Shanker1 Posted June 16, 2020 Share Posted June 16, 2020 (edited) I wanted to know if anyone could help me out by telling me about Harrison golf shafts. I bought some a few years back but just trying to identify them. The have a sticker on them that reads “ The longest Driving shafts” with a number “IS2”. Just wondering if they are for irons or a driver. Thanks! Edited June 16, 2020 by Shanker1 Quote Link to comment Share on other sites More sharing options...
cnosil Posted June 16, 2020 Share Posted June 16, 2020 Picture and shaft material would help. Did a quick google search an found Harrison part number HS-1S3 which is a steel iron shaft. Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
aerospace_ray Posted June 16, 2020 Share Posted June 16, 2020 58 minutes ago, Shanker1 said: I wanted to know if anyone could help me out by telling me about Harrison golf shafts. I bought some a few years back but just trying to identify them. The have a sticker on them that reads “ The longest Driving shafts” with a number “IS2”. Just wondering if they are for irons or a driver. Thanks! Would ideally like to see pic and specifically the tip, but I think Harrison IS2 were combo flex steel shafts that had long parallel tip section for trimming to multiple flexes. In other words, one shaft like the IS2 could be tip trimmed to play regular or firm/stiff. But I am not 100% positive. I use to buy these several years ago for using in test clubs. Hopefully others will post more information. I believe Harrison has a FB page so you might could post a question there. Good luck. Quote Link to comment Share on other sites More sharing options...
jaskanski Posted June 16, 2020 Share Posted June 16, 2020 I agree that it was probably a parallel tip iron shaft, but IS2 was L/A flex I think. Reg/Firm would be IS3. There were a number of shafts with the generic white label on the butt "Harrison - the longest driving shafts" etc, including steel and graphite. Some codes would even be (confusingly) I52 - which equated to senior flex graphite like the Star Plus. But I'd put money on L flex steel iron shaft with .370" tip and overall length of 40" for the IS2. aerospace_ray 1 Quote Link to comment Share on other sites More sharing options...
aerospace_ray Posted June 17, 2020 Share Posted June 17, 2020 Found this information on old Ebay listing. I do remember these shafts. Who knows if the labels are consistent. See below: https://www.ebay.com/itm/TEN-10-NEW-UNCUT-HARRISON-REGULAR-FIRM-FLEX-STEEL-SHAFTS-43-1-2-034-/164151167856?nma=true&si=TFBcdz0VsL7Lymv9gdCvKm5yi5M%3D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557Manufacturer: Harrison Manufacturer ID Nos: IS2 Shaft Material: Steel Flex: R/F Length: 43-1/2” Tip Diameter: .34” Butt Diameter: .59” Condition: New un-cut cnosil 1 Quote Link to comment Share on other sites More sharing options...
jaskanski Posted June 17, 2020 Share Posted June 17, 2020 I'll be danged.... Quote Link to comment Share on other sites More sharing options...
Bang60 Posted April 21, 2022 Share Posted April 21, 2022 On 6/17/2020 at 2:21 PM, aerospace_ray said: Found this information on old Ebay listing. I do remember these shafts. Who knows if the labels are consistent. See below: https://www.ebay.com/itm/TEN-10-NEW-UNCUT-HARRISON-REGULAR-FIRM-FLEX-STEEL-SHAFTS-43-1-2-034-/164151167856?nma=true&si=TFBcdz0VsL7Lymv9gdCvKm5yi5M%3D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557Manufacturer: Harrison Manufacturer ID Nos: IS2 Shaft Material: Steel Flex: R/F Length: 43-1/2” Tip Diameter: .34” Butt Diameter: .59” Condition: New un-cut Hi sorry I'm abit late but recently bought a "Harrison long drive graphite shaft" with a Warrior 7.5* head, I can't launch this driver maybe for a number of reasons one is it's 46.5 playing length. I've tried to find information online but with no added info on the shaft I've not found anything, has anyone else had used a Harrison shaft I'd appreciate any information. Cheers Colin Quote I’m a hacker who loves nothing more than to change how I play, be that grips shafts and heads its all fair game lol… Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.