Sluggo42 Posted March 1, 2019 Author Share Posted March 1, 2019 So here’s a few picks of the raw wedges after 4 rounds now. and the udder side... good spin from these... two rounds have have been in the rain, and I’m an early bird, so it’s always wet -so that might be an accelerating factor... TR1PTIK, JAGolfore, M. Parsons and 2 others 5 Quote TSr2 on tensi blue stiff Speedzone 3-wood on Tensi blue S Epic Max 5 and 7 woods on HZRDUS Reg flex Paradym 9 wood on HZRDUS reg flex P770 / P790 combo set on Ventus R-6 shafts 6-AW T22 Denim Copper 54°, 58° on Kinetic X Trajectory ER3 or, E.A.S. #4 (“Fang” or “Adele”) ProV1x, or, Maxfli Tour X .Org 14 cart bag Adidas Tour 360 , or Sketcher shoes Link to comment Share on other sites More sharing options...
GolfSub70 Posted March 1, 2019 Share Posted March 1, 2019 9 hours ago, Sluggo42 said: So here’s a few picks of the raw wedges after 4 rounds now. Thanks for sharing! I tell everyone that asks about the raw finish that it's not for everyone...but it's a great option and I've really warmed up to the look. It's fun to see them develop that patina. We had a guy that sprayed them on purpose to accelerate the rusting process. Hopefully they are performing well for you too! TR1PTIK and JAGolfore 2 Quote Link to comment Share on other sites More sharing options...
Kwoodfield Posted March 1, 2019 Share Posted March 1, 2019 It’s weird. Rust on some clubs drives me mad, yet on wedges I lovvvve it. These look great!Sent from my iPhone using MyGolfSpy JAGolfore and GolfSub70 2 Quote Link to comment Share on other sites More sharing options...
Sluggo42 Posted March 2, 2019 Author Share Posted March 2, 2019 11 hours ago, GolfSub70 said: Thanks for sharing! I tell everyone that asks about the raw finish that it's not for everyone...but it's a great option and I've really warmed up to the look. It's fun to see them develop that patina. We had a guy that sprayed them on purpose to accelerate the rusting process. Hopefully they are performing well for you too! So far so good- only 4 rounds in, but, spin is awesome! PMookie, josmi15, GolfSub70 and 1 other 4 Quote TSr2 on tensi blue stiff Speedzone 3-wood on Tensi blue S Epic Max 5 and 7 woods on HZRDUS Reg flex Paradym 9 wood on HZRDUS reg flex P770 / P790 combo set on Ventus R-6 shafts 6-AW T22 Denim Copper 54°, 58° on Kinetic X Trajectory ER3 or, E.A.S. #4 (“Fang” or “Adele”) ProV1x, or, Maxfli Tour X .Org 14 cart bag Adidas Tour 360 , or Sketcher shoes Link to comment Share on other sites More sharing options...
Popular Post PMookie Posted March 3, 2019 Popular Post Share Posted March 3, 2019 I received my Sub 70 seven iron to try. Looks great! We just had another two days of rain, so who knows when I’ll be able to try it. Looking forward to seeing what it can do, and how it feels!Sent from my iPhone using Tapatalk Pro Golfspy_CG2, GB13, cnosil and 7 others 10 Quote Driver: Ping G430 Max 9*, Ping Tour 70X Fairway: Ping G425 15*, Ping Tour 70X Hybrid: Ping G425 22*, Ping Tour 80X Irons: Ping i230 4-GW, TT DG X100 Wedges: SMS 50D/54V/58DModus 130 stiff, +1” Putter: EAS 1.0 Ball: Titleist 2023 AVX Link to comment Share on other sites More sharing options...
Kwoodfield Posted March 4, 2019 Share Posted March 4, 2019 Can’t wait to get these on order Sent from my iPhone using MyGolfSpy GolfSub70, Waazzupppp, JAGolfore and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Sluggo42 Posted March 4, 2019 Author Share Posted March 4, 2019 Every time I see those 639’s, I want some PMookie, JAGolfore and GolfSub70 3 Quote TSr2 on tensi blue stiff Speedzone 3-wood on Tensi blue S Epic Max 5 and 7 woods on HZRDUS Reg flex Paradym 9 wood on HZRDUS reg flex P770 / P790 combo set on Ventus R-6 shafts 6-AW T22 Denim Copper 54°, 58° on Kinetic X Trajectory ER3 or, E.A.S. #4 (“Fang” or “Adele”) ProV1x, or, Maxfli Tour X .Org 14 cart bag Adidas Tour 360 , or Sketcher shoes Link to comment Share on other sites More sharing options...
robertson153 Posted March 4, 2019 Share Posted March 4, 2019 Every time I almost forget about Sub70 someone bumps this thread You guys are killing me Sent from my iPhone using MyGolfSpy PMookie, Waazzupppp, GolfSub70 and 2 others 5 Quote CobraConnectChallenge3 Link to comment Share on other sites More sharing options...
edingc Posted March 4, 2019 Share Posted March 4, 2019 That club is gorgeous. Love to no medallion/badge look. So clean. PMookie, GolfSub70 and JAGolfore 3 Quote Unofficial WHS Handicap: 3.6 / Anti-Cap: 9.9 (Last Updated Sept. 1, 2024) Driver: Callaway Paradym TD (10.5°), 45.75", Fujikura Motore X F1 6X | Fitting Post 3 Wood: Cobra RadSpeed Big Tour (14.5°), 43", Fujikura Motore X F1 7X 20° Hybrid: PXG 0211 (2020 Model), 40.25", Mitsubishi Tensei AV RAW White 90X 4 Utility: Cobra KING Utility (2020 Model), 38.5", Aerotech SteelFiber i110cw Stiff 5-PW: Ben Hogan PTx Pro, 37" 7 Iron, Aerotech SteelFiber i125cw Stiff | Club Champion Fitting 50°, 54°, 58°: Edel SMS, V Grind, Nippon Modus 125 Wedge| Official Review Thread Putter: L.A.B. Golf DF 2.1, 36", 68°, Black with Custom Sightlines, BGT Stability Tour, L.A.B. Press II 3° | Unofficial Review Grips: Star Sidewinder, Undersized with Custom Tape Build-Up Ball: Snell MTB-X Optic Yellow Tracked By: Shot Scope H4 Bag: Personalized 2020 Sun Mountain Sync Riding On: Bag Boy Nitron | Official Review Thread WITB? | 2022 Reviewer Edel SMS Wedges | 2021 Reviewer Maxfli Tour and Tour X Balls | 2020 Participant #CobraConnect Challenge | 2019 Reviewer Callaway Epic Flash Driver Link to comment Share on other sites More sharing options...
Popular Post cnosil Posted March 7, 2019 Popular Post Share Posted March 7, 2019 Got to try the 739 irons today as part of the Game Improvement Iron Most Wanted category. Was in my group of 7 irons today and I still have the 5 and PW to go. Overall performance was equivalent to anything I have tested in this group so far. I didn't get any specific numbers but ball speed and launch were good. My only problem was that I had a tendency to hit a high fade with the test clubs. This wasn't the case with other clubs I was testing. Anyone looking for a game improvement iron should take a look at the 739 series. StrokerAce, MaxEntropy, GolfSpy_BNG and 8 others 11 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: Paradym AI Smoke Max HL 16.5* w/MCA TENSEI AV Series Blue Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/Accra iWedge 90 Graphite Putter: Render w/VA Composites Baddazz Backup Putters: Sacks Parente MC 3 Stripe, Milled Collection RSX 2 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
GolfSub70 Posted March 7, 2019 Share Posted March 7, 2019 13 hours ago, cnosil said: Got to try the 739 irons today as part of the Game Improvement Iron Most Wanted category. Was in my group of 7 irons today and I still have the 5 and PW to go. Overall performance was equivalent to anything I have tested in this group so far. I didn't get any specific numbers but ball speed and launch were good. My only problem was that I had a tendency to hit a high fade with the test clubs. This wasn't the case with other clubs I was testing. Anyone looking for a game improvement iron should take a look at the 739 series. Thanks for the info! Glad to hear the iron testing has started already. I know the guys at MGS are hoping to get more of their testing and results out earlier this year. I bet a different shaft would lower the flight and straighten out that fade with the 739s Waazzupppp, cnosil, MattF and 1 other 4 Quote Link to comment Share on other sites More sharing options...
newballcoach Posted March 7, 2019 Share Posted March 7, 2019 For you guys that have demoed/played/seen these irons, what is the offset like? According to the spec numbers on their website (which don't provide units, so I have to assume are measured in milimetres), the offsets are the same or higher than my current set of Callaway Steelhead's, (which are a GI iron with strong offset). The 599 have the least offset but the 639 have even more offset than the Callaways. Has this affected the flight of the ball for anyone? I was kind of under the impression these are supposed to be more of a playerish type of iron, but with that amount of offset I am going to have a hard time keeping them out of the left rough (yes obviously I need to test them). Just wondering if a) these numbers/units are correct and b) if anybody else has noticed/has an issue with the extreme offset in these clubs. Thanks guys. JAGolfore and GolfSub70 2 Quote WITB Driver- PING G400 LST w/ Project X Evenflow Black Fwy- TM Aeroburner 16.5HL Irons- Callaway Steelhead XR (3-PW) Wedges- Callaway MD3 (50,54,58) Putter- Cleveland TFI Satin Cero Ball- Snell MTB-X Link to comment Share on other sites More sharing options...
Waazzupppp Posted March 7, 2019 Share Posted March 7, 2019 I'm just dying to see THESE in real life... They just LOOK like a buttery-soft, penetrating-flight, monster that I can't wait to hit. Pretty sure Sub70 said these would be hitting the market late spring, early summer... So perfect... Clean, yet techie... No excess badging... Just nailed it in the looks department. Now, will they be available in black? Sent from my SM-N960U1 using Tapatalk JAGolfore and GolfSub70 2 Quote In The Bag: Cortex Driver - 9° - Fujikura Atmos Tour Spec Black 7 X-Flex Shaft - Golf Pride Tour Velvet 360 Grip Staff Model Blades - 3-PW - KBS C-Taper 130 X Flex Shafts - Golf Pride Tour Velvet 360 Grip PMP RAW Wedges - 50°, 54° & 58° - KBS C-Taper 130 X Flex Shafts - Golf Pride Tour Velvet 360 Grip Tri-Hot #3 (2002) Putter - Super Stroke Flatso 2.0 Grip AVX Balls + Exo Bag + shoes Link to comment Share on other sites More sharing options...
GolfSub70 Posted March 7, 2019 Share Posted March 7, 2019 1 hour ago, newballcoach said: For you guys that have demoed/played/seen these irons, what is the offset like? According to the spec numbers on their website (which don't provide units, so I have to assume are measured in milimetres), the offsets are the same or higher than my current set of Callaway Steelhead's, (which are a GI iron with strong offset). The 599 have the least offset but the 639 have even more offset than the Callaways. Has this affected the flight of the ball for anyone? I was kind of under the impression these are supposed to be more of a playerish type of iron, but with that amount of offset I am going to have a hard time keeping them out of the left rough (yes obviously I need to test them). Just wondering if a) these numbers/units are correct and b) if anybody else has noticed/has an issue with the extreme offset in these clubs. Thanks guys. Hey thanks for the post. That is correct that they are listed in millimeters on our website...the 639 and 739 pages have it listed as "Offset (mm)" but for some reason it's not in the 699 table. We'll get that "(mm)" added on the 699 page. It looks like Callaway uses inches but it should be a pretty easy conversion. Regarding the offsets themselves, it looks like some sort of typo/clerical mistake may have been made when they were added to the pages. I'm working on getting the correct figures and will make sure it gets fixed on the site. Not exactly sure how that happened as I know it was correct previously... JAGolfore 1 Quote Link to comment Share on other sites More sharing options...
GolfSub70 Posted March 7, 2019 Share Posted March 7, 2019 57 minutes ago, Waazzupppp said: I'm just dying to see THESE in real life... They just LOOK like a buttery-soft, penetrating-flight, monster that I can't wait to hit. Pretty sure Sub70 said these would be hitting the market late spring, early summer... So perfect... Clean, yet techie... No excess badging... Just nailed it in the looks department. Now, will they be available in black? Sent from my SM-N960U1 using Tapatalk That is correct that they should be available by early Summer at the latest. No black finish for the irons yet, but it's definitely something we hope to offer in the future. JAGolfore and Waazzupppp 2 Quote Link to comment Share on other sites More sharing options...
Waazzupppp Posted March 7, 2019 Share Posted March 7, 2019 That is correct that they should be available by early Summer at the latest. No black finish for the irons yet, but it's definitely something we hope to offer in the future.Can't wait! Make sure to keep us posted!!! These Instagram teases are brutal!Sent from my SM-N960U1 using Tapatalk GolfSub70 and JAGolfore 2 Quote In The Bag: Cortex Driver - 9° - Fujikura Atmos Tour Spec Black 7 X-Flex Shaft - Golf Pride Tour Velvet 360 Grip Staff Model Blades - 3-PW - KBS C-Taper 130 X Flex Shafts - Golf Pride Tour Velvet 360 Grip PMP RAW Wedges - 50°, 54° & 58° - KBS C-Taper 130 X Flex Shafts - Golf Pride Tour Velvet 360 Grip Tri-Hot #3 (2002) Putter - Super Stroke Flatso 2.0 Grip AVX Balls + Exo Bag + shoes Link to comment Share on other sites More sharing options...
newballcoach Posted March 7, 2019 Share Posted March 7, 2019 27 minutes ago, GolfSub70 said: Hey thanks for the post. That is correct that they are listed in millimeters on our website...the 639 and 739 pages have it listed as "Offset (mm)" but for some reason it's not in the 699 table. We'll get that "(mm)" added on the 699 page. It looks like Callaway uses inches but it should be a pretty easy conversion. Regarding the offsets themselves, it looks like some sort of typo/clerical mistake may have been made when they were added to the pages. I'm working on getting the correct figures and will make sure it gets fixed on the site. Not exactly sure how that happened as I know it was correct previously... I kind of assumed this was a mistake, from the photos I have seen the offset does not seem that extreme. However, I do believe that you noted earlier in this thread that it is difficult to take a good photo of the offset in an iron. Thanks for looking into this. I am hoping to be able to demo the 699's this summer. JAGolfore and GolfSub70 2 Quote WITB Driver- PING G400 LST w/ Project X Evenflow Black Fwy- TM Aeroburner 16.5HL Irons- Callaway Steelhead XR (3-PW) Wedges- Callaway MD3 (50,54,58) Putter- Cleveland TFI Satin Cero Ball- Snell MTB-X Link to comment Share on other sites More sharing options...
GolfSub70 Posted March 7, 2019 Share Posted March 7, 2019 14 minutes ago, newballcoach said: I kind of assumed this was a mistake, from the photos I have seen the offset does not seem that extreme. However, I do believe that you noted earlier in this thread that it is difficult to take a good photo of the offset in an iron. Thanks for looking into this. I am hoping to be able to demo the 699's this summer. Yeah it's really bizarre...especially since I cross checked those tables to make sure they were correct about 6 weeks ago. We'll get them squared away. Thanks again for pointing that out. I can get "above view" pictures of the 639 CBs at address if you are interested but unfortunately I don't have the 699s or 739s with me at the moment. newballcoach and JAGolfore 2 Quote Link to comment Share on other sites More sharing options...
cnosil Posted March 7, 2019 Share Posted March 7, 2019 Thanks for the info! Glad to hear the iron testing has started already. I know the guys at MGS are hoping to get more of their testing and results out earlier this year. I bet a different shaft would lower the flight and straighten out that fade with the 739s I agree, pretty sure it is a shaft issue or swing weighting. Fitting is important! During testing I don’t pay attention to the shafts or setups so I can’t even tell you what shaft they have. My goal is to try and provide a consistent swing across all the clubs without any bias. It probably wasn’t that bad of a ball flight, just looks like it on a launch monitor. It was just noticeably different than the other clubs I was testing but the flight was consistent from shot to shot. Ultimately it is my belief that it is a quality club, a good value, and holds its own against the name brand clubs. MattF, GolfSub70, JAGolfore and 1 other 4 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: Paradym AI Smoke Max HL 16.5* w/MCA TENSEI AV Series Blue Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/Accra iWedge 90 Graphite Putter: Render w/VA Composites Baddazz Backup Putters: Sacks Parente MC 3 Stripe, Milled Collection RSX 2 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
newballcoach Posted March 7, 2019 Share Posted March 7, 2019 1 hour ago, cnosil said: I agree, pretty sure it is a shaft issue or swing weighting. Fitting is important! During testing I don’t pay attention to the shafts or setups so I can’t even tell you what shaft they have. My goal is to try and provide a consistent swing across all the clubs without any bias. It probably wasn’t that bad of a ball flight, just looks like it on a launch monitor. It was just noticeably different than the other clubs I was testing but the flight was consistent from shot to shot. Ultimately it is my belief that it is a quality club, a good value, and holds its own against the name brand clubs. I would assume the 639 and 699 irons are also in the testing? Players irons and players distance maybe? MGS listed the clubs they need to buy from the manufacturers that did not participate, but they don't list the clubs they got from the companies that do. It would be nice to see which set of irons/putters,etc. were sent in, since most OEM's don't send in the entire line. GolfSub70 1 Quote WITB Driver- PING G400 LST w/ Project X Evenflow Black Fwy- TM Aeroburner 16.5HL Irons- Callaway Steelhead XR (3-PW) Wedges- Callaway MD3 (50,54,58) Putter- Cleveland TFI Satin Cero Ball- Snell MTB-X Link to comment Share on other sites More sharing options...
cnosil Posted March 7, 2019 Share Posted March 7, 2019 I would assume the 639 and 699 irons are also in the testing? Players irons and players distance maybe? MGS listed the clubs they need to buy from the manufacturers that did not participate, but they don't list the clubs they got from the companies that do. It would be nice to see which set of irons/putters,etc. were sent in, since most OEM's don't send in the entire line.I don’t know everything that was provided by the manufacturers unless I ask or by looking through the lineup of clubs that are laying around. Since players and players distance testing hasn’t started, They are still in the storage area. I mostly look at the putters so I have a pretty good idea of what has been provided in that area. Generally manufacturers send stuff from their new line. Some send more others send less, they work with Sam to figure it out. Manufacturers release schedules and MGS deadlines also influence what can be in the testing. The Sub70 person that posts can probably answer the question on what was provided better than I can. GolfSub70 1 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: Paradym AI Smoke Max HL 16.5* w/MCA TENSEI AV Series Blue Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/Accra iWedge 90 Graphite Putter: Render w/VA Composites Baddazz Backup Putters: Sacks Parente MC 3 Stripe, Milled Collection RSX 2 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
GolfSub70 Posted March 7, 2019 Share Posted March 7, 2019 The 699 and 639 irons were submitted. My understanding is that we also submitted fairway woods, hybrids and wedges. Not sure on putters. We're definitely looking forward to the upcoming results and think that given the right specs/shafts the clubs perform similarly to anything else out there. newballcoach, MattF, cnosil and 2 others 5 Quote Link to comment Share on other sites More sharing options...
GolfSub70 Posted March 7, 2019 Share Posted March 7, 2019 Re: the offsets... 639 CB irons are as follows: 3 - 3.5mm 4 - 3mm 5 - 2.75mm 6 - 2.5mm 7 - 2.25mm 8 - 2.25mm 9 - 2mm PW 1.75mm 739 Irons are as follows: 4 - 5mm 5 - 4.5mm 6 - 4mm 7 - 3.5mm 8 - 3mm 9 - 2mm PW - 2mm AW - 1mm SW - 0.5mm newballcoach, Waazzupppp, JAGolfore and 3 others 6 Quote Link to comment Share on other sites More sharing options...
cnosil Posted March 8, 2019 Share Posted March 8, 2019 6 hours ago, GolfSub70 said: The 699 and 639 irons were submitted. My understanding is that we also submitted fairway woods, hybrids and wedges. Not sure on putters. We're definitely looking forward to the upcoming results and think that given the right specs/shafts the clubs perform similarly to anything else out there. I am pretty familiar with the putters in the test and there weren't any sub70 putters. GolfSub70 and JAGolfore 2 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: Paradym AI Smoke Max HL 16.5* w/MCA TENSEI AV Series Blue Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/Accra iWedge 90 Graphite Putter: Render w/VA Composites Baddazz Backup Putters: Sacks Parente MC 3 Stripe, Milled Collection RSX 2 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
Sluggo42 Posted March 8, 2019 Author Share Posted March 8, 2019 My wedges were really nice today as I’m getting more used to them. really nice... GolfSub70, MattF, JAGolfore and 1 other 4 Quote TSr2 on tensi blue stiff Speedzone 3-wood on Tensi blue S Epic Max 5 and 7 woods on HZRDUS Reg flex Paradym 9 wood on HZRDUS reg flex P770 / P790 combo set on Ventus R-6 shafts 6-AW T22 Denim Copper 54°, 58° on Kinetic X Trajectory ER3 or, E.A.S. #4 (“Fang” or “Adele”) ProV1x, or, Maxfli Tour X .Org 14 cart bag Adidas Tour 360 , or Sketcher shoes Link to comment Share on other sites More sharing options...
Sluggo42 Posted March 9, 2019 Author Share Posted March 9, 2019 After 8 rounds now... awesome stix... JohnSmalls, Waazzupppp, GB13 and 4 others 7 Quote TSr2 on tensi blue stiff Speedzone 3-wood on Tensi blue S Epic Max 5 and 7 woods on HZRDUS Reg flex Paradym 9 wood on HZRDUS reg flex P770 / P790 combo set on Ventus R-6 shafts 6-AW T22 Denim Copper 54°, 58° on Kinetic X Trajectory ER3 or, E.A.S. #4 (“Fang” or “Adele”) ProV1x, or, Maxfli Tour X .Org 14 cart bag Adidas Tour 360 , or Sketcher shoes Link to comment Share on other sites More sharing options...
GolfSub70 Posted March 9, 2019 Share Posted March 9, 2019 5 hours ago, Sluggo42 said: My wedges were really nice today as I’m getting more used to them. really nice... Happy to hear you are liking them. Your "after 8 rounds" comment made me want to throw my bag on my back and start walking south though. mpatrickriley, romeopapazulu, MattF and 6 others 9 Quote Link to comment Share on other sites More sharing options...
revkev Posted March 9, 2019 Share Posted March 9, 2019 11 hours ago, GolfSub70 said: Happy to hear you are liking them. Your "after 8 rounds" comment made me want to throw my bag on my back and start walking south though. Any time Sub 70 - Florida is always open. Tazz2293, GolfSub70, JAGolfore and 1 other 4 Quote Driver: Taylor Made Stealth 2 10.5 Diamana S plus 60 R flex - 44.25 Fairways: Ping G410 5, 7, 9 wood Alta CB red 65 R flex Hybrid: Ping G410 26 degree Alta CB Red 70 R flex Irons: Ping G430 7-PW, 45, 50 Alta CB black 65 soft R flex Wedges: Ping 195 S54, E58 Wedges and irons are - 1/2” and one degree flat Putter: Sacks Parente Duke 32.5” Ball: Titleist Pro VI or Callaway Chrome Soft X ls While not at the same time I was fit for every club in my bag as well as the Pro VI ball. I use the chrome soft x ls on my league course. It has much softer softer greens than the club that I belong to. I’m on a mission to shoot my age - lifetime lowest round is 66 and I’m currently 67. Link to comment Share on other sites More sharing options...
PMookie Posted March 9, 2019 Share Posted March 9, 2019 639 CB 7 iron.... One word: wow. I got to hit balls at the range and the club was great! Great feel, consistency, FORGIVENESS, and nice flight window! Really nice! I was shocked at how forgiving they are, and I was hitting center-of-face 90% of the time. Really nice. I just kept saying to myself, “Dang, this club is straight!”I emailed Jason and told him that at address, the offset, and shape of the club remind me a lot of the MacGregor VIP 7 iron blade I have! These ones: Sent from my iPhone using Tapatalk Pro GolfSub70, GolfSpy_BNG, Kenny B and 6 others 9 Quote Driver: Ping G430 Max 9*, Ping Tour 70X Fairway: Ping G425 15*, Ping Tour 70X Hybrid: Ping G425 22*, Ping Tour 80X Irons: Ping i230 4-GW, TT DG X100 Wedges: SMS 50D/54V/58DModus 130 stiff, +1” Putter: EAS 1.0 Ball: Titleist 2023 AVX Link to comment Share on other sites More sharing options...
Popular Post GolfSub70 Posted March 14, 2019 Popular Post Share Posted March 14, 2019 Here are a couple pictures of our newest prototype. The 639-G wouldn't be available until 2020 if we decide to move forward, but I thought I would share. It should fit between the MB and CB...MB profile but a little more forgiving. bens197, JohnSmalls, MattF and 16 others 14 5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.