StrokerAce Posted September 30, 2019 Share Posted September 30, 2019 This is very cool! @GolfSub70 Rtracymog, JAGolfore, GolfSub70 and 2 others 5 Quote Driver- Titleist TSR3 10* Woods- Cobra LTD 3w 15*, 5W 19* Irons- Titleist 718 AP2 (5i-50*) Wedges- Callaway Jaws Raw (54/58) Putter- Wilson Infinite Grant Park Ball- Maxfli Tour X Buggy- Motocaddy M7 GPS Remote Electric Caddy Bag- Motocaddy Dry-Series Proudly testing for 2024: Link to comment Share on other sites More sharing options...
GolfSub70 Posted September 30, 2019 Share Posted September 30, 2019 7 hours ago, gr8shrtgame said: Do yourself a favor and at least demo an iron or two. You will not regret it. Even if you hate the clubs, it only cost you $20. Thanks for coming out and visiting!!! Jason is great to work with and is really passionate about getting people into the right setup. For anyone that's not in the area...we will always do everything we can to provide a great fitting by phone, email or through social media chats. The demo program is a great option to help narrow it down as well. Thanks for the feedback and support! JAGolfore, GolfSpy_BNG and MattF 3 Quote Link to comment Share on other sites More sharing options...
romeopapazulu Posted November 12, 2019 Share Posted November 12, 2019 For those that have the CB/MB combo set, how do the top lines look? Is the CB any thicker than the MB? If you had to compare the look from address to any of the big(ger) brand clubs, what would you compare these to? Sycamore IL is directly en route to the UP from Salt Lake City, no? JAGolfore and GolfSub70 2 Quote G400 LST 8.5 Ping Tour 65 Stiff Adams XTD Ti 18 deg 3Hy Ben Hogan PTx 22-46 Ben Hogan TK15 50, 54, 58 deg wedges Futura 5.5 Link to comment Share on other sites More sharing options...
JAGolfore Posted November 30, 2019 Share Posted November 30, 2019 For those that have the CB/MB combo set, how do the top lines look? Is the CB any thicker than the MB? If you had to compare the look from address to any of the big(ger) brand clubs, what would you compare these to? Sycamore IL is directly en route to the UP from Salt Lake City, no?I will try and get some photos up of my combo set. I can compare them with the Srixon 765 and 965. Sent from my iPhone using MyGolfSpy romeopapazulu, MattF and GolfSub70 3 Quote Driver: Callaway Rogue 9* FW: Sub 70 Pro 4 wood Hybrid: Sub 70 949 Hybrid 19* Irons: Sub 70 659 CB 4 - 6 Black 639 MB 7 - PW Wedges: Sub 70 JB - 50* 54* & 60* Putter: Odyssey White Hot #2 Ball: Titleist Pro-V1x Handicap index: +3.9 Instagram: joshandersongolf Twitter: @jacustomgolf Link to comment Share on other sites More sharing options...
Jtom2012 Posted December 2, 2019 Share Posted December 2, 2019 Thanks for the replies! Sent from my XT1635-01 using MyGolfSpy mobile app cnosil and GolfSub70 2 Quote Driver- Cobra Speedzone 9° Woods- Sub70 Pro 5-Wood Utility- Titleist 718 T-MB 4 Utility Irons- Sub70 649 MB Tour 5-PW, 699 Pro 2U Wedges- Cleveland Zipcore RTX 52°,56°, 60° Putter- Scotty Cameron Special Select Newport 2 Ball- Titleist ProV1x Link to comment Share on other sites More sharing options...
JAGolfore Posted December 4, 2019 Share Posted December 4, 2019 Here are 2 photos showing the Sub 70 CB and MB irons vs Srixon 965 and 765 irons. The Sub 70 irons are on the left. Srixon on the right. Let me know if you have any more questions. The Sub 70 will be in the bag again in 2020! Sent from my iPhone using MyGolfSpy romeopapazulu, sirchunksalot, ncwoz and 2 others 5 Quote Driver: Callaway Rogue 9* FW: Sub 70 Pro 4 wood Hybrid: Sub 70 949 Hybrid 19* Irons: Sub 70 659 CB 4 - 6 Black 639 MB 7 - PW Wedges: Sub 70 JB - 50* 54* & 60* Putter: Odyssey White Hot #2 Ball: Titleist Pro-V1x Handicap index: +3.9 Instagram: joshandersongolf Twitter: @jacustomgolf Link to comment Share on other sites More sharing options...
vrnyn Posted December 4, 2019 Share Posted December 4, 2019 I really like the look of their hybrids and wedges. Will definitely consider them when I need an upgrade JAGolfore, ncwoz and GolfSub70 3 Quote M5 9.0* 915d 18* & 21* 716 AP2 4&5 ZB 6-P SM7 52-F, 56-S & SM6 60-K Futura X5 Link to comment Share on other sites More sharing options...
jfrigo Posted December 5, 2019 Share Posted December 5, 2019 On 11/11/2019 at 9:59 PM, romeopapazulu said: For those that have the CB/MB combo set, how do the top lines look? Is the CB any thicker than the MB? If you had to compare the look from address to any of the big(ger) brand clubs, what would you compare these to? Sycamore IL is directly en route to the UP from Salt Lake City, no? The CB are very very slightly thicker than the MB...and honestly the MB's are probably some of the thicker blades you will find. I dont mean that as a bad thing, but if people are looking for slimmer blades then these are not it. With that being said ive loved the performance of them all year. Performance wise id put these up against anything on the market. is there better?? Yea... Is there worse?? Yea. But for the price you definitely will be very happy! These are high quality forged irons for an unbeatable price romeopapazulu, MattF, GolfSub70 and 2 others 5 Quote TM M5 9* LA Golf Ozik Black Tie 6x TM M6 15* LA Golf Ozik Black Tie 7x Callaway Epic Forged 4i Aerotech Steelfiber FC115 Mizuno MP 20MMC 4 - PW Aerotech Steelfiber FC115 TM Milled Grind 2 50*, 54* UST Recoil Prototype 125 TM Bigfoot 58* UST Recoil Wedge Prototype 125 Bettinardi Queen Bee #6 Link to comment Share on other sites More sharing options...
JAGolfore Posted December 5, 2019 Share Posted December 5, 2019 1 hour ago, jfrigo said: The CB are very very slightly thicker than the MB...and honestly the MB's are probably some of the thicker blades you will find. I dont mean that as a bad thing, but if people are looking for slimmer blades then these are not it. With that being said ive loved the performance of them all year. Performance wise id put these up against anything on the market. is there better?? Yea... Is there worse?? Yea. But for the price you definitely will be very happy! These are high quality forged irons for an unbeatable price The top line on the SRIXON 965 is 5mm. The top line on the SUB 70 MB is 4.5mm very close, but the Sub 70 is thinner. You can see it in the photos. The Sub 70 also have a slightly smaller profile which is nice. GolfSub70 1 Quote Driver: Callaway Rogue 9* FW: Sub 70 Pro 4 wood Hybrid: Sub 70 949 Hybrid 19* Irons: Sub 70 659 CB 4 - 6 Black 639 MB 7 - PW Wedges: Sub 70 JB - 50* 54* & 60* Putter: Odyssey White Hot #2 Ball: Titleist Pro-V1x Handicap index: +3.9 Instagram: joshandersongolf Twitter: @jacustomgolf Link to comment Share on other sites More sharing options...
jfrigo Posted December 5, 2019 Share Posted December 5, 2019 5 hours ago, JoshAndersonGolf said: The top line on the SRIXON 965 is 5mm. The top line on the SUB 70 MB is 4.5mm very close, but the Sub 70 is thinner. You can see it in the photos. The Sub 70 also have a slightly smaller profile which is nice. im surprised by that. I had the 965s last year and liked the look, definitely on the longer side of blades. The 7-P MB's I have look chunky. Sometimes I think I may have gotten the MB Plus instead. Ill post a pic when I get home but my PW is very thick up top and noticeable offset GolfSub70 1 Quote TM M5 9* LA Golf Ozik Black Tie 6x TM M6 15* LA Golf Ozik Black Tie 7x Callaway Epic Forged 4i Aerotech Steelfiber FC115 Mizuno MP 20MMC 4 - PW Aerotech Steelfiber FC115 TM Milled Grind 2 50*, 54* UST Recoil Prototype 125 TM Bigfoot 58* UST Recoil Wedge Prototype 125 Bettinardi Queen Bee #6 Link to comment Share on other sites More sharing options...
JAGolfore Posted December 5, 2019 Share Posted December 5, 2019 1 hour ago, jfrigo said: im surprised by that. I had the 965s last year and liked the look, definitely on the longer side of blades. The 7-P MB's I have look chunky. Sometimes I think I may have gotten the MB Plus instead. Ill post a pic when I get home but my PW is very thick up top and noticeable offset I think there is slightly more offset on the SUB 70 MB's vs the Srixon giving that look. I measured them where the face lines meet the top line on the toe. Quote Driver: Callaway Rogue 9* FW: Sub 70 Pro 4 wood Hybrid: Sub 70 949 Hybrid 19* Irons: Sub 70 659 CB 4 - 6 Black 639 MB 7 - PW Wedges: Sub 70 JB - 50* 54* & 60* Putter: Odyssey White Hot #2 Ball: Titleist Pro-V1x Handicap index: +3.9 Instagram: joshandersongolf Twitter: @jacustomgolf Link to comment Share on other sites More sharing options...
JAGolfore Posted December 5, 2019 Share Posted December 5, 2019 Srixon 965 9 iron on the leftSub 70 MB 9 iron on the right. Sent from my iPhone using MyGolfSpy HardcoreLooper, MattF, GolfSub70 and 1 other 4 Quote Driver: Callaway Rogue 9* FW: Sub 70 Pro 4 wood Hybrid: Sub 70 949 Hybrid 19* Irons: Sub 70 659 CB 4 - 6 Black 639 MB 7 - PW Wedges: Sub 70 JB - 50* 54* & 60* Putter: Odyssey White Hot #2 Ball: Titleist Pro-V1x Handicap index: +3.9 Instagram: joshandersongolf Twitter: @jacustomgolf Link to comment Share on other sites More sharing options...
revkev Posted December 14, 2019 Share Posted December 14, 2019 I had my sub 70 hat on at the range today and one of our Mini Tour guys was all over me. He’s very interested in the CBs - that should tell all of us something.I have a friend with those and told the guy I would invite him (my friend) to play a week from Sunday afternoon. He said he’d meet us on the range to try them - my friend has Project x 5.5’s in his so the guy will at least get a feel for them. Sent from my iPhone using MyGolfSpy cnosil, JAGolfore, sirchunksalot and 4 others 7 Quote Driver: Taylor Made Stealth 2 10.5 Diamana S plus 60 R flex - 44.25 Fairways: Ping G410 5, 7, 9 wood Alta CB red 65 R flex Hybrid: Ping G410 26 degree Alta CB Red 70 R flex Irons: Ping G430 7-PW, 45, 50 Alta CB black 65 soft R flex Wedges: Ping 195 S54, E58 Wedges and irons are - 1/2” and one degree flat Putter: Sacks Parente Duke 32.5” Ball: Titleist Pro VI or Callaway Chrome Soft X ls While not at the same time I was fit for every club in my bag as well as the Pro VI ball. I use the chrome soft x ls on my league course. It has much softer softer greens than the club that I belong to. I’m on a mission to shoot my age - lifetime lowest round is 66 and I’m currently 67. Link to comment Share on other sites More sharing options...
Bossfan Posted December 15, 2019 Share Posted December 15, 2019 I was playing at the simulator at the course I’ve taken lessons at. The pro who gave me lessons was there so I had him take a look at my Sub 70 irons. He had heard of them and been on their website but had never seen any of their products up close. He was very impressed by the quality of them. GolfSub70, JAGolfore, MattF and 1 other 4 Quote D- Tour Edge EXS 220 4W- Sub 70 949X Hybrid- Sub 70 949X Utility- Sub 70 699 U 21 degree Irons- Sub 70 749 5-PW Wedges- Sub 70 286 50+54, Tour Edge 1 out 58 degree Putter- Cleveland Huntington Beach soft # 11 Ball- Titleist Tour Soft Link to comment Share on other sites More sharing options...
Jtom2012 Posted December 24, 2019 Share Posted December 24, 2019 Ordered a set of the 699's. Will probably order a set of wedges tooSent from my XT1635-01 using MyGolfSpy mobile app JAGolfore, HardcoreLooper, MattF and 1 other 4 Quote Driver- Cobra Speedzone 9° Woods- Sub70 Pro 5-Wood Utility- Titleist 718 T-MB 4 Utility Irons- Sub70 649 MB Tour 5-PW, 699 Pro 2U Wedges- Cleveland Zipcore RTX 52°,56°, 60° Putter- Scotty Cameron Special Select Newport 2 Ball- Titleist ProV1x Link to comment Share on other sites More sharing options...
J.B. TexasEx Posted December 26, 2019 Share Posted December 26, 2019 (edited) I just talked with Sub 70's CEO, Jason Hiland, for ten minutes about my game and what I want and need in my next set of irons. Based on our conversation, I'm gonna demo both their new 699 Pro irons and 639 CBs and make a decision from there. Where else are you gonna get that kind of customer service? I was considering another set of Ben Hogan irons, but having a direct line to the CEO is a difference-maker for me. Who else stands behind their products to that degree? Edited December 26, 2019 by J.B. TexasEx GolfSub70, sirchunksalot, JAGolfore and 5 others 8 Quote My C-130 cart bag includes; DRIVER: z565 10.5*, Miyazaki Kaula Mizu 6 S-Flex FAIRWAYS: X-Hot 15* & 18*, Project X PXv, R-Flex and 21*, UST DHI dRVR, R-Flex IRONS: New Level 623-CB, 5-PW, IO, 5.5 R+Flex WEDGES: CG10; 50*, 54*, 58*, Dynamic Gold W-Flex PUTTER: Ray Cook Blue Goose GRIPS: Lamkin Crossline (irons), Lamkin UTx (wedges), Golf Pride Z-Cord & MCC (woods) BALL: Kirkland Signature 3-Piece Link to comment Share on other sites More sharing options...
J.B. TexasEx Posted December 29, 2019 Share Posted December 29, 2019 (edited) On 12/24/2019 at 9:58 AM, Jtom2012 said: Ordered a set of the 699's. Will probably order a set of wedges too Sent from my XT1635-01 using MyGolfSpy mobile app Please let us know how how you're hitting your new 699's versus your current gamers. Sent from my SM-N920V using MyGolfSpy mobile app Edited December 30, 2019 by J.B. TexasEx GolfSub70 and JAGolfore 2 Quote My C-130 cart bag includes; DRIVER: z565 10.5*, Miyazaki Kaula Mizu 6 S-Flex FAIRWAYS: X-Hot 15* & 18*, Project X PXv, R-Flex and 21*, UST DHI dRVR, R-Flex IRONS: New Level 623-CB, 5-PW, IO, 5.5 R+Flex WEDGES: CG10; 50*, 54*, 58*, Dynamic Gold W-Flex PUTTER: Ray Cook Blue Goose GRIPS: Lamkin Crossline (irons), Lamkin UTx (wedges), Golf Pride Z-Cord & MCC (woods) BALL: Kirkland Signature 3-Piece Link to comment Share on other sites More sharing options...
Shakey Posted January 7, 2020 Share Posted January 7, 2020 Have a feeling either the 699 Pros or new W/S D7 Forged will be replacing my CF16s soon. Just waiting for sub70 to release the demos to give them a try. HardcoreLooper, JAGolfore, J.B. TexasEx and 1 other 4 Quote Link to comment Share on other sites More sharing options...
JimNantzsToast Posted January 14, 2020 Share Posted January 14, 2020 I'm taking a good hard look at their hybrid, anyone have some good experience there? Also, after being a Lynx Black Cat tester, and roaming around on the Sub70 site for a while, the 699 irons and the Black Cat look very similar - I wonder if they are from the same "open" design (I think that's what it's called) Either way, I'd love some feedback on the hybrid! My current hybrid is 10 ish years old by now JAGolfore 1 Quote Tommy Armour 845 10.5* Rogue 3W King F7 5W Sub70 939 3H Lynx Black Cat // King F8 5i-GW Tour-S 54*/12* Adams Tom Watson 58*/8* Tommy Armour 303 Milled Habanero Link to comment Share on other sites More sharing options...
cnosil Posted January 14, 2020 Share Posted January 14, 2020 8 minutes ago, JimNantzsToast said: I'm taking a good hard look at their hybrid, anyone have some good experience there? Either way, I'd love some feedback on the hybrid! My current hybrid is 10 ish years old by now Hybrid is a solid club; I like it, just didn't perform as well as the Titleist for me but that could be due to the shaft. I have one for sale in the classified section if you are interested. GolfSub70, JAGolfore and JimNantzsToast 3 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: Paradym AI Smoke Max HL 16.5* w/MCA TENSEI AV Series Blue Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/Accra iWedge 90 Graphite Putter: Render w/VA Composites Baddazz Backup Putters: Sacks Parente MC 3 Stripe, Milled Collection RSX 2 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
MattF Posted January 14, 2020 Share Posted January 14, 2020 Finally hit the 3 wood the other day. Aside from my swing being off from not touching a club for 3 or so months, it's solid. Off the deck, when I actually put a decent swing on it, I was getting 205+ and off the tee it's somewhere past 220. JAGolfore, MaxEntropy, revkev and 3 others 6 Quote In the bag: Driver: Darkspeed X 9° UST Mamiya LIN-Q M40X Blue 7F4 Fairway: Apex UW 19° & 21° Project X HZRDUS Smoke RDX Black 5.5 Irons: JPX 923 HMP 5-PW UST Mamiya Recoil 95 F4 Wedges: T-22 Denim Copper 48°, 52° & 56° UST Mamiya Recoil 95 F4 Putter Sycamore 005 Wide Blade Bag: Fairway 14 stand bag Balls: Chrome Tour X Cart: CaddyLite ONE Ver. 8 Link to comment Share on other sites More sharing options...
JimNantzsToast Posted January 15, 2020 Share Posted January 15, 2020 22 hours ago, cnosil said: Hybrid is a solid club; I like it, just didn't perform as well as the Titleist for me but that could be due to the shaft. I have one for sale in the classified section if you are interested. Awesome, I just looked at it, and you should have a PM in your inbox now... JAGolfore, GolfSub70 and cnosil 3 Quote Tommy Armour 845 10.5* Rogue 3W King F7 5W Sub70 939 3H Lynx Black Cat // King F8 5i-GW Tour-S 54*/12* Adams Tom Watson 58*/8* Tommy Armour 303 Milled Habanero Link to comment Share on other sites More sharing options...
Jtom2012 Posted January 24, 2020 Share Posted January 24, 2020 I highly recommend anyone who is looking or considering new equipment to at least give Sub70 a look!I am now playing the Sub70 699 irons 5-Gap, 699 utility and 54 and 58 degree wedges. Sent from my XT1635-01 using MyGolfSpy mobile app HardcoreLooper, GolfSub70 and JAGolfore 3 Quote Driver- Cobra Speedzone 9° Woods- Sub70 Pro 5-Wood Utility- Titleist 718 T-MB 4 Utility Irons- Sub70 649 MB Tour 5-PW, 699 Pro 2U Wedges- Cleveland Zipcore RTX 52°,56°, 60° Putter- Scotty Cameron Special Select Newport 2 Ball- Titleist ProV1x Link to comment Share on other sites More sharing options...
halliedog Posted February 15, 2020 Share Posted February 15, 2020 Great thread so far and very informative! Couple of questions for @GolfSub70: - What is the black finish made of? Is it the crappy PVD or some other type of "surface coating" that wears rather quickly, or something more durable like black nitride or DBM? - Is it, or will it at some point be, possible to get the black finish on other models besides the 639cbs? Or even possibly raw? I could see the added expense of doing just a few 1-offs of a certain head in black for "special orders", but offering in raw should actually help with cost as its one less step of the finishing process. (Plus in my case, if I wanted to add the black nitride myself if you don't offer it, it would save me the expense of stripping the chrome first ) - Any updates on the modified MB version pictured a few pages back (639-G i think it was called)? I know it was mentioned it wouldn't be available until sometime in 2020, if at all, but here we are already! To be honest I'm not really in the market for new irons this year, but at this cost, a set of those in a durable black finish look very intriguing! - I saw mention on twitter of a 699 Pro, but can't find any info on your website - can you elaborate? - Since you don't offer heads only for purchase, can you at least ship the clubs un-assembled if I were to purchase the "full club"? Reason I ask is I always make some customizations to my irons before use (doweling, pro-soft inserts, custom ferrules/grips, etc.) and this would simplify the process. JAGolfore and GolfSub70 2 Quote Link to comment Share on other sites More sharing options...
Tazz2293 Posted February 18, 2020 Share Posted February 18, 2020 On 2/15/2020 at 1:46 PM, halliedog said: Great thread so far and very informative! - I saw mention on twitter of a 699 Pro, but can't find any info on your website - can you elaborate? Here is the link to the 699 Pro. Will be released late February https://www.golfsub70.com/sub-70-699-pro-irons.html JAGolfore and GolfSub70 2 Quote Link to comment Share on other sites More sharing options...
halliedog Posted February 19, 2020 Share Posted February 19, 2020 22 hours ago, Tazz2293 said: Here is the link to the 699 Pro. Will be released late February https://www.golfsub70.com/sub-70-699-pro-irons.html They must've just put that up, I swear it wasn't there over the weekend. Anyway, Sweet Baby Jesus! Those look amazing, very clean, minimal "branding", reduced head size and offset, and a durable nitrocarburized finish. I may have to pick up a demo when available. Also anxiously awaiting if they announce plans to release that 639-G they teased earlier - that in black could be the one! I swore I was set on equipment for the year, but at this price for a nice new set of toys it's hard to pass up. I'm still thrilled with my TM P770s and have no intention of ditching them, but a demo of of the 639-G or 699 Pro could make that thinking go right out the window. GolfSub70 1 Quote Link to comment Share on other sites More sharing options...
GolfSub70 Posted February 20, 2020 Share Posted February 20, 2020 On 2/15/2020 at 12:46 PM, halliedog said: Great thread so far and very informative! Couple of questions for @GolfSub70: - What is the black finish made of? Is it the crappy PVD or some other type of "surface coating" that wears rather quickly, or something more durable like black nitride or DBM? - Is it, or will it at some point be, possible to get the black finish on other models besides the 639cbs? Or even possibly raw? I could see the added expense of doing just a few 1-offs of a certain head in black for "special orders", but offering in raw should actually help with cost as its one less step of the finishing process. (Plus in my case, if I wanted to add the black nitride myself if you don't offer it, it would save me the expense of stripping the chrome first ) - Any updates on the modified MB version pictured a few pages back (639-G i think it was called)? I know it was mentioned it wouldn't be available until sometime in 2020, if at all, but here we are already! To be honest I'm not really in the market for new irons this year, but at this cost, a set of those in a durable black finish look very intriguing! - I saw mention on twitter of a 699 Pro, but can't find any info on your website - can you elaborate? - Since you don't offer heads only for purchase, can you at least ship the clubs un-assembled if I were to purchase the "full club"? Reason I ask is I always make some customizations to my irons before use (doweling, pro-soft inserts, custom ferrules/grips, etc.) and this would simplify the process. Thanks for the message and sorry for the delay getting back to you. Please see below for some answers to your questions... What is the black finish made of? Is it the crappy PVD or some other type of "surface coating" that wears rather quickly, or something more durable like black nitride or DBM? The 639 black irons do have a tour PVD finish. In our testing we haven't observed any major wear or other issues with the finish. The 699 Pro will be using a DBM finish though. - Is it, or will it at some point be, possible to get the black finish on other models besides the 639cbs? Or even possibly raw? I could see the added expense of doing just a few 1-offs of a certain head in black for "special orders", but offering in raw should actually help with cost as its one less step of the finishing process. (Plus in my case, if I wanted to add the black nitride myself if you don't offer it, it would save me the expense of stripping the chrome first ) We do have black 639 MBs now...so full black MB or black MB/CB combo sets can be purchased. We've discussed offering irons in the raw finish, and the 639 forged line would obviously be the choice for that, but we haven't made a final decision on that at this point. I think we'll do it eventually. Just a matter of getting other projects taken care of first. - Any updates on the modified MB version pictured a few pages back (639-G i think it was called)? I know it was mentioned it wouldn't be available until sometime in 2020, if at all, but here we are already! To be honest I'm not really in the market for new irons this year, but at this cost, a set of those in a durable black finish look very intriguing! We're definitely still working on these in some capacity...but not entirely sure how much they'll resemble the original prototype when they're done. We're working with Tommy Armour III to create another forged iron model and some of the 639-G features might be incorporated. They'll be available in a high end black finish and will be a great players forged iron with a few differences from our current CB or MB - I saw mention on twitter of a 699 Pro, but can't find any info on your website - can you elaborate? I believe that was posted above already...if not, there should be some info on our website now - Since you don't offer heads only for purchase, can you at least ship the clubs un-assembled if I were to purchase the "full club"? Reason I ask is I always make some customizations to my irons before use (doweling, pro-soft inserts, custom ferrules/grips, etc.) and this would simplify the process. I don't think that would be an issue...I would just reach out to our CEO Jason Hiland at 815-621-3556 or Jason@GolfSub70.com to make that happen. He'll definitely do whatever he can to get you what you need. Thanks again for the questions! sirchunksalot, JAGolfore, edingc and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Brask85 Posted February 21, 2020 Share Posted February 21, 2020 I am really interested in the 639 mb and I have seen and tried one of their wedges from a friend and I loved it. AIso see nothing but positive reviews of them everywhere I read, but my only question is the gapping between the Pw in the set and the wedges don’t line up. The PW is 45* and the closest wedge that would make sense for my gapping would be a 50, 54, 58 preferably. Downside is they don’t have a 50 or 58. Any chance those will be coming out anytime soon? JAGolfore and GolfSub70 2 Quote Link to comment Share on other sites More sharing options...
cnosil Posted February 21, 2020 Share Posted February 21, 2020 28 minutes ago, Brask85 said: I am really interested in the 639 mb and I have seen and tried one of their wedges from a friend and I loved it. AIso see nothing but positive reviews of them everywhere I read, but my only question is the gapping between the Pw in the set and the wedges don’t line up. The PW is 45* and the closest wedge that would make sense for my gapping would be a 50, 54, 58 preferably. Downside is they don’t have a 50 or 58. Any chance those will be coming out anytime soon? You could get them bent to fit the distance gaps. MattF, GolfSub70 and JAGolfore 3 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: Paradym AI Smoke Max HL 16.5* w/MCA TENSEI AV Series Blue Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/Accra iWedge 90 Graphite Putter: Render w/VA Composites Baddazz Backup Putters: Sacks Parente MC 3 Stripe, Milled Collection RSX 2 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
NM01 Posted February 21, 2020 Share Posted February 21, 2020 1 hour ago, Brask85 said: I am really interested in the 639 mb and I have seen and tried one of their wedges from a friend and I loved it. AIso see nothing but positive reviews of them everywhere I read, but my only question is the gapping between the Pw in the set and the wedges don’t line up. The PW is 45* and the closest wedge that would make sense for my gapping would be a 50, 54, 58 preferably. Downside is they don’t have a 50 or 58. Any chance those will be coming out anytime soon? 1 degree difference in loft with a wedge is abou 3-4 yards...highly doubt any amateur would be affected by that type of gapping, wedges and irons can be bent to better gap if needed. Someone that can hit different shots with clubs by choking down, shorter swings and/or ball placement can get around “loft” issues. Lastly tons of wedge options out on the market JAGolfore, GolfSub70 and silver & black 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.