Rickp Posted May 30, 2021 Share Posted May 30, 2021 5 hours ago, tony@CIC said: Had to replace my water softener in florida - I was getting quotes from $1,500 to 3,000. Went to home Depot and bought their highest capacity for about $700. Took me about an hour to install including moving the old one out. Yup, paid $750 for my water softener/filter. Water Softener salespersons in FL are everywhere, like buying aRolex in NYC on a street corner. tony@CIC, GolfSpy_SHARK, sirchunksalot and 1 other 3 1 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
Chip Strokes Posted May 30, 2021 Share Posted May 30, 2021 3 minutes ago, Rickp said: Yup, paid $750 for my water softener/filter. Water Softener salespersons in FL are everywhere, like buying aRolex in NYC on a street corner. i know a lot of dudes who wore their Bolex proudly in high school MattF, Rickp, sirchunksalot and 2 others 1 4 Quote SIM2 8º | KuroKage XD 70TX SIM 3W 14º | Fujikura Atmos Black Tour Spec 9TX SIM2 5W 18º | Fujikura Ventus Black 10X U500 2i | Fujikura Ventus HB Black 10TX T100 4-PW | Dynamic Gold X7 SM6 52* SM8 56* SM8 60* | Dynamic Gold Tour Issue X100 DW | BGT Stability Tour Link to comment Share on other sites More sharing options...
Rickp Posted May 30, 2021 Share Posted May 30, 2021 1 minute ago, Chip Strokes said: i know a lot of dudes who wore their Bolex proudly in high school 1 minute ago, Chip Strokes said: i know a lot of dudes who wore their Bolex proudly in high school I think they lasted about a week! tony@CIC, GolfSpy_SHARK, Chip Strokes and 1 other 1 3 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
Tom the Golf Nut Posted May 30, 2021 Share Posted May 30, 2021 I thought I had it all figured out. Have three kids, get one into HVAC, one in appliance repair and the last one into carpentry or small engine repair. Well three kids, check. Get them into the above. Not so lucky. The youngest, my daughter is going for Physical Therapy. At least I know I'll get some use from that after I hurt myself doing all the repairs around the house myself! tommc23, MaxEntropy, MattF and 4 others 7 Quote Driver, TSi 1 S Flex 3 wood, Aerojet Max UST Helium Nanocore R Flex 5 wood, Aerojet Max UST Helium Nanocore R Flex 7 Wood, Aerojet Max UST Helium Nanocore R Flex 5 Hybrid King Tec MMT R Flex Irons, Tour UST Recoil 95 R Flex (6 - Gap) Wedges, Snakebite KBS Hi- Rev2.0 54* & 60* Agera 35" Ultralight 14-way Cart Bag Link to comment Share on other sites More sharing options...
yungkory Posted May 30, 2021 Share Posted May 30, 2021 Took down two ugly chandeliers from the previous owners remodel. Put in a ceiling fan and an LED light from Costco while the wife and MIL weeded the backyard. Tomorrow's project is putting in a medicine cabinet in the bathroom, and finishing up cleaning the wires in behind/under the TV stand so they're out of view GolfSpy_SHARK, THEZIPR23, MattF and 5 others 8 Quote Driver: Rogue ST Max LS Tensei AV Blue S 3w/5w: TSi2 Tensei AV Raw Blue S 4h: CLK 22* Hybrid Tensei CK Pro Blue 80HY S Irons 5-PW: 223 Steelfiber PR 95 S Wedges: RTX Zipcore Tour Rack 50, 54, 58 Steelfiber PR 105 Putter: LAB Link.1 Ball: Z-Star Diamond Link to comment Share on other sites More sharing options...
tony@CIC Posted June 7, 2021 Share Posted June 7, 2021 No golf for me this weekend - helped my son start getting his house ready to put on the market. We started with drywalling the kitchen ceiling. The old ceiling was a bit rough so we overlayed it with 1/4" drywall. Doing the same on the walls where plastic tile has already been removed. I'm back there again on wednesday (it's an hour and a half drive each way). yungkory, MaxEntropy, Shapotomous and 4 others 7 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
MattF Posted June 7, 2021 Share Posted June 7, 2021 5 minutes ago, tony@CIC said: No golf for me this weekend - helped my son start getting his house ready to put on the market. We started with drywalling the kitchen ceiling. The old ceiling was a bit rough so we overlayed it with 1/4" drywall. Doing the same on the walls where plastic tile has already been removed. I'm back there again on wednesday (it's an hour and a half drive each way). If you're hiring out your services I "might" have a few things around here that need doing... tony@CIC, Shapotomous and sirchunksalot 3 Quote In the bag: Driver: Darkspeed X 9° UST Mamiya LIN-Q M40X Blue 7F4 Fairway: Apex UW 19° & 21° Project X HZRDUS Smoke RDX Black 5.5 Irons: JPX 923 HMP 5-PW UST Mamiya Recoil 95 F4 Wedges: T-22 Denim Copper 48°, 52° & 56° UST Mamiya Recoil 95 F4 Putter Sycamore 005 Wide Blade Bag: Fairway 14 stand bag Balls: Chrome Tour Cart: CaddyLite ONE Ver. 8 God Bless America, God save the King, God defend New Zealand and thank Christ for Australia! Link to comment Share on other sites More sharing options...
Shapotomous Posted June 8, 2021 Share Posted June 8, 2021 15 hours ago, tony@CIC said: No golf for me this weekend - helped my son start getting his house ready to put on the market. We started with drywalling the kitchen ceiling. The old ceiling was a bit rough so we overlayed it with 1/4" drywall. Doing the same on the walls where plastic tile has already been removed. I'm back there again on wednesday (it's an hour and a half drive each way). I gotta drywall lift in the garage you can borrow for the weekend.....I can't deliver so you'd have to pick it up though. I should really sell it, I hope to never need to use it again. sirchunksalot, tony@CIC and MattF 3 Quote Modern Bag: G410 LST 10.5*, Hzrdus Smoke RDX 6.5 Flex; 915F 3w, Diamana S+ 70 S flex; Snake Eyes 18* 2h, 23* 4h & 27* 5h; JPX 900 Forged 6 - PW, PX LZ 6.0; Edison 2.0 49*, 53*, 57* KBS Tour 120 S; Heppler Fetch; Ball - MTB-X; Bag - Jones MyGolfSpy Edition! Shot Scope H4, MG600 Rangefinder Classic Bag: Driver - Persimmon; 3w - Speed Slot; 5w - Tour Block; 3 - pw - Dynapower; sw - Ram Tom Watson; putter - bullseye standard or flange. Link to comment Share on other sites More sharing options...
tony@CIC Posted June 8, 2021 Share Posted June 8, 2021 3 hours ago, Shapotomous said: I gotta drywall lift in the garage you can borrow for the weekend.....I can't deliver so you'd have to pick it up though. I should really sell it, I hope to never need to use it again. Thx - all done with ceiling. sirchunksalot, MattF and GolfSpy_SHARK 3 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
Popular Post GolfSpy_APH Posted June 8, 2021 Popular Post Share Posted June 8, 2021 We had been working on our back patio to get it all finished up and a friend gave us some wood chairs and wood table free! My partner found some ideas online and we got to redoing them. We still have one bench to finish, but from some old crap chairs and a nice, but boring table this is what we ended up with! StrokerAce, MattF, edingc and 8 others 11 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
MattF Posted June 8, 2021 Share Posted June 8, 2021 Well, apparently I'm going to build something like this for our pool because the Minister took a header after the ladder broke. Nolan220, RollingGreens, GolfSpy_SHARK and 5 others 5 3 Quote In the bag: Driver: Darkspeed X 9° UST Mamiya LIN-Q M40X Blue 7F4 Fairway: Apex UW 19° & 21° Project X HZRDUS Smoke RDX Black 5.5 Irons: JPX 923 HMP 5-PW UST Mamiya Recoil 95 F4 Wedges: T-22 Denim Copper 48°, 52° & 56° UST Mamiya Recoil 95 F4 Putter Sycamore 005 Wide Blade Bag: Fairway 14 stand bag Balls: Chrome Tour Cart: CaddyLite ONE Ver. 8 God Bless America, God save the King, God defend New Zealand and thank Christ for Australia! Link to comment Share on other sites More sharing options...
yungkory Posted June 9, 2021 Share Posted June 9, 2021 8 hours ago, Apolloshowl said: We had been working on our back patio to get it all finished up and a friend gave us some wood chairs and wood table free! My partner found some ideas online and we got to redoing them. We still have one bench to finish, but from some old crap chairs and a nice, but boring table this is what we ended up with! Nice little patio setup there! I like the landscaping too. sirchunksalot, GolfSpy_APH and tony@CIC 3 Quote Driver: Rogue ST Max LS Tensei AV Blue S 3w/5w: TSi2 Tensei AV Raw Blue S 4h: CLK 22* Hybrid Tensei CK Pro Blue 80HY S Irons 5-PW: 223 Steelfiber PR 95 S Wedges: RTX Zipcore Tour Rack 50, 54, 58 Steelfiber PR 105 Putter: LAB Link.1 Ball: Z-Star Diamond Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted June 9, 2021 Share Posted June 9, 2021 1 hour ago, yungkory said: Nice little patio setup there! I like the landscaping too. It's a nice spot for us. We have some big bay doors that open up to our living room which makes our whole place seem triple the size. Plus lots of nice neighbors. tony@CIC and MattF 2 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
Popular Post GolfSpy_SHARK Posted June 17, 2021 Popular Post Share Posted June 17, 2021 Good day in the yard. Just doing a chicken wire fence around the new yard for the dogs to run around in and doing a nicer fence and gate along the back of the house. Step 1 posts today and also got the 2nd veggie garden going StrokerAce, sirchunksalot, MattF and 9 others 12 Quote Check out my reviews: G710 Irons Official Review I MC Shaft & V Series Putter Official Review 2022 Forged Tec's Official Review I Nitron Push Cart Official Review WITB: Weapons of grass destruction (link to WITB) Traverse is filled with all this shiny metal and tracked by RadSpeed 8* - MotoreX F1 6X SIM 3W - Project X HZRDUS Green U505 Driving Iron 17* - Project X HZRDUS Black SpeedZone 4H - Project X HZRDUS Black 2022 King Forged Tec's 4-PW - KBS $ Tape 130 48 (SM8), 52 & 60 (SM7) - Nippon Modus 125 S ER2VI PROV1X #19 Are you a veteran? Check out the Veterans Golf Association (VGA) Thread! Link to comment Share on other sites More sharing options...
Popular Post GolfSpy_APH Posted June 18, 2021 Popular Post Share Posted June 18, 2021 The back area is finally completed! We purchased a large umbrella because it is currently 34 C and doesn't look to be getting any colder anytime soon as well as our grill! Which was an awesome 40% off at the local home depot type store called Jumbo. Now we can relax and enjoy the time outside and with the fence up the dogs can go in and out as they please and watch all the people walking up down and around the area. Also although simple and not anything special I am quite proud of my little bar back left in the photo. Simply took 2 pallets we had from when all out things arrived from Canada and put it together, slapped a cheap wood counter top on it with a nice overhang and spray painted/stained the various parts and tada we have ourselves a little outdoor bar. RollingGreens, Rickp, yungkory and 8 others 9 2 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
sirchunksalot Posted June 19, 2021 Share Posted June 19, 2021 I came home from the range, was sitting around talking to my wife, and heard a noise like something was under the loveseat. The dogs freaked out, so I moved it and found this. I am in no way, shape, form, or fashion an electrician so I ain't confident enough to fix it or diagnose the problem. Right now I'm sitting in my living room while my wife is out buying electrical tape to cover the exposed wires until we can get an electrician out Monday. Gotta love weekends. MDGolfHacker, tony@CIC, Rickp and 6 others 9 Quote Link to comment Share on other sites More sharing options...
tommc23 Posted June 19, 2021 Share Posted June 19, 2021 9 minutes ago, sirchunksalot said: I came home from the range, was sitting around talking to my wife, and heard a noise like something was under the loveseat. The dogs freaked out, so I moved it and found this. I am in no way, shape, form, or fashion an electrician so I ain't confident enough to fix it or diagnose the problem. Right now I'm sitting in my living room while my wife is out buying electrical tape to cover the exposed wires until we can get an electrician out Monday. Gotta love weekends. Yeah that box is screwed. The one wire looks a little sensed also. Get a trip any circuits in your panel? MattF, Rickp, tony@CIC and 2 others 5 Quote Link to comment Share on other sites More sharing options...
GolfSpy_SHARK Posted June 19, 2021 Share Posted June 19, 2021 Just now, tommc23 said: Yeah that box is screwed. The one wire looks a little sensed also. Get a trip any circuits in your panel? Was just about to ask did you lose any power anywhere? curious what’s on that circuit if nothing was plugged into that outket Rickp, tony@CIC and MattF 3 Quote Check out my reviews: G710 Irons Official Review I MC Shaft & V Series Putter Official Review 2022 Forged Tec's Official Review I Nitron Push Cart Official Review WITB: Weapons of grass destruction (link to WITB) Traverse is filled with all this shiny metal and tracked by RadSpeed 8* - MotoreX F1 6X SIM 3W - Project X HZRDUS Green U505 Driving Iron 17* - Project X HZRDUS Black SpeedZone 4H - Project X HZRDUS Black 2022 King Forged Tec's 4-PW - KBS $ Tape 130 48 (SM8), 52 & 60 (SM7) - Nippon Modus 125 S ER2VI PROV1X #19 Are you a veteran? Check out the Veterans Golf Association (VGA) Thread! Link to comment Share on other sites More sharing options...
Rickp Posted June 19, 2021 Share Posted June 19, 2021 Just now, Lacassem said: Was just about to ask did you lose any power anywhere? curious what’s on that circuit if nothing was plugged into that outket I think we all thought of that immediately. tony@CIC and GolfSpy_SHARK 2 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
tony@CIC Posted June 19, 2021 Share Posted June 19, 2021 17 minutes ago, sirchunksalot said: I came home from the range, was sitting around talking to my wife, and heard a noise like something was under the loveseat. The dogs freaked out, so I moved it and found this. I am in no way, shape, form, or fashion an electrician so I ain't confident enough to fix it or diagnose the problem. Right now I'm sitting in my living room while my wife is out buying electrical tape to cover the exposed wires until we can get an electrician out Monday. Gotta love weekends. I'm surprised the breaker didn't blow. You're also very lucky that didn't start a fire. sirchunksalot, MattF, Rickp and 1 other 4 Quote Left Hand orientation SIM 2 D Max with Fujikura Air Speeder Shaft Cobra Radspeed 3W/RIptide Shaft 410 Hybrids 22*, 26* Cobra Speed Zone 6-GP/Recoil ESX 460 F3 Shafts SM7 54* Wedge Glide 3.0 60* Wedge O Works putter V3 NX9-HD - 4 Wheel EZGO TXT 48v cart - too many shoes to list and so many to buy And BAG Boy Golf Balls: Vice Pro Plus 2020 Official Tester Beginning Driver Speed - 78 2019 Official Tester 410 Driver 2018 Official Tester C300 Link to comment Share on other sites More sharing options...
Rickp Posted June 19, 2021 Share Posted June 19, 2021 2 minutes ago, tony@CIC said: I'm surprised the breaker didn't blow. You're also very lucky that didn't start a fire. Yup!! Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
sirchunksalot Posted June 19, 2021 Share Posted June 19, 2021 8 minutes ago, tommc23 said: Yeah that box is screwed. The one wire looks a little sensed also. Get a trip any circuits in your panel? I'm surprised the breaker didn't trip in the fuse box, I'll have to ask the electrician about one when he comes out. 7 minutes ago, Lacassem said: Was just about to ask did you lose any power anywhere? curious what’s on that circuit if nothing was plugged into that outket 6 minutes ago, Rickp said: I think we all thought of that immediately. I didn't lose power at all, the only thing plugged in there was a surge protector and the only thing plugged in it was a USB-C wire. GolfSpy_SHARK, tony@CIC, Nolan220 and 3 others 3 3 Quote Link to comment Share on other sites More sharing options...
sirchunksalot Posted June 19, 2021 Share Posted June 19, 2021 3 minutes ago, tony@CIC said: I'm surprised the breaker didn't blow. You're also very lucky that didn't start a fire. I'm very blessed that it didn't. I think if we hadn't caught it when we did, it could have been bad. GolfSpy_SHARK, Nolan220, MattF and 2 others 5 Quote Link to comment Share on other sites More sharing options...
tommc23 Posted June 19, 2021 Share Posted June 19, 2021 Just now, sirchunksalot said: I'm surprised the breaker didn't trip in the fuse box, I'll have to ask the electrician about one when he comes out. I didn't lose power at all, the only thing plugged in there was a surge protector and the only thing plugged in it was a USB-C wire. That not tripping anything concerns me. tony@CIC, bens197, Rickp and 2 others 5 Quote Link to comment Share on other sites More sharing options...
sirchunksalot Posted June 19, 2021 Share Posted June 19, 2021 Just now, tommc23 said: That not tripping anything concerns me. Me too. Freaks me out. Nolan220, MattF, Rickp and 1 other 4 Quote Link to comment Share on other sites More sharing options...
GolfSpy_SHARK Posted June 19, 2021 Share Posted June 19, 2021 1 minute ago, sirchunksalot said: I'm surprised the breaker didn't trip in the fuse box, I'll have to ask the electrician about one when he comes out. I didn't lose power at all, the only thing plugged in there was a surge protector and the only thing plugged in it was a USB-C wire. Could be more on that entire circuit though, regardless that breaker should have tripped. Might be worth looking at that panel and knocking Whatever breaker that one is tied into off, if you don’t have anything major in it MattF, tony@CIC, tommc23 and 1 other 4 Quote Check out my reviews: G710 Irons Official Review I MC Shaft & V Series Putter Official Review 2022 Forged Tec's Official Review I Nitron Push Cart Official Review WITB: Weapons of grass destruction (link to WITB) Traverse is filled with all this shiny metal and tracked by RadSpeed 8* - MotoreX F1 6X SIM 3W - Project X HZRDUS Green U505 Driving Iron 17* - Project X HZRDUS Black SpeedZone 4H - Project X HZRDUS Black 2022 King Forged Tec's 4-PW - KBS $ Tape 130 48 (SM8), 52 & 60 (SM7) - Nippon Modus 125 S ER2VI PROV1X #19 Are you a veteran? Check out the Veterans Golf Association (VGA) Thread! Link to comment Share on other sites More sharing options...
tommc23 Posted June 19, 2021 Share Posted June 19, 2021 3 minutes ago, Lacassem said: Could be more on that entire circuit though, regardless that breaker should have tripped. Might be worth looking at that panel and knocking Whatever breaker that one is tied into off, if you don’t have anything major in it Definitely what I would do if not fixing it yourself GolfSpy_SHARK, sirchunksalot and tony@CIC 3 Quote Link to comment Share on other sites More sharing options...
GolfSpy_SHARK Posted June 19, 2021 Share Posted June 19, 2021 1 minute ago, tommc23 said: Definitely what I would do if not fixing it yourself 100% sirchunksalot and tony@CIC 2 Quote Check out my reviews: G710 Irons Official Review I MC Shaft & V Series Putter Official Review 2022 Forged Tec's Official Review I Nitron Push Cart Official Review WITB: Weapons of grass destruction (link to WITB) Traverse is filled with all this shiny metal and tracked by RadSpeed 8* - MotoreX F1 6X SIM 3W - Project X HZRDUS Green U505 Driving Iron 17* - Project X HZRDUS Black SpeedZone 4H - Project X HZRDUS Black 2022 King Forged Tec's 4-PW - KBS $ Tape 130 48 (SM8), 52 & 60 (SM7) - Nippon Modus 125 S ER2VI PROV1X #19 Are you a veteran? Check out the Veterans Golf Association (VGA) Thread! Link to comment Share on other sites More sharing options...
Rickp Posted June 19, 2021 Share Posted June 19, 2021 1 hour ago, sirchunksalot said: Me too. Freaks me out. Definitely get it checked out!! tony@CIC and sirchunksalot 2 Quote Rick Left Hand, Driver; PXG 0311XF Cypher 50 gr Senior 5 wood; Ping 425, Senior Shaft 55 gr 7 wood; Ping 425, Senior Shaft 55 gr 5 hybrid; Cally Steelhead, Hazardous R2 Irons; Mizuno JPX 923HM 7-GW Recoil 460 F2 Wedges; Titleist S9 54*, Mizuno SW 56* Putter; Waaay too many to list Link to comment Share on other sites More sharing options...
sirchunksalot Posted June 19, 2021 Share Posted June 19, 2021 42 minutes ago, Rickp said: Definitely get it checked out!! I've got a guy coming Monday that's an electrician, hopefully he can get it back up and running. I've taped the wires off flipped the breaker back on and still got no power to the living room. Breaker' s back off now, I just don't trust it. Now we're without internet, it's set up down here. MattF, bens197, Nolan220 and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.