Jump to content
JBones

OFFICIAL FORUM MEMBER REVIEW - MIZUNO JPX 900 IRONS

Recommended Posts

It took about a month to see the big improvements, I just feel so confident with these clubs. I used to be on single figures and had lost my way, but i'm back to my old form.

  • Like 2

Share this post


Link to post
Share on other sites

It took about a month to see the big improvements, I just feel so confident with these clubs. I used to be on single figures and had lost my way, but i'm back to my old form.

That's great to hear. Congrats on the improvement, and lower scores are fun aren't they.

 

I'll have obviously more detail in the final stages coming very soon, but I feel i owe it to the forum to at least add a comment or two about scoring. 

 

I haven't seen the dramatic drop in handicap that you have. .  But I can say at the beginning of the testing, I was a 19.7, as of Nov 1st I am 17.9.   The only other change in my bag during that time was driver, but there was only a minor increase in yardage I picked up in the performance of the current driver 917D3 that I started the year with vs the Srixon 565 that I played most of the summer,. 

 

The JPX900 Hot Metal irons have been very solid.  As many know, I just got a set of Titliest 718 combo AP1/AP2 that I have only had a couple rounds in with, but have compared on the range to the JPX,   The 4-7 end of the bag is where the are similar, and so far the performance has been very similar in both.   Will have some actual data of the two to go into the final stage. 

  • Like 2

Share this post


Link to post
Share on other sites

Got done with work early in Tulsa today, and American Airlines wanted to charge me $400 to fly a day early, so I went to the local Golf Galaxy and hit a bunch of irons on the monitor. Tried the 900 Tours and couldn't get a good feel for them. Lots of “left”. Club FELT nice though!

I went to a local course that had some fitting carts and a range, so I built a few clubs and went to hit a bucket. Tried the Tours and Forged this time. Again, not a good fit.

I will say this, though: as usual, the fitting carts only had clubs that were +1/2”, so everything was a minimum of 1/2” short for me.

The Tours are SO pretty!

 

 

Sent from my iPhone using MyGolfSpy

Share this post


Link to post
Share on other sites

Got done with work early in Tulsa today, and American Airlines wanted to charge me $400 to fly a day early, so I went to the local Golf Galaxy and hit a bunch of irons on the monitor. Tried the 900 Tours and couldn't get a good feel for them. Lots of “left”. Club FELT nice though!

I went to a local course that had some fitting carts and a range, so I built a few clubs and went to hit a bucket. Tried the Tours and Forged this time. Again, not a good fit.

I will say this, though: as usual, the fitting carts only had clubs that were +1/2”, so everything was a minimum of 1/2” short for me.

The Tours are SO pretty!

 

 

Sent from my iPhone using MyGolfSpy

Plus I'm pretty sure in this, but I believe Mizuno I'd 1/4 shorter than most OEM standard. So if you were hitting a 1/2 over Mizuno, you likely were really hitting a 1/4 over the standard from most OEM. Which in reality could be 3/4 to 1 1/4 inxh from what you are used to.

 

 

Sent from my iPhone using MyGolfSpy

Share this post


Link to post
Share on other sites

Plus I'm pretty sure in this, but I believe Mizuno I'd 1/4 shorter than most OEM standard. So if you were hitting a 1/2 over Mizuno, you likely were really hitting a 1/4 over the standard from most OEM. Which in reality could be 3/4 to 1 1/4 inxh from what you are used to.

 

 

Sent from my iPhone using MyGolfSpy

Yep, no doubt. Let alone lie angles... Being 6'5” it's IMPOSSIBLE to go to a place with a fitting cart and TRULY get fitted, or even have a selection to demo that “fits”. There was one OEM that did have an option with a +1” shaft and I hit lasers with it! That LITTLE bit of length makes a HUGE difference!

 

 

Sent from my iPhone using MyGolfSpy

  • Like 1

Share this post


Link to post
Share on other sites

Yep, no doubt. Let alone lie angles... Being 6'5” it's IMPOSSIBLE to go to a place with a fitting cart and TRULY get fitted, or even have a selection to demo that “fits”. There was one OEM that did have an option with a +1” shaft and I hit lasers with it! That LITTLE bit of length makes a HUGE difference!

 

 

Sent from my iPhone using MyGolfSpy

Oh yeah, I didn't even mention the lie angles, that was one reason i was about a month behind the others in getting started, I normally play 2 to 3 degrees up and the mizuno lies are flatter than normal specs.  

  • Like 1

Share this post


Link to post
Share on other sites

My mizzys are 3° up and that has made a difference.

  • Like 1

Share this post


Link to post
Share on other sites

Oh yeah, I didn't even mention the lie angles, that was one reason i was about a month behind the others in getting started, I normally play 2 to 3 degrees up and the mizuno lies are flatter than normal specs.

The guy at the store mentioned this. He didn't know exactly how many degrees flatter, but it was obvious looking down at the “upright” fitting head that it was still “toe-down”.

 

 

Sent from my iPhone using MyGolfSpy

Share this post


Link to post
Share on other sites

The guy at the store mentioned this. He didn't know exactly how many degrees flatter, but it was obvious looking down at the “upright” fitting head that it was still “toe-down”.

 

 

Sent from my iPhone using MyGolfSpy

I believe it is 2 degrees. So for me to get them back on to standsrd they would have had to bend them 2 and to ny minimal spec of 2 degrees up they would have had to go 4.

 

Since they are cast they said that wasn't possible. I asked them to get the 6 iron as close as they could to 63 or 64 degrees. As my Srixon 6 iron was 63.5 up from the 61.5 standard.

 

They came back unbroken and no note thaf they did otherwise. So in guessing based on my flight and looks next to the Srixon. They are pretty close.

 

 

Sent from my iPhone using MyGolfSpy

  • Like 1

Share this post


Link to post
Share on other sites

Plus I'm pretty sure in this, but I believe Mizuno I'd 1/4 shorter than most OEM standard. So if you were hitting a 1/2 over Mizuno, you likely were really hitting a 1/4 over the standard from most OEM. Which in reality could be 3/4 to 1 1/4 inxh from what you are used to.

 

 

Sent from my iPhone using MyGolfSpy

 

This is interesting, I didn't know that.

 

During my fitting, the club fitter handed me +1/2" to try. It was odd to me because I don't consider myself taller than average at just 5'10". In the end, after hitting on the lie board I was spec'd to play 1* upright, and I find that I start my ball straighter than I used to.

  • Like 2

Share this post


Link to post
Share on other sites

Just something fun from the range session today. Played with Shot Tracer on my girlfriend's new iPhone X

 

  • Like 4

Share this post


Link to post
Share on other sites

Just something fun from the range session today. Played with Shot Tracer on my girlfriend's new iPhone X

 

https://youtu.be/hozcUzTVM6A

That's cool, does it just track the ball or give ball info also?

 

Sent from my SAMSUNG-SM-G930A using Tapatalk

Share this post


Link to post
Share on other sites

Just something fun from the range session today. Played with Shot Tracer on my girlfriend's new iPhone X

 

https://youtu.be/hozcUzTVM6A

So Cool!! And man did that shot sound and look crisp!!

 

Love the app. Do you know if it's available for the 7+ as well.

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

I'm imagining that scene from Mighty Ducks where that Emilio Estevez makes the kid hold the hockey stick and then turn it, and then drops it because he can't rotate his wrist and everyone does the FeelsBadMan face. Get well soon brother!

Time to get this Stage 2 testing wrapped up!

 

https://youtu.be/R-d2k29KEeE

  • Like 2

Share this post


Link to post
Share on other sites

That's cool, does it just track the ball or give ball info also?

 

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

It doesn't do ball data. It has a feature that tells you how far you hit it, and it'll put a tracker with numbers at the bottom that climbs as the ball travels, but to get it to work you need to walk where your ball landed while you have the "distance tracker" effect open.

 

So Cool!! And man did that shot sound and look crisp!!

 

Love the app. Do you know if it's available for the 7+ as well.

 

 

Sent from my iPhone using Tapatalk

 

It should work for all iOS devices. It's really fun to play with, but it's $7 so unless you video yourself often it's probably pretty useless. I only bought it for the purpose of the review and since MGS was kind enough to get me a set of new irons, I figure another $7 out of my pocket to help get my results put on paper, was something I would gladly do.

 

Time to get this Stage 2 testing wrapped up!

 

 

HAHAHAHAHA! Perfect movie quote. We need someone on the review named Charlie to give up his spot  :lol: I'm dying.

  • Like 4

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Daily Deals

  • Sponsors

  • Our Sponsors

     
     
     

  • Member Statistics

    • Total Members
      82,025
    • Most Online
      2,247

    Newest Member
    Rileyhwl
    Joined
  • Similar Content

    • By Kambeau
      Before I dive into my review, here is a background as to what made me switch putters :

      In early August I started with an awesome putting coach. Before I started working with him I was missing everything and recently came off a tournament with two 4 putts in the round. As I’m beginning to enjoy and play tournament golf making putts was about to become really important to me. I used a Taylormade Spider Tour Red for about 9 months, but the look killed me. found it so irritatingly huge and wanted something a little slimmer. I then decided to switch to an OdysseyWorks #7 for 6 months. Was overall positive about it, but as my stroke got sloppy my confidence decreased and I pulled putts endlessly. I went into my first putting session with my Odyssey. By the end of it my stroke and set up were pretty pure. But I was still pulling putts. I aimed down my line and my coach looked from behind me, laughed and said “where are you aimed?” And I said “dead straight!” And he goes “nope your way open.” I set up again and wham. Same thing. We then found out that I am left eye right hand dominant or “Cross Dominant.” The double bend shaft style was causing me to aim left, when my eyes thought I was straight. Then he broke the news to me ... “yeah, uh, you need a new putter.” He then slapped a center shafted putter in my hands and I was dead on. The search for a new flatstick began. 
       
      My review of the Bettinardi Studio Stock #28 :


      I came away from my fitting with a Bettinardi Studio Stock 28 CS Slotback. My heart had wanted a Scotty Cameron for so long, I bought the marketing hype, and wanted to have one as a golf status symbol. But the results were over and over again showing that the Betti was a beast. The milling is masterful, the feel off the face is very very soft which suits my style. The look over the ball is simple and elegant. Plus the center shaft style has helped me greatly with my alignment. It’s similar to an ER2 in that it’s a blade style with some extra meat on the back which I like. It also gives the look of a blade with the forgiveness of a mallet. Overall very happy with this flat stick. Putting is now night and day compared to what it was. I will say, if I have to reach a little bit and find one flaw with it I wasn’t a fan at all of the standard grip, I use a SS Flatso 1.0 so the stock grip wasn’t my taste. But that’s my only gripe. I’ve now been converted to a huge Bettinardi Fan, and don’t see myself changing the flat stick for a long, long time. 




    • By jaymikem
      I have a set of JPX 919 hot metal pro irons, 4 - GW, kbs c taper light stiff shafts, that have been played for about 15 rounds and hit for 5 range sessions. Still pretty much look new (will post pictures later), but looking to potentially trade for a set of black cobra forged tec irons in similar shape, or a set of 919 forged. The clubs are fine, but the added distance I get compared to my old clubs is a little more than I need. 
      All standards for length, lie, etc. If in the metro Detroit area, would be willing to meet up to make the trade to save on shipping. 
      GONE AND CAN BE LOCKED DOWN!
    • By Maltenator
      Introduction
      My name is Matt I'm 36 that lives here in Mechanicsville, VA (Richmond Area). I have 2 awesome little daughters who are 8 and 7, and an amazing gorgeous wife who is way too hot for me and out of my league. I'm pretty lucky. I work in IT for the IRS, love all Chicago sports teams Bears, Cubs, Blackhawks, and Bulls. I am obsessed with Disney as is my family, we go once if not twice a year every year. I have been an avid golfer since I was 13. Before I met the best thing ever to come into my life, my wife, golf really saved me when I got out of the Air Force in 2006 and was dealing with PTSD. I got my handicap down to a 5, because I fully immersed myself into it to get away from all my demons, and horrible thoughts in my head. For these reasons, I will never turn my back on the sport as it was there when I needed something that can't be explained the most at that point in my life. Unfortunately due to 4 knee surgeries a meniscus repair, a meniscus removal after tearing it for the 2nd time 4 years to the day after I tore it the first time, a meniscus implant, and a clean out around my ACL, my game has slipped severely over the last 9 years since my original injury in 2010, and only being able to play as much as my knee would let me. My knee is finally back to 100% and can dive back into the sport I love. I am currently a 15 handicap and working my way back down slowly. I never lost my swing, but I need to get back to where I was mentally. All of my extra strokes come from mental errors and minor misses, and getting down on myself because I know I can be as good as I once was if not better. I have gamed Mizuno JPX 800 Pro forged irons the last 6 years since 2013, and have always felt there is no better feeling iron to me than Mizuno's, then I went out on a whim, and decided to overhaul my whole bag from bag all the way down to putter this year. I got fitted for PXG 0211's and from the moment I hit the first ball, I was addicted to them. So without further ado here is the review below.
      These are from our Disney trip we just got back home from on Aug 18th. Also, sorry for such large photos (but details right?).

      About the club
      These are PXG's first cast club. I feel they are PXG's answer to reach the masses, and make an affordable club for all golfers.
      According to their website they state "We packed our 0211s with three key GEN2 technologies. First and most important is a hollow body design filled with our proprietary COR2 polymer, the world's thinnest club face (made possible by the COR2) and a 360-degree undercut perimeter channel around the club face that expands the functional size of the face. These three technologies combined result in a club that goes farther, launches higher, feels softer, sounds great, is more forgiving and has a sweet spot the size of Texas."
      Looks 10 out of 10
      The PXG 0211 irons are a progressive iron set, meaning the amount of offset gradually decreases the shorter the clubs become. For example, the 4-iron has slightly more offset than the 5, and so on through the wedges.
      Progressive sets offer more forgiveness in the long irons, where it's needed most for all golfers. There isn't much offset needed in the 8-iron up due to golfers being more proficient with them.
      In the long irons, the 0211 have a very good offset and a little noticeable sole sticking out past the top line.  When you get to the scoring irons, the 0211 there is less offset and less sole sticking out.
      I would put these into the middle of a players and game improvement iron. They have somewhat of a slim top line, a decently wide sole, and the blades are longer than most players irons, and Bob Parsons wasn't lying when he said they have a sweet spot the size of Texas. 
      They are absolutely gorgeous at address. 

      Sorry these are the only photos I have at address and it's the PW. But aren't the center strike ball marks BEAUTIFUL?

       
      Sound & Feel 10 out of 10
      These feel absolutely smoother than any golf club I have ever hit. Forged or cast, this is due to hollow body design with their proprietary COR2 polymer. When hit they leave no doubt that the ball is going for a long ride. They are very very soft with a spring like sensation off center faced strikes. It has a very nice strong and clean mid pitch at impact, that gives immediate feedback for mishits, which are hard to do with their sweet spot.
       
      Performance 10 out of 10
      Having been fitted by a PXG fitter I had high expectations for what theses should produce, these expectations were met and surpassed in all categories. 
      Borrowed this from another site so I'm quoting "The 0211 features the same face material (HT1770 maraging steel) as the 0311 GEN2, which works in conjunction with PXG’s more responsive second generation COR2 polymer material – the goo filling that allows for the thinnest iron face on the market – to preserve ball speed across the whole of the face.
      Like the 0311 GEN2, it offers an internal face perimeter cut-out. It’s a design which leverages an undercut cavity and moves the weld lines between the two pieces to the outer perimeter of the club (as opposed to on the face itself). It’s a forgiveness-boosting feature that makes for an effectively larger face without increasing the size of the clubhead."
      The forgiveness and the wider soles is where the clubs really shine and help make thin misses playable and not penalize the player as bad as some other irons would.
      I have found the spin in the short to mid irons to be sufficient enough to hold greens, and not send the ball rolling off once they land, and the wedges paired with a good quality ball makes it easy to zip the ball back something I haven't been able to do in a long time.
      Where the progressive design helps me most is in the 5 iron, with the extra offset, I can launch the ball easier than my old 5 iron and not worry about it going anywhere but straight. 
      I have gained 10-12 yards of carry over my old Mizuno's. This could be impart to being slightly stronger lofted clubs as well, but I feel it has more to do with newer technology and a faster face. PXG also claims these have "the thinnest face in golf" and I haven't seen any other company argue this.

       
      Upgrades 5 out of 10
      I give the upgrades a 5 because they don't offer many shaft options comparatively to competitors (they have the same number of brands but the shaft models are more limited than other brands), and the upgrade price on shafts is on par with other manufacturers. I do feel the shaft offerings fit a large variety of golfers, and my fitter had me dialed into my shaft within about 20 minutes, then went through every club to ensure that it would suit me through every iron.
      The biggest drop in score here is there are no additional grips that can be upgraded to. The only option is the Lamkin Z5 which I gave a try, and hated after 1 round due to not being tacky and soft enough but this is purely subjective on how you like your grips. I quickly replaced them with my preferred Winn Dri-Tacs. 
      Quite shocking since PXG is known to be all custom built, the 0211s have what amounts to a true stock shaft offering for the first time. True Temper’s new Elevate is the steel offering. The standard Elevate is a 95g offering (available in R and S flex), and the Elevate Tour 115g (available in S and X flexes). I was fitted with the Elevate Tour through all my irons.
      Both Elevate shafts feature VSS (Vibration Suppression System) technology. A fresh take on the Sensicore principle, VSS reduces unwanted vibrations by 71% in the standard Elevate, while VSS PRO reduces unwanted vibrations by 56% in the Elevate Tour.
      The graphite offering is the just-released MMT from Mitsubishi.
      Fitters and buyers will still have access to PXG’s full shaft matrix, but there is a per club upcharge of $25 (both steel and graphite) to move out of the stock offerings.

      Stock Grips

       
      Miscellaneous 10 out of 10
      First and foremost the customer service is OUTSTANDING, they keep you informed through the whole process all you have to do is call and ask. You can call 844-PLAY-PXG and they will set you up with a fitter at no expense to you. They sent my fitter from 2 hours away and spent 3 hours with me. There was absolutely no pressure from his end either for me to make a purchase. 
      They have a 30 day playability guarantee and a 1 year manufacturer's warranty on defects.
      Also, the boxes these come in are the nicest, sturdiest, best looking boxes I have ever seen golf clubs come in.
      Sorry the photo isn't the best, I was excited to get the boxes open and check the clubs out so I just snapped a quick photo.

       
      Price 7/10 out of 10
      My reasoning for the 7/10 out of 10 is if you're an Active duty member, Veteran, or First Responder and can be verified through ID.ME on their website the price is 10/10, you can snag these for the same price if not less than any other major brand out there. I paid $105 an iron for mine, but they have raised the price to $125 an iron for steel or graphite. Also, if you buy six of them you receive a free Gen 1 driver of your choice, and are offered a Gen 1 putter of your choice for $95, which I took advantage of both offerings opting for the 0811XF and Mustang putter. 
      If you do not fall into these categories they will run you $195 an iron for steel offering, and $210 for graphite and this is the reasoning for a 7/10.
      Shipping costs $30 for a single iron, $60 for irons and woods , and $100 for a whole set. Also, it is a direct signature required VIA FedEx this guarantees they hit your hands and not stolen off your porch. If you're lucky enough to live in the area, you can also pick them up from their headquarters for free.
      Specs 

       
      Conclusion and Overall 10 out of 10
      I give the clubs a 10 out of 10 overall because they are absolutely one of the best clubs I have ever gamed, demoed, swung. Now I know this is very subjective as well, and what works for me won't work for the masses. I would not think twice if asked if I recommend these clubs, because I would a million times over. PXG’s goal with the 0211 irons was to bring the performance and feel of their 0311 irons to golfers at a lower price.  They blew this goal out of the water.
      The progressive set is designed extremely well to fit the vast majority of golfers, although it doesn't offer the flexibility of the different 0311 models. If price has been scaring you away from PXG irons, call and get fitted because these are budget friendly comparative to their other models, and even more so for military, veterans and first responders.
       
      Please let me know what you think of my first review, and it's okay to be brutally critical I can handle it I'm a big boy.
      Thanks for reading,
      Matt
       
       
       
    • By Mcdonaldpe
      Hi folks,
      I’ve been told several times by pros that OEMs offer a refinishing process for their clubs. I’m looking at getting my MP4s refinished at the end of the season but can’t seem to find a contact for Mizuno in Ireland that knows about this (or is willing to tell me over a sale), does anyone have any advice or alternative options to this. I don’t want to change clubs as I really enjoy playing these but they are starting to wear.
      Thanks in advance
      Richard
    • By cynogriffin
      This is a thread for those who are interested in reading or sharing golf ball comparisons! 
      Personally, I am in the stage of personal ball testing to try to find my next gamer for the next season or two. As such, I have been and am in the process of testing a variety of premium golf balls to see which fits my game and personal preferences. My posts in this site will be coming from off my new website (linked here for those who might want to check it out: https://griffinc6.wixsite.com/golfreviews) and will be in the form of a head to head matchup between two of the balls I am considering. During my tests, I will be taking two different models to the course and playing 9 holes with each in the same round, same day, and same conditions. In my posts, there won't be much in the way of technical data other than distance (measured via Shot Scope) but will rather be how I experienced the balls in terms of distance, spin, flight characteristics, performance and fell around the green, putting, quality, durability, and consistency. Once again, for my posts here, these are by no means a scientific test, but rather what I prefer, what I see, and how the balls perform for me. Therefore whatever performs for me might not translate to your game or your experiences with these products. I also invite everyone to post your own comparisons, head-to-heads, and reviews here as well!
      Now that that is out of the way, let the discussion begin!
  • Recent Topics

  • Latest from the Blog

  • Happy Birthday Today!

×
×
  • Create New...