sirchunksalot Posted January 6 Share Posted January 6 4 minutes ago, GolfSpy_APH said: Toura Set of wedges nearly done with the build. Took my time today and pulled, prepped and cut the shafts. Installed the heads and ferrules. Will do a tidy up on them tomorrow. Grips will be put on as well. Other project is refinishing the set of Cobra AMP Cell Pro irons. Doing the whole thing with those, need get acetone to remove the paint and get started on that. Also have an awesome Star Grip air compressor gun which is amazing. Been fun to use that! Those are looking good Jamie! Pyecraft, tdroma98, OdinSnipes414 and 3 others 6 Quote Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted January 6 Author Share Posted January 6 7 minutes ago, sirchunksalot said: Those are looking good Jamie! The wedges are so pretty. With the Black KBS shafts they are truly stunning. ZJeb67, OdinSnipes414, jbern and 4 others 5 1 1 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
sirchunksalot Posted January 6 Share Posted January 6 2 minutes ago, GolfSpy_APH said: The wedges are so pretty. With the Black KBS shafts they are truly stunning. They are, and I love the ferrules you picked out to compliment the look. smartak, IndyBonzo, TJ Hall and 2 others 5 Quote Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted January 6 Author Share Posted January 6 2 minutes ago, sirchunksalot said: They are, and I love the ferrules you picked out to compliment the look. I have two sets, the white and grey and white and blue and was really torn between which ones to put on. TJ Hall, IndyBonzo, sirchunksalot and 1 other 4 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
TJ Hall Posted January 6 Share Posted January 6 24 minutes ago, GolfSpy_APH said: Toura Set of wedges nearly done with the build. Took my time today and pulled, prepped and cut the shafts. Installed the heads and ferrules. Will do a tidy up on them tomorrow. Grips will be put on as well. Other project is refinishing the set of Cobra AMP Cell Pro irons. Doing the whole thing with those, need get acetone to remove the paint and get started on that. Also have an awesome Star Grip air compressor gun which is amazing. Been fun to use that! Those wedges are gorgeous! sirchunksalot, IndyBonzo and ZJeb67 3 Quote TaylorMade SIM 2 Max Driver TaylorMade Stealth 3 wood Titleist U510 Hybrid (3H) TaylorMade Tour Preferred CB Irons Vokey SM8 Wedges (52/56/60) Odyssey Ai-ONE 7S Putter Link to comment Share on other sites More sharing options...
TSauer Posted January 6 Share Posted January 6 7 minutes ago, GolfSpy_APH said: The wedges are so pretty. With the Black KBS shafts they are truly stunning. Have to agree, those look really sleek! I am now regretting my decision to sell my black/black wedge setup and move to brushed steel Also, I really like the color you went with on the grips/ferrules on the irons. Happen to have a link to the grips? TJ Hall, ZJeb67, GolfSpy_APH and 1 other 3 1 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted January 6 Author Share Posted January 6 17 minutes ago, TSauer said: Have to agree, those look really sleek! I am now regretting my decision to sell my black/black wedge setup and move to brushed steel Also, I really like the color you went with on the grips/ferrules on the irons. Happen to have a link to the grips? https://www.amazon.de/-/en/SAPLIZE-Rubber-Grips-Standard-Medium/dp/B094DSH4Y6 Hopefully it will take you to the US site. It is the Saplize burnt orange set. sirchunksalot, TJ Hall, ZJeb67 and 2 others 5 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
TSauer Posted January 6 Share Posted January 6 3 minutes ago, GolfSpy_APH said: https://www.amazon.de/-/en/SAPLIZE-Rubber-Grips-Standard-Medium/dp/B094DSH4Y6 Hopefully it will take you to the US site. It is the Saplize burnt orange set. Thanks! For some reason I thought it was more of a bronze-ish color that matched your Mezz. sirchunksalot, IndyBonzo, ZJeb67 and 1 other 4 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted January 6 Author Share Posted January 6 Just now, TSauer said: Thanks! For some reason I thought it was more of a bronze-ish color that matched your Mezz. Not quite, definitely inbetween the orange and the brown. I'll try and get some photos with more lighting for better colors. ZJeb67, TJ Hall, TSauer and 2 others 5 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
Josh Parker Posted January 7 Share Posted January 7 1 hour ago, GolfSpy_APH said: Toura Set of wedges nearly done with the build. Took my time today and pulled, prepped and cut the shafts. Installed the heads and ferrules. Will do a tidy up on them tomorrow. Grips will be put on as well. Other project is refinishing the set of Cobra AMP Cell Pro irons. Doing the whole thing with those, need get acetone to remove the paint and get started on that. Also have an awesome Star Grip air compressor gun which is amazing. Been fun to use that! Those wedges are sick! GolfSpy_APH and IndyBonzo 2 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
Fatshot Posted January 7 Share Posted January 7 Just bought this "oldie bit goodie" Taylormade 300 Series 7 wood in "like new" condition, and reshafted it with a senior shaft. It should plug a gap in my bag nicely......will try it out inFlorida this coming week..... TJ Hall, BallsLeon, IndyBonzo and 1 other 4 Quote Driver: Ping G, 12*, Senior Flex Woods: Orlimar Trimetal +, 20* and 26* /Taylormade 300 Series 23* Hybrid: Maltby STi, 24* Irons: Maltby PTM, 6-PW Wedges: Indi SuperGap 49* Maltby M-Series 54* and 58* Putter: Maltby PTM-5 mallet Link to comment Share on other sites More sharing options...
Popular Post GolfSpy_APH Posted January 21 Author Popular Post Share Posted January 21 Finally finished putting these together. Need to do a bit of finishing touches but am happy with how these turned out! BallsLeon, Josh Parker, Nick_D and 12 others 6 2 1 6 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
Josh Parker Posted January 21 Share Posted January 21 30 minutes ago, GolfSpy_APH said: Finally finished putting these together. Need to do a bit of finishing touches but am happy with how these turned out! Like the color combo! TJ Hall, IndyBonzo and GolfSpy_APH 3 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted January 21 Author Share Posted January 21 9 minutes ago, Josh Parker said: Like the color combo! Las thing I need to do is strip the paint from the heads (wanted to do it before installing everything, but supply was an issue) and then do a paint fill for the different spots. That is all TBD. IndyBonzo, TJ Hall, jbern and 1 other 4 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
Josh Parker Posted January 21 Share Posted January 21 3 minutes ago, GolfSpy_APH said: Las thing I need to do is strip the paint from the heads (wanted to do it before installing everything, but supply was an issue) and then do a paint fill for the different spots. That is all TBD. They look awesome and I agree, paint fill would top them off! TJ Hall, IndyBonzo and GolfSpy_APH 3 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
TJ Hall Posted January 21 Share Posted January 21 4 hours ago, GolfSpy_APH said: Finally finished putting these together. Need to do a bit of finishing touches but am happy with how these turned out! The orange in the ferrules and grips are gorgeous! Where do you typically get your clubheads from? IndyBonzo, jbern and GolfSpy_APH 3 Quote TaylorMade SIM 2 Max Driver TaylorMade Stealth 3 wood Titleist U510 Hybrid (3H) TaylorMade Tour Preferred CB Irons Vokey SM8 Wedges (52/56/60) Odyssey Ai-ONE 7S Putter Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted January 21 Author Share Posted January 21 6 hours ago, TJ Hall said: The orange in the ferrules and grips are gorgeous! Where do you typically get your clubheads from? I got this set used. It included the shafts and grips etc. The grips had seen better days and the ferrules were slipping so needed to be redone. I am really happy with the look of them. They look fantastic in the bag! TJ Hall, jbern and IndyBonzo 3 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
Thegolferdude Posted January 26 Share Posted January 26 (edited) Mizuno MX-25 3-p I found the heads for 60 bucks. Cleveland wedges 52,56,60 refinished with a blueing technique. Shafts installed KBS C-taper s+ soft stepped, with pure grip grips. Edited January 26 by Thegolferdude jbern, GolfSpy_APH, TSauer and 5 others 5 2 1 Quote Golf one of the greatest games been playing for most of my life. Link to comment Share on other sites More sharing options...
azstu324 Posted February 13 Share Posted February 13 (edited) Put together a couple of things. The clubs have been put together for a while now but recently I decided to give them a subtle new look.. and feel. Not BB&F, but these are the custom ferrules from Golfworks. I just wanted clean and basic and I think these work perfectly. Also wanted to try out some full cord grips for the first time. So far I'm really liking these Royal Linktechs. Also think they spruce up the set a little. Lastly, this is my DIY club ruler that I built. It works awesome. I added a few touches to help lock the club in place correctly. Edited February 13 by azstu324 Pyecraft, Nick_D, BallsLeon and 1 other 4 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
StrokerAce Posted February 13 Share Posted February 13 10 minutes ago, azstu324 said: Put together a couple of things. The clubs have been put together for a while now but recently I decided to give them a subtle new look.. and feel. Not BB&F, but these are the custom ferrules from Golfworks. I just wanted clean and basic and I think these work perfectly. Also wanted to try out some full cord grips for the first time. So far I'm really liking these Royal Linktechs. Also think they spruce up the set a little. Lastly, this is my DIY club ruler that I built. It works awesome. I added a few touches to help lock the club in place correctly. Looks awesome Stu! Nice job on the ferrules. I wish more clubs came stock with customized ferrules. azstu324 1 Quote Driver- Cobra Aerojet LS Woods- Cobra LTD 3w 15*, 5W 19*, F9 24* Irons- XXIO X (6-A) Wedges- Callaway Jaws Raw (54/58) Putter- Bettinardi BB56 Ball- Maxfli Tour X Buggy- Motocaddy M7 GPS Remote Electric Caddy Bag- Motocaddy Dry-Series Proudly testing for 2024: Link to comment Share on other sites More sharing options...
azstu324 Posted February 13 Share Posted February 13 3 hours ago, StrokerAce said: Looks awesome Stu! Nice job on the ferrules. I wish more clubs came stock with customized ferrules. Thanks! I'm pretty sure Golfworks will build with their custom ferrules for a slight upcharge. StrokerAce 1 Quote PXG 0311 Gen 5 9°/ Fujikura MotoreX F1 6X F6 3 Wood 14* / Kuro Kage Silver 65X F8 6 wood 20* / Fujikura MotoreX F3 6S RADSpeed Hybrid 24* TS1 4-GW / FCM Precision 6.5 Rifle TSW Wedge - 56/12 EAS 1.0 / Grip master 2.0 MAXFLI Tour CG Link to comment Share on other sites More sharing options...
vandyland Posted February 13 Share Posted February 13 Golfworks is building my TS1-IM with the red/white/blue 3 ring custom ferrules for a nominal fee. jbern and azstu324 2 Quote STZ 230 9.5* PinHawk SLF 16* STZ 230 Hybrid 21.25* MALTBY TS1-IM 5-GW Equalizer II 54* Glide 4.0 (S) 58* L.A.B. Directed Force 2.1 Maxfli Tour X Official Review -- https://forum.mygolfspy.com/topic/63068-testers-announced-maxfli-tour-x-golf-balls-with-max-align-technology/?do=findComment&comment=1021832 Link to comment Share on other sites More sharing options...
jbern Posted March 1 Share Posted March 1 On 2/13/2024 at 11:45 AM, azstu324 said: Put together a couple of things. The clubs have been put together for a while now but recently I decided to give them a subtle new look.. and feel. Not BB&F, but these are the custom ferrules from Golfworks. I just wanted clean and basic and I think these work perfectly. Also wanted to try out some full cord grips for the first time. So far I'm really liking these Royal Linktechs. Also think they spruce up the set a little. Lastly, this is my DIY club ruler that I built. It works awesome. I added a few touches to help lock the club in place correctly. Those look great and I really like the black/white/silver ferrules! I also like the custom ruler setup; what a great idea! Consistent measurements every time! azstu324 and Pyecraft 2 Quote WITB (link to detailed post here): Driver: LTDx 9* (ProjectX BlueSmoke Stiff) Fairway metals: 3W TSR2 14.25* (ProjectX BlueSmoke Stiff) | 5W Gen4 0341XF (Mitsubishi Tensei Blue 75 S) Hybrid: 4H Gen4 0317XF (Mitsubishi Tensei Blue 75HY S) Irons: 659 CB 5-AW (Project X Rifle 6.0) Wedges: 286 54* & 58* (KBS Tour 120 S) Putter: AL-6 armlock | Unofficial review here Ball: pro drip: red & blue | Tour S Pushcart: 4.0 | '23 MGS Clicgear 4.0 Pushcart Tester | Link here Link to comment Share on other sites More sharing options...
jbern Posted March 1 Share Posted March 1 (edited) I'm fairly new to club building/customization. I've done a few things in the past, but haven't really given them much thought. I recently cut down an armlock putter 3" and regripped it with a heavier grip. I liked the length change, but it threw off the swing weight drastically, so I ended up adding a lot of lead tape to the bottom of the putter. Long story longer, I recently picked up a Cobra LTDx from a fellow spy and have been playing around with choking up on the shaft (it's currently 45.5 inches). I hit it the best in the simulator when I was choking up at least 1" (probably closer to 1.25"). So I'm considering shortening the club permanently and also putting on a JumboMax Tour Series XS grip (I love the firm feel and size of those grips). This means that not only would I be shortening the club, but also going from a 47g grip to a 90g grip. I don't really want the overall club weight to go up potentially 70-90g (43g in grip change, plus added weight to driver head). Do any of you who do this more often have any advice? Do I just forget the heavy JumboMax and go for an UltraLite? Also, I don't really want to re-tip the shaft, but is it advised when taking more than 1" off the shaft? Edited March 1 by jbern typos TJ Hall and BallsLeon 2 Quote WITB (link to detailed post here): Driver: LTDx 9* (ProjectX BlueSmoke Stiff) Fairway metals: 3W TSR2 14.25* (ProjectX BlueSmoke Stiff) | 5W Gen4 0341XF (Mitsubishi Tensei Blue 75 S) Hybrid: 4H Gen4 0317XF (Mitsubishi Tensei Blue 75HY S) Irons: 659 CB 5-AW (Project X Rifle 6.0) Wedges: 286 54* & 58* (KBS Tour 120 S) Putter: AL-6 armlock | Unofficial review here Ball: pro drip: red & blue | Tour S Pushcart: 4.0 | '23 MGS Clicgear 4.0 Pushcart Tester | Link here Link to comment Share on other sites More sharing options...
Fatshot Posted March 5 Share Posted March 5 (edited) I just bought a mint Cobra LTDx Max 10.5 degree driver head and paired it up with a UST Mamiya Helium shaft (senior flex). I spined and floed the shaft before attaching it to the head, and played 18 holes with it yesterday. My first couple of drives were pull hooks (my usual miss), but then I started aiming a little right and tried harder to "wait on the club head" before hitting through the ball. This straightened the drives out a lot, but still was hitting it more left than straight. I would say that overall I hit it LOW and slightly LEFT compared to my gamer. When I got home yesterday I got out the torque wrench and changed from the "Standard loft / draw" setting to "+1.5 degree/ straight." We'll see how that goes next time out..... If that doesn't prove to be better than my old Ping G, I'll fit it with an R shaft and give it to my 50 year old son.... Edited March 5 by Fatshot Quote Driver: Ping G, 12*, Senior Flex Woods: Orlimar Trimetal +, 20* and 26* /Taylormade 300 Series 23* Hybrid: Maltby STi, 24* Irons: Maltby PTM, 6-PW Wedges: Indi SuperGap 49* Maltby M-Series 54* and 58* Putter: Maltby PTM-5 mallet Link to comment Share on other sites More sharing options...
03trdblack Posted March 5 Share Posted March 5 Nice single length build that I did. I 3D printed plastic weight screws for the heavier irons (PW and 9). cnosil, Fatshot, Nick_D and 3 others 3 1 2 Quote My bag is a revolving door! Link to comment Share on other sites More sharing options...
TSauer Posted March 5 Share Posted March 5 1 minute ago, 03trdblack said: Nice single length build that I did. I 3D printed plastic weight screws for the heavier irons (PW and 9). Those irons are gorgeous! 03trdblack, Nick_D and Fatshot 2 1 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
03trdblack Posted March 5 Share Posted March 5 1 minute ago, TSauer said: Those irons are gorgeous! Really a great design! TSauer 1 Quote My bag is a revolving door! Link to comment Share on other sites More sharing options...
TSauer Posted March 9 Share Posted March 9 On today’s agenda… William P, BallsLeon, Nick_D and 6 others 4 1 1 3 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted March 9 Author Share Posted March 9 46 minutes ago, TSauer said: On today’s agenda… Love it love it love it! TJ Hall, smartak, William P and 1 other 2 2 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.