Jump to content
Testers Wanted! Callaway Ai Smoke Drivers! ×

What Have You Built Recently?


Recommended Posts

4 minutes ago, GolfSpy_APH said:

Toura Set of wedges nearly done with the build. Took my time today and pulled, prepped and cut the shafts. Installed the heads and ferrules. Will do a tidy up on them tomorrow. 

Grips will be put on as well. 

Other project is refinishing the set of Cobra AMP Cell Pro irons. Doing the whole thing with those, need get acetone to remove the paint and get started on that. 

Also have an awesome Star Grip air compressor gun which is amazing. Been fun to use that!

PXL_20231229_145209803.MP-1.jpg

PXL_20231229_150833348.MP-1.jpg

PXL_20240104_200928071.jpg

PXL_20240106_081639949.MP.jpg

PXL_20240106_120810814.jpg

Those are looking good Jamie! 

Link to comment
Share on other sites

7 minutes ago, sirchunksalot said:

Those are looking good Jamie! 

The wedges are so pretty. With the Black KBS shafts they are truly stunning.

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

2 minutes ago, sirchunksalot said:

They are, and I love the ferrules you picked out to compliment the look. 

I have two sets, the white and grey and white and blue and was really torn between which ones to put on. 

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

24 minutes ago, GolfSpy_APH said:

Toura Set of wedges nearly done with the build. Took my time today and pulled, prepped and cut the shafts. Installed the heads and ferrules. Will do a tidy up on them tomorrow. 

Grips will be put on as well. 

Other project is refinishing the set of Cobra AMP Cell Pro irons. Doing the whole thing with those, need get acetone to remove the paint and get started on that. 

Also have an awesome Star Grip air compressor gun which is amazing. Been fun to use that!

PXL_20231229_145209803.MP-1.jpg

PXL_20231229_150833348.MP-1.jpg

PXL_20240104_200928071.jpg

PXL_20240106_081639949.MP.jpg

PXL_20240106_120810814.jpg

Those wedges are gorgeous!

TaylorMade SIM 2 Max Driver

TaylorMade Stealth 3 wood

Titleist U510 Hybrid (3H)

TaylorMade Tour Preferred CB Irons

Vokey SM8 Wedges (52/56/60)

Odyssey Ai-ONE 7S Putter

Link to comment
Share on other sites

7 minutes ago, GolfSpy_APH said:

The wedges are so pretty. With the Black KBS shafts they are truly stunning.

Have to agree, those look really sleek! I am now regretting my decision to sell my black/black wedge setup and move to brushed steel 😅

Also, I really like the color you went with on the grips/ferrules on the irons. Happen to have a link to the grips?

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

17 minutes ago, TSauer said:

Have to agree, those look really sleek! I am now regretting my decision to sell my black/black wedge setup and move to brushed steel 😅

Also, I really like the color you went with on the grips/ferrules on the irons. Happen to have a link to the grips?

https://www.amazon.de/-/en/SAPLIZE-Rubber-Grips-Standard-Medium/dp/B094DSH4Y6

Hopefully it will take you to the US site. It is the Saplize burnt orange set. 

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

3 minutes ago, GolfSpy_APH said:

https://www.amazon.de/-/en/SAPLIZE-Rubber-Grips-Standard-Medium/dp/B094DSH4Y6

Hopefully it will take you to the US site. It is the Saplize burnt orange set. 

Thanks! For some reason I thought it was more of a bronze-ish color that matched your Mezz. 

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

Just now, TSauer said:

Thanks! For some reason I thought it was more of a bronze-ish color that matched your Mezz. 

Not quite, definitely inbetween the orange and the brown. I'll try and get some photos with more lighting for better colors. 

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

1 hour ago, GolfSpy_APH said:

Toura Set of wedges nearly done with the build. Took my time today and pulled, prepped and cut the shafts. Installed the heads and ferrules. Will do a tidy up on them tomorrow. 

Grips will be put on as well. 

Other project is refinishing the set of Cobra AMP Cell Pro irons. Doing the whole thing with those, need get acetone to remove the paint and get started on that. 

Also have an awesome Star Grip air compressor gun which is amazing. Been fun to use that!

PXL_20231229_145209803.MP-1.jpg

PXL_20231229_150833348.MP-1.jpg

PXL_20240104_200928071.jpg

PXL_20240106_081639949.MP.jpg

PXL_20240106_120810814.jpg

Those wedges are sick!

:callaway-small: Paradym TD Driver w/ Ventus Blue 6S

:ping-small: 3W

:srixon-small: MKII ZX 5's (4-6) w/ KBS Tour V

:srixon-small: MKII ZX 7's (7-PW) w/ KBS Tour V

:titleist-small: Vokey Wedges 50* 54* 58*

:L.A.B.: DF2.1 Putter

Link to comment
Share on other sites

Just bought this "oldie bit goodie" Taylormade 300 Series 7 wood in "like new" condition, and reshafted it with a senior shaft.  It should plug a gap in my bag nicely......will try it out inFlorida this coming week.....

image.png.b1cc62ae83316eb2cd332c26f9e4c26e.png

Driver:  Ping G, 12*, Senior Flex

Woods:  Orlimar Trimetal +, 20* and 26*  /Taylormade 300 Series 23* 

Hybrid:  Maltby STi, 24*

Irons:  Maltby PTM, 6-PW

Wedges:  Indi SuperGap 49*  Maltby M-Series 54* and 58*

Putter:  Maltby PTM-5 mallet

Link to comment
Share on other sites

  • 2 weeks later...
30 minutes ago, GolfSpy_APH said:

Finally finished putting these together. Need to do a bit of finishing touches but am happy with how these turned out!

 

PXL_20240121_102812105.MP.jpg

PXL_20240121_102547786.jpg

PXL_20240121_102543582.MP.jpg

PXL_20240121_102513625.jpg

PXL_20240121_102504790.jpg

PXL_20240121_102433734.MP.jpg

PXL_20240121_102424579.jpg

PXL_20240121_102257985.jpg

PXL_20240121_102407204.jpg

PXL_20240121_102243903.jpg

PXL_20240121_102221022.jpg

PXL_20240121_102204049.MP.jpg

PXL_20240121_102022116.jpg

Like the color combo!  

:callaway-small: Paradym TD Driver w/ Ventus Blue 6S

:ping-small: 3W

:srixon-small: MKII ZX 5's (4-6) w/ KBS Tour V

:srixon-small: MKII ZX 7's (7-PW) w/ KBS Tour V

:titleist-small: Vokey Wedges 50* 54* 58*

:L.A.B.: DF2.1 Putter

Link to comment
Share on other sites

9 minutes ago, Josh Parker said:

Like the color combo!  

Las thing I need to do is strip the paint from the heads (wanted to do it before installing everything, but supply was an issue) and then do a paint fill for the different spots. That is all TBD. 

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

3 minutes ago, GolfSpy_APH said:

Las thing I need to do is strip the paint from the heads (wanted to do it before installing everything, but supply was an issue) and then do a paint fill for the different spots. That is all TBD. 

They look awesome and I agree, paint fill would top them off! 

:callaway-small: Paradym TD Driver w/ Ventus Blue 6S

:ping-small: 3W

:srixon-small: MKII ZX 5's (4-6) w/ KBS Tour V

:srixon-small: MKII ZX 7's (7-PW) w/ KBS Tour V

:titleist-small: Vokey Wedges 50* 54* 58*

:L.A.B.: DF2.1 Putter

Link to comment
Share on other sites

4 hours ago, GolfSpy_APH said:

Finally finished putting these together. Need to do a bit of finishing touches but am happy with how these turned out!

 

PXL_20240121_102812105.MP.jpg

PXL_20240121_102547786.jpg

PXL_20240121_102543582.MP.jpg

PXL_20240121_102513625.jpg

PXL_20240121_102504790.jpg

PXL_20240121_102433734.MP.jpg

PXL_20240121_102424579.jpg

PXL_20240121_102257985.jpg

PXL_20240121_102407204.jpg

PXL_20240121_102243903.jpg

PXL_20240121_102221022.jpg

PXL_20240121_102204049.MP.jpg

PXL_20240121_102022116.jpg

The orange in the ferrules and grips are gorgeous!

Where do you typically get your clubheads from?

TaylorMade SIM 2 Max Driver

TaylorMade Stealth 3 wood

Titleist U510 Hybrid (3H)

TaylorMade Tour Preferred CB Irons

Vokey SM8 Wedges (52/56/60)

Odyssey Ai-ONE 7S Putter

Link to comment
Share on other sites

6 hours ago, TJ Hall said:

The orange in the ferrules and grips are gorgeous!

Where do you typically get your clubheads from?

I got this set used. It included the shafts and grips etc. The grips had seen better days and the ferrules were slipping so needed to be redone. I am really happy with the look of them. They look fantastic in the bag!

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

Mizuno MX-25 3-p I found the heads for 60 bucks. Cleveland wedges 52,56,60 refinished with a blueing technique. Shafts installed KBS C-taper s+ soft stepped, with pure grip grips.

 

IMG_2423.jpeg

IMG_2422.jpeg

IMG_2478.jpeg

IMG_2530.jpeg

IMG_2602.jpeg

IMG_2598.jpeg

Edited by Thegolferdude

Golf one of the greatest games been playing for most of my life.

Link to comment
Share on other sites

  • 3 weeks later...

Put together a couple of things. The clubs have been put together for a while now but recently I decided to give them a subtle new look.. and feel. 

Not BB&F, but these are the custom ferrules  from Golfworks. I just wanted clean and basic and I think these work perfectly. 

20240213_094144.jpg.002e591e1827de5af4666a0c01549df1.jpg

Also wanted to try out some full cord grips for the first time. So far I'm really liking these Royal Linktechs. Also think they spruce up the set a little. 

20240213_094239.jpg.2f0c61df52f901b498989a00543e5117.jpg

Lastly, this is my DIY club ruler that I built. It works awesome. I added a few touches to help lock the club in place correctly. 

20240213_091253.jpg.87f1095761f8d535e8ed419fadf0ed39.jpg

20240213_091307.jpg.f87421aad9ee346dc24a0a52c4a1ab1c.jpg

20240213_091355.jpg.a28c09f6158ac345c5f03ebe758aab7e.jpg

20240213_091401.jpg.4ee6205491b91edc2daa854599cde10c.jpg

20240213_091754.jpg.4086ba37c58fed111dd476aa77604210.jpg

20240213_091816.jpg.4471d323caa40da2733b5b063c687280.jpg

Edited by azstu324

   PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X
:cobra-small:  F6 3 Wood 14* / Kuro Kage Silver 65X
:cobra-small: F8 6 wood 20* / Fujikura MotoreX F3 6S

:cobra-small: RADSpeed Hybrid 24*
post-76102-0-38507100-1525284411_thumb.jpg TS1 4-GW / FCM Precision 6.5 Rifle
post-76102-0-38507100-1525284411_thumb.jpg  TSW Wedge - 56/12
:edel-golf-1:  EAS 1.0 / Grip master 2.0 

MAXFLI  Tour CG

 

 

 

 

Link to comment
Share on other sites

10 minutes ago, azstu324 said:

Put together a couple of things. The clubs have been put together for a while now but recently I decided to give them a subtle new look.. and feel. 

Not BB&F, but these are the custom ferrules  from Golfworks. I just wanted clean and basic and I think these work perfectly. 

20240213_094144.jpg.002e591e1827de5af4666a0c01549df1.jpg

Also wanted to try out some full cord grips for the first time. So far I'm really liking these Royal Linktechs. Also think they spruce up the set a little. 

20240213_094239.jpg.2f0c61df52f901b498989a00543e5117.jpg

Lastly, this is my DIY club ruler that I built. It works awesome. I added a few touches to help lock the club in place correctly. 

20240213_091253.jpg.87f1095761f8d535e8ed419fadf0ed39.jpg

20240213_091307.jpg.f87421aad9ee346dc24a0a52c4a1ab1c.jpg

20240213_091355.jpg.a28c09f6158ac345c5f03ebe758aab7e.jpg

20240213_091401.jpg.4ee6205491b91edc2daa854599cde10c.jpg

20240213_091754.jpg.4086ba37c58fed111dd476aa77604210.jpg

20240213_091816.jpg.4471d323caa40da2733b5b063c687280.jpg

Looks awesome Stu!
Nice job on the ferrules. I wish more clubs came stock with customized ferrules. 

Driver-  Cobra  Aerojet LS
Woods-
Cobra  LTD 3w 15*, 5W 19*,  F9 24* 
Irons- XXIO X (6-A)

Wedges- Callaway Jaws Raw (54/58)

Putter- Bettinardi BB56
Ball- Maxfli Tour X
Buggy- Motocaddy M7 GPS Remote Electric Caddy
Bag- Motocaddy Dry-Series

Proudly testing for 2024:

 

Link to comment
Share on other sites

3 hours ago, StrokerAce said:

Looks awesome Stu!
Nice job on the ferrules. I wish more clubs came stock with customized ferrules. 

Thanks! I'm pretty sure Golfworks will build with their custom ferrules for a slight upcharge. 

   PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X
:cobra-small:  F6 3 Wood 14* / Kuro Kage Silver 65X
:cobra-small: F8 6 wood 20* / Fujikura MotoreX F3 6S

:cobra-small: RADSpeed Hybrid 24*
post-76102-0-38507100-1525284411_thumb.jpg TS1 4-GW / FCM Precision 6.5 Rifle
post-76102-0-38507100-1525284411_thumb.jpg  TSW Wedge - 56/12
:edel-golf-1:  EAS 1.0 / Grip master 2.0 

MAXFLI  Tour CG

 

 

 

 

Link to comment
Share on other sites

Golfworks is building my TS1-IM with the red/white/blue 3 ring custom ferrules for a nominal fee. 

image.png.bd7519ecc7d68e870840f44da298da5a.png

:mizuno-small: STZ 230 9.5* ➖ PinHawk SLF 16* ➖ :mizuno-small: STZ 230 Hybrid 21.25* ➖ MALTBY TS1-IM 5-GW ➖ :benhogan-small: Equalizer II 54* ➖ :ping-small: Glide 4.0 (S) 58* ➖ L.A.B. Directed Force 2.1 
Maxfli Tour X Official Review -- https://forum.mygolfspy.com/topic/63068-testers-announced-maxfli-tour-x-golf-balls-with-max-align-technology/?do=findComment&comment=1021832

Link to comment
Share on other sites

  • 3 weeks later...
On 2/13/2024 at 11:45 AM, azstu324 said:

Put together a couple of things. The clubs have been put together for a while now but recently I decided to give them a subtle new look.. and feel. 

Not BB&F, but these are the custom ferrules  from Golfworks. I just wanted clean and basic and I think these work perfectly. 

20240213_094144.jpg.002e591e1827de5af4666a0c01549df1.jpg

Also wanted to try out some full cord grips for the first time. So far I'm really liking these Royal Linktechs. Also think they spruce up the set a little. 

20240213_094239.jpg.2f0c61df52f901b498989a00543e5117.jpg

Lastly, this is my DIY club ruler that I built. It works awesome. I added a few touches to help lock the club in place correctly. 

20240213_091253.jpg.87f1095761f8d535e8ed419fadf0ed39.jpg

20240213_091307.jpg.f87421aad9ee346dc24a0a52c4a1ab1c.jpg

20240213_091355.jpg.a28c09f6158ac345c5f03ebe758aab7e.jpg

20240213_091401.jpg.4ee6205491b91edc2daa854599cde10c.jpg

20240213_091754.jpg.4086ba37c58fed111dd476aa77604210.jpg

20240213_091816.jpg.4471d323caa40da2733b5b063c687280.jpg

Those look great and I really like the black/white/silver ferrules! I also like the custom ruler setup; what a great idea! Consistent measurements every time!

WITB (link to detailed post here):

Driver:  Cobragolflogo.png.602fb363b272aeca0ae57ab591da02de.png LTDx 9* (ProjectX BlueSmoke Stiff)

Fairway metals:  TITLEIST_logo_15px.png.86858562876473681822bdce0336ecd4.png 3W TSR2 14.25* (ProjectX BlueSmoke Stiff) | PXG_Logo.png.e8b8454bf242754d2326ecb0a719cd30.png 5W Gen4 0341XF (Mitsubishi Tensei Blue 75 S)

Hybrid: PXG_Logo.png.e8b8454bf242754d2326ecb0a719cd30.png4H Gen4 0317XF (Mitsubishi Tensei Blue 75HY S)

Irons:   Sub70.png.5f7ea5565c2690f7d237f327e2e5238a.png 659 CB 5-AW (Project X Rifle 6.0)

Wedges:   Sub70.png.5f7ea5565c2690f7d237f327e2e5238a.png 286 54* & 58* (KBS Tour 120 S)

Putter:  Sub70.png.5f7ea5565c2690f7d237f327e2e5238a.png AL-6 armlock | Unofficial review here

Ball:   Vice_logo.png.282566e7be35424dbb3a5d3359e6385f.png pro drip: red & blue | MAXFLI_logo_15px.png.137df4bf59bf3628d99abc6ca08fd43f.png Tour S

Pushcart:  clicgear_logo.png.5569d627daa35e79384784c8a4e886f4.png 4.0 | '23 MGS Clicgear 4.0 Pushcart Tester | Link here

Link to comment
Share on other sites

I'm fairly new to club building/customization. I've done a few things in the past, but haven't really given them much thought. I recently cut down an armlock putter 3" and regripped it with a heavier grip. I liked the length change, but it threw off the swing weight drastically, so I ended up adding a lot of lead tape to the bottom of the putter.

Long story longer, I recently picked up a Cobra LTDx from a fellow spy and have been playing around with choking up on the shaft (it's currently 45.5 inches). I hit it the best in the simulator when I was choking up at least 1" (probably closer to 1.25"). So I'm considering shortening the club permanently and also putting on a JumboMax Tour Series XS grip (I love the firm feel and size of those grips). This means that not only would I be shortening the club, but also going from a 47g grip to a 90g grip. I don't really want the overall club weight to go up potentially 70-90g (43g in grip change, plus added weight to driver head). Do any of you who do this more often have any advice? Do I just forget the heavy JumboMax and go for an UltraLite? Also, I don't really want to re-tip the shaft, but is it advised when taking more than 1" off the shaft?

Edited by jbern
typos

WITB (link to detailed post here):

Driver:  Cobragolflogo.png.602fb363b272aeca0ae57ab591da02de.png LTDx 9* (ProjectX BlueSmoke Stiff)

Fairway metals:  TITLEIST_logo_15px.png.86858562876473681822bdce0336ecd4.png 3W TSR2 14.25* (ProjectX BlueSmoke Stiff) | PXG_Logo.png.e8b8454bf242754d2326ecb0a719cd30.png 5W Gen4 0341XF (Mitsubishi Tensei Blue 75 S)

Hybrid: PXG_Logo.png.e8b8454bf242754d2326ecb0a719cd30.png4H Gen4 0317XF (Mitsubishi Tensei Blue 75HY S)

Irons:   Sub70.png.5f7ea5565c2690f7d237f327e2e5238a.png 659 CB 5-AW (Project X Rifle 6.0)

Wedges:   Sub70.png.5f7ea5565c2690f7d237f327e2e5238a.png 286 54* & 58* (KBS Tour 120 S)

Putter:  Sub70.png.5f7ea5565c2690f7d237f327e2e5238a.png AL-6 armlock | Unofficial review here

Ball:   Vice_logo.png.282566e7be35424dbb3a5d3359e6385f.png pro drip: red & blue | MAXFLI_logo_15px.png.137df4bf59bf3628d99abc6ca08fd43f.png Tour S

Pushcart:  clicgear_logo.png.5569d627daa35e79384784c8a4e886f4.png 4.0 | '23 MGS Clicgear 4.0 Pushcart Tester | Link here

Link to comment
Share on other sites

I just bought a mint Cobra LTDx Max 10.5 degree driver head and paired it up with a UST Mamiya Helium shaft (senior flex).   I spined and floed the shaft before attaching it to the head, and played 18 holes with it yesterday.   My first couple of drives were pull hooks (my usual miss), but then I started aiming a little right and tried harder to "wait on the club head" before hitting through the ball.   This straightened the drives out a lot, but still was hitting it more left than straight.  I would say that overall I hit it LOW and slightly LEFT compared to my gamer.

When I got home yesterday I got out the torque wrench and changed from the "Standard loft / draw" setting to  "+1.5 degree/ straight."   We'll see how that goes next time out.....  If that doesn't prove to be better than my old Ping G, I'll fit it with an R shaft and give it to my 50 year old son....

Edited by Fatshot

Driver:  Ping G, 12*, Senior Flex

Woods:  Orlimar Trimetal +, 20* and 26*  /Taylormade 300 Series 23* 

Hybrid:  Maltby STi, 24*

Irons:  Maltby PTM, 6-PW

Wedges:  Indi SuperGap 49*  Maltby M-Series 54* and 58*

Putter:  Maltby PTM-5 mallet

Link to comment
Share on other sites

1 minute ago, 03trdblack said:

Nice single length build that I did. I 3D printed plastic weight screws for the heavier irons (PW and 9).

 

20240223_194820.jpg

20240223_194756.jpg

20240223_194737.jpg

Those irons are gorgeous!

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

On today’s agenda… 

IMG_5045.jpeg.1158aa1417d00f922104ae7c21d2d0e0.jpeg

Driver:            :cobra-small: Aerojet 9* | Hzrdus Black Gen 4
Fairway:         :ping-small: G410 3W 13* | Alta CB 65
Hybrid:           :titleist-small: TS2 18* | Tensei AV Blue 70 S
Hybrid:           :ping-small: iCrossover 20* | Kai'li White 80
Irons:              :taylormade-small: P790 5-PW | DG S300
Wedges:         :titleist-small: Vokey SM9 | 52, 56, 60 | DG S200
Putter:            :L.A.B.: Link.1 | Accra x LAB

--- LAB Golf Link.1 Review ---

Link to comment
Share on other sites

46 minutes ago, TSauer said:

On today’s agenda… 

IMG_5045.jpeg.1158aa1417d00f922104ae7c21d2d0e0.jpeg

Love it love it love it!

⛳🛄 as of Nov 6, 2023 (Past WITB
Driver:  :callaway-small: Paradym TD w/ GD ADDI 6X Driver Shootout! 

Wood:    :cobra-small: F7 3 wood 14.5* w/ Motore F1 Shaft

Irons:   :titleist-small: T Series - T200 5 Iron
                                          T150 6-9 Iron
                                          T100 PW/GW

Wedge:  Toura Golf - A Spec 53,37,61 degree 

Putter:  Screenshot 2023-06-02 13.10.30.png Mezz Max!

Balls:     Vice Pro Plus Drip (Blue/Orange)

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...