dave I am here to fulfill your Byron needs. Thinking of a custom Byron, shoot me an email - [email protected] If need be we can make something for the wife too. biggrin.gif

 

 

Oh crap

I have a revolving WITB policy.

Link to comment
Share on other sites

Oh YES!!

 

 

I fixed your post for you. :(

PING: Rapture V1 9° Aldila VS Proto 'By You' (65 Stiff)

TITLEIST: 906F4 15.5° Aldila VS Proto 'By You' (80 Stiff)

COBRA: 5w Speed LD F/ST Tour AD YS Designed by Graphite Design made for Cobra Stiff

PING: S59 Rifle 6.5 Soft stepped

PING: Tour 48°, 52°, 58°

Byron SS Custom 006

Titelist Pro V 1

Ping hoofer Vantage

"Everyday you miss practicing, it will take you one day longer to get good." -Ben Hogan

Link to comment
Share on other sites

Ok guys, back to talking about MY putter :) .

 

I got to bring this putter to the course for the first time today and it definitely lived up to the hype and earned its spot as my gamer for 2010. The 330g weight is absolutely perfect - I could be aggressive without fear of blowing it past the hole, but it has enough heft also. I did not miss a single putt inside 10' and left myself very little work after long putts. The greens had a deceptive amount of break in them, and I under-read a few long putts by a couple inches or else I would have some long bombs to talk about as well. All in all, I'm looking forward to having one putter in the bag all year and having it perform this well.

Follow me on Twitter: @MattSaternus

Link to comment
Share on other sites

  • SPY VIP

Ok guys, back to talking about MY putter :) .

 

I got to bring this putter to the course for the first time today and it definitely lived up to the hype and earned its spot as my gamer for 2010. The 330g weight is absolutely perfect - I could be aggressive without fear of blowing it past the hole, but it has enough heft also. I did not miss a single putt inside 10' and left myself very little work after long putts. The greens had a deceptive amount of break in them, and I under-read a few long putts by a couple inches or else I would have some long bombs to talk about as well. All in all, I'm looking forward to having one putter in the bag all year and having it perform this well.

 

Very nice. Now you can send one of the others to byron to change the left bumper for your wife.

Volvo Intorqueo

All the cool kids follow me on twitter: @GolfspyDave

If you are not a cool kid, following me on twitter will make you cool...

Link to comment
Share on other sites

  • SPY VIP

I'm going to change her password so she can't see ridiculous comments like this.

Comments like that and she may grind the right bumper too. :)

 

How did the copper wear today? Any patina marks?

Volvo Intorqueo

All the cool kids follow me on twitter: @GolfspyDave

If you are not a cool kid, following me on twitter will make you cool...

Link to comment
Share on other sites

Comments like that and she may grind the right bumper too. :)

 

How did the copper wear today? Any patina marks?

 

The copper was great. I did put some fine scratch lines on it from wiping it off, but you have to look to see them and I don't mind them since this is a gamer. No patina yet, though we may see something in the morning. I did spray it with a bit of silicone before heading out - I'm really liking the shiny penny look and I think I'll try to keep it that way for a while.

 

You planning on doing anything to speed the patina on your copper?

Follow me on Twitter: @MattSaternus

Link to comment
Share on other sites

  • SPY VIP

The copper was great. I did put some fine scratch lines on it from wiping it off, but you have to look to see them and I don't mind them since this is a gamer. No patina yet, though we may see something in the morning. I did spray it with a bit of silicone before heading out - I'm really liking the shiny penny look and I think I'll try to keep it that way for a while.

 

You planning on doing anything to speed the patina on your copper?

Letting nature take its course. wait and see sounds fun, but maybe I'll hit it with the spray silicone for a while too.

Volvo Intorqueo

All the cool kids follow me on twitter: @GolfspyDave

If you are not a cool kid, following me on twitter will make you cool...

Link to comment
Share on other sites

The copper was great. I did put some fine scratch lines on it from wiping it off, but you have to look to see them and I don't mind them since this is a gamer. No patina yet, though we may see something in the morning. I did spray it with a bit of silicone before heading out - I'm really liking the shiny penny look and I think I'll try to keep it that way for a while.

 

You planning on doing anything to speed the patina on your copper?

 

Matt, isn't glare an issue with the copper? I would think you would want it to patina.

Callaway FT-9 Driver 10.5* Grafalloy Prolaunch Axis Blue

Callaway FT-9 Driver 9.0* Grafalloy Prolaunch Platinum

Cobra Baffler Rail F Fairway 15.5* Fujikura Motore

Wilson FYbrid 19* UST Proforce AXIV Core

Cobra Baffler Rail H Hybrid 22* Fujikura Motore

Ping I15 Irons 5-UW AWT

Ping Tour-W 56*,60* DG Spinner

Ping Redwood ZB Putter, WRX Starshot, 35"

Link to comment
Share on other sites

  • SPY VIP

Probably, but the shiny look looks nice for a while.

My glare is less than the polished stainless 007 I had before. Not too bad yesterday and the sun was bright.

Volvo Intorqueo

All the cool kids follow me on twitter: @GolfspyDave

If you are not a cool kid, following me on twitter will make you cool...

Link to comment
Share on other sites

Matt, isn't glare an issue with the copper? I would think you would want it to patina.

 

Some people might say so, but glare has never bothered me on a club. That might be because I golf in sunglasses.

 

It will definitely patina over time, I won't stop that, but I love the shininess right now.

Follow me on Twitter: @MattSaternus

Link to comment
Share on other sites

Just wanted to post a little update. My putter made the trip to Myrtle with my this past week and after 6 rounds I can say that I've never rolled another putter as consistently well as this one. The headweight is absolutely perfect; it allowed me to be aggressive on every putt. I made tons of putts inside 10 feet and even dropped a 20-25 footer to save a par. It did get a little wet a couple of days, so the patina is starting in the cavity. I'm excited to see what it looks like by the end of the season.

Follow me on Twitter: @MattSaternus

Link to comment
Share on other sites

Congrats. Seems like you've made a good find.

 

 

Thanks. As I described in the first post (I think), it's been a long, but enjoyable process of finding what actually works for me in a putter. Having this just gives me total confidence on the greens.

Follow me on Twitter: @MattSaternus

Link to comment
Share on other sites

  • SPY VIP

Just wanted to post a little update. My putter made the trip to Myrtle with my this past week and after 6 rounds I can say that I've never rolled another putter as consistently well as this one. The headweight is absolutely perfect; it allowed me to be aggressive on every putt. I made tons of putts inside 10 feet and even dropped a 20-25 footer to save a par. It did get a little wet a couple of days, so the patina is starting in the cavity. I'm excited to see what it looks like by the end of the season.

Take pictures as it moves through patina stages...

Volvo Intorqueo

All the cool kids follow me on twitter: @GolfspyDave

If you are not a cool kid, following me on twitter will make you cool...

Link to comment
Share on other sites

We do obsess about our putters, don't we? Our wives/girlfriends/friends that are girls will never understand this - ever.

Callaway FT-9 Driver 10.5* Grafalloy Prolaunch Axis Blue

Callaway FT-9 Driver 9.0* Grafalloy Prolaunch Platinum

Cobra Baffler Rail F Fairway 15.5* Fujikura Motore

Wilson FYbrid 19* UST Proforce AXIV Core

Cobra Baffler Rail H Hybrid 22* Fujikura Motore

Ping I15 Irons 5-UW AWT

Ping Tour-W 56*,60* DG Spinner

Ping Redwood ZB Putter, WRX Starshot, 35"

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...