Similar profile as Pro 2.0?

[Tsax]

Testing new drivers and really liked the Fujikura Pro 2.0 55 Stiff paired with an M5 head. I’m in no hurry to buy a driver (have a lot of new releases to test this year), so I thought I might reshaft my 2016 M2 in the meantime with something similar to the Pro 2.0 at a lower price point (<$100). Any thoughts on a shaft with a similar profile and feel at half the cost?

[03trdblack]

https://mygolfspy.com/shaft-review-fujikura-pro-2-0/

At the bottom of this article it lists some similar shafts as the 2.0 6S.  

SIMILAR SHAFTS – PRO 2.0 (6-S)

Mitsubishi Tensei CK Orange 70-R

• A little heavier and a little softer, Mid launch (vs Mid/Low)

UST VTS Silver 6-S

• A little lighter, ~1/2 flex stiffer, stiffer butt section
• Same launch profile & mid and tip region EI

[Thin2win]

You could also look for a Pro 1.0

It was /is a very good shaft and can be found on the bay for cheap. Also the fujikura atmos blue is very similar. Another shaft that has been out for a few years and you can get used for a good price.