What is everyone’s wedge setup

[BNewton51]

49 minutes ago, Shank Aaron said:

This may come as a shock, but it's not the first time someone's asked me that exact question. My 9i is still at the factory 38.5*, so if you look at it (and my gapping via Arccos), it makes perfect sense in the grand scheme of things. The yardages between the five clubs is roughly a 12-15 yard gap, which is right where I need to be. 

 

PW- 140

AW- 130

50- 115

54- 100

58- 80 (I never use it on a full swing, barely a 3/4)

Makes all the more sense given the distances.  It's a unique game.  What works is simply what works and that's all that matters.  

[Slypanther]

 I have used 56* Cleveland 588, 57* 588, 60* 588, and 64* 588. Vokey has been in my bag through the year 52* SM7, 54* Raw, 58* bent to 56*, I'll likely bend it to 54*, Multiple 54*'s SM5, 60* SM4, a selection of design from over the prior years with 4*, 8*, 10* bounce: lastly my Vokey 60* bent to 64* the year before they offered the next year, that leaves my Vokey 62* to finish out my bag full of wedges that see some play each year, 20 years ago I decided that my wedge shots were flighting too high due to the new ball construction, having played balata, early urethane Professional, Tour Prestige, and removed the lead tape from the low back to now lead tape high on the back of the blade, some meticulous blade work to stay off the topline on the back, and installing X100's into the head, I have acheived my goal of lower filght, and late 2000, Pro V1 and high spin, flying a little shorter, but with wedges its not the furtest you can hit it but knowing your gapping and the shot the club was designed for, or shots that are not mishit with high grass surrounding the ball. My curious group mates ask why I put lead tape on the very back of my drivers, (MOI), lead tape on top some of my fairwoods (flight too high), not understanding the physics applied to golf equipment.

 

Currently in my cart bag on my cart, TMB PW (45*) 48* Vokey, 54* Vokey, 60* Vokey. Being able to manufacture some shots to be useful, despite the differing of wedge loft.

[Sam Saban]

I'm playing Vokey SM8's 48,54 & 60 and i love them

[txgolfer45]

Srixon ZX5 PW and AW, Cleveland Zipcore 54 10 Mid and 58 10 Mid.  

[Northern Monkey]

Callaway Mavrik PW and AW

50 and 56 Callaway MD5 Jaws

 

[BenW]

52,56,60 with midsize grips and stiff shafts. 52 and 56 are mg1 and the 60 is a mg2 Taylormade.

[sglj3]

Currently gaming a 48*, 54* and 60*. Used to primarily use the 54* but have started to use the 60* a little more ofter

[Play18]

I have played with T200 P 43°, SM9 48°, 52°, and 58° the past couple of years.  I use the 48° and 52° for full shots and 58° for greenside chips, pitches, and bunker shots.  After reviewing my Arccos data, I use the 48° and 52° only a combined 4-5 shots total during a round, so I may switch to a SM9 50° and play 13 clubs.

[MrMashie]

My PW and GW are PXG 0311 Gen 5 my 56 and 60 are Ping MB…have had them several years now and they just seem to fit my game perfectly…

[G0al3d]

I currently play P790 5 - AW (50*) and am trying out Cleveland CBX full faces in 54* and 58* both are 12 bounce

I still have a 56* regular CBX @ 12 bounce that was my jack of all trades club, but found that my open faced shots were not high percentage success shots. Thus the move to the 54 - 58 setup, I'm not entirely convinced yet that it's a better setup especially at my handicap. I don't really ever take full swings with the 58* and mostly try not to with the 54 but still do occasionally. Also not sure I need a full face club in the 54, but the larger size does inspire confidence (I'm also 50% sure full face grooves are completely snake oil ). I really want to improve my short game and have been spending time on it as I know it's going to pay dividends to reducing my handicap.

The only other thing I'm wondering about is if the "forgiving" side of the CBX wedges pay more dividends on the lower lofted wedges vs sand and lob wedges?

anyway open to some feedback on all of this, cause I do feel like I may be trying to solve too many problems at once which is something I know I tend to do

[pineneedlespro]

My wedges are 2* flat with lofts of 46*, 50*, 54*, and 58*.

 

[WaffleHouseTour]

How do folks feel about mixing low bounce and high bounce wedges in your set?  Do you play strictly one kind or mix it up?

[BobBC78]

After many years of carrying a LW most of the time, I finally came to the realization that it probably hurt more than helped and replaced it with, of all things, a chipper. In this case Ping's ChipR (I've also used the Smart Sole 4 "C") which has the 9i-ish loft of 38.5* with a 70* lie angle (actually more upright than my putter). It not only works really well for chip and run type shots but is amazingly good for pitch shots with some green to work with (e.g., 40-yard carry plus 10-yard runout).  My SW is a Glide 3.0 54*SS (12* bounce) which I had bent to 56* (14* bounce) and is very versatile for short to medium pitches, sand shots, ext. Finally, I carry the set PW and UW from my G710s. 

 

 

[OdinSnipes414]

Currently rocking some of the wedges I’ve ever used! Some custom wedges from WedgeFX! 
 

52

56

60

[GolfSpy AFG]

Guess I'm a bit of a Vokey hoe...

All SM9s in Jet Black with Steelfiber shafts.  The wedge setup for my old gamers, and now my back up set, was a set gap wedge, then the 54 S Grind and the 60 in either M or T Grind depending on conditions.  Now that I'm gaming the Edels, it's 48 F Grind, 52 F Grind, 56 M Grind.

[GolfSpy AFG]

On 9/11/2023 at 11:01 AM, WaffleHouseTour said:

How do folks feel about mixing low bounce and high bounce wedges in your set?  Do you play strictly one kind or mix it up?

I feel like mixing it up is a must, unless you're a country club guy who's going to be playing the same track over and over.  For me, you need varying degrees of bounce to be able to play in different conditions, especially firm versus soft sand.

[Thisway84]

I have been tweaking my wedge setup a bit this year... Previously, I had a stock Ping i3 PW 47*, Cleveland 52* and 58*. I loved using the 52* approach, but found I had a huge gap with the full 52* and 58*. In all reality, I am not one to hit a full out 58* anyways. So I added a 56* which helped some of this gapping, however the 56* and 58* are pretty darn close. I bought new Irons this summer. The i230 PW is 45*, when it is time to upgrade my wedges I think I will go with a 50*, 54*, and 58*. The Ping Gap Testing function recommended I go 52*, 56*, and 60* but I like the versatility of the 58* a bit more than the 60*.

[Donn lost in San Diego]

On 9/6/2023 at 7:23 AM, RichardsonIrish said:

Honma 45 and 50, Mizuno es21 54 and 58.  All used on full shots other than the 58.  54 and 58 from bunkers.

Follow up review on the Mizu ES21?  i just picked up a NOS for $80, the 58 x 08. To challenge my Mizu T7 60 x 06 bent to 58.

[ClarkWGriswoldIII]

Mizuno JPX921 Hot Metal pitching wedge- 44 degrees

Mizuno JPX921 Hot Metal gap wedge- 49 degrees

Cleveland CBX Zipcore- 52 degrees

Cleveland CBX Zipcore- 56 degrees

Cleveland CBX Zipcore- 60 degrees

 

[Josh Parker]

My setup has changed. I'm currently using vokey sm9:

50F

54F

58T

 

[GolfSpy_KFT]

I’m playing Aerojet set PW (41.5°) and GW (47.5°), then Snakebite Black 52° and 56°

[gin]

Srixon ZX7 Pw (46°)

Cleveland RTX6 50°, 54°, 58°

 

[Will_Mac]

Mizuno S23 with KBS 115, 46° (S-grind), 50° (S), 54° (S), 58° ( C ).

[RetiredBoomer]

T350___43, 48, 53º (all come with 4-12 set)
Smart Sole Full Face___58, 64 and chipper.
Good thing I have a fifteen club bag.

Edited August 1 by RetiredBoomer

[Vollundganz.Golf]

Currently gaming Vokeys and i sure know why 

Gapping 50-54-58 

Grinds 50-10M / 54-10S / 58-K

I sure love each grind for it's own reasons, for example the 50-10M is just amazing around the greens for bump and runs no matter the lie situation. 
 

 

[arandal4545]

I actually need a little help on this. My current setup is SM9 54 & 58, and 50 ZX7. I have a massive gap between my 54 and 50 wedges. 

I just do not seem to hit my SM9's very far. 

Any ideas to switch it up? 

[JAYER38]

21 minutes ago, arandal4545 said:

I actually need a little help on this. My current setup is SM9 54 & 58, and 50 ZX7. I have a massive gap between my 54 and 50 wedges. 

I just do not seem to hit my SM9's very far. 

Any ideas to switch it up? 

Bend the 54* SM9 stronger OR go weaker on the 50* ZX7... until you reach desired gapping...

For this read I play a 44* set PW, 48*/52*/58* PING Glide Forged Pro wedges

Edited August 1 by JAYER38

[FloodedGolf]

Sim2 Max AW - 49

Cleveland Zipcore - 54

Callaway Jaws Full Face- 58

I barely use my 58 and found that the 54 gave me a better distance on full shots but usually just prefer choking down on my AW . I use the 54 all around the green. I think its mostly just understanding your distances and know how your chips are gonna roll out with a certain loft. Really all personal preference and don't think one setup is better than another.

 

[Vollundganz.Golf]

3 hours ago, arandal4545 said:

I actually need a little help on this. My current setup is SM9 54 & 58, and 50 ZX7. I have a massive gap between my 54 and 50 wedges. 

I just do not seem to hit my SM9's very far. 

Any ideas to switch it up? 

Hey, this might not help but for me personally i rarely use my 54 & 60 for anything farther than 100yds in. I also use my 50° for a variety of shots all the way to the green. 
other than that i could recommend playing around with more shaft lean and open face.

 

cheers 

[GolfCy]

On 8/4/2023 at 4:17 PM, Shrek74 said:

I have a Sub70 286 50* Gap wedge that's my last full-swing club. I also use it around the green for bump and run shots when that's needed.

I have the Sub70 JB Full Groove 54* & 60* wedges for chipping and bunker shots.

Going forward my next set will be more 54 & 58 as I don't really see the need for the 60 in my game. Opening a 58 is enough for me.

I love my Sub70 JB 54 & 58. I wish I would have gone with the full grooves when I got my wedges.