Jump to content
TESTERS WANTED! ×

Launch Lab? Nah... Just a murdered Fast12 LS


Recommended Posts

Well, almost blacked out anyway. I had to throw a little color in the paintfill, so I matched it to my putter. This is a gloss black polymer. I washed it, and didn't get all the water spots off, but you get the idea. Thoughts?

 

DSC04645.jpg

DSC04650.jpg

DSC04652.jpg

DSC04653.jpg

DSC04647.jpg

DSC04649.jpg

 

I may still redo it in matte black, but have to order that material, as I don't currently have any here. So I refinished it in gloss black so I could see if I like the color in tomorrow's round. I have been playing a ghost since last year, so this is my first foray back to black in a while...

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Looks way better than the stock gray/silver color. Good job!

:cobra-small: SpeedZone 9* w/ Aldila Rogue Silver 60 S
:callaway-small: X2 Hot 3 Deep 14.5* w/ Aldila Tour Green 75 S
:taylormade-small: JetSpeed 5W 19* w/ Matrix Velox T 69 S OR :adams-small: Super LS 3H 19* w/ Kuro Kage Black 80 S
:mizuno-small: JPX919 Forged 4-PW w/ Modus3 105 S
:titelist-small: Vokey SM7 50/08F, 54/14F & 58/08M w/ Modus3 115 Wedge
:EVNROLL: ER1 34" w/ SuperStroke Fatso 2.0
MfleKCg.jpg Pro / 9dZCgaF.jpgH2NO Lite Cart Bag / :Clicgear: 3.0 / :918457628_PrecisionPro: NX7 Pro LRF

My reviews: MLA Putter // Titleist SM7 // PING i500 // PuttOUT

Link to comment
Share on other sites

I like the black,

MENTOR, L4 COACH & TRAINER  FIRST TEE GREATER HOUSTON
HDCP: 8.3  (GHIN: 3143312)
In my bag, April 2023
:titelist-small: TS3 Driver & 4 Wood Hzrdous Smoke Shaft (Stiff Flex)
:titelist-small: TS2 Hybrids  Mitsubishi Tensei Shaft (Stiff Flex)
:mizuno-small:  MP-59 5-PW; KBS Tour (Regular Flex)
:titelist-small: SM8 Wedges

EVNROLL ER2  Putter
SRIXON Z-STAR DIAMOND BALL
Sun Mountain Cart Bag
:Clicgear: 4.0 Push Cart (I'm walking 9 outta 10 rounds!!)

Link to comment
Share on other sites

Looks to be the same color as my Cobra S2. How long will that color last in use ?

 

 

Shambles

 

 

As long or longer than a factory paint job. It's a polymer finish and they're much more durable than paint.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

It's a polymer finish and they're much more durable than paint.

What's that?

MENTOR, L4 COACH & TRAINER  FIRST TEE GREATER HOUSTON
HDCP: 8.3  (GHIN: 3143312)
In my bag, April 2023
:titelist-small: TS3 Driver & 4 Wood Hzrdous Smoke Shaft (Stiff Flex)
:titelist-small: TS2 Hybrids  Mitsubishi Tensei Shaft (Stiff Flex)
:mizuno-small:  MP-59 5-PW; KBS Tour (Regular Flex)
:titelist-small: SM8 Wedges

EVNROLL ER2  Putter
SRIXON Z-STAR DIAMOND BALL
Sun Mountain Cart Bag
:Clicgear: 4.0 Push Cart (I'm walking 9 outta 10 rounds!!)

Link to comment
Share on other sites

Polymer is similar to powdercoat, but it goes on much thinner (roughly 1 mil thick (not a millimeter, but a mil, a thousandth of an inch)). The application process is similar to powdercoat as well, but not quite. It's a baked finish to harden it.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Sounds interesting.....Do you need a special gun?

MENTOR, L4 COACH & TRAINER  FIRST TEE GREATER HOUSTON
HDCP: 8.3  (GHIN: 3143312)
In my bag, April 2023
:titelist-small: TS3 Driver & 4 Wood Hzrdous Smoke Shaft (Stiff Flex)
:titelist-small: TS2 Hybrids  Mitsubishi Tensei Shaft (Stiff Flex)
:mizuno-small:  MP-59 5-PW; KBS Tour (Regular Flex)
:titelist-small: SM8 Wedges

EVNROLL ER2  Putter
SRIXON Z-STAR DIAMOND BALL
Sun Mountain Cart Bag
:Clicgear: 4.0 Push Cart (I'm walking 9 outta 10 rounds!!)

Link to comment
Share on other sites

DIY. I do all my own work and customization

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

It's sprayed, do it in a toaster oven, son't want those fumes in where I cook my food. Bought the toaster oven for this purpose.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

It's not durable enough for irons is it?

MENTOR, L4 COACH & TRAINER  FIRST TEE GREATER HOUSTON
HDCP: 8.3  (GHIN: 3143312)
In my bag, April 2023
:titelist-small: TS3 Driver & 4 Wood Hzrdous Smoke Shaft (Stiff Flex)
:titelist-small: TS2 Hybrids  Mitsubishi Tensei Shaft (Stiff Flex)
:mizuno-small:  MP-59 5-PW; KBS Tour (Regular Flex)
:titelist-small: SM8 Wedges

EVNROLL ER2  Putter
SRIXON Z-STAR DIAMOND BALL
Sun Mountain Cart Bag
:Clicgear: 4.0 Push Cart (I'm walking 9 outta 10 rounds!!)

Link to comment
Share on other sites

Looks great except for all the crap from the site hangin' over the pics so I can't get a clear shot.

COBRA KING LTD Matrix Ozik HD6

ADAMS Super S 3w & 5w Matrix Radix HD S VI

CLEVELAND GlideRail 20.5* Kuro Kage 80i

CALLAWAY Apex Forged 5-PW UST Recoil 680

INNOVEX Type S GDT 50* & 54* Kuro Kage 80i

ODYSSEY Tri-ball SRT 34"

Link to comment
Share on other sites

It's not durable enough for irons is it?

 

No, it'd wear off the soles and faces.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

No, it'd wear off the soles and faces.

That's what I figured. I have a set of Mizuno T-Zoid Pro heads I'm thinking about experimenting on. They're not in terrible shape, but not pristine either.

MENTOR, L4 COACH & TRAINER  FIRST TEE GREATER HOUSTON
HDCP: 8.3  (GHIN: 3143312)
In my bag, April 2023
:titelist-small: TS3 Driver & 4 Wood Hzrdous Smoke Shaft (Stiff Flex)
:titelist-small: TS2 Hybrids  Mitsubishi Tensei Shaft (Stiff Flex)
:mizuno-small:  MP-59 5-PW; KBS Tour (Regular Flex)
:titelist-small: SM8 Wedges

EVNROLL ER2  Putter
SRIXON Z-STAR DIAMOND BALL
Sun Mountain Cart Bag
:Clicgear: 4.0 Push Cart (I'm walking 9 outta 10 rounds!!)

Link to comment
Share on other sites

Great job Rookie! I love the look of it. They should hire you to design their clubs

Inside My Blue Callaway Warbird X Golf Stand Bag:

Driver:Nike SQ 10.5* with Graphite Design Y6+

3W:Cobra S2 14*

4W: Nike SQ Dymo 17*

3H and 4H: Taylormade Rescue 19* and 22*

5H: Cleveland Mashie 23*

6H: Adams a3os Hollow-Back

7Iron-Sand Wedge:Callaway X-20 Series with Callaway Steel

Lob Wedge (60*):Cleveland CG-12 Black Pearl with Cleveland TRaction Steel Wedge Flex

Putter: Odyssey Versa #9

Golfball: Callaway Hex Black Tour

Link to comment
Share on other sites

That's what I figured. I have a set of Mizuno T-Zoid Pro heads I'm thinking about experimenting on. They're not in terrible shape, but not pristine either.

 

Etch the chrome with mutation acid if you have to DIY (I wouldn't, it creates hexavalent chromium) or take them and have the chrome stripped then do either a black ox or flame finish on them. They look good that way.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Etch the chrome with mutation acid if you have to DIY (I wouldn't, it creates hexavalent chromium) or take them and have the chrome stripped then do either a black ox or flame finish on them. They look good that way.

 

They look good only for a while. I've never found a way of coating forged irons that were worth the trouble, except having them plated again. The alternative is to leave them raw until they develop an even dark patina and use them that way. The most difficult part of this is leaving them alone during the transition period. They look disgusting and there is a strong temptation to treat the splotches that develop that must be resisted. Once you get past that the clubs maintain their looks so well you need to think a bit to remember how old they actually are. At that point maintenance is just a matter of keeping them clean with water and a stiff nylon brush to avoid developing pits.

 

The alternative is to use rust converter which gives it a color. Mine became a dirty grey/white. That also comes off with use but can be reapplied with just a brush and let dry. This becomes old after a while for me, but some people enjoy the time usage.

 

 

Shambles

Link to comment
Share on other sites

I like it, I don't mind the gray crown on mine but that black crown looks slick, The paint fill I would have gone blood red personally. But the blue doesn't look bad either.

Callaway Epic Max 12.0 (-1/N) @ 44.50" w/ Graphite Design Tour AD IZ-7 Stiff

Callaway Epic Speed 18.0* @ 42.75" w/ Graphite Design Tour AD IZ-8 Stiff

Callaway Mavrik Pro 23.0* @ 40.00" w/ Graphite Design Tour AD IZ 95 HYB Stiff

Sub-70 639 Combo (5-P) w/ Nippon Modus 3 125 Stiff, Standard Length, Weak Lofts (27-47, 4* gaps)

Callaway MD5 Raw 51-11 S-Grind w/ Nippon Modus 125 Wedge

Callaway MD5 Raw 55-13 X-Grind w/ Nippon Modus 125 Wedge

Callaway MD5 Raw 59-11 S-Grind w/ Nippon Modus 125 Wedge

Callaway MD5 Raw 63-09 C-Grind w/ Nippon Modus 125 Wedge

Golf Swing & Putting -- Bruce Rearick (Burnt Edges Consulting)

Link to comment
Share on other sites

I like it, I don't mind the gray crown on mine but that black crown looks slick, The paint fill I would have gone blood red personally. But the blue doesn't look bad either.

 

I'm about to redo it again. I'm going ultra flat matte black on the crown and smoke grey paintfill.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Well, the ultra matte black is on now. Curing as I type. I'll shoot some pics tomorrow in the daylight.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Here it is with the matte black polymer. I actually had to do the polymer twice because the first time I screwed up and bumped into it before I got it into the baking apparatus.

 

Oh, and the paintfill is in now and drying. It's white.

 

She's shipping out tomorrow in a trade.

 

DSC04672.jpg

DSC04666.jpg

DSC04667.jpg

DSC04668.jpg

DSC04669.jpg

DSC04671.jpg

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Dayum that's sharp. Makes me want to paint my R11 :unsure:

MENTOR, L4 COACH & TRAINER  FIRST TEE GREATER HOUSTON
HDCP: 8.3  (GHIN: 3143312)
In my bag, April 2023
:titelist-small: TS3 Driver & 4 Wood Hzrdous Smoke Shaft (Stiff Flex)
:titelist-small: TS2 Hybrids  Mitsubishi Tensei Shaft (Stiff Flex)
:mizuno-small:  MP-59 5-PW; KBS Tour (Regular Flex)
:titelist-small: SM8 Wedges

EVNROLL ER2  Putter
SRIXON Z-STAR DIAMOND BALL
Sun Mountain Cart Bag
:Clicgear: 4.0 Push Cart (I'm walking 9 outta 10 rounds!!)

Link to comment
Share on other sites

They look good only for a while. I've never found a way of coating forged irons that were worth the trouble, except having them plated again. The alternative is to leave them raw until they develop an even dark patina and use them that way. The most difficult part of this is leaving them alone during the transition period. They look disgusting and there is a strong temptation to treat the splotches that develop that must be resisted. Once you get past that the clubs maintain their looks so well you need to think a bit to remember how old they actually are. At that point maintenance is just a matter of keeping them clean with water and a stiff nylon brush to avoid developing pits.

 

The alternative is to use rust converter which gives it a color. Mine became a dirty grey/white. That also comes off with use but can be reapplied with just a brush and let dry. This becomes old after a while for me, but some people enjoy the time usage.

 

 

Shambles

 

I'm a patina guy myself. But I'm also impatient, so as an alternative, I use Plum Brown and reapply until the natural method takes hold. This gives me the dark finish I want until it naturally develops on it's own.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

They look good only for a while. I've never found a way of coating forged irons that were worth the trouble, except having them plated again. The alternative is to leave them raw until they develop an even dark patina and use them that way. The most difficult part of this is leaving them alone during the transition period. They look disgusting and there is a strong temptation to treat the splotches that develop that must be resisted. Once you get past that the clubs maintain their looks so well you need to think a bit to remember how old they actually are. At that point maintenance is just a matter of keeping them clean with water and a stiff nylon brush to avoid developing pits.

 

The alternative is to use rust converter which gives it a color. Mine became a dirty grey/white. That also comes off with use but can be reapplied with just a brush and let dry. This becomes old after a while for me, but some people enjoy the time usage.

 

 

Shambles

 

You can also use gun blue on them. It wears off but you can reapply it as needed and it is really simple and not a messy job. Just put some on a cloth and wipe them down they look good as new. I have done this on some wedges and reapply it in the kitchen and my wife has never complained. so if is has a wife seal of approval in the kitchen, you know it is not messy or stinky.

:ping-small:G430LST 10.5° on     T P T    POWER 18 Hi Driver 

:ping-small:G430MAX 3w  on     T P T    POWER 18 Hi Fairway 

:ping-small:G425 3H on     T P T    POWER 18 Hi Hybrid 

:taylormade-small:P790 Black 4-A 
on :kbs: TGI 80S
 

:mizuno-small: ES21 54-8° & 58-12° on :kbs: Hi Rev

:L.A.B.:DF2.1 on :accra: White

:titelist-small: ProV1  

:918457628_PrecisionPro: Precision Pro  NX7 Pro

All Iron grips are BestGrips Micro-Perforated Mid

Driver, 3w, 3H are JumboMax JMX UltraLite XS 

Link to comment
Share on other sites

You can also use gun blue on them. It wears off but you can reapply it as needed and it is really simple and not a messy job. Just put some on a cloth and wipe them down they look good as new. I have done this on some wedges and reapply it in the kitchen and my wife has never complained. so if is has a wife seal of approval in the kitchen, you know it is not messy or stinky.

 

That's what Plum Brown is. Another rust color control method (that's all black ox is in the cold form, controlling the color of rapidly rusting). Thing that sucks is if you have a sandy range or hit a bunker shot, it's gone after 1 ball. That's why I use plum brown because I like dark patina (see rust). The plum brown lasts a little longer and you don't notice when the rust starts forming on its own. Close to the same application method as cold black ox.

 

Here's one I recently did in plum brown:

DSC04591.jpg

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Is there an easy DIY way to strip off the chrome?

MENTOR, L4 COACH & TRAINER  FIRST TEE GREATER HOUSTON
HDCP: 8.3  (GHIN: 3143312)
In my bag, April 2023
:titelist-small: TS3 Driver & 4 Wood Hzrdous Smoke Shaft (Stiff Flex)
:titelist-small: TS2 Hybrids  Mitsubishi Tensei Shaft (Stiff Flex)
:mizuno-small:  MP-59 5-PW; KBS Tour (Regular Flex)
:titelist-small: SM8 Wedges

EVNROLL ER2  Putter
SRIXON Z-STAR DIAMOND BALL
Sun Mountain Cart Bag
:Clicgear: 4.0 Push Cart (I'm walking 9 outta 10 rounds!!)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...