WisecrackWard Posted April 27 Share Posted April 27 Has anybody swing these clubs? Can anybody give me any advice concerning them? I'm in the market for a new set of irons and I really love these two brands from what I can see online but it's a little harder to find stuff about them online. Found on vid review of Toura and it seems good. One written of AR and it was positive too. But if there's anyone out there with more info on them I'd.love to hear thoughts! I know there was recently a tester spot for Toura MB irons on here (I signed up wishfully) but I haven't seen anything come.of that yet. Quote Taylor Made M4 Ping i10s 10 handicap Link to comment
GolfSpy_APH Posted April 27 Share Posted April 27 As someone who has indirectly worked with both through the forum I would lean Toura. I have also played their wedges and really liked them. Both will be great and offer quality products. Argolf is a fairly premium brand and Toura is as well just on a different spectrum with very simple looking clubs. buckpillar, TJ Hall and bama no 1 3 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment
Josh Parker Posted April 27 Share Posted April 27 I just got done building a set of Toura irons. Link below for my thread on the build. The irons are clean and if you are right handed have a few more options with irons. HERE WisecrackWard, bama no 1 and TJ Hall 2 1 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment
BobTheClubBuilder Posted April 27 Share Posted April 27 I have not hit or built any of their clubs. Really hoping to get my hands on them and see their QC quality. WisecrackWard and TJ Hall 2 Quote Everything breaks towards the valley Link to comment
WisecrackWard Posted April 27 Author Share Posted April 27 1 hour ago, GolfSpy_APH said: As someone who has indirectly worked with both through the forum I would lean Toura. I have also played their wedges and really liked them. Both will be great and offer quality products. Argolf is a fairly premium brand and Toura is as well just on a different spectrum with very simple looking clubs. Thank you! I greatly appreciate your response. I was leaning Toura anyway because I like the look better, but I like that I can add length and do loft and lie on Argolf so I wanted some opinions Quote Taylor Made M4 Ping i10s 10 handicap Link to comment
GolfSpy_APH Posted April 27 Share Posted April 27 Send an email to Toura and they can probably work something out for you. They are a great small company in my opinion. TJ Hall 1 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment
WisecrackWard Posted April 27 Author Share Posted April 27 57 minutes ago, GolfSpy_APH said: Send an email to Toura and they can probably work something out for you. They are a great small company in my opinion. Ok, I for sure will. I want to go get a fitting but I don't want to buy any clubs from the big manufacturers. Wanna super a smaller company. Byrdie told me they could. I feel like if they can Toura can TJ Hall 1 Quote Taylor Made M4 Ping i10s 10 handicap Link to comment
GolfSpy_APH Posted April 27 Share Posted April 27 10 minutes ago, WisecrackWard said: Ok, I for sure will. I want to go get a fitting but I don't want to buy any clubs from the big manufacturers. Wanna super a smaller company. Byrdie told me they could. I feel like if they can Toura can Sub70 is another one, altho a little bigger. They do have fittings available. Tough with the small shop places. Haywood would be another one worth checking out. haywoodgolf and TJ Hall 2 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment
Pep Posted April 27 Share Posted April 27 I've never built irons is this a daunting task? Quote Chris poepping Professional ski Instructor, trainer and coach Link to comment
GolfSpy_APH Posted April 27 Share Posted April 27 8 minutes ago, Pep said: I've never built irons is this a daunting task? https://mygolfspy.com/news-opinion/how-to-build-a-golf-club/ I actually wrote a full step by step guide. Check it out. Biggest thing is take alittle time and planning. Read the guide, watch a few video sand it isn't too difficult! Pep and TJ Hall 1 1 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment
Josh Parker Posted April 27 Share Posted April 27 2 hours ago, Pep said: I've never built irons is this a daunting task? Check out my thread above but it was easier than I thought it would be. Take your time and measure twice/cut once mentality and it wasn't bad. Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment
WisecrackWard Posted April 27 Author Share Posted April 27 3 hours ago, GolfSpy_APH said: Sub70 is another one, altho a little bigger. They do have fittings available. Tough with the small shop places. Haywood would be another one worth checking out. Oh for sure. I've looked into Haywood and Wishon and Byrdie and Lynx and Ram and Macgregor, Stix, Sub70, Maltby and lots of others. I was hard on Haywood for a bit. Love the looks of their clubs. Inesis was one I was really looking at too for a bit. As of now I'm just really feeling Toura and Argolf haywoodgolf and Josh Parker 1 1 Quote Taylor Made M4 Ping i10s 10 handicap Link to comment
Josh Parker Posted April 27 Share Posted April 27 2 minutes ago, WisecrackWard said: Oh for sure. I've looked into Haywood and Wishon and Byrdie and Lynx and Ram and Macgregor, Stix, Sub70, Maltby and lots of others. I was hard on Haywood for a bit. Love the looks of their clubs. Inesis was one I was really looking at too for a bit. As of now I'm just really feeling Toura and Argolf They feel great off the face. I wish they would have had a CB for lefty so I could have mixed the bag, but they do in right handed. Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment
WisecrackWard Posted April 27 Author Share Posted April 27 Just now, Josh Parker said: They feel great off the face. I wish they would have had a CB for lefty so I could have mixed the bag, but they do in right handed. The Toura feel good off the face? I haven't gone back to look at your post yet gonna read through that though when I get a moments break from my busy opening day for baseball with my kiddo Josh Parker 1 Quote Taylor Made M4 Ping i10s 10 handicap Link to comment
WisecrackWard Posted April 28 Author Share Posted April 28 7 hours ago, Josh Parker said: I just got done building a set of Toura irons. Link below for my thread on the build. The irons are clean and if you are right handed have a few more options with irons. HERE Bro, I just read through all 5 pages of your build! Your clubs turned out freaking amazing! Not gonna lie though it intimidated me a little about building my own. Swing weight calculator? What is that and how do I use it? Will I screw up putting on the ferrules? Probably. But for sure the Toura clubs look absolutely stellar. I LOVE how well packaged they were and you saying they looked better in person than even on the website has me even more pumped for them. They are definitely #1 on the list for me at the moment. I know it hasn't been too long, but how's the graphic on the face holding up? Quote Taylor Made M4 Ping i10s 10 handicap Link to comment
Josh Parker Posted April 28 Share Posted April 28 10 minutes ago, WisecrackWard said: Bro, I just read through all 5 pages of your build! Your clubs turned out freaking amazing! Not gonna lie though it intimidated me a little about building my own. Swing weight calculator? What is that and how do I use it? Will I screw up putting on the ferrules? Probably. But for sure the Toura clubs look absolutely stellar. I LOVE how well packaged they were and you saying they looked better in person than even on the website has me even more pumped for them. They are definitely #1 on the list for me at the moment. I know it hasn't been too long, but how's the graphic on the face holding up? SW calculator was easy to use and keeps clubs close to the same weight throughout the bag. So far the faces have held up great but I also don't have a ton of rounds on them. They will build them with limited shaft options WisecrackWard 1 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.