Jump to content

help! scratch wedges question.


Recommended Posts

Hi everyone, I recently got a set of scratch wedges for a good deal. The only stipulation was that I would not be Sure What shaft came in it. I can usually identify a shaft through stickers or markings. I am pretty sure that the shafts are either dynamic gold, kbs hi rev, or dynalite. Any help on identifying them would be greatly appreciated. Let me know of any info you need to help. Thanks everyone!

Driver- Tmag 2017 M2 tour issue 8.5* actual loft 7.8* w/ HZRDS Green PVD 70TX"
Fairway Metal- Taylormade SLDR Mini Driver 12* w/ Fujikura Rombax TP95-X"

Utility- Mizuno MPH5 1 iron w/ Aldila RIP 85X (depending on course/ conditions)

Irons- Mizuno MP- FLI HI 2i w/ Aldila Proto ByYou 100X
          Mizuno MP59 4i-6I w/ PX 6.5

          Mizuno MP69 7i-PW w/ PX 6.5

Wedges- Scratch 8620 Driver/Slider set.  50*, 54* bent to 55* and 60*

Putter- Taylormade Spider Tour w/ flow neck
Ball- Bridgestone Tour B X

Bag- Sun Mountain C130 Supercharged

Link to comment
Share on other sites

Hi everyone, I recently got a set of scratch wedges for a good deal. The only stipulation was that I would not be Sure What shaft came in it. I can usually identify a shaft through stickers or markings. I am pretty sure that the shafts are either dynamic gold, kbs hi rev, or dynalite. Any help on identifying them would be greatly appreciated. Let me know of any info you need to help. Thanks everyone!

 

Pictures would be a great start. I'm guessing you got them from Rock Bottom?

Driver: :taylormade-small: SLDR w/ Fujikura Ventus Black

3w: :taylormade-small:'16 M2 hl w/ Diamana D+ 82

5w: :cleveland-small: Launcher HB w/ HZRDUS Yellow

Hybrid: :cleveland-small: 22 deg. Launcher HB w/ HZRDUS Black

Irons: :cleveland-small: 5i - gap Launcher CBX w/ Nippon Modus 3 125

Wedges: :cleveland-small: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125

Putter: :odyssey-small: Red 7s

Link to comment
Share on other sites

Good call man, I will prolly get them reshafted but I would at least like an idea of what is In there now. I can't do pictures until tomorrow. Its tapered if that helps.

Driver- Tmag 2017 M2 tour issue 8.5* actual loft 7.8* w/ HZRDS Green PVD 70TX"
Fairway Metal- Taylormade SLDR Mini Driver 12* w/ Fujikura Rombax TP95-X"

Utility- Mizuno MPH5 1 iron w/ Aldila RIP 85X (depending on course/ conditions)

Irons- Mizuno MP- FLI HI 2i w/ Aldila Proto ByYou 100X
          Mizuno MP59 4i-6I w/ PX 6.5

          Mizuno MP69 7i-PW w/ PX 6.5

Wedges- Scratch 8620 Driver/Slider set.  50*, 54* bent to 55* and 60*

Putter- Taylormade Spider Tour w/ flow neck
Ball- Bridgestone Tour B X

Bag- Sun Mountain C130 Supercharged

Link to comment
Share on other sites

They're dynalites. I bought those wedges as well awhile back. They're great wedges!

Driver: TaylorMade R9 9.5* with a Diamana Kai'li 70 S shaft

Fairway: TaylorMade R9 TP 13* with Graphite Design Tour AD YSQ-st X flex

 

UtilityWilson Staff FYbrid 19.5* Aldila RIP Sigma Stiff

 

Irons: Wilson Staff FG Tour V2 KBS Tour X flex 4-pw (soft-stepped)

Wedges: Wilson Staff FG Tour TC 50* (standard grind, bent to 51*) TT DG Spinner, 56* and 60* (tour grinds, bent to 55* and 59*) Dynamic Gold Wedge flex

Putter: Yes! Abbie Tour Forged Pro Series 33" 

Ball: Wilson Staff FG Tour, Maxfli U4

 

Bag: Wilson Staff NeXus 100th Anniversary carry bag

 

Backup Irons: Wilson Staff FG-17 Tour Blades with TT Dynamic Stiff 3-PW

 

Backup Utility: Mizuno MP-H4 2 iron TT Dynamic Gold R300

 

Backup Putter: Pro Gear CG 100 33" (Pro Gear is what turned into Yes!)

Link to comment
Share on other sites

They're dynalites. I bought those wedges as well awhile back. They're great wedges!

You sure? I figured since they were tapered they weren't dg's but i don't know much about kbs or dynalite. Guess I will have to get them reshafted with s400s to go with my x100s. Pity BC I really wanted to test out the hi revs.

Driver- Tmag 2017 M2 tour issue 8.5* actual loft 7.8* w/ HZRDS Green PVD 70TX"
Fairway Metal- Taylormade SLDR Mini Driver 12* w/ Fujikura Rombax TP95-X"

Utility- Mizuno MPH5 1 iron w/ Aldila RIP 85X (depending on course/ conditions)

Irons- Mizuno MP- FLI HI 2i w/ Aldila Proto ByYou 100X
          Mizuno MP59 4i-6I w/ PX 6.5

          Mizuno MP69 7i-PW w/ PX 6.5

Wedges- Scratch 8620 Driver/Slider set.  50*, 54* bent to 55* and 60*

Putter- Taylormade Spider Tour w/ flow neck
Ball- Bridgestone Tour B X

Bag- Sun Mountain C130 Supercharged

Link to comment
Share on other sites

You sure? I figured since they were tapered they weren't dg's but i don't know much about kbs or dynalite. Guess I will have to get them reshafted with s400s to go with my x100s. Pity BC I really wanted to test out the hi revs.

Yep, mine have "True Temper Dynalite Gold" on the shaft itself (not a sticker) about 6-8" above the ferrule.

Driver: TaylorMade R9 9.5* with a Diamana Kai'li 70 S shaft

Fairway: TaylorMade R9 TP 13* with Graphite Design Tour AD YSQ-st X flex

 

UtilityWilson Staff FYbrid 19.5* Aldila RIP Sigma Stiff

 

Irons: Wilson Staff FG Tour V2 KBS Tour X flex 4-pw (soft-stepped)

Wedges: Wilson Staff FG Tour TC 50* (standard grind, bent to 51*) TT DG Spinner, 56* and 60* (tour grinds, bent to 55* and 59*) Dynamic Gold Wedge flex

Putter: Yes! Abbie Tour Forged Pro Series 33" 

Ball: Wilson Staff FG Tour, Maxfli U4

 

Bag: Wilson Staff NeXus 100th Anniversary carry bag

 

Backup Irons: Wilson Staff FG-17 Tour Blades with TT Dynamic Stiff 3-PW

 

Backup Utility: Mizuno MP-H4 2 iron TT Dynamic Gold R300

 

Backup Putter: Pro Gear CG 100 33" (Pro Gear is what turned into Yes!)

Link to comment
Share on other sites

Want to know for sure? Pull the grip and there will be a silkscreen on the butt of the shaft. It'll have the code for what shaft and flex it is.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

There are no stickers or stamped writing on the shaft at all other than a barcode with d/s near the grip for driver/slider. I guess I am going to have to pull the grip.

20130728_115940.jpg

20130728_115922.jpg

20130728_115902.jpg

Driver- Tmag 2017 M2 tour issue 8.5* actual loft 7.8* w/ HZRDS Green PVD 70TX"
Fairway Metal- Taylormade SLDR Mini Driver 12* w/ Fujikura Rombax TP95-X"

Utility- Mizuno MPH5 1 iron w/ Aldila RIP 85X (depending on course/ conditions)

Irons- Mizuno MP- FLI HI 2i w/ Aldila Proto ByYou 100X
          Mizuno MP59 4i-6I w/ PX 6.5

          Mizuno MP69 7i-PW w/ PX 6.5

Wedges- Scratch 8620 Driver/Slider set.  50*, 54* bent to 55* and 60*

Putter- Taylormade Spider Tour w/ flow neck
Ball- Bridgestone Tour B X

Bag- Sun Mountain C130 Supercharged

Link to comment
Share on other sites

You could measure the steps as well and I could maybe tell you by the step length if its in the reference I have

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

You could measure the steps as well and I could maybe tell you by the step length if its in the reference I have

Sorry for sounding like a noob but what do you mean by step length?

Driver- Tmag 2017 M2 tour issue 8.5* actual loft 7.8* w/ HZRDS Green PVD 70TX"
Fairway Metal- Taylormade SLDR Mini Driver 12* w/ Fujikura Rombax TP95-X"

Utility- Mizuno MPH5 1 iron w/ Aldila RIP 85X (depending on course/ conditions)

Irons- Mizuno MP- FLI HI 2i w/ Aldila Proto ByYou 100X
          Mizuno MP59 4i-6I w/ PX 6.5

          Mizuno MP69 7i-PW w/ PX 6.5

Wedges- Scratch 8620 Driver/Slider set.  50*, 54* bent to 55* and 60*

Putter- Taylormade Spider Tour w/ flow neck
Ball- Bridgestone Tour B X

Bag- Sun Mountain C130 Supercharged

Link to comment
Share on other sites

That shaft doesn't actually have steps, so I'd guess it's the FST. Both Dynamic Golf and Dynalite have steps in the shaft. A step is a ridge where the shaft gets bigger, looks like progressively larger ripples. A stepless shaft if one that is smooth the entire length of the shaft.

 

I've never used the FST Hi-Rev shaft though so can't say for sure if that is what it is. Maybe someone else can say for sure, otherwise like RB said you can pull the grip.

Driver: :taylormade-small: SLDR w/ Fujikura Ventus Black

3w: :taylormade-small:'16 M2 hl w/ Diamana D+ 82

5w: :cleveland-small: Launcher HB w/ HZRDUS Yellow

Hybrid: :cleveland-small: 22 deg. Launcher HB w/ HZRDUS Black

Irons: :cleveland-small: 5i - gap Launcher CBX w/ Nippon Modus 3 125

Wedges: :cleveland-small: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125

Putter: :odyssey-small: Red 7s

Link to comment
Share on other sites

That shaft doesn't actually have steps, so I'd guess it's the FST. Both Dynamic Golf and Dynalite have steps in the shaft. A step is a ridge where the shaft gets bigger, looks like progressively larger ripples. A stepless shaft if one that is smooth the entire length of the shaft.

 

I've never used the FST Hi-Rev shaft though so can't say for sure if that is what it is. Maybe someone else can say for sure, otherwise like RB said you can pull the grip.

OK good I Thought I was an idiot for a second. Haha there are no steps in this shaft like you said. I'm not very familiar with kbs or dynalite shafts but had basically ruled out dynamic gold just BC I am pretty familiar with them (or at least I Think I am).

Driver- Tmag 2017 M2 tour issue 8.5* actual loft 7.8* w/ HZRDS Green PVD 70TX"
Fairway Metal- Taylormade SLDR Mini Driver 12* w/ Fujikura Rombax TP95-X"

Utility- Mizuno MPH5 1 iron w/ Aldila RIP 85X (depending on course/ conditions)

Irons- Mizuno MP- FLI HI 2i w/ Aldila Proto ByYou 100X
          Mizuno MP59 4i-6I w/ PX 6.5

          Mizuno MP69 7i-PW w/ PX 6.5

Wedges- Scratch 8620 Driver/Slider set.  50*, 54* bent to 55* and 60*

Putter- Taylormade Spider Tour w/ flow neck
Ball- Bridgestone Tour B X

Bag- Sun Mountain C130 Supercharged

Link to comment
Share on other sites

Yeah the pics didn't load on the phone when I was on there earlier. That looks like it could be a Rifle spinner or some form of Rifle (or PX since they bought out royal precision). I'm leaning toward a Rifle Spinner as they had stick on shaft bands as opposed to silk screened labels that PX does. The HiRev, at least the ones I had were stepped.

 

I'm betting on it being a RP Rifle or Rifle Spinner. Going from memory, I believe the code on the butt is something like URSWES or URSWEX (for s or x flex) for the spinner.

 

http://www.royalprecision.com/royalprecision/rifle.asp

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Yeah the pics didn't load on the phone when I was on there earlier. That looks like it could be a Rifle spinner or some form of Rifle (or PX since they bought out royal precision). I'm leaning toward a Rifle Spinner as they had stick on shaft bands as opposed to silk screened labels that PX does. The HiRev, at least the ones I had were stepped.

 

I'm betting on it being a RP Rifle or Rifle Spinner. Going from memory, I believe the code on the butt is something like URSWES or URSWEX (for s or x flex) for the spinner.

 

http://www.royalprecision.com/royalprecision/rifle.asp

Well I guess I will pull the grip then. I don't suppose their is a way of doing that to save the grip? If not I can just cut it off and regrip but I was hoping to save some $$ until I got my bag set up how I want it lol

Driver- Tmag 2017 M2 tour issue 8.5* actual loft 7.8* w/ HZRDS Green PVD 70TX"
Fairway Metal- Taylormade SLDR Mini Driver 12* w/ Fujikura Rombax TP95-X"

Utility- Mizuno MPH5 1 iron w/ Aldila RIP 85X (depending on course/ conditions)

Irons- Mizuno MP- FLI HI 2i w/ Aldila Proto ByYou 100X
          Mizuno MP59 4i-6I w/ PX 6.5

          Mizuno MP69 7i-PW w/ PX 6.5

Wedges- Scratch 8620 Driver/Slider set.  50*, 54* bent to 55* and 60*

Putter- Taylormade Spider Tour w/ flow neck
Ball- Bridgestone Tour B X

Bag- Sun Mountain C130 Supercharged

Link to comment
Share on other sites

Well I guess I will pull the grip then. I don't suppose their is a way of doing that to save the grip? If not I can just cut it off and regrip but I was hoping to save some $$ until I got my bag set up how I want it lol

 

 

If you own an air compressor and a blowgun attachment, you can blow the grip off and then blow it back on later. Or yo can use a v tool and work it under the grip and remove it that way. If you have neither, you could fashion one with an old wire coathanger and do it that way. It's more work using the coathanger, but you can save it using one. Just cut the straight portion out of it (I saved 4 inches after the bend for my handle). Make a loop at one end. This is the end you'll work under the grip. Carefully work it under the grip, adding solvent every little bit until you've worked the coat hanger in the length of the grip and can move it around the shaft. Then, simply slide the grip off. Hopefully ou have a bore brush you can remove the tape goop with prior to reinstalling.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

That shaft doesn't actually have steps, so I'd guess it's the FST. Both Dynamic Golf and Dynalite have steps in the shaft. A step is a ridge where the shaft gets bigger, looks like progressively larger ripples. A stepless shaft if one that is smooth the entire length of the shaft.

 

I've never used the FST Hi-Rev shaft though so can't say for sure if that is what it is. Maybe someone else can say for sure, otherwise like RB said you can pull the grip.

Wow, good eye. I didn't realize that. Definitely not the same Dynalites mine had. I'm jealous!

Driver: TaylorMade R9 9.5* with a Diamana Kai'li 70 S shaft

Fairway: TaylorMade R9 TP 13* with Graphite Design Tour AD YSQ-st X flex

 

UtilityWilson Staff FYbrid 19.5* Aldila RIP Sigma Stiff

 

Irons: Wilson Staff FG Tour V2 KBS Tour X flex 4-pw (soft-stepped)

Wedges: Wilson Staff FG Tour TC 50* (standard grind, bent to 51*) TT DG Spinner, 56* and 60* (tour grinds, bent to 55* and 59*) Dynamic Gold Wedge flex

Putter: Yes! Abbie Tour Forged Pro Series 33" 

Ball: Wilson Staff FG Tour, Maxfli U4

 

Bag: Wilson Staff NeXus 100th Anniversary carry bag

 

Backup Irons: Wilson Staff FG-17 Tour Blades with TT Dynamic Stiff 3-PW

 

Backup Utility: Mizuno MP-H4 2 iron TT Dynamic Gold R300

 

Backup Putter: Pro Gear CG 100 33" (Pro Gear is what turned into Yes!)

Link to comment
Share on other sites

Hi everyone, thanks for the help. One of my buddies who is a little more familiar with Rifle shafts confirmed thats what it is. I am going to hold off reshafting them for a bit just to see what I think of these. Honestly I was having issue keeping balls on the green bc I would hit shots at the pin and the ball would usually do the one hop and stop with my old Vokeys but instead was spinning 15-20 ft back and sometimes off the green (new grooves will do that for you I guess LOL). Either way I started to get them figured out and am liking them so far.

 

Thanks for all the help identifying them!

Driver- Tmag 2017 M2 tour issue 8.5* actual loft 7.8* w/ HZRDS Green PVD 70TX"
Fairway Metal- Taylormade SLDR Mini Driver 12* w/ Fujikura Rombax TP95-X"

Utility- Mizuno MPH5 1 iron w/ Aldila RIP 85X (depending on course/ conditions)

Irons- Mizuno MP- FLI HI 2i w/ Aldila Proto ByYou 100X
          Mizuno MP59 4i-6I w/ PX 6.5

          Mizuno MP69 7i-PW w/ PX 6.5

Wedges- Scratch 8620 Driver/Slider set.  50*, 54* bent to 55* and 60*

Putter- Taylormade Spider Tour w/ flow neck
Ball- Bridgestone Tour B X

Bag- Sun Mountain C130 Supercharged

Link to comment
Share on other sites

Dead arming chips with new grooves and spinner shafts seems to help till you get used to them. That or find a sandy range and beat some balls with them (or just practice in a bunker) for a day or two.

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...