Super Tuna Posted June 25, 2012 Share Posted June 25, 2012 Afternoon Gents, I've been eyebaling far too many numbers today and have gone cross eyed. KBS Tours in stiff is 6.1 FM I believe. DG S300's are 5.8 correct? Ergo to get the same flex, one would soft step a KBS Tour Stiff and hit the same 5.8 with the .3 change per stepping alteration. Ignoring the fact that KBS Tour's tend to feel softer then they are due to the design. Alternatively one could go with R+ in the C Tapers straight in to get the 5.8 rating. Just curious as I've been mucking about with iron shafts recently and it seems the 5.7-5.9 is really the spot for me in iron flex with my tempo now. That and I didn't really give C Tapers a fair shake against the DG's since the rest of that order was botched beyond belief. While I'm on it, why aren't more OEM's jumping on the +'s from KBS. Seems like Cobra is the only one that's jumped on board so far, or at least from their custom options PDF. I laught at your claims to fight a zombie apocalypse when most of you can't stand up to a Spider Link to comment Share on other sites More sharing options...
RookieBlue7 Posted June 26, 2012 Share Posted June 26, 2012 KBS Stiff frequency at 6.0. Dynamic Gold Stiff frequencies at 5.8. The proper way to get to the exact same frequency is to hard step KBS Tour Regular+ one time, that takes them from 5.5 to 5.8. Going stiff softstepped would take them down to 5.7. The R+ C-Tapers normal frequency is 5.7, C-Taper stiff softstepped once would get you to 5.9. When I get a chance, I'll compile a spreadsheet with frequencies for steel and post it. In The BagDriver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400 SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold SpinnerLW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold SpinnerXW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger steppedPutter: Nike Method Prototype 006 at 34"Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo. Link to comment Share on other sites More sharing options...
JMiller Posted June 26, 2012 Share Posted June 26, 2012 I had this sitting in a different post it is a starting point. I have KBS listed on how they feel not what they are listed at you can look up on their website what the listing says they will FCM at standard. hs = hard stepped, ss = soft stepped DGS300ss = 5.5FCM DGS300 = 5.8FCM DGS300hs = 6.1FCM PX5.5ss = 5.8FCM PX5.5 = 6.0FCM PX5.5hs = 6.2FCM PX6.0ss = 6.3FCM PX6.0 = 6.5FCM PX6.0hs = 6.7FCM DGX100ssx2 = 6.2FCM DGX100ss = 6.5FCM DGX100 = 6.8FCM DGX100hs = 7.1FCM PX 6.5ss = 6.7FCM PX 6.5 = 7.0FCM PX 6.5hs = 7.2FCM KBS Tour Xss = 6.5FCM KBS Tour X = 6.7FCM KBS Tour Xhs = 7.0FCM KBS CT Xss = 6.6FCM KBS CT X = 6.8FCM KBS CT Xhs = 7.1FCM Callaway Epic Max 12.0 (-1/N) @ 44.50" w/ Graphite Design Tour AD IZ-7 Stiff Callaway Epic Speed 18.0* @ 42.75" w/ Graphite Design Tour AD IZ-8 Stiff Callaway Mavrik Pro 23.0* @ 40.00" w/ Graphite Design Tour AD IZ 95 HYB Stiff Sub-70 639 Combo (5-P) w/ Nippon Modus 3 125 Stiff, Standard Length, Weak Lofts (27-47, 4* gaps) Callaway MD5 Raw 51-11 S-Grind w/ Nippon Modus 125 Wedge Callaway MD5 Raw 55-13 X-Grind w/ Nippon Modus 125 Wedge Callaway MD5 Raw 59-11 S-Grind w/ Nippon Modus 125 Wedge Callaway MD5 Raw 63-09 C-Grind w/ Nippon Modus 125 Wedge Golf Swing & Putting -- Bruce Rearick (Burnt Edges Consulting) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.