Jump to content

When woods were made of wood


RobotDoctor
 Share

Recommended Posts

How many here play either occasionally or predominantly woods made of persimmon or maple (laminated)?  While I game modern equipment I occasionally bring out one of my classic persimmon drivers from the 50s (MacGregor) out for a play date.  How many here do this?  I know BigStu does (from interaction on another site).  Here's a few of mine.  These are my 1950-1952 693, 1952-1953 M09 LFF, 1954-1955 M85W and Wood Brothers Texan made for Gene Sauers.

 

 

693 face.jpg

LFF face.jpg

M85W.jpg

Wood Bros Sauers.jpg

  • Like 4

Driver:  TaylorMade 300 Mini 11.5°, Fujikura Ventus Blue 5S

3W:  TaylorMade M4 15°, Graphite Design Tour AD DI 7S

Hybrid:  TaylorMade Sim2 2 Iron Hybrid 17°, Graphite Design Tour AD DI 85S Hybrid 

Irons:  Ben Hogan Icon 4-PW, Nippon Modus3 Tour 120 stiff

GW:  Ben Hogan 1999 Apex blade E (PW) bent to 50°, Nippon Modus3 Tour 120 stiff

SW & LW:  Scratch Golf 1018 forged 56° (bent to 54 degrees) / 58°, Nippon Modus3 Tour 120 stiff

Putter: Byron Morgan custom Epic Day

Ball: Taylormade Tour Preferred (2016 ball)

Bag: Sun Mountain 2.5 stand bag

Link to comment
Share on other sites

I have a few woods to choose from.  There is also a tremendous MacGregor 1950-1952 M43T driver in the MacGregor bag and I have a terrific former gamer MacGregor 1954-1955 945W.  My old Cleveland Classic driver from the late 80s/early 90s with X100 shaft is on the PowerBilt bag.  Included is also my 1954 TP Special driver that I have not taken out.

Office Staff bags.jpg

Cleveland DG43 face.JPG

TP Special face.JPG

TP Special sole.JPG

  • Like 5

Driver:  TaylorMade 300 Mini 11.5°, Fujikura Ventus Blue 5S

3W:  TaylorMade M4 15°, Graphite Design Tour AD DI 7S

Hybrid:  TaylorMade Sim2 2 Iron Hybrid 17°, Graphite Design Tour AD DI 85S Hybrid 

Irons:  Ben Hogan Icon 4-PW, Nippon Modus3 Tour 120 stiff

GW:  Ben Hogan 1999 Apex blade E (PW) bent to 50°, Nippon Modus3 Tour 120 stiff

SW & LW:  Scratch Golf 1018 forged 56° (bent to 54 degrees) / 58°, Nippon Modus3 Tour 120 stiff

Putter: Byron Morgan custom Epic Day

Ball: Taylormade Tour Preferred (2016 ball)

Bag: Sun Mountain 2.5 stand bag

Link to comment
Share on other sites

I do.  My persimmons dont look as good as the OP's do though.  Ive got an old Wilson persimmon driver and a Spalding.  I love the look of them, although I dont hit the ball very high with them.

  • Like 1

"I suppose its better to be a master of 7 than to be vaguely familiar with 14." - Chick Evans

Whats in my Sun Mountain 2.5+ stand bag?

Woods: Tommy Armour Atomic 10.5* 

Hybrid: Mizuno MP Fli-Hi 3H

Irons: Mizuno T-Zoid True 5, 7 and 9-irons

Wedge: Mizuno S18 blue ion 54*

Putter: Mizuno Bettinardi A-02

Ball: Maxfli Tour X

Link to comment
Share on other sites

Wow!  What a beautiful collection of persimmon woods.  I didn't keep any of mine and I now regret that.  I hope to start collecting some older equipment.  

  • Like 1

Ping G425 Max 10.5 with a Tour AD IZ-7 XStiff 

Ping G425 3-wood (14.5 degree)

Ping G425 Hybrid (19 degree)

Mizuno JPX 921 Forged W/Stiff Shafts

Vokey SM8 50.08, 54.14, 58,10

Scotty Cameron Fastback 1.5 (2020)

Pro V1x 

 

Link to comment
Share on other sites

I go on Ebay from time to time and look at persimmon woods.  All of them are so beautiful that I want to buy them all.  In a perfect world, I would have a bag full of persimmon woods, blade irons, hickory shafts and a persimmon putter; but then I remind myself at how underpowered they would be on modern golf courses.

"I suppose its better to be a master of 7 than to be vaguely familiar with 14." - Chick Evans

Whats in my Sun Mountain 2.5+ stand bag?

Woods: Tommy Armour Atomic 10.5* 

Hybrid: Mizuno MP Fli-Hi 3H

Irons: Mizuno T-Zoid True 5, 7 and 9-irons

Wedge: Mizuno S18 blue ion 54*

Putter: Mizuno Bettinardi A-02

Ball: Maxfli Tour X

Link to comment
Share on other sites

My first set of clubs(1959) were hickory shafts....I only have one left, a putter that is mounted on the wall if my home office.

As for persimmon woods, I gamed PowerBilt Citations with Citation blades. They were sweet.


Sent from my iPhone using MyGolfSpy

  • Like 2

Driver: PXG 0211 w/Evenflo Riptide CB Regular shaft 

Fairways:  Cobra King F8 3-4W(16*) & 5-6W(20*) w/Mitsubishi ck Blue regular shaft 

Hybrid: Cobra F8 3 Hybrid(19*) w/Recoil ES regular shaft 

Irons: Wilson D7 5-PW w/Recoil 460 Regular graphite shafts 

Wedges: Cleveland RTX Zipcore(50*/54*/58*) w/True Temper Spinner Wedge steel shaft  

Putter: 33" Evnroll ER2 w/Evnroll Gravity Grip 

Bag: Vice cart bag(Black).  

Pushcart:  Caddytek 3.0 from Costco

Ball: Maxfli Tour CG & Titleist Pro V1x.

 

Link to comment
Share on other sites

1 hour ago, Retrogolfer36 said:

I go on Ebay from time to time and look at persimmon woods.  All of them are so beautiful that I want to buy them all.  In a perfect world, I would have a bag full of persimmon woods, blade irons, hickory shafts and a persimmon putter; but then I remind myself at how underpowered they would be on modern golf courses.

The temptation is huge for sure.  For me there are certain models I am not looking for.  Classic MacGregor woods of the early/mid 1950s.  Pretty basic stuff -  693, M43, 945, M85 and any LFF I can find.  I have pretty solid sets/individual drivers of these and am looking for the perfect specimens if I can find them without paying a kidney for them.  I just picked up this M85W driver for a rather low Buy It Now.  I was kind stunned with the price so I purchased it.  I removed the sole plate and found that this is solid block persimmon.  The driver is 43 inches and comes in at a bit more than D7.  A 43 1/2" shaft would probably make this a D5 driver.  I contacted Dave Wood and he proclaimed this as a deep face M85W and "Rarest of the rare".  This driver is making its way to Texas for a Dave Wood spa treatment this coming week!!!

 

 

M85W face natural light.jpg

M85W crown.JPG

M85W skirt.JPG

M85W sole.JPG

  • Like 3

Driver:  TaylorMade 300 Mini 11.5°, Fujikura Ventus Blue 5S

3W:  TaylorMade M4 15°, Graphite Design Tour AD DI 7S

Hybrid:  TaylorMade Sim2 2 Iron Hybrid 17°, Graphite Design Tour AD DI 85S Hybrid 

Irons:  Ben Hogan Icon 4-PW, Nippon Modus3 Tour 120 stiff

GW:  Ben Hogan 1999 Apex blade E (PW) bent to 50°, Nippon Modus3 Tour 120 stiff

SW & LW:  Scratch Golf 1018 forged 56° (bent to 54 degrees) / 58°, Nippon Modus3 Tour 120 stiff

Putter: Byron Morgan custom Epic Day

Ball: Taylormade Tour Preferred (2016 ball)

Bag: Sun Mountain 2.5 stand bag

Link to comment
Share on other sites

7 hours ago, RobotDoctor said:

The temptation is huge for sure.  For me there are certain models I am not looking for.  Classic MacGregor woods of the early/mid 1950s.  Pretty basic stuff -  693, M43, 945, M85 and any LFF I can find.  I have pretty solid sets/individual drivers of these and am looking for the perfect specimens if I can find them without paying a kidney for them.  I just picked up this M85W driver for a rather low Buy It Now.  I was kind stunned with the price so I purchased it.  I removed the sole plate and found that this is solid block persimmon.  The driver is 43 inches and comes in at a bit more than D7.  A 43 1/2" shaft would probably make this a D5 driver.  I contacted Dave Wood and he proclaimed this as a deep face M85W and "Rarest of the rare".  This driver is making its way to Texas for a Dave Wood spa treatment this coming week!!!

 

 

M85W face natural light.jpg

M85W crown.JPG

M85W skirt.JPG

M85W sole.JPG

Those are some beautiful woods.  I just scored a set of Mizuno MS-5 persimmons.  Drive and 5-wood.  I'll had to post up some pics when they get here.  I also scored an old Mizuno mallet putter with a brass insert.  I believe that the persimmons and the putter are from the late '80s.

"I suppose its better to be a master of 7 than to be vaguely familiar with 14." - Chick Evans

Whats in my Sun Mountain 2.5+ stand bag?

Woods: Tommy Armour Atomic 10.5* 

Hybrid: Mizuno MP Fli-Hi 3H

Irons: Mizuno T-Zoid True 5, 7 and 9-irons

Wedge: Mizuno S18 blue ion 54*

Putter: Mizuno Bettinardi A-02

Ball: Maxfli Tour X

Link to comment
Share on other sites

Since our course opened in 1906, it's completely playable with hickory shafts, never mind real wooden club heads.

I had no trouble adjusting to the first metalwoods like the original TaylorMade series, the Hogan Series 56 model, and the venerable Titlest PTs.

Veteran players will remember that these were essentially copies of the persimmon / laminated maple woods except that they were made of hollow stainless steel.

When metalwoods began to take on their own personalities, they changed in more ways than just adding a lot of tech.  They became longer, more upright, had larger heads, and the higher lofts tended to have closed faces.   That's when I started to struggle with them.

Louisville Golf no longer works in laminated maple, but they still offer a nice selection of persimmon woods.  They come with graphite shafts, hickory shafts, and while they last, steel shafts. Steel shafts for woods were discontinued by True Temper in 2017, but some remain in Louisville's stock.

If you play at 7000+ yards, persimmon probably won't cut it.  Otherwise it does have things to offer.

The clubs are shorter with flatter lie angles and more open faces if that suits you.  The available lofts are wider spaced.  You might not want a 16.5º metal four wood and an 18º metal five wood.  However, an 18º persimmon 4-wood and a 21º persimmon 5-wood could very well be found in the same bag.

Another thing is that wooden clubheads are more easily customizable for fit metrics.  For fifty extra bucks, you get any loft, lie angle, and face angle that you want.  They're merely lathing wood.  Choices in finishes and inserts are available too.

If I could still play, I'd be very tempted to go with a Louisville 2, 4, 5 set.  It would be perfectly functional at our old club.  I'm more than old enough for it not to be something radically new to which I'd have to adapt. 

 

PS: My first set of woods were MacGregor 945s handed down to me by my uncle.  They're not in playable condition, but I still have them.

Edited by NiftyNiblick
  • Like 2

 

 

 

 

Link to comment
Share on other sites

4 hours ago, NiftyNiblick said:

Since our course opened in 1906, it's completely playable with hickory shafts, never mind real wooden club heads.

I had no trouble adjusting to the first metalwoods like the original TaylorMade series, the Hogan Series 56 model, and the venerable Titlest PTs.

Veteran players will remember that these were essentially copies of the persimmon / laminated maple woods except that they were made of hollow stainless steel.

When metalwoods began to take on their own personalities, they changed in more ways than just adding a lot of tech.  They became longer, more upright, had larger heads, and the higher lofts tended to have closed faces.   That's when I started to struggle with them.

Louisville Golf no longer works in laminated maple, but they still offer a nice selection of persimmon woods.  They come with graphite shafts, hickory shafts, and while they last, steel shafts. Steel shafts for woods were discontinued by True Temper in 2017, but some remain in Louisville's stock.

If you play at 7000+ yards, persimmon probably won't cut it.  Otherwise it does have things to offer.

The clubs are shorter with flatter lie angles and more open faces if that suits you.  The available lofts are wider spaced.  You might not want a 16.5º metal four wood and an 18º metal five wood.  However, an 18º persimmon 4-wood and a 21º persimmon 5-wood could very well be found in the same bag.

Another thing is that wooden clubheads are more easily customizable for fit metrics.  For fifty extra bucks, you get any loft, lie angle, and face angle that you want.  They're merely lathing wood.  Choices in finishes and inserts are available too.

If I could still play, I'd be very tempted to go with a Louisville 2, 4, 5 set.  It would be perfectly functional at our old club.  I'm more than old enough for it not to be something radically new to which I'd have to adapt. 

 

PS: My first set of woods were MacGregor 945s handed down to me by my uncle.  They're not in playable condition, but I still have them.

Would love to see pictures of the 945s!

Driver:  TaylorMade 300 Mini 11.5°, Fujikura Ventus Blue 5S

3W:  TaylorMade M4 15°, Graphite Design Tour AD DI 7S

Hybrid:  TaylorMade Sim2 2 Iron Hybrid 17°, Graphite Design Tour AD DI 85S Hybrid 

Irons:  Ben Hogan Icon 4-PW, Nippon Modus3 Tour 120 stiff

GW:  Ben Hogan 1999 Apex blade E (PW) bent to 50°, Nippon Modus3 Tour 120 stiff

SW & LW:  Scratch Golf 1018 forged 56° (bent to 54 degrees) / 58°, Nippon Modus3 Tour 120 stiff

Putter: Byron Morgan custom Epic Day

Ball: Taylormade Tour Preferred (2016 ball)

Bag: Sun Mountain 2.5 stand bag

Link to comment
Share on other sites

My Mizzy persimmons arrived today. I must admit, they're better than I expected.20200401_155944.jpg20200401_155931.jpg20200401_155922.jpg20200401_155914.jpg20200401_160006.jpg

Sent from my SM-G960U using Tapatalk

  • Like 2

"I suppose its better to be a master of 7 than to be vaguely familiar with 14." - Chick Evans

Whats in my Sun Mountain 2.5+ stand bag?

Woods: Tommy Armour Atomic 10.5* 

Hybrid: Mizuno MP Fli-Hi 3H

Irons: Mizuno T-Zoid True 5, 7 and 9-irons

Wedge: Mizuno S18 blue ion 54*

Putter: Mizuno Bettinardi A-02

Ball: Maxfli Tour X

Link to comment
Share on other sites

21 minutes ago, Retrogolfer36 said:

My Mizzy persimmons arrived today. I must admit, they're better than I expected.20200401_155944.jpg20200401_155931.jpg20200401_155922.jpg20200401_155914.jpg20200401_160006.jpg

Sent from my SM-G960U using Tapatalk
 

Nice looking Mizunos!

 

MDGolfHacker

  • Like 1

What's In This Lefty's Bag?

Driver: :cobra-small: F8 9.5° Project X Even Flow Blue 65g shaft 

Fairway Woods: :cobra-small: F8 3W Project X Even Flow Blue 75g shaft

Fairway Woods: :cobra-small: F8 5W Project X Even Flow Blue 75g shaft

Hybrid: :titelist-small: 816H2 19°

Irons: :mizuno-small: MP-20 SEL Project X 5.5 shafts 5-PW

           :mizuno-small: MP-20 HMB Project X 5.5 shaft 4 Iron

Wedge: :cleveland-small: Tour Satin RTX 4 Wedges in 52° and 56° 2 Dot

Putter: :nevercompromise-small: Gray Matter TDP 2.2 32.75"

Bag: :1590477705_SunMountain: Three 5

Ball:  :titelist-small:  PRO V1X

RangeFinder:918457628_PrecisionPro: NX7 Pro

Social Media:

Facebook:   md golfhacker
Twitter:        @mdgolfhacker
Instagram:   mdgolfhacker

 Currently Testing: :skycaddie: LX5 Watch

Link to comment
Share on other sites

My plan for 2020 season is to play classic/retro golf exclusively, at least to start.  I have a fair number of Ram persimmons, befitting my Ram Ho status.  Over the off-season, decided to pick up a 1/3/4 set of Orlimar persimmons, plan is to start with the driver and 3w from this set, mix in the 4w where I'd care to.

Have a Ram TW800, TW801, TW802, and TW805, and a couple other Golden Rams in there.  Also have a Louisville Smart Driver and a Personal Model, a MacGregor M09T Jumbo (80s reissue), and John Deere 150th anniversary commemorative driver, and driver/3w in both Eye2 and Zing Blonde.

I only started playing golf in the late 90s, I didn't have any experience with actual wood clubs until I bought a Louisville Smart Driver in the early 2000s.  Became intrigued when I took it on the course and found I was hitting it as far as my Ti driver at the time.  And here we are.

I'll have to scrounge up some pics....

Edited by NRJyzr

Driver: TM Original One 11.5* set to 10*, Aldila RIP Alpha 80 X, 43.5" -or- King LTD, ProtoPype 80X, 43.25"
3w:  Cobra King LTD, RIP Beta 90, 42"
2h or 3h:  TaylorMade Stage 2 Tour, Aldila NV105 S
Irons:  3-PW Mizuno MP37, Recoil Proto 125 F4 (reshaft in progress, slowly); 1i & 3-PW Golden Ram TW276, NV105 S; TBD iron set, RIP Tour 115 R
GW: Dynacraft Dual Milled CNC 52*, Steelfiber 125 S; Scratch 8620 DS 53*, Steelfiber 125 S
SW:  Ram TG-898 56*, DGX ss2x; Ram Tom Watson 55*, DGX ss2x; Wilson Staff PMP 58*, DGS; PM Grind 19 58*, stock shaft
Putter:  Mizuno TPM-2, 34"
Ball:  Wilson Staff Duo Professional, TM TP5, Kirkland Signature 3pc v2

Link to comment
Share on other sites

Some pics of a few of mine

From top to bottom, Louisville Smart Driver, Ram TW805, Ram TW801, Ram TW802

image.png.19dba2fc59f1110462f46ad3d8fd3321.png

My set of Orlimar 1/3/4
image.png.63cc4df50885dc725df8eb0edc7c4da6.png

And a sole/face shot of the four in the first pic, with my John Deere Commemorative added

image.png.b165ad9f3d09d3675fee1f6a3461ffab.png

Driver: TM Original One 11.5* set to 10*, Aldila RIP Alpha 80 X, 43.5" -or- King LTD, ProtoPype 80X, 43.25"
3w:  Cobra King LTD, RIP Beta 90, 42"
2h or 3h:  TaylorMade Stage 2 Tour, Aldila NV105 S
Irons:  3-PW Mizuno MP37, Recoil Proto 125 F4 (reshaft in progress, slowly); 1i & 3-PW Golden Ram TW276, NV105 S; TBD iron set, RIP Tour 115 R
GW: Dynacraft Dual Milled CNC 52*, Steelfiber 125 S; Scratch 8620 DS 53*, Steelfiber 125 S
SW:  Ram TG-898 56*, DGX ss2x; Ram Tom Watson 55*, DGX ss2x; Wilson Staff PMP 58*, DGS; PM Grind 19 58*, stock shaft
Putter:  Mizuno TPM-2, 34"
Ball:  Wilson Staff Duo Professional, TM TP5, Kirkland Signature 3pc v2

Link to comment
Share on other sites

Here are the woods in my MacGregor staff bag.  Most are MacGregors but also in there are other makes. A Wood Brothers driver made for Gene Sauers, a custom Mike Coppola (my former club restoration person in Delaware), my Cleveland Classic DG43 gamer from 1990-1992.  I am missing my new M85W driver and 693 fairway woods (2-4) which are in the hands of Dave Wood going through their restoration process presently.  I am also missing my 945W fairway woods that will be restored next year along with my 945W driver.  I will have the M85W fairway woods (2-3) restored as well at some point and the gloss of my M85W taken down to satin.  The graphite shaft is a prototype Graphite Design that is 3X and made for Greg Norman.  It was given to me by a Class A PGA pro who is well connected with a former PGA Tour caddy.

 

Mac Staff Bag.jpg

Edited by RobotDoctor
  • Like 3

Driver:  TaylorMade 300 Mini 11.5°, Fujikura Ventus Blue 5S

3W:  TaylorMade M4 15°, Graphite Design Tour AD DI 7S

Hybrid:  TaylorMade Sim2 2 Iron Hybrid 17°, Graphite Design Tour AD DI 85S Hybrid 

Irons:  Ben Hogan Icon 4-PW, Nippon Modus3 Tour 120 stiff

GW:  Ben Hogan 1999 Apex blade E (PW) bent to 50°, Nippon Modus3 Tour 120 stiff

SW & LW:  Scratch Golf 1018 forged 56° (bent to 54 degrees) / 58°, Nippon Modus3 Tour 120 stiff

Putter: Byron Morgan custom Epic Day

Ball: Taylormade Tour Preferred (2016 ball)

Bag: Sun Mountain 2.5 stand bag

Link to comment
Share on other sites

  • 4 weeks later...

I've got three rounds in now.  All three rounds have been played with the Orlimar driver and 3w shown in the pics above.  It's been interesting, I've had contact consistency problems with the driver, but have been consistent making contact with the 3w.  Even have hit the 3w off the deck a few times with no trouble.  

I'll either keep these in the bag, or pull out a couple Ram persimmons; I've been hitting the Orlimar surprisingly higher than I was expecting, might try my Ram TW802, which is a little lower loft.

Yesterday after hitting my tee shot on #17, had a guy peek around the corner of the pine trees that separated 17th tee from 12th tee.  He'd heard the sound, wanted to know how old my driver was, and how I liked playing it.  Found that interesting, can't remember that happening before.  🙂

  • Like 2

Driver: TM Original One 11.5* set to 10*, Aldila RIP Alpha 80 X, 43.5" -or- King LTD, ProtoPype 80X, 43.25"
3w:  Cobra King LTD, RIP Beta 90, 42"
2h or 3h:  TaylorMade Stage 2 Tour, Aldila NV105 S
Irons:  3-PW Mizuno MP37, Recoil Proto 125 F4 (reshaft in progress, slowly); 1i & 3-PW Golden Ram TW276, NV105 S; TBD iron set, RIP Tour 115 R
GW: Dynacraft Dual Milled CNC 52*, Steelfiber 125 S; Scratch 8620 DS 53*, Steelfiber 125 S
SW:  Ram TG-898 56*, DGX ss2x; Ram Tom Watson 55*, DGX ss2x; Wilson Staff PMP 58*, DGS; PM Grind 19 58*, stock shaft
Putter:  Mizuno TPM-2, 34"
Ball:  Wilson Staff Duo Professional, TM TP5, Kirkland Signature 3pc v2

Link to comment
Share on other sites

6 hours ago, NRJyzr said:

I've got three rounds in now.  All three rounds have been played with the Orlimar driver and 3w shown in the pics above.  It's been interesting, I've had contact consistency problems with the driver, but have been consistent making contact with the 3w.  Even have hit the 3w off the deck a few times with no trouble.  

I'll either keep these in the bag, or pull out a couple Ram persimmons; I've been hitting the Orlimar surprisingly higher than I was expecting, might try my Ram TW802, which is a little lower loft.

Yesterday after hitting my tee shot on #17, had a guy peek around the corner of the pine trees that separated 17th tee from 12th tee.  He'd heard the sound, wanted to know how old my driver was, and how I liked playing it.  Found that interesting, can't remember that happening before.  🙂

There is a different sound with the ball striking a wooden club.  Instead of the metallic "ting" sound it is more like a "thwock".  I have a few dozen new old stock Titleist Balata golf balls that have lost much compression so the sound is a bit more muted but the feel ...... oh baby!  I love the reaction of my young playing partners when they see one of my classic MacGregors coming out of the bag.  They want to hit it and I always say sure as long as any deformation that happens they pay to refinish my wood.  They ask how much and I say between $150 and $200 just to clean up any scratches or pit marks.   Every time the young kids say thanks but no thanks.  I then tell them to look on eBay and search for persimmon driver and they can get one for little to nothing.  I hope some have and find the love of persimmon like we do.

  • Like 1

Driver:  TaylorMade 300 Mini 11.5°, Fujikura Ventus Blue 5S

3W:  TaylorMade M4 15°, Graphite Design Tour AD DI 7S

Hybrid:  TaylorMade Sim2 2 Iron Hybrid 17°, Graphite Design Tour AD DI 85S Hybrid 

Irons:  Ben Hogan Icon 4-PW, Nippon Modus3 Tour 120 stiff

GW:  Ben Hogan 1999 Apex blade E (PW) bent to 50°, Nippon Modus3 Tour 120 stiff

SW & LW:  Scratch Golf 1018 forged 56° (bent to 54 degrees) / 58°, Nippon Modus3 Tour 120 stiff

Putter: Byron Morgan custom Epic Day

Ball: Taylormade Tour Preferred (2016 ball)

Bag: Sun Mountain 2.5 stand bag

Link to comment
Share on other sites

1 minute ago, RobotDoctor said:

There is a different sound with the ball striking a wooden club.  Instead of the metallic "ting" sound it is more like a "thwock".  I have a few dozen new old stock Titleist Balata golf balls that have lost much compression so the sound is a bit more muted but the feel ...... oh baby!  I love the reaction of my young playing partners when they see one of my classic MacGregors coming out of the bag.  They want to hit it and I always say sure as long as any deformation that happens they pay to refinish my wood.  They ask how much and I say between $150 and $200 just to clean up any scratches or pit marks.   Every time the young kids say thanks but no thanks.  I then tell them to look on eBay and search for persimmon driver and they can get one for little to nothing.  I hope some have and find the love of persimmon like we do.

 

I've got a sleeve of HT-100s and a dozen Elite 90s that I plan on using sooner rather than later.  Waiting for my game to show some signs of life before I take out the good stuff.  😉

 

  • Like 1

Driver: TM Original One 11.5* set to 10*, Aldila RIP Alpha 80 X, 43.5" -or- King LTD, ProtoPype 80X, 43.25"
3w:  Cobra King LTD, RIP Beta 90, 42"
2h or 3h:  TaylorMade Stage 2 Tour, Aldila NV105 S
Irons:  3-PW Mizuno MP37, Recoil Proto 125 F4 (reshaft in progress, slowly); 1i & 3-PW Golden Ram TW276, NV105 S; TBD iron set, RIP Tour 115 R
GW: Dynacraft Dual Milled CNC 52*, Steelfiber 125 S; Scratch 8620 DS 53*, Steelfiber 125 S
SW:  Ram TG-898 56*, DGX ss2x; Ram Tom Watson 55*, DGX ss2x; Wilson Staff PMP 58*, DGS; PM Grind 19 58*, stock shaft
Putter:  Mizuno TPM-2, 34"
Ball:  Wilson Staff Duo Professional, TM TP5, Kirkland Signature 3pc v2

Link to comment
Share on other sites

5 minutes ago, NRJyzr said:

 

I've got a sleeve of HT-100s and a dozen Elite 90s that I plan on using sooner rather than later.  Waiting for my game to show some signs of life before I take out the good stuff.  😉

 

No kidding!!!  My home course (across the street) has been closed due to Covid-19 lock down.  The course might open next week as Colorado is relaxing some of the restriction.  Then I can hit some balls to break off the rust off my old bones and play a few rounds.  Then the Macs and balatas will come out.  Weather forecast next week is mid 70s to low 80s next week with one day reaching 87.  Since I am not working I want to be playing golf!!!

  • Like 1

Driver:  TaylorMade 300 Mini 11.5°, Fujikura Ventus Blue 5S

3W:  TaylorMade M4 15°, Graphite Design Tour AD DI 7S

Hybrid:  TaylorMade Sim2 2 Iron Hybrid 17°, Graphite Design Tour AD DI 85S Hybrid 

Irons:  Ben Hogan Icon 4-PW, Nippon Modus3 Tour 120 stiff

GW:  Ben Hogan 1999 Apex blade E (PW) bent to 50°, Nippon Modus3 Tour 120 stiff

SW & LW:  Scratch Golf 1018 forged 56° (bent to 54 degrees) / 58°, Nippon Modus3 Tour 120 stiff

Putter: Byron Morgan custom Epic Day

Ball: Taylormade Tour Preferred (2016 ball)

Bag: Sun Mountain 2.5 stand bag

Link to comment
Share on other sites

What a great topic!

In the early 80's I was in college and got assigned a roommate that was a golf nut. He convinced me to try and get a set of clubs, as the university 

had its own course and students could buy a pass, for the entire year, as many holes as you could play, for $20!!!!

I mentioned to the parental units, who hooked me up with my recently passed grandfathers clubs. He was good, and normally played 18-36 holes a day when he could, right up until he passed. 

Powerbilt Citation irons, Wilson 1200LT woods, a simple blade putter, don't remember the wedges.

After I graduated, I gave the set to my uncle in a weak moment after hearing him talk about wanting his daddy's clubs. 

I loved that set, and have even priced the irons on ebay. Are 80's vintage Powerbilt irons competitive today?

Man I'm stoopid sometimes.

ksted

  • driver: Ping G410 plus
  • 3 wood: Ping G400
  • 5 wood: Ping G400
  • hybrid: Cobra F8
  • irons: Ping G400 4-gw
  • wedges: Ping G400 U 50, Cleveland RTX4 56, Zipcore 60
  • putter: Evnroll ER2
  • balls:  Srixon Q Star Tour/Titleist Tour Soft
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...