azstu324 Posted May 17, 2023 Author Share Posted May 17, 2023 2 hours ago, pozzit said: So???? How did it go? Sooooo.. yesterday wasn't the best day to be testing a new set of irons unfortunately. From about the 3rd hole to the end the wind was 2-3 clubs strong and in all directions. Also the group I played with was playing from the forward tees which really only puts the green within a wedge for most holes. I'm kind of writing yesterday off as a valid test day. The feeling of the clubs with these shafts is really good. It's solid but soft and the club just moves through the ball. Not quite the feeling like the ball isn't there like the TS3's that I'm reading but it feels as good as anything I've played and right there with Mizuno's and Callaway RAZR X MB's that I think are some of the best feeling irons ever made. I'm going to try to get to my exec where I can pretty much use all of the irons. GolfSpy SAM and IndyBonzo 2 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
KOG Posted May 17, 2023 Share Posted May 17, 2023 Beautiful those ts4s....Are those Steel fibers? IndyBonzo 1 Quote Driver : Yamaha RMX 220 9.5 With Diamana ZF50 Stiff 3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff 7 Wood: Yamaha RMX VD 21* with Diamana Whiteboard 60 Stiff Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff Utility Iron/ 5 iron: Srixon ZX 23* w MMT 85 stiff 6-pw Matlby TS3 w MMT 85 stiff 50*, 54* Mack Daddy 4 black w Modus 120 stiff 58* Mack Daddy 3 PM Grind w Modus 120 stiff Putter: Ben Hogan BHB03 W UST Freq Filtered shaft Revelation CEO Cart Bag Link to comment Share on other sites More sharing options...
azstu324 Posted May 17, 2023 Author Share Posted May 17, 2023 9 minutes ago, KOG said: Beautiful those ts4s....Are those Steel fibers? No they're actually KBS C-Taper Lites. Satin finish. Installed them logo down. Still considering just removing the label sticker altogether. Also contemplating some custom ferrules down the road. Eventually they'll just look too nice to even play and I'll have to get another set Deepred and IndyBonzo 2 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
KOG Posted May 17, 2023 Share Posted May 17, 2023 1 minute ago, azstu324 said: No they're actually KBS C-Taper Lites. Satin finish. Installed them logo down. Still considering just removing the label sticker altogether. Also contemplating some custom ferrules down the road. Eventually they'll just look too nice to even play and I'll have to get another set Ohh ok. Love the way they look. The ribs on the sole like the max wedges just looks so high end and clean. I love my TS3 the more I play them. Let us know how easy these play as the TS3 are nearly as forgiving as the Ke4 Max. The location of the logo with the new minimalist designs makes mixed sets blend in so well. Love the minimalist design on their irons, hope they take the same path on the new woods/hybrids. azstu324 and IndyBonzo 2 Quote Driver : Yamaha RMX 220 9.5 With Diamana ZF50 Stiff 3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff 7 Wood: Yamaha RMX VD 21* with Diamana Whiteboard 60 Stiff Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff Utility Iron/ 5 iron: Srixon ZX 23* w MMT 85 stiff 6-pw Matlby TS3 w MMT 85 stiff 50*, 54* Mack Daddy 4 black w Modus 120 stiff 58* Mack Daddy 3 PM Grind w Modus 120 stiff Putter: Ben Hogan BHB03 W UST Freq Filtered shaft Revelation CEO Cart Bag Link to comment Share on other sites More sharing options...
azstu324 Posted May 17, 2023 Author Share Posted May 17, 2023 No doubt this year's design aesthetics are next level for Maltby. Their tech has always been on par but the looks this year might even get them noticed by reviewers I played my first round with these yesterday and while I was on the practice green waiting to be called up noticed 3 separate individuals stop and stare at the clubs trying to figure out what brand they were. The subtle silver M had them all scratching their heads and I LOVE that! As I was putting my putter away one of them actually ran up and asked about them. KOG and IndyBonzo 2 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
IndyBonzo Posted May 19, 2023 Share Posted May 19, 2023 Man I love the looks of those. Please give us a review @azstu324. I’m shocked that they look like that and their MPF is so high. If you find that they are as forgiving as their MPF score and workable, these will have to be a strong consideration for me in the future when I tire of my current new irons. (CHA in full effect.) Thank you for sharing the photos! And hope you love them. GolfSpy SAM 1 Quote Working at getting better ... and very slowly getting there. Paradym 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts: LZ 6.0) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) DF 2.1 (BTG shaft) Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
azstu324 Posted May 19, 2023 Author Share Posted May 19, 2023 1 hour ago, IndyBonzo said: Man I love the looks of those. Please give us a review @azstu324. I’m shocked that they look like that and their MPF is so high. If you find that they are as forgiving as their MPF score and workable, these will have to be a strong consideration for me in the future when I tire of my current new irons. (CHA in full effect.) Thank you for sharing the photos! And hope you love them. @IndyBonzo I'm hoping to get out for a more legit round this weekend (Sunday - Tuesday for me) I was going to re-up my membership at the PGATSS this week but found out that my store is remodeling their hitting bays so they're closed for a month or 2. I was ready for a serious #s session but that got shot down. TBC IndyBonzo 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
IndyBonzo Posted May 19, 2023 Share Posted May 19, 2023 I keep reading about these. I have lust in my heart for a combo TS3/TS4 set, and I haven’t even finished getting my second iron set reshafted yet and am likely getting my first set reshafted too (due to a faulty fitting). I don’t need another set of irons but … these and the Edels! Darnit. I need a chaperone. At least I am going to wait to hear the reviews. Maybe.!?!? sirchunksalot and GolfSpy SAM 1 1 Quote Working at getting better ... and very slowly getting there. Paradym 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts: LZ 6.0) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) DF 2.1 (BTG shaft) Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
IndyBonzo Posted May 20, 2023 Share Posted May 20, 2023 Can anyone share thoughts on the TT Score shafts used in the paks? Comparable at all to the PX LZ 6.0 shaft? I suspect not but worth asking Thank you in advance friends. Quote Working at getting better ... and very slowly getting there. Paradym 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts: LZ 6.0) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) DF 2.1 (BTG shaft) Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
Deepred Posted May 20, 2023 Share Posted May 20, 2023 They are a versatile shaft, high launch, good feel. If you are a smooth swinger they are great. IndyBonzo 1 Quote Link to comment Share on other sites More sharing options...
Popeye64 Posted May 20, 2023 Share Posted May 20, 2023 Can anyone share thoughts on the TT Score shafts used in the paks? Comparable at all to the PX LZ 6.0 shaft? I suspect not but worth asking Thank you in advance friends. If the PX is a higher launching shaft then yes. Very compatible. TT Score LT is a legitimate shaft. Don't let the price fool you. Sent from my SM-S908U using Tapatalk IndyBonzo 1 Quote Link to comment Share on other sites More sharing options...
GolfSpy SAM Posted May 20, 2023 Share Posted May 20, 2023 2 hours ago, IndyBonzo said: Can anyone share thoughts on the TT Score shafts used in the paks? Comparable at all to the PX LZ 6.0 shaft? I suspect not but worth asking Thank you in advance friends. Can’t compare it to the PX LZ 6.0, but can say I built it up to R+ for the TS3 (6 & 9-iron) and liked it, but found the weight difference from my Nippon 105s to be a little more than I was hoping for. However, for $13/shaft, could be worth a shot - you may love them, and if not, you're not out a huge investment. IndyBonzo 1 Quote Driver - Callaway Ai Smoke Max - 9* - Draw setting; Maltby UL (Otto Phlex) 5/7 Wood - Takomo Ignis Utility - Caley X01 Driving Iron (3 = 18*) (currently benched) Irons (5-PW) - Caley 01T Wedges (48, 52, 56, 60) - Indi Wedges FLX 48 / ATK 52, 56, 60 Putter - L.A.B. Directed Force 2.1 - 65*/DF3 65* Ball - Chrome Tour Triple-Track Link to comment Share on other sites More sharing options...
KOG Posted May 20, 2023 Share Posted May 20, 2023 (edited) 2 hours ago, IndyBonzo said: Can anyone share thoughts on the TT Score shafts used in the paks? Comparable at all to the PX LZ 6.0 shaft? I suspect not but worth asking Thank you in advance friends. The LZ are a mid launch and a bit firmer overall except in the center section. The Score are more high launching with a softer tip. Weight is the same. They launch too high for me and I prefer a low lauch which is why Im still playing dg s300s. Also, you can search shaft pulls on ebay and you often can find a bunch of shafts for cheap. I personaly found a set Of Toski 3-pw for $75 on the bay that had the dg s300 shafts and pulled them and sold the heads for $100. A secretly good deal are these nippon pro 840s which match the bend profile of the LZ but are lighter https://www.hirekogolf.com/nippon-ns-pro-840-iron-shaft-s-flex.html best deal out there if you need a lighter steel shaft Some brands like Adams used legit shafts like kbs and a whole set goes for less than a set of shafts. Steel shafts can be pulled and re-used over and over unlike graphite. Edited May 20, 2023 by KOG IndyBonzo 1 Quote Driver : Yamaha RMX 220 9.5 With Diamana ZF50 Stiff 3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff 7 Wood: Yamaha RMX VD 21* with Diamana Whiteboard 60 Stiff Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff Utility Iron/ 5 iron: Srixon ZX 23* w MMT 85 stiff 6-pw Matlby TS3 w MMT 85 stiff 50*, 54* Mack Daddy 4 black w Modus 120 stiff 58* Mack Daddy 3 PM Grind w Modus 120 stiff Putter: Ben Hogan BHB03 W UST Freq Filtered shaft Revelation CEO Cart Bag Link to comment Share on other sites More sharing options...
azstu324 Posted May 20, 2023 Author Share Posted May 20, 2023 35 minutes ago, KOG said: The LZ are a mid launch and a bit firmer overall except in the center section. The Score are more high launching with a softer tip. Weight is the same. They launch too high for me and I prefer a low lauch which is why Im still playing dg s300s. Also, you can search shaft pulls on ebay and you often can find a bunch of shafts for cheap. I personaly found a set Of Toski 3-pw for $75 on the bay that had the dg s300 shafts and pulled them and sold the heads for $100. A secretly good deal are these nippon pro 840s which match the bend profile of the LZ but are lighter https://www.hirekogolf.com/nippon-ns-pro-840-iron-shaft-s-flex.html best deal out there if you need a lighter steel shaft Some brands like Adams used legit shafts like kbs and a whole set goes for less than a set of shafts. Steel shafts can be pulled and re-used over and over unlike graphite. It's funny you mention that because I was having the same discussion with a guy that I traded a driver shaft for a whole set of Recoil 680's with. We both do hobby club work. If you have the know-how and some basic tools, you begin to see sets of clubs in a much different perspective. A $100 set of clubs could easily have $200 worth of shafts but most people wouldn't think that taking the clubs apart would make any sense. Forrest for the trees situation. IndyBonzo and KOG 2 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
IndyBonzo Posted May 20, 2023 Share Posted May 20, 2023 Thank you @KOG @Deepred@GolfSpy SAM @Popeye64and @azstu324 for the good input. I am trying to figure a way to test a TS3 and TS4 without spending $140 +/-apiece and was thinking of ordering them with the $10 Score shaft to save some coin. I have old clubs lying around and I suppose I could pull shafts and just buy the heads and build my own. I have built drivers no problem (which I can configure using movable weights in the heads), but worry about jacking up swing weight if I shaft irons myself. Maybe I should just get over my reticence and give it a whirl. Much appreciated. KOG and Deepred 2 Quote Working at getting better ... and very slowly getting there. Paradym 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts: LZ 6.0) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) DF 2.1 (BTG shaft) Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
KOG Posted May 20, 2023 Share Posted May 20, 2023 (edited) 1 hour ago, IndyBonzo said: Thank you @KOG and @azstu324 for the good input. I am trying to figure a way to test a TS3 and TS4 without spending $140 +/-apiece and was thinking of ordering them with the $10 Score shaft to save some coin. I have old clubs lying around and I suppose I could pull shafts and just buy the heads and build my own. I have built drivers no problem (which I can configure using movable weights in the heads), but worry about jacking up swing weight if I shaft irons myself. Maybe I should just get over my reticence and give it a whirl. Much appreciated. If you have unused clubs def just pull a shaft. Its easy just heat the hosel up with a butane torch and rotate till you smell or hear the epoxy melt. Then step on the club head and twist and pull out from the grip. If you want to save the ferrule, razor blade it at the hosel so it separates and push it up a bit before hitting with the flame. Theres lots of vids on how to but its fairly simple, cant mess it up for steel shaft pulls Otherwise, the pack is prob like $10-15 more so maybe save the effort. Up to you Edited May 20, 2023 by KOG IndyBonzo 1 Quote Driver : Yamaha RMX 220 9.5 With Diamana ZF50 Stiff 3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff 7 Wood: Yamaha RMX VD 21* with Diamana Whiteboard 60 Stiff Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff Utility Iron/ 5 iron: Srixon ZX 23* w MMT 85 stiff 6-pw Matlby TS3 w MMT 85 stiff 50*, 54* Mack Daddy 4 black w Modus 120 stiff 58* Mack Daddy 3 PM Grind w Modus 120 stiff Putter: Ben Hogan BHB03 W UST Freq Filtered shaft Revelation CEO Cart Bag Link to comment Share on other sites More sharing options...
azstu324 Posted May 20, 2023 Author Share Posted May 20, 2023 15 minutes ago, KOG said: If you have unused clubs def just pull a shaft. Its easy just heat the hosel up with a butane torch and rotate till you smell or hear the epoxy melt. Then step on the club head and twist and pull out from the grip. If you want to save the ferrule, razor blade it at the hosel so it separates and push it up a bit before hitting with the flame. Theres lots of vids on how to but its fairly simple, cant mess it up for steel shaft pulls Otherwise, the pack is prob like $10-15 more so maybe save the effort. Up to you Just to preface this method is for steel only! KOG and IndyBonzo 2 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
KOG Posted May 20, 2023 Share Posted May 20, 2023 very true. Graphite is delicate IndyBonzo 1 Quote Driver : Yamaha RMX 220 9.5 With Diamana ZF50 Stiff 3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff 7 Wood: Yamaha RMX VD 21* with Diamana Whiteboard 60 Stiff Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff Utility Iron/ 5 iron: Srixon ZX 23* w MMT 85 stiff 6-pw Matlby TS3 w MMT 85 stiff 50*, 54* Mack Daddy 4 black w Modus 120 stiff 58* Mack Daddy 3 PM Grind w Modus 120 stiff Putter: Ben Hogan BHB03 W UST Freq Filtered shaft Revelation CEO Cart Bag Link to comment Share on other sites More sharing options...
IndyBonzo Posted May 21, 2023 Share Posted May 21, 2023 I ordered a TS3 7 iron to try. I really have a problem. Love this forum, but it’s not helping. Lol. Deepred, vandyland and GolfSpy SAM 2 1 Quote Working at getting better ... and very slowly getting there. Paradym 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts: LZ 6.0) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) DF 2.1 (BTG shaft) Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
Popeye64 Posted May 21, 2023 Share Posted May 21, 2023 TS3s filling the bag today went on to score a -1 71. Simple setup with the Score LT shafts. Had a blast Sent from my SM-S908U using Tapatalk IndyBonzo, KOG and GolfSpy SAM 3 Quote Link to comment Share on other sites More sharing options...
IndyBonzo Posted May 21, 2023 Share Posted May 21, 2023 11 minutes ago, Popeye64 said: TS3s filling the bag today went on to score a -1 71. Simple setup with the Score LT shafts. Had a blast Sent from my SM-S908U using Tapatalk Great looking clubs and super round! Popeye64 1 Quote Working at getting better ... and very slowly getting there. Paradym 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts: LZ 6.0) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) DF 2.1 (BTG shaft) Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
azstu324 Posted May 23, 2023 Author Share Posted May 23, 2023 Oh boy do I have some news to report.. First off.. I'm not a religious man.. but I'd like to start by thanking the Lord for the Maltby TS4! Today I played my favorite little exec Springfield GC. This course is really thoughtfully laid out. There are 7 decent sized par 4's and 11 par 3's. The par 3's are designed to allow you to use your entire bag ranging from 125 yds to 210 yds and everything in between. Additionally, most of the greens have shelves so shot placement is always a factor. I shot par which is 61.. And my personal best on this course! Of the 11 par 3's, I hit GIR on all but 1. These things are just point and shoot. They feel insanely good, and despite the slightly weaker lofts, I was keeping up with all of the distances from my OG TS1's. Hopefully next week I'll be playing a longer course to really stretch these things out. So far.. I'm 100% satisfied with these. GolfSpy SAM, IndyBonzo, pozzit and 5 others 7 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
IndyBonzo Posted May 25, 2023 Share Posted May 25, 2023 My TS3 built to my playing specs arrives today. I figured, if I end up loving it and build a set, it will be ready to go. I am eager to give it a try. (Clearly, if I am posting about it before it arrives.) @azstu324 I am glad to hear you love the TS4s. I am curious about the TS4 also. Based on handicap and your score cited above, you are clearly a better golfer than me, but -- do you find it forgiving and workable? Is there another iron to which you would compare it? Thank you in advance. StrokerAce and GolfSpy SAM 2 Quote Working at getting better ... and very slowly getting there. Paradym 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts: LZ 6.0) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) DF 2.1 (BTG shaft) Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
StrokerAce Posted May 25, 2023 Share Posted May 25, 2023 Got this head on their clearance section last year for 75 cents... yeah, less than a dollar. I was buying supplies for my first club build and figured why not. Picked up a hybrid shaft on e b a y and it is now my 'stinger' iron. It's a little butter-knifey, but surprisingly forgiving. The number is 3 but loft is closer to 4. azstu324, GolfSpy SAM, vandyland and 3 others 5 1 Quote Driver- Titleist TSR3 10* Woods- Cobra LTD 3w 15*, 5W 19* Irons- Titleist 718 AP2 (5i-50*) Wedges- Callaway Jaws Raw (54/58) Putter- Wilson Infinite Grant Park Ball- Maxfli Tour X Buggy- Motocaddy M7 GPS Remote Electric Caddy Bag- Motocaddy Dry-Series Proudly testing for 2024: Link to comment Share on other sites More sharing options...
azstu324 Posted May 25, 2023 Author Share Posted May 25, 2023 1 hour ago, IndyBonzo said: Based on handicap and your score cited above, you are clearly a better golfer than me, but -- do you find it forgiving and workable? Is there another iron to which you would compare it? Thank you in advance. Take this all with a grain of salt as I've only had 1 round with them Aesthetically these could be a little bit intimidating for some. I would say that they are a very inviting looking blade. The top line is medium thin with minimal offset but the blade length is longer than most and that's a characteristic of Maltby building in some extra forgiveness. As a higher single digits guy, these are absolutely perfect to my eye. As for workability, these will do anything that you ask of them. Forgiveness on these is exactly as advertised. If you can get past the blade-ish appearance, these play like a GI iron. Just the 1 round that I played, I'm already as confident with these as I was with my TS1-s that I played for 3 years. Not sure yet what club id compare these to. They're really their own thing which is also super cool. GolfSpy SAM and IndyBonzo 2 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
pozzit Posted May 25, 2023 Share Posted May 25, 2023 8 minutes ago, azstu324 said: blade-ish appearance, Do you mean this as "not as confidence inspiring" (thin and forgiving) or "chunky blade" (forgiving and thin for its forgiveness level) Slight difference but hope it makes sense. Quote Driver: Ben Hogan GS53 4W: Maltby KE4 2i: Maltby KE4 FDI 4-PW: Maltby TS-1 - C-Taper 120g 50,54,58: Maltby TSW Putter: L.A.B. DF2.1 Accra Shaft 2023 Forum Testers - L.A.B. Putters Ball: Mixed prefer ProV1 or Snell Handicap: 9.2 - Best Score: 72 (E) Springdale CC, Canton NC -2022 2020 Forum Tester - Ben Hogan GS53 Driver Link to comment Share on other sites More sharing options...
IndyBonzo Posted May 25, 2023 Share Posted May 25, 2023 25 minutes ago, azstu324 said: Take this all with a grain of salt as I've only had 1 round with them Aesthetically these could be a little bit intimidating for some. I would say that they are a very inviting looking blade. The top line is medium thin with minimal offset but the blade length is longer than most and that's a characteristic of Maltby building in some extra forgiveness. As a higher single digits guy, these are absolutely perfect to my eye. As for workability, these will do anything that you ask of them. Forgiveness on these is exactly as advertised. If you can get past the blade-ish appearance, these play like a GI iron. Just the 1 round that I played, I'm already as confident with these as I was with my TS1-s that I played for 3 years. Not sure yet what club id compare these to. They're really their own thing which is also super cool. Thank you @azstu324! Much appreciated, and very glad you love them. azstu324 1 Quote Working at getting better ... and very slowly getting there. Paradym 8* ( Shogun Blue M0 Otto-Phlex) Brnr Mini driver 13.5* ( FX 3.0 140 M1 Otto-Phlex) Paradym X 4 and 5 Hybrids Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts: LZ 6.0) RTX6 Zipcore 53*, and 58* mid wedges ( wedge shafts 6.5) DF 2.1 (BTG shaft) Gloves My Official 2024 TaylorMade Qi10 Review: https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200 My Official 2023 Red Rooster Sussex Glove Review: https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042 Link to comment Share on other sites More sharing options...
azstu324 Posted May 25, 2023 Author Share Posted May 25, 2023 1 hour ago, pozzit said: Do you mean this as "not as confidence inspiring" (thin and forgiving) or "chunky blade" (forgiving and thin for its forgiveness level) Slight difference but hope it makes sense. The term "blade" has always been kind of vague to me. Kind of like classifying shaft stiffness based on the label. there's definitely some overlapping of categories. Technically any MB is automatically categorized as a blade. That said I've seen some CB's more intimidating than MB's. These are definitely MB's in appearance and design but they aren't nearly as frightening as some "blades" I've seen or played in the past. For example, I played some Callaway X blade MB's and Cleveland TA1's that I would consider fine cutlery in the iron world. The TS4's aren't chunky AT ALL, but they aren't the smallest that I've seen. Let's call them "fuller figured" blades with some very sexy curves . If you were to also classify the OG TS-1 as a version of a MB/blade, I'd say the TS4's are more of a blade in appearance and feel but maybe better forgiveness on toe or lower groove hits. This for me is great because those are the 2 areas that I find my inefficiencies in hitting. If anybody is at all familiar with the DBM/TE's, I'd say a similar top line width but with much narrower soles and similar length, but more forgiving and better feeling. Much better turf interaction and forgiveness. Also, MUCH better transition design from longer to shorter clubs. Here's an image that I "borrowed" from another forum of the TS4 and DBM 6i GolfSpy SAM 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
pozzit Posted May 25, 2023 Share Posted May 25, 2023 10 minutes ago, azstu324 said: The term "blade" has always been kind of vague to me. Kind of like classifying shaft stiffness based on the label. there's definitely some overlapping of categories. Technically any MB is automatically categorized as a blade. That said I've seen some CB's more intimidating than MB's. These are definitely MB's in appearance and design but they aren't nearly as frightening as some "blades" I've seen or played in the past. For example, I played some Callaway X blade MB's and Cleveland TA1's that I would consider fine cutlery in the iron world. The TS4's aren't chunky AT ALL, but they aren't the smallest that I've seen. Let's call them "fuller figured" blades with some very sexy curves . If you were to also classify the OG TS-1 as a version of a MB/blade, I'd say the TS4's are more of a blade in appearance and feel but maybe better forgiveness on toe or lower groove hits. This for me is great because those are the 2 areas that I find my inefficiencies in hitting. If anybody is at all familiar with the DBM/TE's, I'd say a similar top line width but with much narrower soles and similar length, but more forgiving and better feeling. Much better turf interaction and forgiveness. Also, MUCH better transition design from longer to shorter clubs. Really you think these compare to the TE in topline thickness? Thats great to hear. I love a thin topline with the forgiveness of something meatier. I was going back and forth between the TS1 and TE when i chose my last set. I just didnt prefer the shiny finish, weak lofts, and rear aesthetics of the TE. Appreciate the information. I suspect there will be a shiny new club head landing on my doorstep sooner then the wife wants. GolfSpy SAM and azstu324 1 1 Quote Driver: Ben Hogan GS53 4W: Maltby KE4 2i: Maltby KE4 FDI 4-PW: Maltby TS-1 - C-Taper 120g 50,54,58: Maltby TSW Putter: L.A.B. DF2.1 Accra Shaft 2023 Forum Testers - L.A.B. Putters Ball: Mixed prefer ProV1 or Snell Handicap: 9.2 - Best Score: 72 (E) Springdale CC, Canton NC -2022 2020 Forum Tester - Ben Hogan GS53 Driver Link to comment Share on other sites More sharing options...
azstu324 Posted May 25, 2023 Author Share Posted May 25, 2023 1 minute ago, pozzit said: Really you think these compare to the TE in topline thickness? Thats great to hear. I love a thin topline with the forgiveness of something meatier. I was going back and forth between the TS1 and TE when i chose my last set. I just didnt prefer the shiny finish, weak lofts, and rear aesthetics of the TE. Appreciate the information. I suspect there will be a shiny new club head landing on my doorstep sooner then the wife wants. In case you missed it, I updated my post with a comparison pic of the DBM and TS4. Hopefully that is helpful GolfSpy SAM 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.