Club Champion

[jlukes 12,536]

I though C.C. was 100% satisfaction guaranteed? You should be able to get your fee back.

They didn't end up charging him for the assembly (probably at the direction of corporate)

[JTexGolfer 1,038]

I've never heard of them. Can you give me some additional insight as far as club and shaft options they have available and the fitting process that lead you see that big of a distance gain? They're pricing and concept is the same, but now I'm curious.

They work with long drive golfers and have any head or shaft that you can think of. Very nice operation and they are completely brand agnostic. My gains were with my G400 driver. Changed from a Ping Tour 65S to an ATTAS Punch 6S. Major Bell did my fitting and I was very impressed.

[ThatKyle 188]

I've pretty much mentally moved on from it all, but maybe I should circle back to the issue with them when I have an extra few minutes to call up their hq. 

 

Yeah, that is complete unacceptable for the amount they charge for a fitting.  it's not cheap so you are right to expect undivided attention  the entire time.  Both times I've been fit at CC they had at least two people there, one to answer the phones etc while the other was doing fittings.

 

I would reach out to the corporate office with your feedback, sounds like some changes need to be made at that store. 

[Kegger 449]

Have an iron fitting scheduled for this morning! Looking forward to seeing the results and to see how the iron fitting stacks up to the driver fitting I had back in March. Wish me luck!

 

Sent from my SAMSUNG-SM-G930A using Tapatalk

[PING Apologist #9 4,561]

Have an iron fitting scheduled for this morning! Looking forward to seeing the results and to see how the iron fitting stacks up to the driver fitting I had back in March. Wish me luck!

 

Sent from my SAMSUNG-SM-G930A using Tapatalk

Good luck Kegger! Looking forward to hearing the results and then how they do out there on the links!

[tommc23 8,518]

Good luck. I'd like to do a fitting just to see if I picked the right shaft for my irons or not

 

Sent from my SM-G950U using Tapatalk

[Kegger 449]

So I don't have any of the files from the fitting yet, but the results of the fitting were: Taylormade P790 (0.5° upright) in Aerotech SteelFiber i110 shafts. I also hit Ping i200, Callaway Rogue Pro, Titleist AP3, and Srixon z565 in a range of different shafts from Nippon, KBS, and Aerotech.

 

The interesting thing for me was the lie angle. My previous set were 2° flat (actual measured lie angles were between 1.5 - 2.0° flatter than standard lie for the P790) and up until today, I had always been fit flat. But after being put into an upright head, my ball flight straitened out, my smash increased, and overall, it just felt more solid. Another thing worth noting was my backspin.. I have never considered myself a high spin player, but Trackman says otherwise! I saw a lot of spin rates above 7k with my 6i (maybe that's where my distance has gone!). We didn't get the spin down as much as I would have liked to see, so I'll need to keep working on that.

[ole gray 16,263]

So I don't have any of the files from the fitting yet, but the results of the fitting were: Taylormade P790 (0.5° upright) in Aerotech SteelFiber i110 shafts. I also hit Ping i200, Callaway Rogue Pro, Titleist AP3, and Srixon z565 in a range of different shafts from Nippon, KBS, and Aerotech.

 

The interesting thing for me was the lie angle. My previous set were 2° flat (actual measured lie angles were between 1.5 - 2.0° flatter than standard lie for the P790) and up until today, I had always been fit flat. But after being put into an upright head, my ball flight straitened out, my smash increased, and overall, it just felt more solid. Another thing worth noting was my backspin.. I have never considered myself a high spin player, but Trackman says otherwise! I saw a lot of spin rates above 7k with my 6i (maybe that's where my distance has gone!). We didn't get the spin down as much as I would have liked to see, so I'll need to keep working on that.

I hope you see the same results as I did on the course. I hit my new club even better on green grass which tells the real story. Good on you for getting fit!

 

 

Sent from my iPhone using MyGolfSpy

[MDGolfHacker 6,974]

So I don't have any of the files from the fitting yet, but the results of the fitting were: Taylormade P790 (0.5° upright) in Aerotech SteelFiber i110 shafts. I also hit Ping i200, Callaway Rogue Pro, Titleist AP3, and Srixon z565 in a range of different shafts from Nippon, KBS, and Aerotech.

 

The interesting thing for me was the lie angle. My previous set were 2° flat (actual measured lie angles were between 1.5 - 2.0° flatter than standard lie for the P790) and up until today, I had always been fit flat. But after being put into an upright head, my ball flight straitened out, my smash increased, and overall, it just felt more solid. Another thing worth noting was my backspin.. I have never considered myself a high spin player, but Trackman says otherwise! I saw a lot of spin rates above 7k with my 6i (maybe that's where my distance has gone!). We didn't get the spin down as much as I would have liked to see, so I'll need to keep working on that.

 

That just shows you what a correct fitting will do for you. Always made me wonder, especially as a lefty, if I ever got fitted correctly. I have enough issues with the Indian, let along worrying about the arrows. Sounds like a quality fitting!

 

 

 

MDGolfHacker

[Rickp 18,150]

I hope you see the same results as I did on the course. I hit my new club even better on green grass which tells the real story. Good on you for getting fit!

 

 

Sent from my iPhone using MyGolfSpy

All good stuff. Next club/clubs I get I will go to a decent club fitter. I still feel that something isn't quite right with my iron setup.

 

 

Sent from my iPhone using MyGolfSpy

[ole gray 16,263]

All good stuff. Next club/clubs I get I will go to a decent club fitter. I still feel that something isn't quite right with my iron setup.

 

 

Sent from my iPhone using MyGolfSpy

I finally got use to my correct fitting with my Steelheads and LOVE em! I've never hit any set of irons better. Sweet is an understatement and they're LONG!!!

 

 

Sent from my iPhone using MyGolfSpy

[Rickp 18,150]

I finally got use to my correct fitting with my Steelheads and LOVE em! I've never hit any set of irons better. Sweet is an understatement and they're LONG!!!

 

 

Sent from my iPhone using MyGolfSpy

What shaft setup do you have now with the Steely's?

 

 

Sent from my iPhone using MyGolfSpy

[ole gray 16,263]

What shaft setup do you have now with the Steely's?

 

 

Sent from my iPhone using MyGolfSpy

True Temper XP95 steel shafts in regular flex. I thought they were hurting my wrists and now I'm pretty sure it has something to do with the mouse I was using on my laptop. I bought a new fancy mouse and my wrist pain has diminished. Blame it on the golf clubs huh

 

 

Sent from my iPhone using MyGolfSpy

[PING Apologist #9 4,561]

I finally got use to my correct fitting with my Steelheads and LOVE em! I've never hit any set of irons better. Sweet is an understatement and they're LONG!!!

 

 

Sent from my iPhone using MyGolfSpy

That may be next on my wish list too. As I develop, I can sure see a time in the near future where I'll outgrow my "Game Improvement" irons and wedges. That oughta be exciting-the iBlades look super sweet and I'd love me a Glide 2.0 wedge or three...  

[Rickp 18,150]

True Temper XP95 steel shafts in regular flex. I thought they were hurting my wrists and now I'm pretty sure it has something to do with the mouse I was using on my laptop. I bought a new fancy mouse and my wrist pain has diminished. Blame it on the golf clubs huh

 

 

Sent from my iPhone using MyGolfSpy

Huh, who knew a computer injury. I'm thinking that steel in regular is the direction I may want to look at. A golf instructor a short while back did not want me to go to graphite maybe he knew something.

 

 

Sent from my iPhone using MyGolfSpy

[ole gray 16,263]

Huh, who knew a computer injury. I'm thinking that steel in regular is the direction I may want to look at. A golf instructor a short while back did not want me to go to graphite maybe he knew something.

 

 

Sent from my iPhone using MyGolfSpy

m

 

 

I'm thinking you will be surprised with the XP95 shafts. Great trajectory and smooth as ya old Ladies butt

 

 

Sent from my iPhone using MyGolfSpy

[cnosil 13,080]

Huh, who knew a computer injury. 

 

 

6000 posts will do that too you.

[ole gray 16,263]

6000 posts will do that too you.

Dayuuummmmm who has 6000 posts!

 

 

Sent from my iPhone using MyGolfSpy

[MDGolfHacker 6,974]

I finally got use to my correct fitting with my Steelheads and LOVE em! I've never hit any set of irons better. Sweet is an understatement and they're LONG!!!

 

 

Sent from my iPhone using MyGolfSpy

 

 

How much longer did you get per club ? 

 

MDGolfHacker

[ole gray 16,263]

How much longer did you get per club ?

 

MDGolfHacker

1/2 inch longer and 2 degrees up

 

Sometimes I look up and think to myself, was that you who just hit that beautiful shot. I'm going low this year. If I can get that short game working this is going to be fun!

 

 

Sent from my iPhone using MyGolfSpy