Srixon ZX5 Adjustable hosel

[Sir Putts Alot]

Can someone help me understand the adjustment measurements for the Srixon ZX5 Driver? Please don't send me the chart Srixon has I can't understand it either.

Is this 11 degrees? What would be 12 degrees and 10 degrees?

 

Edited December 14, 2022 by Sir Putts Alot

[edingc]

One clockwise of standard loft will be -0.5 degrees loft (10 degrees total), 1 degree open, no change to lie angle (option 2, highlighted yellow). The only other way to obtain 10 degrees of loft is to go one counter-clockwise of standard loft, which will also result in a 1 degree open face but a 2 degree upright lie angle (option 6, highlighted red)

Looks like loft adjustment only goes to +1 or -1 degrees, so the most you can obtain is 11.5 degrees of loft.

Going to 11.5 degrees is doable by:

- Moving the loft sleeve to the +1 loft position, which will close the face 2 degrees and go 1 degree upright in lie angle (option 10, purple highlight).
- Moving the loft sleeve to one position counter-clockwise to the standard +1 position (option 9, orange highlight) which result in 11.5 degrees of loft, close the face 1.5 degrees and go 1.5 degrees upright. 
- Moving the loft sleeve to one position clockwise to the standard +1 position (option 11, green highlight) which result in 11.5 degrees of loft, close the face 1.5 degrees and go 1.5 degrees upright. 

EDIT: To clarify, when I say clockwise, I mean to the right, counter-clockwise to the left. I'm referring to the position of the marks and not the way you would rotate the shaft.

[Sir Putts Alot]

I see now edingc. It was throwing me off thinking that I had 2 degrees of loft to work with but now that I see it this way it is crystal clear. Must be too much stress at work haha  thank you

Edited December 14, 2022 by Sir Putts Alot