Choeppner Posted October 4, 2012 Author Share Posted October 4, 2012 Hey Guys, I hope everyone is having a great day! I wanted to share some pics with you of a Custom 303 Stainless Single Tine Green Repair Tool that was just completed for a customer This Green Repair Tool was milled from a solid billet of 303 Stainless. The Medallion is a Custom Black Ash Burl MACHINE Logo Medallion. I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 5, 2012 Author Share Posted October 5, 2012 Hey Guys, I hope everyone is having a great week! I wanted to share some pictures with you of a Custom MACHINE that was just completed for a Customer This MACHINE Features a 303 Stainless M2A Converter Head with a 303 Stainless Fat Back Nibble Back Flange and a Stubby Plumber Neck. The Medallion is an Alloy Logo Medallion. This Customer also ordered an Additional 303 Stainless Fat Back Flange. Dave applied a Custom Satin Torch Finish on the Head, Neck and Both Flanges I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 7, 2012 Author Share Posted October 7, 2012 Hey Guys, I hope everyone is having a great weekend I wanted to share some pics with you of a Custom MACHINE that was just finished for a customer. This MACHINE features a 303 Stainless M10 Fixer Head with a 303 Stainless Stubby Plumber Neck. The Medallion on this MACHINE is a Black Anodized Alloy Medallion. I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
fozcycle Posted October 8, 2012 Share Posted October 8, 2012 I like the "dot" on the top of the face.......and I like the line or groove on the rear flange.......When you put both together on the same putter, it provides a vertical sightline to ensure that your head is directly over the putter when addressing the ball..... Driver: 0311 XF 10.5* w/Project X Cypher 40 gram Senior shaft or 0811 XF 12* w/Evenflo Riptide CB Senior shaft Fairways: 0211 5W & 7W w/ Evenflo Riptide CB regular shaft and Tour Edge E521 9W w/Fubuki HD50 regular shaft Hybrid: None in bag at the moment Irons: Titleist T300 5-PW w/Fubuki MV Senior graphite shafts w/Golf Pride Tour Wedges: Edison forged 49*, 53* and 57* wedges with KB PGI Senior shafts(80 grm). Putter: 33” Evnroll ER6R or ER2 or Bellum Winmore Model 707, or Nike Method Core Drone w/Evnroll Gravity Grip Bag: Vice cart bag(Black/Lime). Ball: Snell MTB Prime X, Maxfli Tour/S/X CG, Titleist Pro V1x or Titleist TruFeel Using Shot Scope X5 and Pinned Rangefinder Link to comment Share on other sites More sharing options...
Choeppner Posted October 9, 2012 Author Share Posted October 9, 2012 Thanks MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 9, 2012 Author Share Posted October 9, 2012 Hey Guys, I hope everyone had a GREAT Holiday Weekend. I wanted to share some pictures with you of a Custom Tour Issue MACHINE that is headed to it's new owner This MACHINE features a Custom Aluminum Bronze M10 Fixer head with a 303 Stainless Plumber Neck and a Aluminum Bronze Medallion. The Head and Medallion have been given a Custom Patina Finish I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 9, 2012 Author Share Posted October 9, 2012 Hey Guys, I hope everyone is having a great week! I wanted to share with your a MACHINE Custom Work In Progress. This MACHINE Features a 303 Stainless M2A Converter Head with a Hand Rolled Topline, a 303 Stainless Deep Bite Bongo Back Flange and a 303 Stainless Dot Pill Cut Plumber Neck. Next up for this MACHINE is for it to receive a Custom Torch Finish I look forward to hearing your thoughts Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
RookieBlue7 Posted October 10, 2012 Share Posted October 10, 2012 Chris, You got any more pics of the protos that Dave dug out to sell with the raised CG/upside down almost Aserta like design? I saw 3 pics but was hoping to see more, and maybe one with the CS modular hosel in it lol. In The BagDriver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400 SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold SpinnerLW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold SpinnerXW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger steppedPutter: Nike Method Prototype 006 at 34"Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo. Link to comment Share on other sites More sharing options...
Super Tuna Posted October 11, 2012 Share Posted October 11, 2012 Hey Guys, I hope everyone is having a great week! I wanted to share some pics of another Custom MACHINE Putter that was completed for a Customer This MACHINE Features a 303 Stainless Head with a 303 Stainless Blade Back Flange and a 303 Stainless Stubby Plumber Neck Hosel. Dave has Melted all the edges on this MACHINE to give the whole putter a smoother, more rounded look The finish on this MACHINE is our Custom Blue Flame Torch Finish I look forward to hearing your thoughts! Thanks in advance -Chris Righty then. I don't know how I missed this one but WOW. By far, this is my favorite Machine has done to date by a long shot. The blue and the smoother look just really sets it off. Long plumber neck, sufficient head weight and some blue paint fill in the Machine logo. MMMMM. Add a Black shaft and a Blue Iomic grip to finish it off. Yeah. I think I might need to email you guys... I laught at your claims to fight a zombie apocalypse when most of you can't stand up to a Spider Link to comment Share on other sites More sharing options...
Choeppner Posted October 11, 2012 Author Share Posted October 11, 2012 Chris, You got any more pics of the protos that Dave dug out to sell with the raised CG/upside down almost Aserta like design? I saw 3 pics but was hoping to see more, and maybe one with the CS modular hosel in it lol. Hey I do have pics with that hosel Trying to post them Thanks Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 11, 2012 Author Share Posted October 11, 2012 Righty then. I don't know how I missed this one but WOW. By far, this is my favorite Machine has done to date by a long shot. The blue and the smoother look just really sets it off. Long plumber neck, sufficient head weight and some blue paint fill in the Machine logo. MMMMM. Add a Black shaft and a Blue Iomic grip to finish it off. Yeah. I think I might need to email you guys... Thanks We can definitely do that If i can help, please let me know Thanks Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Super Tuna Posted October 11, 2012 Share Posted October 11, 2012 Thanks We can definitely do that If i can help, please let me know Thanks Chris Cheers Chris! I'll fire you off an email tomorrow when I can escape my meetings for some plotting. I laught at your claims to fight a zombie apocalypse when most of you can't stand up to a Spider Link to comment Share on other sites More sharing options...
Choeppner Posted October 11, 2012 Author Share Posted October 11, 2012 Sounds like a plan :)I. I look forward to working with you MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Super Tuna Posted October 11, 2012 Share Posted October 11, 2012 Email sent! Need to pass it through She Who Must Be Obeyed but shouldn't be an issue. I laught at your claims to fight a zombie apocalypse when most of you can't stand up to a Spider Link to comment Share on other sites More sharing options...
Choeppner Posted October 11, 2012 Author Share Posted October 11, 2012 Hello, Got it and working on my response You always have to keep She Who Must Be Obeyed Happy. LOL Thanks -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 11, 2012 Author Share Posted October 11, 2012 Hey Guys, I hope everyone is having a great week! I wanted to share with you a Custom MACHINE Work In Progress. This MACHINE Features a Billet Copper 5.0 M2A Converter Head with a 1018 Carbon Modular Center Shaft- Shaft Over Hosel, a Black Delrin Spacer and a 1018 Carbon Deep Bite Bongo Back Flange with Custom Ball Nosed Pill Cuts. This MACHINE still needs more Hand Work and Softening on the Deep Bite Bongo Back Flange and more Hand Grinding and Shaping on the Fat Back Nibble Back Flange. Once the Hand Work is completed both Flanges and the Neck will be receiving our Hot Salts Gun Metal Blue Finish I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 12, 2012 Author Share Posted October 12, 2012 Chris, You got any more pics of the protos that Dave dug out to sell with the raised CG/upside down almost Aserta like design? I saw 3 pics but was hoping to see more, and maybe one with the CS modular hosel in it lol. Sorry for the delay in getting these posted. Please let me know if these help We still have a very few number of these left Even one in Left Handed with a Sight Line Thanks -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 15, 2012 Author Share Posted October 15, 2012 Hey Guys, I hope everyone had a great weekend. I wanted to share some Work In Progress Photo's with you This MACHINE features a Custom Left Handed 303 Stainless M1A Fixer with an Alloy Medallion and a Shaft Over Stub Hosel for a Double Bend Shaft. The head has been finished in a Custom Torch Finish I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 16, 2012 Author Share Posted October 16, 2012 Hey Guys, I hope everyone had a great Monday! I wanted to share some pics of a Custom MACHINE Work In Progress. This MACHINE features a Custom Left Handed 1018 Carbon M10 Mini Head with a 1018 Carbon Mini Modular Center Shaft Hosel. The Face Milling on this MACHINE is our Thread Milled Grooves Face Milling. Next up for this MACHINE is for it to receive a Custom Nickel Plate Finish I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 17, 2012 Author Share Posted October 17, 2012 Hey Guys, I hope everyone is having a great week! I wanted to share with you some pictures of a Custom MACHINE that was just finished for a Customer. This MACHINE features a Billet Copper M1A Adjuster Head with a 303 Stainless Modular Center Shaft - Shaft Over Hosel, a Blue Anodized Alloy Medallion and a 303 Stainless Arch Balanced Heel Closer Weight. In the Foreground of these photo's you can see an additional Tungsten Closer Weight that the customer can use to give this MACHINE a more Heel Down Toe Hang. The Face Milling on this MACHINE is our Thread Milled Groove Face Milling. I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 18, 2012 Author Share Posted October 18, 2012 Hey Guys, I hope everyone is having a great week! I wanted to share some pics with you of a custom MACHINE that was recently completed for a customer. This MACHINE features a Custom 303 Stainless M4 Meritage Head with a Custom Hand Rolled Topline, a 303 Stainless Deep Bite Bongo Back Flange and a 303 Stainless Dot Pill Cut Plumber Neck. The Finish on this MACHINE is a Custom Torch Finish. I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 18, 2012 Author Share Posted October 18, 2012 Hey Guys, I hope everyone is having a great week. I wanted to share some Work in Progress photo's with you of a Custom MACHINE M10 Adjuster. This MACHINE features a Custom Aluminum Bronze M10 Adjuster Head with a Retro Pill Cut Cavity, a Aluminum Bronze 1/2 Offset Plumber Neck and Custom Fly Milled Face Milling. Next up for this MACHINE is for it to be finished in an Antique Pre-Worn Patina Finish. Still more work to go, but she's almost complete. I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 22, 2012 Author Share Posted October 22, 2012 Hey Guys, I hope everyone had a great weekend. I wanted to share with you some pictures of a Custom MACHINE Garage Work In Progress. This MACHINE Garage features a Custom 303 Stainless M10 Fixer Head with a retro thick face cavity and a 303 Stainless Round Hand Bent Hosel. Next up for this MACHINE is for the neck to be cleaned up and the bending marks removed. Once the neck has been finished it will be Tig Welded to the head. Still more work to go, but she is coming along nicely. I look forward to hearing your thought! Thanks in advance, Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 25, 2012 Author Share Posted October 25, 2012 Hey Guys, I hope everyone is having a great week! I wanted to share some updated Work In Progress Photo's of the Custom MACHINE Garage M10 Fixer shown a few days ago. As you can see, the Neck has now been Tig-Welded to the Head, Dave has cleaned up the Neck and the Bead and is now working on the finish. The finish on this MACHINE will be a Custom Torch Finish. Still a little more work to go, but she is coming along nicely. I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 26, 2012 Author Share Posted October 26, 2012 Hey Guys, I hope everyone is having a great week! I wanted to share with you some pictures of a Custom MACHINE that was just completed for a customer. This MACHINE features an Aluminum Bronze M10 Adjuster Head with a Retro Thick Face Cavity and an Aluminum Bronze Half Offset Plumber Neck. The face milling on this MACHINE is a Custom Fly Milled Face Milling. This MACHINE was finished in our Antique Pre-Worn Patina Finish. I look forward to hearing your thoughts! Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 30, 2012 Author Share Posted October 30, 2012 Hey Guys, I am proud to announce a New Custom MACHINE Model for 2013! This MACHINE Model gives you similar convertible flange options you have come to love in the M2A Converter with the Classic “Dale Head†Styling of the MACHINE M10. We are offering a Special Initial Run of 5 MACHINE M20 Converter Prototypes. The Break Down on this MACHINE Offering is as follows: 1 – Prototype MACHINE M20 1 of 1 original South Beach Cut design 2 – MACHINE ART M20 Customs with new modified South Beach Cut 2 – MACHINE Garage M20 Customs with new modified South Beach Cut These prices include your choice of Blade Back, Beefy Back or FatBack flanges, and your choice of any of our existing hosels and logo medallions. Other custom modifications are ala cart. If anyone requires any additional pics of information, please don't hesitate to ask. Thanks to you all for all your support! -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
Choeppner Posted October 31, 2012 Author Share Posted October 31, 2012 Hey Guys, I hope everyone is having a great night! I wanted to share some pics with you of a Custom Hand Made Green Repair Tool that was just completed for a customer. This Damascus Steel Hand Made Green Repair Tool features a Custom Damascus Steel Removeable Ball Mark, a Mokume Medallion and a Custom Torch Finish. I look forward to hearing your thoughts. Thanks in advance -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
hckymeyer Posted October 31, 2012 Share Posted October 31, 2012 That divot repair tool is amazing. Love the way damascus looks. Driver: SLDR w/ Fujikura Ventus Black 3w: '16 M2 hl w/ Diamana D+ 82 5w: Launcher HB w/ HZRDUS Yellow Hybrid: 22 deg. Launcher HB w/ HZRDUS Black Irons: 5i - gap Launcher CBX w/ Nippon Modus 3 125 Wedges: 54 CBX & 58 Zipcore w/ Nippon Modus 3 125 Putter: Red 7s Link to comment Share on other sites More sharing options...
Choeppner Posted October 31, 2012 Author Share Posted October 31, 2012 Thanks! Appreciate the comments -Chris MACHINE Custom Putters Rep Feel free to contact me with any questions at: [email protected] Link to comment Share on other sites More sharing options...
SPY VIP The Dansome Posted October 31, 2012 SPY VIP Share Posted October 31, 2012 wow that divot repair is sexy! Yo #JustPlayBetter Follow @GolfSpyMBP Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.