CoxBox23

Their costs are all pretty much industry standard. The Foreward heads cost about the same as TM P7MCs/Mizuno 24x and a bit cheaper than Titliest Txxx. Their build fees seemed pretty on par and every price I got quoted for shafts/grips/ferrule were pretty much exactly what you can find them for anywhere (no price gouging from my build)

Right on. I know Chad and his guys use the mevo+ when they are outdoors, just wanted to reiterate so someone doesn’t make the same mistake as me and have to keep doing the test multiple times over (it’s a pretty hefty test to have to keep repeating lol). I will say the more you hit the Foreward heads the more likely you’ll end up choosing them 😂 (they don’t even pressure you to buy their heads either). The best part is they’ll give you options in certain categories to help cut costs too, like if you fit into a graphite they’ll do their best to give you a steel equivalent (if possible) 

Thoroughly enjoyed my process with this fitting. I already had an idea on how to do it because I’d watched a few of their live fittings from instagram. I had to do the test 3 times because I goofed the first two times and finally figured it out by the third time, I will say the nicer quality the launch monitor the better the entire process goes. The clubs coming chalky is really on whoever had the case prior to yourself because you’ll likely be shipping them direct to the next person on the list when it comes time to send them off. They bring the clubs back after a certain number of fittings to clean them up and check the swing weight/lie/other things. I just got my irons from my prescription 2 weeks ago and could not be more happy. Chad is a freaking wizard for creating such an awesome product/process and Dan is so chill to work with throughout the entire process. Hope you get dialed in and enjoy your prescription as much as I am enjoying mine 

Their costs are all pretty much industry standard. The Foreward heads cost about the same as TM P7MCs/Mizuno 24x and a bit cheaper than Titliest Txxx. Their build fees seemed pretty on par and every price I got quoted for shafts/grips/ferrule were pretty much exactly what you can find them for anywhere (no price gouging from my build)

Which bounce did you end up with? And I assume you landed pretty standard on swing weight? And if your anything like me it’ll just about turn any sort of fade into what appears as dead straight shot and whatever distance you lose from the height gained will offset by the distance lost on over fade/draw 

Right on. I know Chad and his guys use the mevo+ when they are outdoors, just wanted to reiterate so someone doesn’t make the same mistake as me and have to keep doing the test multiple times over (it’s a pretty hefty test to have to keep repeating lol). I will say the more you hit the Foreward heads the more likely you’ll end up choosing them 😂 (they don’t even pressure you to buy their heads either). The best part is they’ll give you options in certain categories to help cut costs too, like if you fit into a graphite they’ll do their best to give you a steel equivalent (if possible) 

I hope your monitor also picks up club data semi accurate as well as ball side spin. That was my first two failed attempts was poor club data (face closure/path mainly). I tried on a garmin r10 twice but just wasn’t happy with the club data and too many misread spins (low spin readings and nuked knuckleballs). Rented out a bay on a trackman and knocked it all out my third attempt. I will say my prescription has me hitting ball heights I never in a million years would have guessed I could touch. I told my buddy I could touch the moon with my new irons after my first time on the range lol. 

Thoroughly enjoyed my process with this fitting. I already had an idea on how to do it because I’d watched a few of their live fittings from instagram. I had to do the test 3 times because I goofed the first two times and finally figured it out by the third time, I will say the nicer quality the launch monitor the better the entire process goes. The clubs coming chalky is really on whoever had the case prior to yourself because you’ll likely be shipping them direct to the next person on the list when it comes time to send them off. They bring the clubs back after a certain number of fittings to clean them up and check the swing weight/lie/other things. I just got my irons from my prescription 2 weeks ago and could not be more happy. Chad is a freaking wizard for creating such an awesome product/process and Dan is so chill to work with throughout the entire process. Hope you get dialed in and enjoy your prescription as much as I am enjoying mine 

Their costs are all pretty much industry standard. The Foreward heads cost about the same as TM P7MCs/Mizuno 24x and a bit cheaper than Titliest Txxx. Their build fees seemed pretty on par and every price I got quoted for shafts/grips/ferrule were pretty much exactly what you can find them for anywhere (no price gouging from my build)

Here is the combo that I plan on doing.  I think I will be doing the golden weights instead of the black though.

Their costs are all pretty much industry standard. The Foreward heads cost about the same as TM P7MCs/Mizuno 24x and a bit cheaper than Titliest Txxx. Their build fees seemed pretty on par and every price I got quoted for shafts/grips/ferrule were pretty much exactly what you can find them for anywhere (no price gouging from my build)

Which bounce did you end up with? And I assume you landed pretty standard on swing weight? And if your anything like me it’ll just about turn any sort of fade into what appears as dead straight shot and whatever distance you lose from the height gained will offset by the distance lost on over fade/draw 

The Specs are pretty similar to what I have other than the shaft and the lie.  CC had me 1* upright on the clubs instead of flat, but I have also changed my swing since that fitting.  Weight of the shaft is the same.
For cost, I just rebuild my Srixons online without the black head which I think added another $250-300 total to price were a little over $1700 and the Forewards come out to $2100 with everything I want.  Ferrule choice, grip, head color, etc.
I am.  I landed on D4 just like my Srixons.  I think we ended up with the mid bounce which match the Srixon pretty close.  My typical miss is a pull/fade and the adjustments should help straighten that out.

They are a couple months out on clubheads so I'm going to put a deposit down. If I can get ball flight in that 60ft range with my same distance and a tighter dispersion I'm going to be incredibly happy!  

Right on. I know Chad and his guys use the mevo+ when they are outdoors, just wanted to reiterate so someone doesn’t make the same mistake as me and have to keep doing the test multiple times over (it’s a pretty hefty test to have to keep repeating lol). I will say the more you hit the Foreward heads the more likely you’ll end up choosing them 😂 (they don’t even pressure you to buy their heads either). The best part is they’ll give you options in certain categories to help cut costs too, like if you fit into a graphite they’ll do their best to give you a steel equivalent (if possible) 

I hope your monitor also picks up club data semi accurate as well as ball side spin. That was my first two failed attempts was poor club data (face closure/path mainly). I tried on a garmin r10 twice but just wasn’t happy with the club data and too many misread spins (low spin readings and nuked knuckleballs). Rented out a bay on a trackman and knocked it all out my third attempt. I will say my prescription has me hitting ball heights I never in a million years would have guessed I could touch. I told my buddy I could touch the moon with my new irons after my first time on the range lol. 

I hope your monitor also picks up club data semi accurate as well as ball side spin. That was my first two failed attempts was poor club data (face closure/path mainly). I tried on a garmin r10 twice but just wasn’t happy with the club data and too many misread spins (low spin readings and nuked knuckleballs). Rented out a bay on a trackman and knocked it all out my third attempt. I will say my prescription has me hitting ball heights I never in a million years would have guessed I could touch. I told my buddy I could touch the moon with my new irons after my first time on the range lol. 

Right on. I know Chad and his guys use the mevo+ when they are outdoors, just wanted to reiterate so someone doesn’t make the same mistake as me and have to keep doing the test multiple times over (it’s a pretty hefty test to have to keep repeating lol). I will say the more you hit the Foreward heads the more likely you’ll end up choosing them 😂 (they don’t even pressure you to buy their heads either). The best part is they’ll give you options in certain categories to help cut costs too, like if you fit into a graphite they’ll do their best to give you a steel equivalent (if possible) 

I already like the look and feel off the face with their clubs. They remind me of the Edels but actually have them in left handed. 
The mix of graphite and steel was another thing that I really liked about the system. 
They have some videos on YouTube and Instagram. There was a thread a while back that discussed the brand some but no one at the time had done the fitting. 

Right on. I know Chad and his guys use the mevo+ when they are outdoors, just wanted to reiterate so someone doesn’t make the same mistake as me and have to keep doing the test multiple times over (it’s a pretty hefty test to have to keep repeating lol). I will say the more you hit the Foreward heads the more likely you’ll end up choosing them 😂 (they don’t even pressure you to buy their heads either). The best part is they’ll give you options in certain categories to help cut costs too, like if you fit into a graphite they’ll do their best to give you a steel equivalent (if possible) 

Right on. I know Chad and his guys use the mevo+ when they are outdoors, just wanted to reiterate so someone doesn’t make the same mistake as me and have to keep doing the test multiple times over (it’s a pretty hefty test to have to keep repeating lol). I will say the more you hit the Foreward heads the more likely you’ll end up choosing them 😂 (they don’t even pressure you to buy their heads either). The best part is they’ll give you options in certain categories to help cut costs too, like if you fit into a graphite they’ll do their best to give you a steel equivalent (if possible) 

I hope your monitor also picks up club data semi accurate as well as ball side spin. That was my first two failed attempts was poor club data (face closure/path mainly). I tried on a garmin r10 twice but just wasn’t happy with the club data and too many misread spins (low spin readings and nuked knuckleballs). Rented out a bay on a trackman and knocked it all out my third attempt. I will say my prescription has me hitting ball heights I never in a million years would have guessed I could touch. I told my buddy I could touch the moon with my new irons after my first time on the range lol. 

Thoroughly enjoyed my process with this fitting. I already had an idea on how to do it because I’d watched a few of their live fittings from instagram. I had to do the test 3 times because I goofed the first two times and finally figured it out by the third time, I will say the nicer quality the launch monitor the better the entire process goes. The clubs coming chalky is really on whoever had the case prior to yourself because you’ll likely be shipping them direct to the next person on the list when it comes time to send them off. They bring the clubs back after a certain number of fittings to clean them up and check the swing weight/lie/other things. I just got my irons from my prescription 2 weeks ago and could not be more happy. Chad is a freaking wizard for creating such an awesome product/process and Dan is so chill to work with throughout the entire process. Hope you get dialed in and enjoy your prescription as much as I am enjoying mine 

I hope your monitor also picks up club data semi accurate as well as ball side spin. That was my first two failed attempts was poor club data (face closure/path mainly). I tried on a garmin r10 twice but just wasn’t happy with the club data and too many misread spins (low spin readings and nuked knuckleballs). Rented out a bay on a trackman and knocked it all out my third attempt. I will say my prescription has me hitting ball heights I never in a million years would have guessed I could touch. I told my buddy I could touch the moon with my new irons after my first time on the range lol. 

The mevo+ with pro package and face data give all of that info.  I just took a quick snapshot of the info.