Popeye64 Posted December 1, 2023 Share Posted December 1, 2023 I stripped My KE4 Max of color too. Im really looking forwards to the KE4 Max review. Very cool of you to set that up. I shot one of my best rounds ever with them today.I'm shocked how much that improved the looks of the KE4MAX heads. Sent from my SM-S908U using Tapatalk Fatshot, KOG and IndyBonzo 3 Quote Link to comment Share on other sites More sharing options...
03trdblack Posted December 1, 2023 Share Posted December 1, 2023 Golfworks has posted the Maltby KE4 TC Pro Driver on their site and said it'll start shipping soon. Minus the alignment dot on the top, the shape at address looks fantastic. snoopy79, Fatshot and IndyBonzo 3 Quote My bag is a revolving door! Link to comment Share on other sites More sharing options...
Popeye64 Posted December 11, 2023 Share Posted December 11, 2023 The TC Pro is an absolute beast. From the sound, feel, and low spin nature. It shocked me with its performance. It's very close in build parameters to the Titleist TSR4. I ran it in a head to head comparison, and the Pro blew it away. Dispersion and control were far better. Sound which is almost hard to believe was just as good if not netter than the TSR4. Feel certainly was. I did also run the TSR3 against it and that head faired far better vs the Pro. The Pro just barely edged it out. Oh and the head cover is very high quality and slick looking. Sent from my SM-S908U using Tapatalk GolfSpy SAM, vandyland, azstu324 and 2 others 3 2 Quote Link to comment Share on other sites More sharing options...
azstu324 Posted December 11, 2023 Author Share Posted December 11, 2023 10 hours ago, Popeye64 said: The TC Pro is an absolute beast. From the sound, feel, and low spin nature. It shocked me with its performance. It's very close in build parameters to the Titleist TSR4. I ran it in a head to head comparison, and the Pro blew it away. Dispersion and control were far better. Sound which is almost hard to believe was just as good if not netter than the TSR4. Feel certainly was. I did also run the TSR3 against it and that head faired far better vs the Pro. The Pro just barely edged it out. Oh and the head cover is very high quality and slick looking. Sent from my SM-S908U using Tapatalk I know it's a total nerd builder observation but an adapter with ribs inside shows an extra level of thought. This thing looks marvelous! IndyBonzo 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
Popeye64 Posted December 11, 2023 Share Posted December 11, 2023 I know it's a total nerd builder observation but an adapter with ribs inside shows an extra level of thought. This thing looks marvelous! The first edition of adapters way back when didn't hold well at all. Then, they adopted the 'threads' style. This version of the adapter has the threads all the way to the top, and they are deep. It gets rid of the plastic ferrule. Overall, the quality of this head is a step up. I would swear it's a Titleist head if it wasn't marked as a Maltby. Sent from my SM-S908U using Tapatalk IndyBonzo, GolfSpy SAM, Fatshot and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
azstu324 Posted December 11, 2023 Author Share Posted December 11, 2023 3 minutes ago, Popeye64 said: The first edition of adapters way back when didn't hold well at all. Then, they adopted the 'threads' style. This version of the adapter has the threads all the way to the top, and they are deep. It gets rid of the plastic ferrule. Overall, the quality of this head is a step up. I would swear it's a Titleist head if it wasn't marked as a Maltby. Sent from my SM-S908U using Tapatalk Most OEM's still haven't gotten this right. You have to run 60 grit around the inside to create some good score lines. Needless to say I'm heavily interested in this one. I just bagged a new Gen 6 PXG 0311XF (only club from PXG I'll play) so this may be slotted for my 2024 driver if all of the reviews and stats come back like yours. GolfSpy SAM and IndyBonzo 2 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
bcancelliere Posted December 12, 2023 Share Posted December 12, 2023 I had no experience with Maltby before ordering clubs. However, a good friend of mine was a club maker and owned a few golf stores. It was at his recommendation that I had the Maltby clubs with forged heads made and they have been a big improvement for me. azstu324 and IndyBonzo 2 Quote Link to comment Share on other sites More sharing options...
GolfSpy SAM Posted December 12, 2023 Share Posted December 12, 2023 On 12/10/2023 at 8:21 PM, Popeye64 said: The TC Pro is an absolute beast. From the sound, feel, and low spin nature. It shocked me with its performance. It's very close in build parameters to the Titleist TSR4. I ran it in a head to head comparison, and the Pro blew it away. Dispersion and control were far better. Sound which is almost hard to believe was just as good if not netter than the TSR4. Feel certainly was. I did also run the TSR3 against it and that head faired far better vs the Pro. The Pro just barely edged it out. Oh and the head cover is very high quality and slick looking. Sent from my SM-S908U using Tapatalk Man - that thing looks pretty phenomenal. What shaft did you order it with? Or did you do head-only? I have an All-Fit adapter on my driver shaft - curious if there's a cog for Maltby drivers, or if I'd have to get a shaft to go with it. I'm in a PXG 0311 XF (Gen 5) currently, and really loving it, but I'm always curious about Maltby's new stuff. IndyBonzo 1 Quote Driver - Callaway Ai Smoke Max - 9* - Draw setting; Maltby UL (Otto Phlex) 5/7 Wood - Takomo Ignis Utility - Caley X01 Driving Iron (3 = 18*) (currently benched) Irons (5-PW) - Caley 01T Wedges (48, 52, 56, 60) - Indi Wedges FLX 48 / ATK 52, 56, 60 Putter - L.A.B. Directed Force 2.1 - 65*/DF3 65* Ball - Chrome Tour Triple-Track Link to comment Share on other sites More sharing options...
03trdblack Posted December 12, 2023 Share Posted December 12, 2023 1 hour ago, GolfSpy SAM said: Man - that thing looks pretty phenomenal. What shaft did you order it with? Or did you do head-only? I have an All-Fit adapter on my driver shaft - curious if there's a cog for Maltby drivers, or if I'd have to get a shaft to go with it. I'm in a PXG 0311 XF (Gen 5) currently, and really loving it, but I'm always curious about Maltby's new stuff. All-fit does make a cog for the Maltby drivers IndyBonzo and Popeye64 2 Quote My bag is a revolving door! Link to comment Share on other sites More sharing options...
Popeye64 Posted December 13, 2023 Share Posted December 13, 2023 Man - that thing looks pretty phenomenal. What shaft did you order it with? Or did you do head-only? I have an All-Fit adapter on my driver shaft - curious if there's a cog for Maltby drivers, or if I'd have to get a shaft to go with it. I'm in a PXG 0311 XF (Gen 5) currently, and really loving it, but I'm always curious about Maltby's new stuff. I ordered head only. I have about 6 shafts with Maltby adapters. Sent from my SM-S908U using Tapatalk All-fit does make a cog for the Maltby drivers Have you hit it yet?Sent from my SM-S908U using Tapatalk IndyBonzo 1 Quote Link to comment Share on other sites More sharing options...
Popeye64 Posted December 13, 2023 Share Posted December 13, 2023 All-fit does make a cog for the Maltby drivers Did you hit it yet?Sent from my SM-S908U using Tapatalk Quote Link to comment Share on other sites More sharing options...
03trdblack Posted December 13, 2023 Share Posted December 13, 2023 Just now, Popeye64 said: Did you hit it yet? Sent from my SM-S908U using Tapatalk Just in my net so far. Sound and feel are phenomenal on this design! IndyBonzo 1 Quote My bag is a revolving door! Link to comment Share on other sites More sharing options...
azstu324 Posted December 13, 2023 Author Share Posted December 13, 2023 5 minutes ago, 03trdblack said: Just in my net so far. Sound and feel are phenomenal on this design! I'm sure the question about the acoustics is something many are curious about. Titleist definitely worked some sorcery to make their full-titanium head sound the way it does. Is this head similar with a dull crack? Or is there any but of a metallic sound? IndyBonzo 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
Popeye64 Posted December 13, 2023 Share Posted December 13, 2023 Just in my net so far. Sound and feel are phenomenal on this design! Exactly my thoughts. This is going to be a hugely popular release. Sent from my SM-S908U using Tapatalk IndyBonzo 1 Quote Link to comment Share on other sites More sharing options...
Popeye64 Posted December 13, 2023 Share Posted December 13, 2023 I'm sure the question about the acoustics is something many are curious about. Titleist definitely worked some sorcery to make their full-titanium head sound the way it does. Is this head similar with a dull crack? Or is there any but of a metallic sound? I think that the Pro sounds even better. And I own both the TSR3 and 4Sent from my SM-S908U using Tapatalk IndyBonzo and azstu324 1 1 Quote Link to comment Share on other sites More sharing options...
03trdblack Posted December 13, 2023 Share Posted December 13, 2023 39 minutes ago, azstu324 said: I'm sure the question about the acoustics is something many are curious about. Titleist definitely worked some sorcery to make their full-titanium head sound the way it does. Is this head similar with a dull crack? Or is there any but of a metallic sound? The face feels really dense like you hit a forged iron with a thick face but with just a little metallic sound added in. It's addictive for sure. IndyBonzo and GolfSpy SAM 1 1 Quote My bag is a revolving door! Link to comment Share on other sites More sharing options...
GolfSpy SAM Posted December 13, 2023 Share Posted December 13, 2023 3 hours ago, 03trdblack said: All-fit does make a cog for the Maltby drivers Lol - you know I had NO idea what the "MB" cog was for! Sweet! IndyBonzo and 03trdblack 2 Quote Driver - Callaway Ai Smoke Max - 9* - Draw setting; Maltby UL (Otto Phlex) 5/7 Wood - Takomo Ignis Utility - Caley X01 Driving Iron (3 = 18*) (currently benched) Irons (5-PW) - Caley 01T Wedges (48, 52, 56, 60) - Indi Wedges FLX 48 / ATK 52, 56, 60 Putter - L.A.B. Directed Force 2.1 - 65*/DF3 65* Ball - Chrome Tour Triple-Track Link to comment Share on other sites More sharing options...
IndyBonzo Posted December 13, 2023 Share Posted December 13, 2023 Super curious here to read the reviews, especially re distance and dispersion on this club vs larger head/other brands + models. Quote Working at getting better ... and very slowly getting there. Paradym Max 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS1 (shafts: Tour 120S) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) Frontline Elite 1.0 Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
ArizonaLogan Posted December 17, 2023 Share Posted December 17, 2023 (edited) I got the 50°, 54°, and 58° TSW wedges. Not much to say about performance except that the low bounce suits my swing way better. Like, enough to change my biggest weakness (based on Strokes Gained) from short game to approach shots. Other than that, distance and spin are exactly where I expect them to be. The biggest difference is in feel. My previous non-forged wedges just didn't feel and sound as soft as these forged wedges do. The only complaint I have about these wedges is that I wish there wasn't red and black coloring on the M logo. I really prefer the silver "M" like on the TS4s, but the annoyance the red gives me is nothing compared to some other brands "cough" "cough" Kirkland. Edited December 17, 2023 by ArizonaLogan GolfSpy SAM 1 Quote : 0311 Gen5 - Driver : Tight Lies - 3W I need an 18°-19° club. : CB - 23° 4 Iron : MT-Pro - 5-PW : TSW - 50°, 54°,58° : DF3 - Putter Link to comment Share on other sites More sharing options...
GolfSpy SAM Posted December 17, 2023 Share Posted December 17, 2023 13 minutes ago, ArizonaLogan said: I got the 50°, 54°, and 58° TSW wedges. Not much to say about performance except that the low bounce suits my swing way better. Like, enough to change my biggest weakness (based on Strokes Gained) from short game to approach shots. Other than that, distance and spin are exactly where I expect them to be. The biggest difference is in feel. My previous non-forged wedges just didn't feel and sound as soft as these forged wedges do. The only complaint I have about these wedges is that I wish there wasn't red and black coloring on the M logo. I really prefer the silver "M" like on the TS4s, but the annoyance the red gives me is really nothing compared to some other brands "cough" "cough" Kirkland. Those look great - happy to hear they're serving you well so far. I would legit think about a whole bag of Maltby stuff at some point - just commit to the idea that they're producing some of the best clubs on the market in every category - think it might be a really fun experiment. Quote Driver - Callaway Ai Smoke Max - 9* - Draw setting; Maltby UL (Otto Phlex) 5/7 Wood - Takomo Ignis Utility - Caley X01 Driving Iron (3 = 18*) (currently benched) Irons (5-PW) - Caley 01T Wedges (48, 52, 56, 60) - Indi Wedges FLX 48 / ATK 52, 56, 60 Putter - L.A.B. Directed Force 2.1 - 65*/DF3 65* Ball - Chrome Tour Triple-Track Link to comment Share on other sites More sharing options...
KOG Posted December 17, 2023 Share Posted December 17, 2023 (edited) 2 hours ago, ArizonaLogan said: I got the 50°, 54°, and 58° TSW wedges. Not much to say about performance except that the low bounce suits my swing way better. Like, enough to change my biggest weakness (based on Strokes Gained) from short game to approach shots. Other than that, distance and spin are exactly where I expect them to be. The biggest difference is in feel. My previous non-forged wedges just didn't feel and sound as soft as these forged wedges do. The only complaint I have about these wedges is that I wish there wasn't red and black coloring on the M logo. I really prefer the silver "M" like on the TS4s, but the annoyance the red gives me is nothing compared to some other brands "cough" "cough" Kirkland. I know what you mean. Luckily its an easy fix. Put a dab of paint stripper or acetone on the logo and cover it completely and let it sit for an hour or so. Then brush it off with a nylon brush. Repeat if still some color remains. Came right off for me on the TS1s Edited December 17, 2023 by KOG azstu324 and vandyland 1 1 Quote Driver : Wilson Staff Dynapower Carbon 9* w Diamana ZF50 Stiff 3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff 7 Wood: Exotics XJ1 21* with Fujikara Pro 60 Tour Stiff Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff Utility Iron: Exotics CB ProH 21* w MMT 80 stiff 5-pw Matlby TS3 w MMT 80 stiff 54* & 60* Cleveland 588 Forged w KBS Hi-rev 2.0 125 Putter: Indi Allison Revelation CEO Cart Bag Link to comment Share on other sites More sharing options...
ArizonaLogan Posted December 17, 2023 Share Posted December 17, 2023 16 minutes ago, KOG said: Put a dab of paint stripper or acetone on the logo and cover it completely and let it sit for an hour or so. Then brush it off with a nylon brush. Repeat if still some color remains. Came right off for me on the TS1s Thanks for the tip. I'm not one to tinker, but this is a fix I might consider if the red bothers me enough. KOG and azstu324 2 Quote : 0311 Gen5 - Driver : Tight Lies - 3W I need an 18°-19° club. : CB - 23° 4 Iron : MT-Pro - 5-PW : TSW - 50°, 54°,58° : DF3 - Putter Link to comment Share on other sites More sharing options...
azstu324 Posted December 17, 2023 Author Share Posted December 17, 2023 3 hours ago, ArizonaLogan said: I got the 50°, 54°, and 58° TSW wedges. Not much to say about performance except that the low bounce suits my swing way better. Like, enough to change my biggest weakness (based on Strokes Gained) from short game to approach shots. Other than that, distance and spin are exactly where I expect them to be. The biggest difference is in feel. My previous non-forged wedges just didn't feel and sound as soft as these forged wedges do. The only complaint I have about these wedges is that I wish there wasn't red and black coloring on the M logo. I really prefer the silver "M" like on the TS4s, but the annoyance the red gives me is nothing compared to some other brands "cough" "cough" Kirkland. Hey a really quick and easy DIY fix for the logo is a q-tip and a bottle of acetone from a dollar store. Then follow up with some steel wool. The shape and look of a TSW wedges has to be one of my favorite of all time. And not just from Maltby but from any club maker. If you haven't yet, you'll find out that these play and feel as good as anything Fatshot and KOG 2 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
azstu324 Posted December 17, 2023 Author Share Posted December 17, 2023 34 minutes ago, ArizonaLogan said: Thanks for the tip. I'm not one to tinker, but this is a fix I might consider if the red bothers me enough. Oops looks like someone beat me to the answer KOG 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
ArizonaLogan Posted December 17, 2023 Share Posted December 17, 2023 5 hours ago, GolfSpy SAM said: just commit to the idea that they're producing some of the best clubs on the market in every category - think it might be a really fun experiment. Personally, I have noticed a quality difference in woods between big brands like Taylormade, Cobra, and PING, vs cheaper brands like Tour Edge, MacGregor, and even Mizuno. I'm not quite sure what it is, but I think most of it has to do with the finish. Because for some reason the paint and seams on my old ST-Z 220 driver and C722 3 wood felt "cheap". Not "cheap" like in a "driver will break" kind of way. Just cheap compared to the Cobra LTDx, Ping G410, and especially the Taylomade SIM2 Max (very high quality construction). So, even though recently I have been buying inexpensive "value" clubs to replace my old (5-20 years) "premium-ish" clubs. I'm still leery of woods. Source: I have been able to personally handle and hit a driver from every brand mentioned bedsides Tour Edge (I had a c722 3 wood). The McGregor was a women's driver. Owned by my parents, brother, or me. GolfSpy SAM 1 Quote : 0311 Gen5 - Driver : Tight Lies - 3W I need an 18°-19° club. : CB - 23° 4 Iron : MT-Pro - 5-PW : TSW - 50°, 54°,58° : DF3 - Putter Link to comment Share on other sites More sharing options...
KOG Posted December 17, 2023 Share Posted December 17, 2023 (edited) If you are talking about the Hot Launch series vs the exotics c722, the feel and finish is very different/ cheapish and some of the best finish and feel Ive had is with the exotics line. And McGregor is budget/cheap. Ive played a lot of different brands and find that each brand often have some good clubs and some meh clubs. Thats why I buy preowned top of the line models hrom previous renditions. Or I just build them. And currently I play maltby irons, Ping 425 max driver, Honma 3 wood, exotics hybrid and sm7 vokeys. All I purchased head only and my bag was about $700 total cost. Just buy the clubs you like from 1 or two series back. Edited December 17, 2023 by KOG GolfSpy SAM and NCDuffer 2 Quote Driver : Wilson Staff Dynapower Carbon 9* w Diamana ZF50 Stiff 3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff 7 Wood: Exotics XJ1 21* with Fujikara Pro 60 Tour Stiff Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff Utility Iron: Exotics CB ProH 21* w MMT 80 stiff 5-pw Matlby TS3 w MMT 80 stiff 54* & 60* Cleveland 588 Forged w KBS Hi-rev 2.0 125 Putter: Indi Allison Revelation CEO Cart Bag Link to comment Share on other sites More sharing options...
ArizonaLogan Posted December 17, 2023 Share Posted December 17, 2023 12 minutes ago, KOG said: If you are talking about the Hot Launch series vs the exotics c722, the feel and finish is very different/ cheapish and some of the best finish and feel Ive had is with the exotics line. And McGregor is budget/cheap. I'm going to clarify differently in case it helps. I don't mean that Tour Edge/MacGregor/Mizuno feel "low quality". I just mean that they feel "average quality" like Wilson/Adams/Cleveland and other "budget" brands instead of "above average" like Ping/Cobra or "superb quality" like Taylormade. GolfSpy SAM 1 Quote : 0311 Gen5 - Driver : Tight Lies - 3W I need an 18°-19° club. : CB - 23° 4 Iron : MT-Pro - 5-PW : TSW - 50°, 54°,58° : DF3 - Putter Link to comment Share on other sites More sharing options...
snoopy79 Posted December 18, 2023 Share Posted December 18, 2023 The TC Pro is an absolute beast. From the sound, feel, and low spin nature. It shocked me with its performance. It's very close in build parameters to the Titleist TSR4. I ran it in a head to head comparison, and the Pro blew it away. Dispersion and control were far better. Sound which is almost hard to believe was just as good if not netter than the TSR4. Feel certainly was. I did also run the TSR3 against it and that head faired far better vs the Pro. The Pro just barely edged it out. Oh and the head cover is very high quality and slick looking. Sent from my SM-S908U using TapatalkOkay now I know for sure what my next club purchase will be! Thanks for sharing Sent from my iPhone using Tapatalk IndyBonzo 1 Quote Current WITB: Driver: Kirkland Signature, adj. 10.5 Evenflow Riptide-Stiff, w/JumboMax Tour Series grip Fairway: KE4 3W w/KE4 75-R Irons MMB Forged 3-PW w/TT Dynamic Gold Lite Wedges: Vokey SM10 wedges 48.10F, 54.10S, 60.08M Putter: Sycamore 008 Mallet Preferred Ball: Vice Tour, or Vice Pro Link to comment Share on other sites More sharing options...
IndyBonzo Posted December 18, 2023 Share Posted December 18, 2023 (edited) I really like my driver! A lot! But ... darnit. If anyone compares the KE4 Tour against the Paradym TD, please report in here! EDIT: Anyone try hitting the Pro off the deck? Edited December 19, 2023 by IndyBonzo GolfSpy SAM 1 Quote Working at getting better ... and very slowly getting there. Paradym Max 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS1 (shafts: Tour 120S) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) Frontline Elite 1.0 Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
azstu324 Posted December 22, 2023 Author Share Posted December 22, 2023 (edited) OFFICIAL MALTBY BAT SIGNAL!!! Anybody following this thread, if you happen to have a spare set of TS1-IM's or a set that you can part with for a month or 2, please DM me! I'll explain when you message me what this is all about. Without going into too much detail, it could be an opportunity to be part of something very cool . I'm posting here and on WRX just to increase possibilities. Thanks!! Edited December 22, 2023 by azstu324 vandyland, GolfSpy SAM, IndyBonzo and 1 other 3 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.