GolfSub70

Good morning! Yeah a 749 iron model is in production. I believe that will be an April or May release. I don't have anything else to share on that at this point but it'll be similar to our 739 model that we had years ago but with some improvements. Graphite demo for the 749? I'm not sure yet. There may be a graphite senior and/or regular flex option. We've done that for some models in the past.

Thanks for the message. I know we are working on getting demos put together. They may roll out at different times depending on order volume and head inventory...we just want to make sure customer orders get fulfilled before pulling heads to build the demos. The 699 v2 demo should be doable shortly. The 699 Pro v2 may be slightly behind but I know it's a priority to get those together. As far as whether these would be a good fit based on swing speed. I swing driver around 108...6 iron is typically around 90. I'm a low single digit and could definitely game the new 699 v2 models and am considering ordering a set myself. While the higher swing speed players may not NEED this type of club, there are still some noteworthy advantages depending on what you are looking for. I play the 659 TC now and only get maybe half a club more distance out of the new 699s than the 659s. Someone who swings their 6 iron under 85mph is going to see a bigger distance gain between the two options due to the increased launch and efficiency/ball speeds on shots that are slightly mishit. That being said, the new 699s are much more forgiving. From my experience the mishits on the new 699 irons are only going to lose 3-7 yards of carry distance as opposed to my 659s which I can lose anywhere from 10-15+ yards depending on the club. The left to right dispersion has been a lot better for me too. I can move the new 699 models either direction but they are far less likely to go WAY left or WAY right. Ultimately I think it boils down to what the player needs and there will be plenty of people who swing their driver at 105+ mph that still have far more consistency with the new 699s then they would with a forged players iron

This is fantastic @GolfSpy_APH. Thank you for sharing these!

Speaking from personal experience...I don't know if the actual delivery drivers are scanning packages early and in bulk so that they can just run them up to the door and move on to the next one or what, but I've had deliveries from UPS and USPS do the same thing. It says delivered and then shows up hours later or even the next day. It's pretty strange and I don't remember it happening years ago. Glad it got there though and I hope you enjoy whatever you got!

That is true. We have generally asked people to try and have them heading back our way in 10-14 days...but there's really no firm timeline on it and we're happy to extend it if people think they need more time to get what they need from the demo process

Diamond Tour and Sub 70 are under the same umbrella but they operate differently. Sub 70 is not a "clone assembler"...although that sounds like a slightly terrifying but interesting future job.

Awesome! Thanks for signing up. Yeah we'll either have the full fitting cart setup or at the very least a bunch of demos and different options for people to hit beforehand. I'm sure we'll have the 659s there for everybody.

Shameless marketing but if anyone lives in the Chicago area and wants to come out for a good day of golf, food, drinks, prizes, giveaways, etc., we are having an outing at Prairie Landing on 8/5. More info can be found at https://www.golfsub70.com/sub-70-golf-outing.html

Thanks @ejgaudette! All very good points. If you get fit locally we can certainly build something using those specs. We should have or be able to get whatever you need from a grip, shaft and specs (loft/lie, swing weight, etc) standpoint. We would just use a head that is a similar model to whatever you hit best. We have 10 iron models at the moment, two hybrids (soon to be three), two wedges (soon to be four), 10 putters, two drivers, etc...so there is likely an option in the Sub 70 lineup similar to any popular option out there at this point. We can always discuss over the phone, by email or through our website chat system as well. We'll do everything we can to get you exactly what you need. If you ever have any questions just let us know. Thank you!

I believe they're planned for June at the moment

I will absolutely let Kevin know the next time I see him. Thanks for coming out and visiting us!

We do have a fitting cart in Creedmoor, NC just north of Durham as well. You may be able to set something up over there if necessary. You can find the fitting cart locations at https://www.golfsub70.com/sub-70-fitting-cart-locations/ Jason is VERY good at getting the right options/specs out to people even when it's over the phone though so hopefully you're good to go. If not, we'll help figure it out. Thanks!

That's awesome. Congratulations! The bag setup might be a little different but it all comes down to whatever works. I've played with plenty of really high level players that rarely hit driver...all just comes down to what works best for you.

Definitely. Reach out to Cody. Typically when a new product comes out we wait a little bit before getting it into the demo program. With inventory shortages/delays this year due to COVID, we just want to make sure we can fulfill orders before pulling heads to build demo sets. That being said, he may be able to get a couple out to you or at least give you an idea of when they might be available through the demo program. Thank you!

No problem at all. Thank you!

Feel free to email [email protected] on any demo questions. He handles pretty much everything demo related and may know when certain options will be available again etc. Thanks!

We could have submitted them but both the 939X and Pro models have been tested already. We didn't want to resubmit the same products and sacrifice inventory that could get out to a customer instead. The Pro model was named Best Value https://mygolfspy.com/2019-most-wanted-fairway-wood/ If we had a new model available we would have submitted it...I'm sure our new fairways will be in the 2022 testing.

If you have any questions on shaft options just let us know!

If you give us a call we'll be more than happy to go through everything and try to make a recommendation. Our customer support team does that kind of stuff all day and can offer their insights

I think most people have seen a 300-400rpm reduction in backspin with the Pro model

I really can't offer much on that front. I haven't personally compared it to any other specific OEM drivers. We do a lot of testing and I'm sure someone at some point ran numbers against some other options...but I haven't seen anything on that. We'll let customers and third parties validate the performance. I wouldn't expect you to take me seriously if I told you it is very forgiving. Obviously I'm a little biased. Our 849D model will be the more forgiving option of the two though. This one is going to be lower launching and more fade biased.

+/- 2 degrees

Thanks! We should have a much bigger batch available in early July.

Here is what is in our drop down menu. However, we have a lot of other options so feel free to contact us if you don't see what you want/need... UST dRVR Graphite Senior Sub 70 Project X High Launch 4.5 Graphite UST PROFORCE V2 White/Yellow 5F2 Graphite UST PROFORCE V2 HL Silver/Red 5F2 Graphite Regular Project X Evenflow Riptide 50 5.5 Graphite Project X Evenflow Riptide 60 5.5 Graphite Sub 70 Project X High Launch 5.5 Graphite Project X HZRDUS Smoke Black 60 5.5 Graphite UST PROFORCE V2 Black 6F3 Graphite Aldila NV NXT 65 Graphite Aldila NVS NXT 65 Graphite Mitsubishi TENSEI AV RAW BLUE 65 R Fujikura Pro 2.0 5R Graphite Fujikura Ventus Red 6 Graphite Graphite Design Tour AD DI-5 Graphite Stiff Project X Evenflow Riptide 50 6.0 Sub 70 Project X High Launch 6.0 Graphite Project X Evenflow Riptide 60 6.0 Project X Evenflow Riptide 70 6.0 Project X HZRDUS Smoke Black 60 6.0 Project X HZRDUS Smoke Black 70 6.0 UST PROFORCE V2 Black 6F4 Graphite Aldila NV NXT 65 Graphite Fujikura Pro 2.0 6S Graphite Mitsubishi TENSEI AV RAW WHITE 65 S Mitsubishi TENSEI AV RAW BLUE 65 S Fujikura Ventus Red 6 Graphite Fujikura Ventus Blue 6 Graphite Fujikura Ventus Black 6 Graphite Graphite Design Tour AD DI-6 Graphite Graphite Design Tour AD TP-6 Graphite XS Project X HZRDUS Smoke Black 60 6.5 Project X HZRDUS Smoke Black 70 6.5 Project X Evenflow Riptide 60 6.5 Project X Evenflow Riptide 70 6.5 UST PROFORCE V2 Black 6F5 Graphite Aldila NV NXT 65 Graphite Mitsubishi TENSEI AV RAW BLUE 65 X Mitsubishi TENSEI AV RAW WHITE 65 X Fujikura Pro 2.0 7X Graphite Fujikura Ventus Blue 6 Graphite Fujikura Ventus Black 6 Graphite Graphite Design Tour AD DI-6 Graphite Graphite Design Tour AD TP-6 Graphite

Thanks for the message! We will have some by the end of the month so keep an eye out. The first batch may go relatively quickly...but we'll have more ready in early July as well.