Jump to content
Testers Wanted: Newton Driver Shafts ×

Swing Weight Scale Option


Recommended Posts

I plan on picking up a swing weight scale once I get my work bench all built up. I was just going to grab the $100 Golfworks scale, but ran across another option that I'm curious about.

Does anyone have any experience with the SwingW.com scale - Simple Swingweight System XL V3 (https://swingw.com/shop/p/simple-swingweight-xl-tpcek-zblbs)?

It's half the price and has a holder for a loose grip. I have the scale that's required, but I'm just curious if this is worth the price knowing you have to do some "work" to set it up compared to the GW scale that's just ready to go.

I wasn't going to grab one right away, but after finding out the SW I calculated using the fulcrum/weight method came out very different than my local pro found after he adjusted loft/lie on my irons using his GW scale, I think I'd rather err on the side of getting it right from the start versus potentially guessing and it not being correct.

Let me know your experience and thoughts.

Driver: :mizuno-small: STMax 230 10.5*, Stiff :projectx: HZRDUS Smoke Blue RDX, 60g
Fairways: :Sub70: 949x 3w / 5w, 15* / 18*, Stiff :projectx: HZRDUS Smoke Red RDX, 70g
Hybrids: :Sub70: 939x 4h, 21*, Stiff :projectx: HZRDUS Smoke Red RDX, 80g Hybrid
Irons: :mizuno-small: JPX923 Hot Metal Pro, 5-GW, UST Mamiya Recoil 95 F4
Wedges: :mizuno-small: S23, 54* & 60*, UST Mamiya Recoil 95 F4
Putter:
Maltby_Logo.jpg.7f7f2f102dcb7b289e419805910e4aab.jpg Moment X Tour @ 35" & 71*, Super Stroke Pistol GT 2.0, White/Red
Ball: :maxfli: Tour CG
Technology:
VortexGolf_Logo.jpg.2ad1215c7b1aa2ccf8d062a73bc72142.jpg Anarch Rangefinder, :ShotScope: V5 w/ Tags Shot Tracking.

https://forum.mygolfspy.com/topic/65161-vortex-optics-rangefinders-2024-member-test/?do=findComment&comment=1089247

https://forum.mygolfspy.com/classifieds/ - DON'T FORGET ABOUT THE CLASSIFIEDS!!!!

Link to comment
Share on other sites

From my experience, second guessing what the SW scale was telling me was the driving factor in me upgrading from an old golfsmith SW scale.  I would say you should get the best scale your budget allows or  you might end up in a similar boat where you don't trust the numbers you are seeing

Link to comment
Share on other sites

On 4/11/2024 at 10:21 AM, Shrek74 said:

I plan on picking up a swing weight scale once I get my work bench all built up. I was just going to grab the $100 Golfworks scale, but ran across another option that I'm curious about.

Does anyone have any experience with the SwingW.com scale - Simple Swingweight System XL V3 (https://swingw.com/shop/p/simple-swingweight-xl-tpcek-zblbs)?

It's half the price and has a holder for a loose grip. I have the scale that's required, but I'm just curious if this is worth the price knowing you have to do some "work" to set it up compared to the GW scale that's just ready to go.

I wasn't going to grab one right away, but after finding out the SW I calculated using the fulcrum/weight method came out very different than my local pro found after he adjusted loft/lie on my irons using his GW scale, I think I'd rather err on the side of getting it right from the start versus potentially guessing and it not being correct.

Let me know your experience and thoughts.

I am in the same boat @Shrek74.  What did you determine?

Working at getting better ... and very slowly getting there.

  •  :callaway-small: Paradym 🔹🔹🔹 8* (:accra:  Shogun Blue M0 Otto-Phlex)
  •  :taylormade-small: Brnr Mini driver 13.5* (:accra: FX 3.0 140 M1 Otto-Phlex)
  • :callaway-small: Paradym X 4 and 5 Hybrids
  •  Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts:  :projectx: LZ 6.0)
  • :cleveland-small: RTX6 Zipcore 53*, and 58* mid wedges (:projectx: wedge shafts 6.5)
  • :L.A.B.: DF 2.1 (BTG shaft)
  • :redrooster: Gloves

My Official 2024 TaylorMade Qi10 Review:  https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200

My Official 2023 Red Rooster Sussex Glove Review:  https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042

 

Link to comment
Share on other sites

6 minutes ago, IndyBonzo said:

I am in the same boat @Shrek74.  What did you determine?

I will eventually pick up one of the GolfWorks scales. I feel going that route just takes away all the variables. Ensure it's level and go.

Driver: :mizuno-small: STMax 230 10.5*, Stiff :projectx: HZRDUS Smoke Blue RDX, 60g
Fairways: :Sub70: 949x 3w / 5w, 15* / 18*, Stiff :projectx: HZRDUS Smoke Red RDX, 70g
Hybrids: :Sub70: 939x 4h, 21*, Stiff :projectx: HZRDUS Smoke Red RDX, 80g Hybrid
Irons: :mizuno-small: JPX923 Hot Metal Pro, 5-GW, UST Mamiya Recoil 95 F4
Wedges: :mizuno-small: S23, 54* & 60*, UST Mamiya Recoil 95 F4
Putter:
Maltby_Logo.jpg.7f7f2f102dcb7b289e419805910e4aab.jpg Moment X Tour @ 35" & 71*, Super Stroke Pistol GT 2.0, White/Red
Ball: :maxfli: Tour CG
Technology:
VortexGolf_Logo.jpg.2ad1215c7b1aa2ccf8d062a73bc72142.jpg Anarch Rangefinder, :ShotScope: V5 w/ Tags Shot Tracking.

https://forum.mygolfspy.com/topic/65161-vortex-optics-rangefinders-2024-member-test/?do=findComment&comment=1089247

https://forum.mygolfspy.com/classifieds/ - DON'T FORGET ABOUT THE CLASSIFIEDS!!!!

Link to comment
Share on other sites

11 minutes ago, Shrek74 said:

I will eventually pick up one of the GolfWorks scales. I feel going that route just takes away all the variables. Ensure it's level and go.

Sounds good.  I will likely do the same. Thank you.  

Working at getting better ... and very slowly getting there.

  •  :callaway-small: Paradym 🔹🔹🔹 8* (:accra:  Shogun Blue M0 Otto-Phlex)
  •  :taylormade-small: Brnr Mini driver 13.5* (:accra: FX 3.0 140 M1 Otto-Phlex)
  • :callaway-small: Paradym X 4 and 5 Hybrids
  •  Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts:  :projectx: LZ 6.0)
  • :cleveland-small: RTX6 Zipcore 53*, and 58* mid wedges (:projectx: wedge shafts 6.5)
  • :L.A.B.: DF 2.1 (BTG shaft)
  • :redrooster: Gloves

My Official 2024 TaylorMade Qi10 Review:  https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200

My Official 2023 Red Rooster Sussex Glove Review:  https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...