Jmikecpa Posted December 5, 2020 Share Posted December 5, 2020 I like this idea I just need to cover piping that is going in my closet so why waste the metal if I can build it and paint it to match my wall and not have to worry about it. I never thought of this thanks jMikeWelcome. I didn’t either until YouTube. I saw a video on it and said well I can build these at a fraction of the cost. Took about three hours and was pretty much all straight cuts with the miter saw and table saw. Sent from my iPhone using Tapatalk tommc23, MattF and Rickp 3 Quote WITB 2024 Driver: Qi10 LS 9* Ltd. HZRDUS RDX Smoke Blue 60 TX Fairway: BRNR Mini Driver Copper 13.5* Evenflow Black 75g 6.5 Fairway: Sim 19* HZRDUS Red 75g 6.5 Hybrid: 0317x 22* KBS Proto 95x Irons: X Forged CB 5 - PW MMT 105 TX Wedges: Jaws Raw 50*, 54* & 58* TTDG "OG" Spinner Putter: Toulon Madison BGT Fire 34.75" Ball: Z Star Diamond Link to comment Share on other sites More sharing options...
Jmikecpa Posted December 5, 2020 Share Posted December 5, 2020 Final finished project. Sent from my iPhone using Tapatalk Shapotomous, sirchunksalot, Rickp and 3 others 6 Quote WITB 2024 Driver: Qi10 LS 9* Ltd. HZRDUS RDX Smoke Blue 60 TX Fairway: BRNR Mini Driver Copper 13.5* Evenflow Black 75g 6.5 Fairway: Sim 19* HZRDUS Red 75g 6.5 Hybrid: 0317x 22* KBS Proto 95x Irons: X Forged CB 5 - PW MMT 105 TX Wedges: Jaws Raw 50*, 54* & 58* TTDG "OG" Spinner Putter: Toulon Madison BGT Fire 34.75" Ball: Z Star Diamond Link to comment Share on other sites More sharing options...
Rickp Posted December 6, 2020 Share Posted December 6, 2020 Final finished project. Sent from my iPhone using TapatalkNice job, looks better than the standard metal baseboard.Sent from my iPhone using MyGolfSpy sirchunksalot 1 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
bens197 Posted December 6, 2020 Share Posted December 6, 2020 Day one done. Set and leveled the base cabinets. Painted the fireplace and installed perimeter base and quarter round shoe. Tomorrow we build the cabinet tops and upper shelves. MattF, sirchunksalot, Shapotomous and 3 others 6 Quote Titleist TSi3 Fujikura Speeder NX Blue 60X TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X Titleist U505 2 Tensei 1K Black 85 X Titleist T100 4-P Nippon Modus 3 120X PING S159 50-S 55-H 59-T DG X100 Vokey SM8 50, SM9 54 & 60 Nippon Modus 3 120s L.A.B. MEZZ Max Broom Accra 47" 79.5* Srixon Z-Star XV Currently testing the 2024 PING S159 wedges… https://forum.mygolfspy.com/topic/63483-testers-announced-ping-s159-wedges/ Was testing, still loving the 2023 Titleist T100 Irons 4-P https://forum.mygolfspy.com/topic/60456-titleist-t-series-irons-2023-forum-review/ Link to comment Share on other sites More sharing options...
tommc23 Posted December 6, 2020 Share Posted December 6, 2020 Got all the drywall in my one room done except for the closet. Going to finish that tomorrow we installed the closet door today so I can finish this easily before my dad shows up and we start to run the baseboards for my heating. Will post pictures once the room is done. Rickp, MattF and Shapotomous 3 Quote Link to comment Share on other sites More sharing options...
tony@CIC Posted December 7, 2020 Share Posted December 7, 2020 Final finished project. Sent from my iPhone using TapatalkThat looks a lot better than metal ones. Sent from my iPad using MyGolfSpy Rickp 1 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
bens197 Posted December 8, 2020 Share Posted December 8, 2020 Cabinet tops are wrapping up. We use 3/4” 4’x8’oak veneer, attach it to a base of 3/4” pressboard which was just some leftover material. It gives us the taller and beefier top without the extra cost. Once that’s glued and nailed, we put an edge band around the face and let that bond MattF, tommc23, tony@CIC and 6 others 9 Quote Titleist TSi3 Fujikura Speeder NX Blue 60X TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X Titleist U505 2 Tensei 1K Black 85 X Titleist T100 4-P Nippon Modus 3 120X PING S159 50-S 55-H 59-T DG X100 Vokey SM8 50, SM9 54 & 60 Nippon Modus 3 120s L.A.B. MEZZ Max Broom Accra 47" 79.5* Srixon Z-Star XV Currently testing the 2024 PING S159 wedges… https://forum.mygolfspy.com/topic/63483-testers-announced-ping-s159-wedges/ Was testing, still loving the 2023 Titleist T100 Irons 4-P https://forum.mygolfspy.com/topic/60456-titleist-t-series-irons-2023-forum-review/ Link to comment Share on other sites More sharing options...
Shapotomous Posted December 8, 2020 Share Posted December 8, 2020 3 hours ago, bens197 said: Cabinet tops are wrapping up. We use 3/4” 4’x8’oak veneer, attach it to a base of 3/4” pressboard which was just some leftover material. It gives us the taller and beefier top without the extra cost. Once that’s glued and nailed, we put an edge band around the face and let that bond Nice work there, that takes skill and patience and the right tools help a bit also! I see some serious woodworking gear in that pic. Besides the table saw and jointer I think I see a band saw. Got any pics of the shop you care to share? MattF, bens197 and tony@CIC 3 Quote Modern Bag: G410 LST 10.5*, Hzrdus Smoke RDX 6.5 Flex; 915F 3w, Diamana S+ 70 S flex; Snake Eyes 18* 2h, 23* 4h & 27* 5h; JPX 900 Forged 6 - PW, PX LZ 6.0; Edison 2.0 49*, 53*, 57* KBS Tour 120 S; Heppler Fetch; Ball - MTB-X; Bag - Jones MyGolfSpy Edition! Shot Scope H4, MG600 Rangefinder Classic Bag: Driver - Persimmon; 3w - Speed Slot; 5w - Tour Block; 3 - pw - Dynapower; sw - Ram Tom Watson; putter - bullseye standard or flange. Link to comment Share on other sites More sharing options...
bens197 Posted December 8, 2020 Share Posted December 8, 2020 14 minutes ago, Shapotomous said: Nice work there, that takes skill and patience and the right tools help a bit also! I see some serious woodworking gear in that pic. Besides the table saw and jointer I think I see a band saw. Got any pics of the shop you care to share? Thank you. My father has had a wood shop as a side gig for 45 years. As I’ve grown, it’s been a gift to learn from him. I don’t have any pictures but it’s pretty much everything we’d need to built cabinets, counters and furniture. Shapotomous, tommc23, MattF and 1 other 4 Quote Titleist TSi3 Fujikura Speeder NX Blue 60X TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X Titleist U505 2 Tensei 1K Black 85 X Titleist T100 4-P Nippon Modus 3 120X PING S159 50-S 55-H 59-T DG X100 Vokey SM8 50, SM9 54 & 60 Nippon Modus 3 120s L.A.B. MEZZ Max Broom Accra 47" 79.5* Srixon Z-Star XV Currently testing the 2024 PING S159 wedges… https://forum.mygolfspy.com/topic/63483-testers-announced-ping-s159-wedges/ Was testing, still loving the 2023 Titleist T100 Irons 4-P https://forum.mygolfspy.com/topic/60456-titleist-t-series-irons-2023-forum-review/ Link to comment Share on other sites More sharing options...
tony@CIC Posted December 8, 2020 Share Posted December 8, 2020 6 minutes ago, bens197 said: Thank you. My father has had a wood shop as a side gig for 45 years. As I’ve grown, it’s been a gift to learn from him. I don’t have any pictures but it’s pretty much everything we’d need to built cabinets, counters and furniture. I envy you and anyone that has those fine woodworking skills. Kenny B, Shapotomous, sirchunksalot and 1 other 4 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
bens197 Posted December 8, 2020 Share Posted December 8, 2020 35 minutes ago, tony@CIC said: I envy you and anyone that has those fine woodworking skills. Thanks but I have a LOT left to learn. Dad is turning 68 this year and I want to squeeze as much knowledge as possible from him in these coming years. MattF, tommc23, tony@CIC and 1 other 2 2 Quote Titleist TSi3 Fujikura Speeder NX Blue 60X TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X Titleist U505 2 Tensei 1K Black 85 X Titleist T100 4-P Nippon Modus 3 120X PING S159 50-S 55-H 59-T DG X100 Vokey SM8 50, SM9 54 & 60 Nippon Modus 3 120s L.A.B. MEZZ Max Broom Accra 47" 79.5* Srixon Z-Star XV Currently testing the 2024 PING S159 wedges… https://forum.mygolfspy.com/topic/63483-testers-announced-ping-s159-wedges/ Was testing, still loving the 2023 Titleist T100 Irons 4-P https://forum.mygolfspy.com/topic/60456-titleist-t-series-irons-2023-forum-review/ Link to comment Share on other sites More sharing options...
tommc23 Posted December 8, 2020 Share Posted December 8, 2020 2 hours ago, bens197 said: Thanks but I have a LOT left to learn. Dad is turning 68 this year and I want to squeeze as much knowledge as possible from him in these coming years. My dad is 62 I'm doing that with the remodeling I've done at their house and now mine. bens197, Shapotomous and MattF 3 Quote Link to comment Share on other sites More sharing options...
bens197 Posted December 8, 2020 Share Posted December 8, 2020 5 minutes ago, tommc23 said: My dad is 62 I'm doing that with the remodeling I've done at their house and now mine. It's the best apprenticeship I could imagine. I've been following your work and its really setting you up nicely for the future. I hope for the same. MattF, Shapotomous and tommc23 3 Quote Titleist TSi3 Fujikura Speeder NX Blue 60X TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X Titleist U505 2 Tensei 1K Black 85 X Titleist T100 4-P Nippon Modus 3 120X PING S159 50-S 55-H 59-T DG X100 Vokey SM8 50, SM9 54 & 60 Nippon Modus 3 120s L.A.B. MEZZ Max Broom Accra 47" 79.5* Srixon Z-Star XV Currently testing the 2024 PING S159 wedges… https://forum.mygolfspy.com/topic/63483-testers-announced-ping-s159-wedges/ Was testing, still loving the 2023 Titleist T100 Irons 4-P https://forum.mygolfspy.com/topic/60456-titleist-t-series-irons-2023-forum-review/ Link to comment Share on other sites More sharing options...
Shapotomous Posted December 10, 2020 Share Posted December 10, 2020 It's the year of the water heater....this one at the church parsonage is the third one I've replaced this year. I'm getting more efficient though, 1.5 last evening hours included replacing a couple sketchy sections of pipe and I didn't even need a second trip to the hardware store to get another fitting I forgot the first time! And no pipe drips when I was done! Rickp, MattF and tommc23 3 Quote Modern Bag: G410 LST 10.5*, Hzrdus Smoke RDX 6.5 Flex; 915F 3w, Diamana S+ 70 S flex; Snake Eyes 18* 2h, 23* 4h & 27* 5h; JPX 900 Forged 6 - PW, PX LZ 6.0; Edison 2.0 49*, 53*, 57* KBS Tour 120 S; Heppler Fetch; Ball - MTB-X; Bag - Jones MyGolfSpy Edition! Shot Scope H4, MG600 Rangefinder Classic Bag: Driver - Persimmon; 3w - Speed Slot; 5w - Tour Block; 3 - pw - Dynapower; sw - Ram Tom Watson; putter - bullseye standard or flange. Link to comment Share on other sites More sharing options...
Jmikecpa Posted December 10, 2020 Share Posted December 10, 2020 It's the best apprenticeship I could imagine. I've been following your work and its really setting you up nicely for the future. I hope for the same.It is the best apprenticeship you will ever have. My Dad passed about 7 years ago and I spent my early life working with him learning the trades, mostly plumbing but framing and basic carpentry as well. Can’t tell you how many thousands of dollars that has saved me over the years. Sent from my iPhone using Tapatalk bens197, tony@CIC, THEZIPR23 and 2 others 4 1 Quote WITB 2024 Driver: Qi10 LS 9* Ltd. HZRDUS RDX Smoke Blue 60 TX Fairway: BRNR Mini Driver Copper 13.5* Evenflow Black 75g 6.5 Fairway: Sim 19* HZRDUS Red 75g 6.5 Hybrid: 0317x 22* KBS Proto 95x Irons: X Forged CB 5 - PW MMT 105 TX Wedges: Jaws Raw 50*, 54* & 58* TTDG "OG" Spinner Putter: Toulon Madison BGT Fire 34.75" Ball: Z Star Diamond Link to comment Share on other sites More sharing options...
bens197 Posted December 10, 2020 Share Posted December 10, 2020 1 hour ago, Shapotomous said: It's the year of the water heater....this one at the church parsonage is the third one I've replaced this year. I'm getting more efficient though, 1.5 last evening hours included replacing a couple sketchy sections of pipe and I didn't even need a second trip to the hardware store to get another fitting I forgot the first time! And no pipe drips when I was done! Thats some good time! Do you use shark bites or solder? Quote Titleist TSi3 Fujikura Speeder NX Blue 60X TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X Titleist U505 2 Tensei 1K Black 85 X Titleist T100 4-P Nippon Modus 3 120X PING S159 50-S 55-H 59-T DG X100 Vokey SM8 50, SM9 54 & 60 Nippon Modus 3 120s L.A.B. MEZZ Max Broom Accra 47" 79.5* Srixon Z-Star XV Currently testing the 2024 PING S159 wedges… https://forum.mygolfspy.com/topic/63483-testers-announced-ping-s159-wedges/ Was testing, still loving the 2023 Titleist T100 Irons 4-P https://forum.mygolfspy.com/topic/60456-titleist-t-series-irons-2023-forum-review/ Link to comment Share on other sites More sharing options...
Shapotomous Posted December 10, 2020 Share Posted December 10, 2020 33 minutes ago, bens197 said: Thats some good time! Do you use shark bites or solder? I used shark bites to get from the existing copper to CPVC in the replacement sections of pipe and I did have to solder where I re-used a 1/4 turn valve in a different spot. I used the threaded SS braided supply lines to go from the tank because of course the fittings on the new tank don't line up and are a different height than the old tank. bens197, tony@CIC, MattF and 1 other 4 Quote Modern Bag: G410 LST 10.5*, Hzrdus Smoke RDX 6.5 Flex; 915F 3w, Diamana S+ 70 S flex; Snake Eyes 18* 2h, 23* 4h & 27* 5h; JPX 900 Forged 6 - PW, PX LZ 6.0; Edison 2.0 49*, 53*, 57* KBS Tour 120 S; Heppler Fetch; Ball - MTB-X; Bag - Jones MyGolfSpy Edition! Shot Scope H4, MG600 Rangefinder Classic Bag: Driver - Persimmon; 3w - Speed Slot; 5w - Tour Block; 3 - pw - Dynapower; sw - Ram Tom Watson; putter - bullseye standard or flange. Link to comment Share on other sites More sharing options...
Rickp Posted December 10, 2020 Share Posted December 10, 2020 One of the hinges on the door between washer/dryer room & garage pulled out of the wall. The door is a solid wood. The 4 screws were 3/8” long, barely holding in the wood frame. Luckily I keep all “leftover stuff” from over the years and redid the flat head wood screws w 4 decent length replacement. House is only 6 years old should be better than that.Sent from my iPhone using MyGolfSpy Shapotomous, tony@CIC, GolfSpy_SHARK and 1 other 4 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
tommc23 Posted December 10, 2020 Share Posted December 10, 2020 Got one room with drywall up got another wall in the other room done I can have this done by the weekend if I don't slack off any more MattF, Shapotomous, Rickp and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Jmikecpa Posted December 11, 2020 Share Posted December 11, 2020 My basement has a French drain and over the last year started taking on water again. Started the drain cleaning and repairs today and can’t figure out why they would install it without clean outs??? Took me two hours to install the first clean out and about an hour to flush half of it. Also discovered that one of the pipes going into the sump well is pitched up half an inch or so. That is a project for tomorrow. Sent from my iPhone using Tapatalk MattF and Rickp 2 Quote WITB 2024 Driver: Qi10 LS 9* Ltd. HZRDUS RDX Smoke Blue 60 TX Fairway: BRNR Mini Driver Copper 13.5* Evenflow Black 75g 6.5 Fairway: Sim 19* HZRDUS Red 75g 6.5 Hybrid: 0317x 22* KBS Proto 95x Irons: X Forged CB 5 - PW MMT 105 TX Wedges: Jaws Raw 50*, 54* & 58* TTDG "OG" Spinner Putter: Toulon Madison BGT Fire 34.75" Ball: Z Star Diamond Link to comment Share on other sites More sharing options...
tony@CIC Posted December 11, 2020 Share Posted December 11, 2020 Got one room with drywall up got another wall in the other room done I can have this done by the weekend if I don't slack off any moreNice. Let us know how you feel after mudding and sanding. BTW we haven't seen a pups update. Are they all sold? Sent from my iPad using MyGolfSpy Rickp 1 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
tommc23 Posted December 12, 2020 Share Posted December 12, 2020 1 hour ago, tony@CIC said: Nice. Let us know how you feel after mudding and sanding. BTW we haven't seen a pups update. Are they all sold? Sent from my iPad using MyGolfSpy All but 1 pup I've been doing videos on YouTube for my owners. Rickp and MattF 2 Quote Link to comment Share on other sites More sharing options...
tony@CIC Posted December 12, 2020 Share Posted December 12, 2020 All but 1 pup I've been doing videos on YouTube for my owners. [/url] Boy have they grown. Nothing cuter than pups playing. Thanks for passing along the videoSent from my iPad using MyGolfSpy Rickp and tommc23 2 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
tommc23 Posted December 14, 2020 Share Posted December 14, 2020 My custom sized closet door I ordered came in today and will work perfectly. Hanging more drywall tomorrow then hoping to start the tape and spackle process next week GolfSpy_SHARK, Shapotomous, bens197 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
tony@CIC Posted December 14, 2020 Share Posted December 14, 2020 Tom, Remember when it comes to mudding - as we would call it in the Midwest, less is more. Also check into power drywall sanders that have a vacuum attachment. Both tool rental stores along with Home Depot have them. bens197, MattF, Rickp and 2 others 5 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
tommc23 Posted December 14, 2020 Share Posted December 14, 2020 9 hours ago, tony@CIC said: Tom, Remember when it comes to mudding - as we would call it in the Midwest, less is more. Also check into power drywall sanders that have a vacuum attachment. Both tool rental stores along with Home Depot have them. Already did the rental place two miles from me has one at a good cheap rental price. Same place I rented the drywall lift from. Thanks for the mention my dad is on top of me with that stuff. Rickp, Shapotomous, tony@CIC and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Jmikecpa Posted December 14, 2020 Share Posted December 14, 2020 Installed four clean outs in the French drain and flushed it with a hose. Rained all day today and so far no water in the basement...yet. Also fixed some pitch issues with the sump wells that I assume came with settling over time. The hydro jet attachment came last night so will be giving them a good cleaning tomorrow. Sent from my iPhone using Tapatalk Shapotomous, StrokerAce, tommc23 and 3 others 6 Quote WITB 2024 Driver: Qi10 LS 9* Ltd. HZRDUS RDX Smoke Blue 60 TX Fairway: BRNR Mini Driver Copper 13.5* Evenflow Black 75g 6.5 Fairway: Sim 19* HZRDUS Red 75g 6.5 Hybrid: 0317x 22* KBS Proto 95x Irons: X Forged CB 5 - PW MMT 105 TX Wedges: Jaws Raw 50*, 54* & 58* TTDG "OG" Spinner Putter: Toulon Madison BGT Fire 34.75" Ball: Z Star Diamond Link to comment Share on other sites More sharing options...
bens197 Posted December 16, 2020 Share Posted December 16, 2020 Cabinet tops are stained and set. Currently building the cabinet upper shelves as this project moves forward. I hope to have them installed tomorrow and then we'll get the trim squared away. Yesterday we finished installing two new light fixtures and painted the room. Rickp, tommc23, Shapotomous and 3 others 6 Quote Titleist TSi3 Fujikura Speeder NX Blue 60X TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X Titleist U505 2 Tensei 1K Black 85 X Titleist T100 4-P Nippon Modus 3 120X PING S159 50-S 55-H 59-T DG X100 Vokey SM8 50, SM9 54 & 60 Nippon Modus 3 120s L.A.B. MEZZ Max Broom Accra 47" 79.5* Srixon Z-Star XV Currently testing the 2024 PING S159 wedges… https://forum.mygolfspy.com/topic/63483-testers-announced-ping-s159-wedges/ Was testing, still loving the 2023 Titleist T100 Irons 4-P https://forum.mygolfspy.com/topic/60456-titleist-t-series-irons-2023-forum-review/ Link to comment Share on other sites More sharing options...
bens197 Posted December 18, 2020 Share Posted December 18, 2020 Today was supposed to be a hang crown moulding day. After putting up about 30 LF I noticed my slop sink basin was full of water. F. Here’s some free advice for everyone. Don’t throw baby wipes down the toilet. I’d like to thank the extra scoop I added to the four cups of my Tim Horton’s coffee this morning. So it was a detour. Here’s the crown above the shelves we just finished yesterday. The second photo is the rented snake doing its thing. It ended up being a good bit of preventative maintenance as well. MattF, tony@CIC, tommc23 and 1 other 4 Quote Titleist TSi3 Fujikura Speeder NX Blue 60X TaylorMade SIM2 3 wood Fujilkura Ventus Blue 7-X Titleist U505 2 Tensei 1K Black 85 X Titleist T100 4-P Nippon Modus 3 120X PING S159 50-S 55-H 59-T DG X100 Vokey SM8 50, SM9 54 & 60 Nippon Modus 3 120s L.A.B. MEZZ Max Broom Accra 47" 79.5* Srixon Z-Star XV Currently testing the 2024 PING S159 wedges… https://forum.mygolfspy.com/topic/63483-testers-announced-ping-s159-wedges/ Was testing, still loving the 2023 Titleist T100 Irons 4-P https://forum.mygolfspy.com/topic/60456-titleist-t-series-irons-2023-forum-review/ Link to comment Share on other sites More sharing options...
tony@CIC Posted December 18, 2020 Share Posted December 18, 2020 Today was supposed to be a hang crown moulding day. After putting up about 30 LF I noticed my slop sink basin was full of water. F. Here’s some free advice for everyone. Don’t throw baby wipes down the toilet. I’d like to thank the extra scoop I added to the four cups of my Tim Horton’s coffee this morning. So it was a detour. Here’s the crown above the shelves we just finished yesterday. The second photo is the rented snake doing its thing. It ended up being a good bit of preventative maintenance as well. Looking good - well not the drain. That sounds like a messy and unpleasant job. bens197, Rickp and MattF 3 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.