Waazzupppp

I have discovered the same thing, actually. These things are fantastic. They feel VERY good. The rust is showing up, and they’re spinning nicely. 
I suspect the Modus Tour 120 shafts are helping, but, they are wicked saucy if you’re a pincher, which I definitely am. And, they look good.
Leading edge is still something I’m getting used to after years of Edel wedges. But, they definitely perform. 

Hey head over to @GolfSub70 and check out what they are giving away on instagram and twitter!  

I don't know about the fairway wood, but this is going in the bag as soon as they have them! AMAZING BLADES!

Sent from my SM-N960U1 using Tapatalk

I don't know about the fairway wood, but this is going in the bag as soon as they have them! AMAZING BLADES!

Sent from my SM-N960U1 using Tapatalk

I don't know about the fairway wood, but this is going in the bag as soon as they have them! AMAZING BLADES!

Sent from my SM-N960U1 using Tapatalk

I don't know about the fairway wood, but this is going in the bag as soon as they have them! AMAZING BLADES!

Sent from my SM-N960U1 using Tapatalk

Callaway Apparel has a big and tall section.

Was at MGS doing some more iron testing and saw the sub70 fairway woods leaning against the wall.   The pictures here don't do the club justice,  it is a beautiful looking fairway wood.   Looking forward to getting an opportunity to seeing how it performs. 

I have to admit that I am "this" player. I've been trying to shake my blades for 5 years now and keep going back to them. Most recently, I moved from my Wilson FG100's to the Mizuno JPX 900 Forged. I'm 5 rounds into my season and already seriously regret it. Probably the biggest issue I have is the fact that I hit the same shot almost everywhere on the face of the club. That's fine for the guy trying to hit the ball straight to the target every time, but when I drive it into the trees or need a good knockdown shot, I just don't have it with the cavity backs. 

Blades give me the feeling of control, not forgiveness. Blades give me the control to flight the ball where I need it and the ability to move the ball from right to left and left to right. I also like the "no offset" look that blades offer over many of the newer models. Another part of the blade that I prefer is the more traditional lofting of them. I know it sounds stupid, but I don't want to hit a 6 iron 220. That just means that I'm carrying 4 or 5 wedges AFTER my pitching wedge and losing the longer irons. 

Another side note,  I also like blades because everyone is scared of them. When I step on to the first tee with my blades in my bag, people get nervous. When I walk up with the Mizzy's they don't. There's something to the awe that blades deliver to others that can't be explained, but in a comp, blades are definitely something that people fear - and I like that. That may seem childish, but I'll take every competitive advantage I can take, and psyching out your opponents is one of them that comes with carrying blades.

Taking all of that into account, nothing, and I mean NOTHING feels as good as a perfectly hit blade. That's all there is to it. 

Good job on the weight loss.  @Kenny B mentioned Dillards, and I'd second that.  I've bought several Callaway shirts from them on sale for pretty cheap.  Don't know about tall, but they seem to have a pretty big selection.  I'd contribute checking out LL Bean online.  While they're mostly known for their hunting gear, I used to buy 2XLT dress shirts from them so they'd stay tucked in, and I know they offer polos.

Can't help you with the shirts but congrats on losing 70 lbs. that's quite an achievement.


Sent from my iPad using MyGolfSpy

Thanks for the updates! Our priority is to offer clubs that perform and it's always nice to hear when people are enjoying them!

Another quick check in with the sub70 raw wedges. Starting to get nasty with these things... 

Dateline - June 2018

I have played various forms of Wilson blades for 30 years now. My beloved 1989 Fluid Feel irons are still in a bag ready to go on a moments notice, but most recently I was bagging the FG-100's. Unfortunately, two of them were going to need replacing to make the set last another season, so I started looking at options. As I watched for what was next, the Wilson Proto images began to roll out, I had my next set of irons in my sights. Unfortunately, I was told the irons would be about $1200-1300 at retail and quickly began to reassess my needs. I continued shopping until October when I hit the JPX 900 Forged irons while trying on shoes at my local store. Now, instead of waiting for the next Wilson blade to hit, I made a drastic change to "fix" a fault and go with the Mizuno JPX 900 Forged irons and just haven't been happy with them. My search continued for my next "perfect irons".

SOMETHING NEW...

As the new year started and the Mizuno's only continued to feel OK, I really started looking hard at other options. Even though I don't have an unlimited golf budget, I did want something extremely playable and blade like, but didn't want to go used as some of the player's irons get beat pretty well before they go on the sale block. I started researching some of the smaller brands and found some great reviews on the Sub70 699 irons. Even low handicap players were crooning over the distance gains and the feel of these hollowed body beasts. I messaged Sub70 on social media and asked about them. Jason messaged me back almost instantly. He gave me a quick rundown of their irons and how the 639CB would be a better match for what I needed. Then, he mentioned the MB model and how it could be even better for me. After a bit of chatting back and forth, he had me give him my phone number and he called me - on a Saturday afternoon! What service! THIS went well beyond what I expected in the way of customer service and it only got better from there. Jason said to send over my specs and he would make up a demo club for me to hit and get it out to me. The next day I went down and double checked specs and sent them off. Within an hour, another email back confirming the specs and adjustments and everything was rolling.

ORDERED...

My shipping notification from UPS was sent out a few days later and after an AGONIZING few days, the black "Sub 70 Golf" box arrived at the shop and I began to drool. Finally the time to clock out arrived and I cracked open the box. The iron was in a "prototype finish" so not the final one, but I can honestly say, I hadn't seen an iron this beautiful since I first set eyes on those 1989 Fluid Feels at the driving range when I was 14 years old. Of course, falling for the looks of a club is one thing, but could it possibly match up to the playability of my beloved Wilson blades or would it feel squishy like most of the new "forged" offerings do? The range would have to wait until tomorrow.

OPENING THE BOX...

I rolled up to the course for a tournament that Saturday morning and "unofficially" unboxed the 639MB. I was still blown away by the looks, and the weighting of the head vs. the KBS Tour 130 shaft. It just felt perfectly balanced. I went with the stock Golf Pride 360 Tour Velvet grip just to keep things simple. The clean lines of the grip flowing to the shaft, then continuing down to the perfectly turned ferrule was a sight to see on it's own. Then the satin-esque finish of the head made the entire package scream PERFECTION. I carefully placed that 7 iron in the bag and headed over to the practice tee.

FIRST CONTACT...
 
I had thought my skills as a ball striker had diminished a bit over the years, but from the first ball with the 639MB, I realized that I still had it. Center strike after center strike produced a 165 yard draw dead on target. I then tried a cut fade, 160 and stopped on a dime- WITH RANGE BALLS! I think I'm in love with this iron already. Then I started flighting it - high, low, middle... All with easy success. I swapped out to the Mizuno just to make sure it wasn't my swing for the day - and trust me, the way I played, it wasn't. The Mizuno was good, but not like the Sub70 iron. I then did something that I normally don't try to do with them - hit a few heel and toe shots. Now, when I struck the ball outside the groove area on the toe, I lost a bit of distance, but the club virtually corrected the line of the shot - almost like an old wood did with the old "gear effect". It was incredible to watch and even more fun to experience first hand. Moving to the heel, I didn't get killed with the dead pull left that my older blades gave me. It was a nice straight flight, again with a slight distance loss. Overall, the performance of these is on par with the Muira's, Kyoei and other top blades I've tried over the years - and from what I see online, these are going to cost about 1/3 the price of a custom set of those guys.

FINAL THOUGHTS...

Ok, I'm going to be honest here and say that this 32° 7 iron should have been shorter than my 31° Mizuno, but it wasn't. Actually, as I looked at the yardages on center hits, the Project X LZ fitted Mizuno flew a bit higher, but was actually 3 yards shorter than the KBS Tour equipped 639MB. After looking up my stock distances again on my 1989 irons, degree vs. degree, my 167 yard 7 iron was at my peak swing, so tattooing shot after shot at 165 on the range is about as good as it gets. I wasn't able to get dispersion numbers yet, but I'm willing to bet I was 5 yards at most at 165 yards - which I will take all day long. Again, being able to flight an iron is probably the most important thing to me - far more important than distance or lofts, and the 639MB was so effortless in this way. I had completely lost that with the Mizuno's as they float the ball into the air and bring it down beautifully on every shot. Hitting the 639's, I remembered how it felt to be in complete control of the ball and it felt amazing. The good news is I'm 100% sold on these irons and the service that Sub 70 gave me... The bad news - I can't get a set of these until summer. Now, for some that play major tournament golf, Sub70 is getting through the approval process for the USGA ASAP. They thought they had submitting the right stuff to start with, but then the USGA needed some additional clubs (like a full set - etc...) to fully approve the irons. Approval will be coming soon so don't stress about that at all.

If you have any questions on the 639MB, I'd be happy to answer them and I know Jason and/or Jay from Sub70 are lurking around here with more information than I probably have at this point, but I'll do my best. Also, keep in mind that these are completely custom built for you, in the US and they have been amazing getting me information on them. I can't wait to get my order in as soon as they are available. More to come - summer 2019. 

PS: Please keep in mind, this is NOT the final finish. They are still tweaking that, but as soon as I get my set, I'll be sure to update everyone with pictures of the final finish of them.

Dateline - June 2018

I have played various forms of Wilson blades for 30 years now. My beloved 1989 Fluid Feel irons are still in a bag ready to go on a moments notice, but most recently I was bagging the FG-100's. Unfortunately, two of them were going to need replacing to make the set last another season, so I started looking at options. As I watched for what was next, the Wilson Proto images began to roll out, I had my next set of irons in my sights. Unfortunately, I was told the irons would be about $1200-1300 at retail and quickly began to reassess my needs. I continued shopping until October when I hit the JPX 900 Forged irons while trying on shoes at my local store. Now, instead of waiting for the next Wilson blade to hit, I made a drastic change to "fix" a fault and go with the Mizuno JPX 900 Forged irons and just haven't been happy with them. My search continued for my next "perfect irons".

SOMETHING NEW...

As the new year started and the Mizuno's only continued to feel OK, I really started looking hard at other options. Even though I don't have an unlimited golf budget, I did want something extremely playable and blade like, but didn't want to go used as some of the player's irons get beat pretty well before they go on the sale block. I started researching some of the smaller brands and found some great reviews on the Sub70 699 irons. Even low handicap players were crooning over the distance gains and the feel of these hollowed body beasts. I messaged Sub70 on social media and asked about them. Jason messaged me back almost instantly. He gave me a quick rundown of their irons and how the 639CB would be a better match for what I needed. Then, he mentioned the MB model and how it could be even better for me. After a bit of chatting back and forth, he had me give him my phone number and he called me - on a Saturday afternoon! What service! THIS went well beyond what I expected in the way of customer service and it only got better from there. Jason said to send over my specs and he would make up a demo club for me to hit and get it out to me. The next day I went down and double checked specs and sent them off. Within an hour, another email back confirming the specs and adjustments and everything was rolling.

ORDERED...

My shipping notification from UPS was sent out a few days later and after an AGONIZING few days, the black "Sub 70 Golf" box arrived at the shop and I began to drool. Finally the time to clock out arrived and I cracked open the box. The iron was in a "prototype finish" so not the final one, but I can honestly say, I hadn't seen an iron this beautiful since I first set eyes on those 1989 Fluid Feels at the driving range when I was 14 years old. Of course, falling for the looks of a club is one thing, but could it possibly match up to the playability of my beloved Wilson blades or would it feel squishy like most of the new "forged" offerings do? The range would have to wait until tomorrow.

OPENING THE BOX...

I rolled up to the course for a tournament that Saturday morning and "unofficially" unboxed the 639MB. I was still blown away by the looks, and the weighting of the head vs. the KBS Tour 130 shaft. It just felt perfectly balanced. I went with the stock Golf Pride 360 Tour Velvet grip just to keep things simple. The clean lines of the grip flowing to the shaft, then continuing down to the perfectly turned ferrule was a sight to see on it's own. Then the satin-esque finish of the head made the entire package scream PERFECTION. I carefully placed that 7 iron in the bag and headed over to the practice tee.

FIRST CONTACT...
 
I had thought my skills as a ball striker had diminished a bit over the years, but from the first ball with the 639MB, I realized that I still had it. Center strike after center strike produced a 165 yard draw dead on target. I then tried a cut fade, 160 and stopped on a dime- WITH RANGE BALLS! I think I'm in love with this iron already. Then I started flighting it - high, low, middle... All with easy success. I swapped out to the Mizuno just to make sure it wasn't my swing for the day - and trust me, the way I played, it wasn't. The Mizuno was good, but not like the Sub70 iron. I then did something that I normally don't try to do with them - hit a few heel and toe shots. Now, when I struck the ball outside the groove area on the toe, I lost a bit of distance, but the club virtually corrected the line of the shot - almost like an old wood did with the old "gear effect". It was incredible to watch and even more fun to experience first hand. Moving to the heel, I didn't get killed with the dead pull left that my older blades gave me. It was a nice straight flight, again with a slight distance loss. Overall, the performance of these is on par with the Muira's, Kyoei and other top blades I've tried over the years - and from what I see online, these are going to cost about 1/3 the price of a custom set of those guys.

FINAL THOUGHTS...

Ok, I'm going to be honest here and say that this 32° 7 iron should have been shorter than my 31° Mizuno, but it wasn't. Actually, as I looked at the yardages on center hits, the Project X LZ fitted Mizuno flew a bit higher, but was actually 3 yards shorter than the KBS Tour equipped 639MB. After looking up my stock distances again on my 1989 irons, degree vs. degree, my 167 yard 7 iron was at my peak swing, so tattooing shot after shot at 165 on the range is about as good as it gets. I wasn't able to get dispersion numbers yet, but I'm willing to bet I was 5 yards at most at 165 yards - which I will take all day long. Again, being able to flight an iron is probably the most important thing to me - far more important than distance or lofts, and the 639MB was so effortless in this way. I had completely lost that with the Mizuno's as they float the ball into the air and bring it down beautifully on every shot. Hitting the 639's, I remembered how it felt to be in complete control of the ball and it felt amazing. The good news is I'm 100% sold on these irons and the service that Sub 70 gave me... The bad news - I can't get a set of these until summer. Now, for some that play major tournament golf, Sub70 is getting through the approval process for the USGA ASAP. They thought they had submitting the right stuff to start with, but then the USGA needed some additional clubs (like a full set - etc...) to fully approve the irons. Approval will be coming soon so don't stress about that at all.

If you have any questions on the 639MB, I'd be happy to answer them and I know Jason and/or Jay from Sub70 are lurking around here with more information than I probably have at this point, but I'll do my best. Also, keep in mind that these are completely custom built for you, in the US and they have been amazing getting me information on them. I can't wait to get my order in as soon as they are available. More to come - summer 2019. 

PS: Please keep in mind, this is NOT the final finish. They are still tweaking that, but as soon as I get my set, I'll be sure to update everyone with pictures of the final finish of them.

This kind of thinking is what the big boys don't get right now... Look at how many sets they have out there just hoping to land people on something. Instead, make fewer great clubs that fits more people. I think it was the Tour Edge video where the President said he didn't want to make the best driver on the market, he wanted the best driver for 80% of the market... Smart idea...

Love where you're headed with this... Waiting impatiently for those MBs!!! Come on summer!!!

Sent from my SM-N960U1 using Tapatalk

Range session number three is in the books and now I have a problem... 
I spent about 60 balls on this 7 iron and it is BUTTER! I don't want to play anything else. I'm tempted to toss my ancient FG49's back in the bag until I can get a full set of the 639MB's.
Sound - The click on this head is just about perfect. It's not the muted "thunk" that a cavity back makes and it's not the "thwack" that my other blades make. It's a perfect blend of the two. I will say that forcing shots off the toe produces a lovely higher pitched click that lets you know you missed the center, but that's a good thing.
Feel - I can't say in words how amazing this thing feels. It's not spongy like the JPX900F's and it's not harsh like so many of my other blades. I guess I would describe it as a muted harshness maybe? When you center strike them, the ball just goes effortlessly off the club to the target. The mishits tend to deliver a bit more feedback, but that's to be expected in a muscle back design. I like the fact that I can feel the misses, without having to feel the misses.
Distance - This was a concern of mine after the first range session with them. I was down about 1/2 a club over my previous blades and a full club off the Mizuno's. Good news... I found my distance with it. With the higher flying Mizzy's, I had moved the ball slightly forward in my stance to cut the backspin (and thus the height) of the shot a bit. I wanted to flight the ball a bit lower with them so that was the change I made to my setup. After moving the ball back into the proper position for the 639's, the distance almost instantaneously appeared again. My dialed in distance (though I still haven't had a Trackman session to verify this) is 168 carry, 175 roll with the standard range ball. If the calculations work out correctly with every other club I've had, this should be a 175 carry on the course with a real ball. Done!
Durability - I haven't had the pleasure of hitting a rock with this thing yet, but so far, the grooves, face and the rest of the club head are doing fantastic. 
 
I know Sub 70 has a huge product line up and I don't want to hijack this thread with just this bad boy, but man, I love it!
 

Range session number three is in the books and now I have a problem... 
I spent about 60 balls on this 7 iron and it is BUTTER! I don't want to play anything else. I'm tempted to toss my ancient FG49's back in the bag until I can get a full set of the 639MB's.
Sound - The click on this head is just about perfect. It's not the muted "thunk" that a cavity back makes and it's not the "thwack" that my other blades make. It's a perfect blend of the two. I will say that forcing shots off the toe produces a lovely higher pitched click that lets you know you missed the center, but that's a good thing.
Feel - I can't say in words how amazing this thing feels. It's not spongy like the JPX900F's and it's not harsh like so many of my other blades. I guess I would describe it as a muted harshness maybe? When you center strike them, the ball just goes effortlessly off the club to the target. The mishits tend to deliver a bit more feedback, but that's to be expected in a muscle back design. I like the fact that I can feel the misses, without having to feel the misses.
Distance - This was a concern of mine after the first range session with them. I was down about 1/2 a club over my previous blades and a full club off the Mizuno's. Good news... I found my distance with it. With the higher flying Mizzy's, I had moved the ball slightly forward in my stance to cut the backspin (and thus the height) of the shot a bit. I wanted to flight the ball a bit lower with them so that was the change I made to my setup. After moving the ball back into the proper position for the 639's, the distance almost instantaneously appeared again. My dialed in distance (though I still haven't had a Trackman session to verify this) is 168 carry, 175 roll with the standard range ball. If the calculations work out correctly with every other club I've had, this should be a 175 carry on the course with a real ball. Done!
Durability - I haven't had the pleasure of hitting a rock with this thing yet, but so far, the grooves, face and the rest of the club head are doing fantastic. 
 
I know Sub 70 has a huge product line up and I don't want to hijack this thread with just this bad boy, but man, I love it!
 

Check dxl. I know Peter Millar has a big and tall department 

No answer to your main question, but congratulations on your significant achievement!

Range session number three is in the books and now I have a problem... 
I spent about 60 balls on this 7 iron and it is BUTTER! I don't want to play anything else. I'm tempted to toss my ancient FG49's back in the bag until I can get a full set of the 639MB's.
Sound - The click on this head is just about perfect. It's not the muted "thunk" that a cavity back makes and it's not the "thwack" that my other blades make. It's a perfect blend of the two. I will say that forcing shots off the toe produces a lovely higher pitched click that lets you know you missed the center, but that's a good thing.
Feel - I can't say in words how amazing this thing feels. It's not spongy like the JPX900F's and it's not harsh like so many of my other blades. I guess I would describe it as a muted harshness maybe? When you center strike them, the ball just goes effortlessly off the club to the target. The mishits tend to deliver a bit more feedback, but that's to be expected in a muscle back design. I like the fact that I can feel the misses, without having to feel the misses.
Distance - This was a concern of mine after the first range session with them. I was down about 1/2 a club over my previous blades and a full club off the Mizuno's. Good news... I found my distance with it. With the higher flying Mizzy's, I had moved the ball slightly forward in my stance to cut the backspin (and thus the height) of the shot a bit. I wanted to flight the ball a bit lower with them so that was the change I made to my setup. After moving the ball back into the proper position for the 639's, the distance almost instantaneously appeared again. My dialed in distance (though I still haven't had a Trackman session to verify this) is 168 carry, 175 roll with the standard range ball. If the calculations work out correctly with every other club I've had, this should be a 175 carry on the course with a real ball. Done!
Durability - I haven't had the pleasure of hitting a rock with this thing yet, but so far, the grooves, face and the rest of the club head are doing fantastic. 
 
I know Sub 70 has a huge product line up and I don't want to hijack this thread with just this bad boy, but man, I love it!
 

Last August I started my journey to lose 100 pounds. I was wearing 4x shirts and big pants. Now, 70 pounds into my loss, I'm down to an XLT shirt and normal pants, but that "T" part creates all sorts of crazy problems when shopping for golf clothing. I look around my local stores, which I love to support, only to find "stock sizes" and nothing in tall. I look around that store again and see that the majority of guys in there could easily be fitted into an XLT instead of a 2x, but they just wear the baggy clothing instead of what actually fits. As a "long torso" guy, it's frustrating to see that stores don't stock or manufacturers don't make decent Tall Size offerings. So, with that said, are there any golfers on here that shop XLT and if so, where do you find your best deals on good stuff?

I know JC Penny's has been a life saver for me and my new golf gear, but I'd love to find more places that offer better selections of Tall Sizes.

Here are some of my numbers with the Sub70 4 wood from the other day. We didn’t hit many as it was windy but I really like the way this club flys. I’ll take 268 all day long.






Sent from my iPhone using MyGolfSpy

Range session number three is in the books and now I have a problem... 
I spent about 60 balls on this 7 iron and it is BUTTER! I don't want to play anything else. I'm tempted to toss my ancient FG49's back in the bag until I can get a full set of the 639MB's.
Sound - The click on this head is just about perfect. It's not the muted "thunk" that a cavity back makes and it's not the "thwack" that my other blades make. It's a perfect blend of the two. I will say that forcing shots off the toe produces a lovely higher pitched click that lets you know you missed the center, but that's a good thing.
Feel - I can't say in words how amazing this thing feels. It's not spongy like the JPX900F's and it's not harsh like so many of my other blades. I guess I would describe it as a muted harshness maybe? When you center strike them, the ball just goes effortlessly off the club to the target. The mishits tend to deliver a bit more feedback, but that's to be expected in a muscle back design. I like the fact that I can feel the misses, without having to feel the misses.
Distance - This was a concern of mine after the first range session with them. I was down about 1/2 a club over my previous blades and a full club off the Mizuno's. Good news... I found my distance with it. With the higher flying Mizzy's, I had moved the ball slightly forward in my stance to cut the backspin (and thus the height) of the shot a bit. I wanted to flight the ball a bit lower with them so that was the change I made to my setup. After moving the ball back into the proper position for the 639's, the distance almost instantaneously appeared again. My dialed in distance (though I still haven't had a Trackman session to verify this) is 168 carry, 175 roll with the standard range ball. If the calculations work out correctly with every other club I've had, this should be a 175 carry on the course with a real ball. Done!
Durability - I haven't had the pleasure of hitting a rock with this thing yet, but so far, the grooves, face and the rest of the club head are doing fantastic. 
 
I know Sub 70 has a huge product line up and I don't want to hijack this thread with just this bad boy, but man, I love it!
 

Range session number three is in the books and now I have a problem... 
I spent about 60 balls on this 7 iron and it is BUTTER! I don't want to play anything else. I'm tempted to toss my ancient FG49's back in the bag until I can get a full set of the 639MB's.
Sound - The click on this head is just about perfect. It's not the muted "thunk" that a cavity back makes and it's not the "thwack" that my other blades make. It's a perfect blend of the two. I will say that forcing shots off the toe produces a lovely higher pitched click that lets you know you missed the center, but that's a good thing.
Feel - I can't say in words how amazing this thing feels. It's not spongy like the JPX900F's and it's not harsh like so many of my other blades. I guess I would describe it as a muted harshness maybe? When you center strike them, the ball just goes effortlessly off the club to the target. The mishits tend to deliver a bit more feedback, but that's to be expected in a muscle back design. I like the fact that I can feel the misses, without having to feel the misses.
Distance - This was a concern of mine after the first range session with them. I was down about 1/2 a club over my previous blades and a full club off the Mizuno's. Good news... I found my distance with it. With the higher flying Mizzy's, I had moved the ball slightly forward in my stance to cut the backspin (and thus the height) of the shot a bit. I wanted to flight the ball a bit lower with them so that was the change I made to my setup. After moving the ball back into the proper position for the 639's, the distance almost instantaneously appeared again. My dialed in distance (though I still haven't had a Trackman session to verify this) is 168 carry, 175 roll with the standard range ball. If the calculations work out correctly with every other club I've had, this should be a 175 carry on the course with a real ball. Done!
Durability - I haven't had the pleasure of hitting a rock with this thing yet, but so far, the grooves, face and the rest of the club head are doing fantastic. 
 
I know Sub 70 has a huge product line up and I don't want to hijack this thread with just this bad boy, but man, I love it!