TJ Hall Posted March 9 Share Posted March 9 2 hours ago, TSauer said: On today’s agenda… Post pics when done, those are going to be real nice! dbdors, Rob Person and TSauer 3 Quote TaylorMade SIM 2 Max Driver TaylorMade Stealth 3 wood Titleist U510 Hybrid (3H) TaylorMade Tour Preferred CB Irons Vokey SM8 Wedges (52/56/60) Odyssey Ai-ONE 7S Putter Link to comment Share on other sites More sharing options...
GolfSpy_APH Posted March 9 Author Share Posted March 9 I wonder what my next project should be... Maybe rebuild the 659 TC... Rob Person 1 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
Wieskemp Posted March 9 Share Posted March 9 My dad helped me put together this bag holder for my home Golf Simulator. Came together pretty nice and created a lot more space without having the bags hanging out on the sides with their legs out. Just got to finish the rest of the simulator next... IndyBonzo, BallsLeon, EasyPutter and 6 others 5 4 Quote Driver: Stealth 9* w/ XS Hzrdus Smoke Black Fairway: Stealth 3W 15* w/ XS Hzrdus Smoke Black Irons: P790 2 Iron w/ XS Hzrdus Smoke Black P790 4-6 Iron w/ Project X P770 7-AW XS w/ Project X Wedge: MG3 56* and 60* Putter: 35" Spider GT Splitback Link to comment Share on other sites More sharing options...
cnosil Posted March 9 Share Posted March 9 On 3/5/2024 at 3:13 PM, 03trdblack said: Nice single length build that I did. I 3D printed plastic weight screws for the heavier irons (PW and 9). What is the brand of those; the look nice. Are those heads designed to be single length or did you have to adjust the weights/lofts to make them work? I assume the plastic weight screws were to reduce the weight? Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
cnosil Posted March 9 Share Posted March 9 29 minutes ago, GolfSpy_APH said: I wonder what my next project should be... Maybe rebuild the 659 TC... Put a G400 adapter on your newton shaft before you come to America Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
03trdblack Posted March 9 Share Posted March 9 4 minutes ago, cnosil said: What is the brand of those; the look nice. Are those heads designed to be single length or did you have to adjust the weights/lofts to make them work? I assume the plastic weight screws were to reduce the weight? They come from Logical One Golf and they aren't designed to be single length. You're correct, the plastic screws were to remove all the weight from the 9 and PW. I used heavier screws in the longer irons like the 4 and 5 to get the weight heavier. Then I adjusted the lofts and lie angles to be correct. cnosil, Josh Parker and jbern 3 Quote My bag is a revolving door! Link to comment Share on other sites More sharing options...
Popular Post TSauer Posted March 9 Popular Post Share Posted March 9 (edited) Boom! Before I ordered all the pieces for this build I wasn't sure how I'd like black shafts paired with the brushed steel heads, but man, I love how these turned out. I could build wedge sets all day long. Edited March 9 by TSauer IndyBonzo, dbdors, Nick_D and 8 others 3 1 7 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
cnosil Posted March 9 Share Posted March 9 6 minutes ago, 03trdblack said: They come from Logical One Golf and they aren't designed to be single length. You're correct, the plastic screws were to remove all the weight from the 9 and PW. I used heavier screws in the longer irons like the 4 and 5 to get the weight heavier. Then I adjusted the lofts and lie angles to be correct. Was it just trial and error or did you have some idea of what the weights and lofts needed to be? jbern and IndyBonzo 2 Quote Driver: G400 Max 9* w/ KBS Tour Driven Fairway: TS3 15* w/Project X Hzardous Smoke Hybrids: 915H 21* w/KBS Tour Graphite Hybrid Prototype 915H 24* w/KBS Tour Graphite Hybrid Prototype Irons: TR20V 6-11 w/Vizard TR20-85 Graphite Wedge: 54/12D, 60/8M w/:Accra iWedge 90 Graphite Putter: Sacks Parente MC 3 Stripe Backup Putters: Milled Collection RSX 2, mFGP2, Futura 5W, TM-180 Member: MGS Hitsquad since 2017 Link to comment Share on other sites More sharing options...
TJ Hall Posted March 9 Share Posted March 9 1 minute ago, TSauer said: Boom! Before I ordered all the pieces for this build I wasn't sure how I'd like black shafts paired with the brushed steel heads, but man, I love how these turned out. I could build wedge sets all day long. Those are gorgeous! Always love some Vokey wedges…and an added bonus they are facing the correct way! IndyBonzo, jbern and TSauer 1 1 1 Quote TaylorMade SIM 2 Max Driver TaylorMade Stealth 3 wood Titleist U510 Hybrid (3H) TaylorMade Tour Preferred CB Irons Vokey SM8 Wedges (52/56/60) Odyssey Ai-ONE 7S Putter Link to comment Share on other sites More sharing options...
injectedcutty Posted March 9 Share Posted March 9 Haven't built any clubs lately other than a couple re-grips. Instead I've built a rifle and been working on my muscle car. I don't know what restrictions if any there are about posting gun stuff. IndyBonzo and jbern 2 Quote Scott J PXG Driver, AP2 irons, Cleveland wedges and Odyssey white ice 2.0 Link to comment Share on other sites More sharing options...
03trdblack Posted March 9 Share Posted March 9 (edited) 9 minutes ago, cnosil said: Was it just trial and error or did you have some idea of what the weights and lofts needed to be? There is definitely some thought that has to be done to get it right. The 7 iron head weighs 269g so that's the weight you need to shoot for on each clubhead. I took the weight screws out and weighed them to know how much weight they added in total. The plastic screws weigh less than 1g total and are essentially there to fill the holes. I ended up making the PW about 1/4" shorter just to get the swingweight right and had to add a shaft tip weight to the 4 iron to get enough total weight even with the heavier screws. The lie angle was easy and the most I had to bend was 1.5* to get them all to 62*. Since they are forged they moved really easily. I moved a few lofts to get the gaps I wanted. 4 - 37.25" 62* 22.5* D2 5 - 37.25" 62* 26* D2 6 - 37.25" 62* 29.5* D2 7 - 37.25" 62* 33* D2 8 - 37.25" 62* 37* D2 9 - 37.25" 62* 41* D2 P - 37" 62* 45* D3 Edited March 9 by 03trdblack BallsLeon, cnosil, IndyBonzo and 2 others 1 4 Quote My bag is a revolving door! Link to comment Share on other sites More sharing options...
Rob Person Posted March 10 Share Posted March 10 Loving all these builds! One day I may have enough courage and knowledge to attempt 1 club... @TSauer those ferrules look amazing on the heads!!! sirchunksalot, TSauer, IndyBonzo and 2 others 4 1 Quote WITB-Foremost 551's - 3w, 5w, 5-SW (circa 1998), Top Flite 460cc Driver, Adam's 7w, Warrior GW and 60⁰, Odyssey AI-One DB putter. Just an old newbie golfer, trying to learn and improve 1 club at a time. Link to comment Share on other sites More sharing options...
Popular Post K91 Golf Posted March 11 Popular Post Share Posted March 11 (edited) Here's my latest project. Murdered out New Level 902 OS. 6/AW KBS TGI 90's, BB&F, Pure grips. Edited March 11 by K91 Golf BallsLeon, johngschulz, TSauer and 7 others 3 2 5 Quote Gear and stat junkie! Link to comment Share on other sites More sharing options...
Josh Parker Posted March 12 Share Posted March 12 On 3/9/2024 at 11:46 AM, TSauer said: On today’s agenda… These are going to look awesome! Great color combo! 3 hours ago, K91 Golf said: Here's my latest project. Murdered out New Level 902 OS. 6/AW KBS TGI 90's, BB&F, Pure grips. Nice! Like the combo! IndyBonzo, sirchunksalot, TSauer and 1 other 4 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
Rob Person Posted March 12 Share Posted March 12 4 hours ago, K91 Golf said: Here's my latest project. Murdered out New Level 902 OS. 6/AW KBS TGI 90's, BB&F, Pure grips. Those look sick!!! IndyBonzo and William P 2 Quote WITB-Foremost 551's - 3w, 5w, 5-SW (circa 1998), Top Flite 460cc Driver, Adam's 7w, Warrior GW and 60⁰, Odyssey AI-One DB putter. Just an old newbie golfer, trying to learn and improve 1 club at a time. Link to comment Share on other sites More sharing options...
Rob Person Posted March 12 Share Posted March 12 It was a $2 club stuffed in a kids toybox at goodwill. Grip was disintegrating in my hands. I attempted a re-grip a few months back on another club, and failed miserably. The head was not in the greatest condition either. i used a $10 kit (off Amazon iirc) that had the shaft vice clamp, double end hook knife, and 10pcs of single sided grip tape. I didnt have any grip lube, so i used some motorcycle chain lube that dries tacky. It wouldnt budge past this point, so i grabbed the compressor and trigger tip attachment, gave it a few blips in the end, and pulled down when it began to ballon. success! I quicky twisted it into alignment before the lube dried. Cleaned out the grooves, a soft bristle brush and some elbow grease to revive the head. Took about 10 minutes on the grip, and about 15 minutes on the cleaning. sirchunksalot, Shapotomous, William P and 3 others 4 2 Quote WITB-Foremost 551's - 3w, 5w, 5-SW (circa 1998), Top Flite 460cc Driver, Adam's 7w, Warrior GW and 60⁰, Odyssey AI-One DB putter. Just an old newbie golfer, trying to learn and improve 1 club at a time. Link to comment Share on other sites More sharing options...
Popular Post GolfSpy_APH Posted March 13 Author Popular Post Share Posted March 13 Just picked up some brass shims so will be rebuilding the Sub 70 659 TC irons. Going a little different and going the graphite route for these. Not sure how I feel entirely, but thought I would give it a try! Why? Because I can! BreakfastBall15, BallsLeon, Nick_D and 7 others 9 1 Quote as of Nov 6, 2023 (Past WITB) Driver: Paradym TD w/ GD ADDI 6X Driver Shootout! Wood: F7 3 wood 14.5* w/ Motore F1 Shaft Irons: T Series - T200 5 Iron T150 6-9 Iron T100 PW/GW Wedge: Toura Golf - A Spec 53,37,61 degree Putter: Mezz Max! Balls: Vice Pro Plus Drip (Blue/Orange) Link to comment Share on other sites More sharing options...
Josh Parker Posted March 13 Share Posted March 13 Here is my question for the builders in this bunch. I ordered some new heads that are .370 and doing a full custom build but all the shafts that I am looking at are .355. Can I shim them and will that hold up? I have never built a club in my life but have always wanted to and I'm going bold! sirchunksalot, JRDuck40, Rob Person and 1 other 4 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
Popular Post SickstixSpokane Posted March 13 Popular Post Share Posted March 13 I've been doing alot of ferrule work lately, that's mostly what I focus on for my golf business as it is what I enjoy the most! Here's the latest ones! Have about 4 other builds i've gotta get done over the weekend which kind of sucks because I really want to be out golfing hahaha Preeway, GolfSpy_APH, dbdors and 9 others 6 1 5 Quote Owner of Sickstix in Spokane, WA Driver = TaylorMade Stealth 9 degree with Ventus Velocore TR Red 6S 3W = TaylorMade Sim2 Max w/HZRDUS black smoke 6.0 Irons = 2021 TaylorMade P790s 4-PW w/KBS Tour V 110 shafts Wedges = 50 and 56 degree TaylorMade MG3, 60 degree Mizuno T20 satin Link to comment Share on other sites More sharing options...
TSauer Posted March 13 Share Posted March 13 2 minutes ago, Josh Parker said: Here is my question for the builders in this bunch. I ordered some new heads that are .370 and doing a full custom build but all the shafts that I am looking at are .355. Can I shim them and will that hold up? I have never built a club in my life but have always wanted to and I'm going bold! Yep, you're exactly right. You can grab something like this from Golfworks. Rob Person, JRDuck40, dbdors and 3 others 6 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
Popular Post Josh Parker Posted March 13 Popular Post Share Posted March 13 54 minutes ago, TSauer said: Yep, you're exactly right. You can grab something like this from Golfworks. Thanks! I'm waiting until the heads get in to see what color shaft to go with. Either white or black kbs. Thoughts? IndyBonzo, Triple_Putt, Jim Shaw and 9 others 6 1 5 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
sirchunksalot Posted March 13 Share Posted March 13 41 minutes ago, Josh Parker said: Thanks! I'm waiting until the heads get in to see what color shaft to go with. Either white or black kbs. Thoughts? I don't think you could go wrong with either shaft, but I'm a bit biased toward the black. Rob Person, IndyBonzo, William P and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
Josh Parker Posted March 13 Share Posted March 13 37 minutes ago, sirchunksalot said: I don't think you could go wrong with either shaft, but I'm a bit biased toward the black. I'm leaning towards the black as well with a pop of color on the grips. IndyBonzo, Rob Person, sirchunksalot and 1 other 4 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
Rob Person Posted March 14 Share Posted March 14 51 minutes ago, Josh Parker said: I'm leaning towards the black as well with a pop of color on the grips. The black look good for those I think too. Grips amd ferrules that have the same accent colors as the shaft might be a bonus as well IndyBonzo, William P and Josh Parker 3 Quote WITB-Foremost 551's - 3w, 5w, 5-SW (circa 1998), Top Flite 460cc Driver, Adam's 7w, Warrior GW and 60⁰, Odyssey AI-One DB putter. Just an old newbie golfer, trying to learn and improve 1 club at a time. Link to comment Share on other sites More sharing options...
Josh Parker Posted March 14 Share Posted March 14 1 hour ago, Josh Parker said: I'm leaning towards the black as well with a pop of color on the grips. This is the ferrule that I keep coming back to and the wife loves. Maybe do the bright pink grips from Star. GolfSpy_APH, Rob Person, jbern and 4 others 5 2 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
TSauer Posted March 14 Share Posted March 14 2 hours ago, Josh Parker said: Thanks! I'm waiting until the heads get in to see what color shaft to go with. Either white or black kbs. Thoughts? You can’t go wrong with either of those options, honestly! Pair them with matching grips and ferrules and they’ll be sick. You could even install the shafts logo down so you don’t have to worry about matching the sticker or having it throw off your color scheme. Rob Person, Josh Parker, IndyBonzo and 2 others 5 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
Josh Parker Posted March 14 Share Posted March 14 (edited) 3 minutes ago, TSauer said: You can’t go wrong with either of those options, honestly! Pair them with matching grips and ferrules and they’ll be sick. You could even install the shafts logo down so you don’t have to worry about matching the sticker or having it throw off your color scheme. So they claim the heads are black and white. I'm guessing its the metal and not white. It's supposed to be 1 of 1 on the set they will make for the year with that design. On the ferrules, will I order the hosel size of .370 or the shaft size of .355 Edited March 14 by Josh Parker Rob Person, IndyBonzo, jbern and 1 other 4 Quote Paradym TD Driver w/ Ventus Blue 6S 3W MKII ZX 5's (4-6) w/ KBS Tour V MKII ZX 7's (7-PW) w/ KBS Tour V Vokey Wedges 50* 54* 58* DF2.1 Putter Link to comment Share on other sites More sharing options...
TSauer Posted March 14 Share Posted March 14 2 minutes ago, Josh Parker said: This is the ferrule that I keep coming back to and the wife loves. Maybe do the bright pink grips from Star. I’m diggin’ it! Rob Person, IndyBonzo, Josh Parker and 1 other 3 1 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
DeBartola_B Posted March 14 Share Posted March 14 I ordered a couple of uncut shafts to do a self fitting for a driver. The manufacturer specs indicate to cut the shaft from the butt end. I have bought a hacksaw to cut it with and watched a few YouTube videos. Seems easy enough but wanted to see if anyone has done this before and has any tips. Shafts come in this weekend I am planning on cutting them down, attaching an adapter and new grip. I’ll post pictures when done. William P, jbern, Rob Person and 1 other 4 Quote Driver - Cobra LTDx LS 9* Silver Rouge 110 msi 70 X 3W -Titleist TSR2 15* TENSEI 1K Black 75 5W - Cobra LTDx 18.5* TENSEI 1K Black 75 Irons - 4-PW Cobra LTDx Nippon Tour 120 X-Stiff Wedges - 52*, 56*, 60* Cobra KING Putter - Toulon Palm Springs Ball - Taylormade TP5x Link to comment Share on other sites More sharing options...
TSauer Posted March 14 Share Posted March 14 1 minute ago, Josh Parker said: So they claim the heads are black and white. I'm guessing its the metal and not white. On the ferrules, will I order the hosel size of .370 or the shaft size of .355 I would go .370 if it were me. Rob Person, jbern, William P and 2 others 5 Quote Driver: Aerojet 9* | Hzrdus Black Gen 4 Fairway: G410 3W 13* | Alta CB 65 Hybrid: TS2 18* | Tensei AV Blue 70 S Hybrid: iCrossover 20* | Kai'li White 80 Irons: P790 5-PW | DG S300 Wedges: Vokey SM9 | 52, 56, 60 | DG S200 Putter: Link.1 | Accra x LAB --- LAB Golf Link.1 Review --- Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.