Nick_D Posted March 1 Share Posted March 1 My favorite club in the bag has always been the putter. I love looking at everything putters: old ones, new ones, shiny tour putters.. you name it. Recently I started to refinish a few older Scotty Camerons in the garage and figured I'd start a thread for all my putter projects! To start off, I found a pretty nice deal on a Pro Platinum Newport Mid Slant. It was pretty beat up and started to have a few rust spots. I should have taken pictures while in progress, but I spent some time on the bench grinder and in the blast cabinet. Got all the dings out and got to a nice, consistent finish. Then sprayed some H-Series Cerakote coating on it and did some paintfill! After all was said and done, I'm pretty happy with the final result! And to my surprise the head weight was still bang on at 330 grams. Stay tuned for the next project in the works.... hint it has a welded long neck and will never leave my collection! BallsLeon, OdinSnipes414, TJ Hall and 2 others 3 2 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
TSauer Posted March 1 Share Posted March 1 That turned out great! This is something I've always wanted to get in to, but have zero idea where to start. I may have to come to you for some advice. Looking forward to your other projects, for sure. Nick_D and OdinSnipes414 1 1 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
Nick_D Posted March 1 Author Share Posted March 1 10 hours ago, TSauer said: That turned out great! This is something I've always wanted to get in to, but have zero idea where to start. I may have to come to you for some advice. Looking forward to your other projects, for sure. Thank you! I'm always happy to answer questions. TSauer and cnosil 2 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
Nick_D Posted March 4 Author Share Posted March 4 This should be in the mail from Hudson Made! What do you think, should I do some stamping or leave it clean? BallsLeon and TSauer 2 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
cnosil Posted March 4 Share Posted March 4 (edited) 2 minutes ago, Nick_D said: This should be in the mail from Hudson Made! What do you think, should I do some stamping or leave it clean? I personally prefer the clean look. I do have to ask if the putter is legal; neck seems pretty long. Edited March 4 by cnosil Nick_D 1 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
Nick_D Posted March 4 Author Share Posted March 4 5 minutes ago, cnosil said: I personally prefer the clean look. I do have to ask if the putter is legal; neck seems pretty long. I'll give it a measure once I get it in the mail! The legal 5 inches does look VERY long though. This picture is a putter Gary Woodland used in the 2022 US Open and the neck is crazy long too BallsLeon and cnosil 2 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
TSauer Posted March 4 Share Posted March 4 16 minutes ago, Nick_D said: This should be in the mail from Hudson Made! What do you think, should I do some stamping or leave it clean? Part of me thinks it's looks fine clean, but another part of me says a simple stamping on the heel or toe would look nice. Nick_D 1 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
Nick_D Posted March 9 Author Share Posted March 9 On 3/4/2024 at 9:17 AM, cnosil said: I personally prefer the clean look. I do have to ask if the putter is legal; neck seems pretty long. On 3/4/2024 at 9:25 AM, Nick_D said: I'll give it a measure once I get it in the mail! The legal 5 inches does look VERY long though. This picture is a putter Gary Woodland used in the 2022 US Open and the neck is crazy long too Just received the Hudson Made putter in the mail today and can confirm it is legal! The 5 inches from sole to socket does look pretty ridiculous, but I LOVE the way a long neck blade looks. BallsLeon 1 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
Nick_D Posted March 9 Author Share Posted March 9 Here are some side by side photos with my Newport 2 Longneck. I haven't put a shaft in it yet, but I expect it to be very close to face balanced. I'm still waiting on some stamps in the mail to add a little bit of stamping. You might be able to guess what at least part of my plan is based on the milled dot in the heel on the face of the putter. I do have to admit it looks VERY good clean.... BallsLeon and cnosil 2 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
cnosil Posted March 9 Share Posted March 9 25 minutes ago, Nick_D said: Just received the Hudson Made putter in the mail today and can confirm it is legal! The 5 inches from sole to socket does look pretty ridiculous, but I LOVE the way a long neck blade looks. It is definitely right at the 5 inch limit when you add in the hosel offset. Nice looking putter! Nick_D 1 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
Nick_D Posted March 22 Author Share Posted March 22 Stamping update on the Long Neck project! I fired up the bench grinder and did a little bit of shaping to get the final look and weight to where I wanted it. Then finished off by polishing the sole and face. Next up was stamping! I had originally planned to do a lot more, but I agree with the previous discussion that keeping it clean looked best. This was my first go on stamping anything and I practiced on a few old wedges first before going right at the putter. Its not perfect, but that's the beauty of hand stamping in my opinion. I prefer a firmer feeling putter and this turned out perfect. Has a ton of feedback on mishits and has a beautiful, pure sound. What are your thoughts on the paintfill? I considered going black, but figured I'd try out the translucent red to start.... TSauer, TJ Hall, BallsLeon and 1 other 1 2 1 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
cnosil Posted March 22 Share Posted March 22 5 minutes ago, Nick_D said: Stamping update on the Long Neck project! I fired up the bench grinder and did a little bit of shaping to get the final look and weight to where I wanted it. Then finished off by polishing the sole and face. Next up was stamping! I had originally planned to do a lot more, but I agree with the previous discussion that keeping it clean looked best. This was my first go on stamping anything and I practiced on a few old wedges first before going right at the putter. Its not perfect, but that's the beauty of hand stamping in my opinion. What are your thoughts on the paintfill? I considered going black, but figured I'd try out the translucent red to start.... Looks great. I like the minimalist stamping. Personally I'd do something besides red; too Cameron looking. If you want subtle black or gray. If you want a little pop a lime green, yellow, or chartreuse. TJ Hall, Nick_D and BallsLeon 3 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
TSauer Posted March 22 Share Posted March 22 14 minutes ago, Nick_D said: Stamping update on the Long Neck project! I fired up the bench grinder and did a little bit of shaping to get the final look and weight to where I wanted it. Then finished off by polishing the sole and face. Next up was stamping! I had originally planned to do a lot more, but I agree with the previous discussion that keeping it clean looked best. This was my first go on stamping anything and I practiced on a few old wedges first before going right at the putter. Its not perfect, but that's the beauty of hand stamping in my opinion. I prefer a firmer feeling putter and this turned out perfect. Has a ton of feedback on mishits and has a beautiful, pure sound. What are your thoughts on the paintfill? I considered going black, but figured I'd try out the translucent red to start.... This looks slick! I agree with Chris on the paintfill, anything but red. My vote is for something purple or seafoam green. Nick_D 1 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
Nick_D Posted March 22 Author Share Posted March 22 1 hour ago, cnosil said: Looks great. I like the minimalist stamping. Personally I'd do something besides red; too Cameron looking. If you want subtle black or gray. If you want a little pop a lime green, yellow, or chartreuse. 1 hour ago, TSauer said: This looks slick! I agree with Chris on the paintfill, anything but red. My vote is for something purple or seafoam green. That was my exact thought when I was doing it, but the translucent red looks so good in the face dot. I'll probably go with translucent blue or just black next! cnosil 1 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
TJ Hall Posted March 22 Share Posted March 22 Those putters are all quite nice looking…well done! Nick_D 1 Quote TaylorMade SIM 2 Max Driver TaylorMade Stealth 3 wood Titleist U510 Hybrid (3H) TaylorMade Tour Preferred CB Irons Vokey SM8 Wedges (52/56/60) Odyssey Ai-ONE 7S Putter Link to comment Share on other sites More sharing options...
Triple_Putt Posted March 22 Share Posted March 22 You do some really nice work! Looking forward to seeing more Nick_D 1 Quote Super Burner 2.0 10.5* Fly-Z hybrid SMS 4-GW i3 5 Wood SM7 56*,60*, SM8 52* Versa 1 putter 2023 Tested: Edel SMS Irons Link to comment Share on other sites More sharing options...
Nick_D Posted March 24 Author Share Posted March 24 I'm glad you guys suggested switching the paintfill, I think the black looks a lot better. finished it off with a black stepless shaft and a Garsen Quad Tour non-taper grip. What do you think? TSauer, cnosil, Triple_Putt and 2 others 2 2 1 Quote Link to What's in My Bag Post - G430 Max - LTDx 3 Wood - Mavrik 4 & 5 hybrids - Pro 225 Irons - SM9 50, 54, 58 degree - Teryllium Longneck Newport 2 / - Jailbird 380 / Hudson Made Carman Custom Nick_D's Putter Projects - RB Tour X Ball Link to BirdieBall 2-in-1 Putting/Hitting Mat 2023 Forum Review Link to comment Share on other sites More sharing options...
TSauer Posted March 24 Share Posted March 24 2 hours ago, Nick_D said: I'm glad you guys suggested switching the paintfill, I think the black looks a lot better. finished it off with a black stepless shaft and a Garsen Quad Tour non-taper grip. What do you think? I'm diggin it! Nick_D 1 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.