Jump to content
Testers Wanted: Newton Driver Shafts ×

What Have You Bought Lately? (CHA - Club Ho's Anonymous)


hckymeyer

Recommended Posts

2 hours ago, cnosil said:

I had the loft on my TS3 turned up but yes,  it appeared to be a little higher on the simulator but honestly didn't really pay that much attention.  I hit the TS3 low so even if it is the same would be fine; higher would be better.    Miss hit a few and it did seen very forgiving.   Will have to see how it does tomorrow....hopefully I find a place to hit it 🙂

 

When considering angle of attack, the 1.5 degree difference is quite small and according to my garmin data over a year, my Stealth 16.5* averaged 233 and the 2 3 woods fixed at 15* was 244 for my Yamaha RMX and 239 for My Exotics EXS Pro 15*. However, the consistency or standard deviation of the average was lower or more consistent with the 16.5 loft. Overall, if you struggle with 3 woods off the deck like the majority of the world, a 16.5* or adjustable 3 wood with added loft will serve the majority of people much better. Consistency over 5-10 yards. I found the best combo for me is higher loft with a low launch stable tip shaft or a 15* with a higher launch shaft.

Edited by KOG

Driver : Yamaha RMX 220 9.5 With Diamana ZF50 Stiff

3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff

7 Wood: Yamaha RMX VD 21* with Diamana Whiteboard 60 Stiff

Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff

Utility Iron/ 5 iron: Srixon ZX 23* w MMT 85 stiff

6-pw Matlby TS3 w MMT 85 stiff

50*, 54* Mack Daddy 4 black w Modus 120 stiff

58*  Mack Daddy 3 PM Grind w Modus 120 stiff

Putter: Ben Hogan BHB03 W UST Freq Filtered shaft

Revelation CEO Cart Bag

Link to comment
Share on other sites

12 minutes ago, KOG said:

When considering angle of attack, the 1.5 degree difference is quite small and according to my garmin data over a year, my Stealth 16.5* averaged 233 and the 2 3 woods fixed at 15* was 244 for my Yamaha RMX and 239 for My Exotics EXS Pro 15*. However, the consistency or standard deviation of the average was lower or more consistent with the 16.5 loft. Overall, if you struggle with 3 woods off the deck like the majority of the world, a 16.5* or adjustable 3 wood with added loft will serve the majority of people much better. Consistency over 5-10 yards. I found the best combo for me is higher loft with a low launch stable tip shaft or a 15* with a higher launch shaft.

There is more to launch angle than just loft.  I don't pay attention to the low/mid/high markings on a shaft since it is just an OEM made up label.  

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :callaway-logo-1: Paradym AI Smoke Max HL  16.5* w/MCA TENSEI AV Series Blue
Hybrids:  :titelist-small: 915H 21* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  24*  w/KBS Tour Graphite Hybrid Prototype        
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :titleist-small: 54/12D, 60/8M w/Accra iWedge 90 Graphite
Putter:   more-golf-logo.png Render w/VA Composites Baddazz 

Backup Putters:  Sacks Parente MC 3 Stripe,  :odyssey-small: Milled Collection RSX 2

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

42 minutes ago, cnosil said:

There is more to launch angle than just loft.  I don't pay attention to the low/mid/high markings on a shaft since it is just an OEM made up label.  

Can you elaborate? I always thought the bend point was the most important aspect in assessing the avg launch of a shaft

Driver : Yamaha RMX 220 9.5 With Diamana ZF50 Stiff

3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff

7 Wood: Yamaha RMX VD 21* with Diamana Whiteboard 60 Stiff

Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff

Utility Iron/ 5 iron: Srixon ZX 23* w MMT 85 stiff

6-pw Matlby TS3 w MMT 85 stiff

50*, 54* Mack Daddy 4 black w Modus 120 stiff

58*  Mack Daddy 3 PM Grind w Modus 120 stiff

Putter: Ben Hogan BHB03 W UST Freq Filtered shaft

Revelation CEO Cart Bag

Link to comment
Share on other sites

2 hours ago, Indy_Oz said:

None within 100 miles, no! Mail order it's available though. I wanted to give one a try in store. Didn't realize they were doing the 2x bonus too though. I'll have to pay more attention and see if an in-store fitter has a demo one I could try.

The Callaway trade-in bonus should be available at any "brick & mortar" store which sells Callaway clubs, as they would have a Callaway account.

Doesn't have to be a specific Dick's Sporting Goods or Golf Galaxy.

Promotion is by Callaway corporate, and all of the stores which have a Callaway account must abide by the promotion.

@cksurfdude and @cnosil great information on your acquisitions, once I get done with all I need to do for today, I will post up pictures and information on the Callaway's I recently acquired.

Driver & Fairway: :titleist-small: Titleist TSR3 10 degree - :Fuji: Ventus TR Blue & :titleist-small: TSR3 15 - :projectx: Hzrdus Black Gen 4 

Hybrid: :titleist-small: TSR2 21 degree - :projectx: Hzrdus Black Gen 4

Irons: :titleist-small: Titleist T200 3G (4) & T150 - (5-G) - :projectx: Project X LZ 

Wedges: :vokey-small: Vokey SM8 54, and 58

Putter: :cameron-small: Cameron Phantom X 7.5

Ball: :titleist-small: Pro V1 & :maxfli: Maxfli Tour

Link to Motocaddy M7 w/Remote Trolley & Bag Review

 

Link to comment
Share on other sites

5 hours ago, KOG said:

My C130 had a broken zipper and some annoying wear so I was in the market for a new cart bag. 

I was looking at Ghost and Vessel and found this Revelation CEO bag and found it for $200 and it seems very high quality and very sturdy. They (maple hill golf) basically just went to the Vessel/Ghost manufacturer in China and made their own house brand. Yet to bring it out but Im impressed so far. Less chunky than the c130 as well

 1111.png.7a63158f64ef677cd0ded654735b0f6f.png

bag2.png.7f35f20fe4b723d30780ee1eefc98421.png

 

IMG_3238.jpg.43efcc8eda881d8c3f191470212b249b.jpg

IMG_3237.jpg.40bf7753929d62e953e4b75ec54d45c8.jpg

Here's a vid about the bag.

www.revelationgolfusa.com/revelation-ceo-cart-bag

That's a nice looking bag!

WITB-

Driver  -Titleist 910D, 3w- Titleist 910F, 5hy/7hy- Titleist 910H, 6-PW - Stix , 52⁰, 56⁰, 60⁰ - Stix , Putter- AI-ONE DB / Lombardi Tour 34 custom

Just an old newbie golfer, trying to learn and improve 1 club at a time.

 

 

Link to comment
Share on other sites

4 hours ago, Michael.Sandoval33 said:

I bought this 6hy for the Fiancé to try her hand at golf (I will not be teaching her because in no way am I fit to teach a soul how to play golf 😂)

IMG20240621204301.jpg.bf66e436ebfe76533c2d7cb5315e4ec5.jpg

Brand new in the wrapper for $12 🤷🏽‍♂️ couldn't hurt

 

Edit: I did give her basic swing knowledge but that's all I could offer before she starts seeking lessons.

That's a great find!!!

WITB-

Driver  -Titleist 910D, 3w- Titleist 910F, 5hy/7hy- Titleist 910H, 6-PW - Stix , 52⁰, 56⁰, 60⁰ - Stix , Putter- AI-ONE DB / Lombardi Tour 34 custom

Just an old newbie golfer, trying to learn and improve 1 club at a time.

 

 

Link to comment
Share on other sites

37 minutes ago, Rob Person said:

That's a great find!!!

Thanks Rob, it's actually part of the master plan to buy more new clubs for myself in the future 😂

WITB

Driver:  :taylormade-small: Qi10 Max 10.5°

Hybrid: 🐏 FX Max 25°, :titleist-small: Tsi2 21°

4i-9i: 🐏 FX Max 10

Wedges: :vokey-small: SM10 - 50° 12f, 54° 14f, 58° 14k

Putter:  :mizuno-small: M.Craft Type VI

Ball: :vice: Pro Air

Bag: Ghost Golf Maverick 14-Way 

Glove: Nexgen Nano-X Pro Tour+

 

Link to comment
Share on other sites

1 hour ago, cnosil said:

There are no standards in golf. A high launch shaft is high launch compared to what?  The OEM decides on their own terms and a high launch in one shaft may be low in another.  Also the player responds to the feel of the shaft and may deloft a high shaft more than a low launch shaft.     It’s like flex and torque, we don’t know how the manufacturer measures.   The golf shaft ei profile  site, don’t remember the URL and don’t feel like searching, is probably the best source of info since they measure the shafts the same way.  

Here is a link to the site @cnosil mentioned.

Well worth the $12.00 cost for membership if you are interested in learning about shafts and their different EI profiles.

https://www.golfshaftreviews.info/

Driver & Fairway: :titleist-small: Titleist TSR3 10 degree - :Fuji: Ventus TR Blue & :titleist-small: TSR3 15 - :projectx: Hzrdus Black Gen 4 

Hybrid: :titleist-small: TSR2 21 degree - :projectx: Hzrdus Black Gen 4

Irons: :titleist-small: Titleist T200 3G (4) & T150 - (5-G) - :projectx: Project X LZ 

Wedges: :vokey-small: Vokey SM8 54, and 58

Putter: :cameron-small: Cameron Phantom X 7.5

Ball: :titleist-small: Pro V1 & :maxfli: Maxfli Tour

Link to Motocaddy M7 w/Remote Trolley & Bag Review

 

Link to comment
Share on other sites

3 hours ago, sirchunksalot said:

We drove down to Chattanooga to eat at our favorite Chinese buffet tonight and I stopped in at DSG and bought the 4 dozen box of MaxFli Tour golf balls. 

1000009057.jpg.d0143d88e1949395681b5b55d31f5d2a.jpg

I also tried on some Skechers golf shoes to see how they fit since I see them on sale from time to time. They were so comfortable and I thought about picking them up, but am looking for a different color than white. I'll have to check places like Golfetail or Golf Discount to see what they have. 

I wish the would bring back the Blue Max ball, that was a great ball from back in the day

Jeff "PUTSO" Pillar

buckpillar@gmail.com

Link to comment
Share on other sites

8 hours ago, cnosil said:

There are no standards in golf. A high launch shaft is high launch compared to what?  The OEM decides on their own terms and a high launch in one shaft may be low in another.  Also the player responds to the feel of the shaft and may deloft a high shaft more than a low launch shaft.     It’s like flex and torque, we don’t know how the manufacturer measures.   The golf shaft ei profile  site, don’t remember the URL and don’t feel like searching, is probably the best source of info since they measure the shafts the same way.  

Yeah, thats the source I use, though its become members only for pay recently. It measures bend point in inches from the tip with lower suggesting a higher launch and vice versa. That measurement, cfm of overall shaft (esp tip, mid and butt) and weight are the most significant stats when assessing probable staff performance *when testing with a robot. But that shaft review testing does point out the most significant in assessing launch is bend point and tip stiffness.

I understand humans are not robots, but knowing the bend point location and the tip, mid, and butt stiffness can certainly help you find a shaft that will launch higher or lower, all things considered equal.

I like a mid stiffness butt, softer middle and stiff tip in general, and weight range. So if you can read the shaft profiles, you can rule out shafts that likely wont fit your preference and ones that likely will. Especially when you standardize testing among them all.

If you were fitted for a shaft but dont want to spend $600 for some Oban shafts you can look up that shaft profile, then seek a similar profile. Same if you tried a shaft at the store or one you previously owned that you really liked. In general I think we agree, but with the caveat that the vast majority of shafts labeled high launch, typically measure similar in the profiles.

Driver : Yamaha RMX 220 9.5 With Diamana ZF50 Stiff

3 Wood : Exotics C721 16.5* With Tensei Blue 60 stiff

7 Wood: Yamaha RMX VD 21* with Diamana Whiteboard 60 Stiff

Hybrid : Exotics C721 5 Hybrid with KBS Hy 75 stiff

Utility Iron/ 5 iron: Srixon ZX 23* w MMT 85 stiff

6-pw Matlby TS3 w MMT 85 stiff

50*, 54* Mack Daddy 4 black w Modus 120 stiff

58*  Mack Daddy 3 PM Grind w Modus 120 stiff

Putter: Ben Hogan BHB03 W UST Freq Filtered shaft

Revelation CEO Cart Bag

Link to comment
Share on other sites

On 6/20/2024 at 12:41 AM, ChiefMikeOfficer said:

Welp, it's here. Custom shafts would've delayed delivery by over a month, so I just went stock retro ProForce (looks sick, but likely not gonna work). Current plan is to swap in my 3w shaft, which is 0.5" shorter (but I bet that's ok). Will probably pick out a 44" (0.25" longer) driver shaft in the near future. PXL_20240620_024107159.jpg.2e1977aef06ecb98c35520a352c33cf5.jpg

Can't go copper without some actual flashback/retro pics too, right?? Well, the classic move with the Burner was to turn the cover inside out: PXL_20240620_024241032_MP.jpg.5ed2350c652d7bfa3a613d0b67b1f835.jpg

And then, even though today it's "mini", proof that it's still quite large when comparing to the inspiration (can't believe this was the standard when I started playing HS golf - 40 is really starting to sink in):

PXL_20240620_024341313.jpg.9dae4e2ff18e964cf8ffccf3d19b15ef.jpgPXL_20240620_024327846.jpg.a57129beb975120b75321509e5a83e2a.jpg

I’m late in checking this thread, but wanted to say you may like the stock shaft.  I found it to be excellent.  And such a great club too.  Gorgeous!

Working at getting better ... and very slowly getting there.

  •  :callaway-small: Paradym 🔹🔹🔹 8* (:accra:  Shogun Blue M0 Otto-Phlex)
  •  :taylormade-small: Brnr Mini driver 13.5* (:accra: FX 3.0 140 M1 Otto-Phlex)
  • :callaway-small: Paradym X 4 and 5 Hybrids
  •  Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts:  :projectx: LZ 6.0)
  • :cleveland-small: RTX6 Zipcore 53*, and 58* mid wedges (:projectx: wedge shafts 6.5)
  • :L.A.B.: DF 2.1 (BTG shaft)
  • :redrooster: Gloves

My Official 2024 TaylorMade Qi10 Review:  https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200

My Official 2023 Red Rooster Sussex Glove Review:  https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042

 

Link to comment
Share on other sites

2 minutes ago, IndyBonzo said:

After reading so many fawning reviews, I picked up a Callaway Paradym AI Smoke Triple Diamond Max 9° driver from GG.  (My thumbs are tired from typing the name.)IMG_6373.jpeg.44a2d626b96912fdb28950794b85a8cd.jpeg

I have not yet had range time with it but have played 27 holes now and results have been excellent.  I hope to get to the range later this morning to test some different shafts and dial in the weights.  I am very excited about this driver and its combination of distance and forgiveness.

Also, several of you had heard me rave about the results I get with my vintage Hogan wedges in my backup set.  After playing that set again Friday, and holing out from 30 yards with a sand wedge and hitting a bunch more close, I picked up two more vintage Hogan wedges to try in my gamer set.  Both for less than the cost of one of my Cleveland wedges (which will fight to stay in the bag).  These are eBay pics; will post more when the wedges are in-hand.

IMG_6387.jpeg.6675191d67050303443ae0e89deaa6e9.jpegIMG_6388.jpeg.4496982994ef92143fe1a23863faa3c8.jpegIMG_6389.jpeg.d89bc231fd117a0aa0c15492b77857e0.jpegIMG_6390.jpeg.696d374a853a348bd9dfb8118a5d54e6.jpeg

IMG_6374.jpeg

The Octopus looks quite happy sitting next to that driver (won’t even attempt to type out the whole name)!

TaylorMade SIM 2 Max Driver

TaylorMade Stealth 3 wood

Titleist U510 Hybrid (3H)

TaylorMade Tour Preferred CB Irons

Vokey SM8 Wedges (52/56/60)

Odyssey Ai-ONE 7S Putter

Link to comment
Share on other sites

1 minute ago, TJ Hall said:

The Octopus looks quite happy sitting next to that driver (won’t even attempt to type out the whole name)!

He does look happy doesn’t he?  He may be moving this summer after all.  Lol.  

Working at getting better ... and very slowly getting there.

  •  :callaway-small: Paradym 🔹🔹🔹 8* (:accra:  Shogun Blue M0 Otto-Phlex)
  •  :taylormade-small: Brnr Mini driver 13.5* (:accra: FX 3.0 140 M1 Otto-Phlex)
  • :callaway-small: Paradym X 4 and 5 Hybrids
  •  Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts:  :projectx: LZ 6.0)
  • :cleveland-small: RTX6 Zipcore 53*, and 58* mid wedges (:projectx: wedge shafts 6.5)
  • :L.A.B.: DF 2.1 (BTG shaft)
  • :redrooster: Gloves

My Official 2024 TaylorMade Qi10 Review:  https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200

My Official 2023 Red Rooster Sussex Glove Review:  https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042

 

Link to comment
Share on other sites

I got some Go Play Golf gift cards last year so I finally converted them into one and used it at Worldwide Golf last week. I got two pair spiked shoes (Foot Joy annd Puma) and a golf towel.

BTW, I had to throw away three pair of oldies(FJ BOA and Nike TW’s) All three were over 10 years old.

IMG_5094.jpeg

Driver: image.png.6ba1c8a254ad57aa05e527b74c2e04ba.png0311 XF 10.5* w/Project X Cypher 40 gram Senior shaft or 0811 XF 12* w/Evenflo Riptide CB Senior shaft

Fairways:  image.png.80321f01fc46450b6f428c7daf7b3471.png0211 5W & 7W w/ Evenflo Riptide CB  regular shaft and Tour Edge E521 9W w/Fubuki HD50 regular shaft

Hybrid: None in bag at the moment

IronsTitleist T300 5-PW w/Fubuki MV Senior graphite shafts w/Golf Pride Tour

Wedges: Edison forged 49*, 53* and 57* wedges with KB PGI Senior shafts(80 grm).

Putter: 33” Evnroll ER2 w/Gravity Grip or  ER6 or Bellum Winmore Model 707,   or Nike Method Core Drone  w/Evnroll Gravity Grip or Tommy Armour Impact No. 3

Bag: Vice cart bag(Black/Lime). 

Ball: Bridgestone RXS Mindset, Snell MTB Prime X, Maxfli Tour/S/X CG, Titleist Pro V1x or Titleist TruFeel

Using Shot Scope X5 and Pinned Rangefinder

 

Link to comment
Share on other sites

20 hours ago, sirchunksalot said:

We drove down to Chattanooga to eat at our favorite Chinese buffet tonight and I stopped in at DSG and bought the 4 dozen box of MaxFli Tour golf balls. 

1000009057.jpg.d0143d88e1949395681b5b55d31f5d2a.jpg

I also tried on some Skechers golf shoes to see how they fit since I see them on sale from time to time. They were so comfortable and I thought about picking them up, but am looking for a different color than white. I'll have to check places like Golfetail or Golf Discount to see what they have. 

DKS is the Costco of golf.  If you go in, youre gonna buy sumpin.

#1  PXG 0211 10.5 deg, Evnflo Riptide CB 40 gram A flex.

3W: Callaway Steelhead Xr,  Tensei Blue CK 55 gram A flex.

5W : Titleist TSi 1,    Aldila Ascent 40 regular flex.

Driving Iron: Mizuno MP 18 MMC Fli-Hi 3i 18 degree, Recoil 95 reg flex.

4 iron:  GFF Mizuno Fly-Hi, 24 degree forged hollow body,  Aerotech Steelfiber 😍😃💥.

5 Hybrid: Mizuno (2017) JPX Fli-Hi wave tech, Recoil ESX 460 reg flex.

Irons: 6 - PW: Ping I 500, on Recoil Smacwrap ES 760, reg flex.

Wedges: 2 x Mizuno S5 52/09.  1@ 50 deg, 1@ 54 deg; New (July 2024) Mizu ES 21, 58 x 08, jet black.

Chipper: Don Martin "Up n In" brass/bronze. 🙂

Putter: Odyssey Stroke Lab "R" Ball, face balanced, with 2 piece Stroke Lab multi material shaft.🙃💘

Link to comment
Share on other sites

20 hours ago, sirchunksalot said:

We drove down to Chattanooga to eat at our favorite Chinese buffet tonight and I stopped in at DSG and bought the 4 dozen box of MaxFli Tour golf balls. 

1000009057.jpg.d0143d88e1949395681b5b55d31f5d2a.jpg

I also tried on some Skechers golf shoes to see how they fit since I see them on sale from time to time. They were so comfortable and I thought about picking them up, but am looking for a different color than white. I'll have to check places like Golfetail or Golf Discount to see what they have. 

Try Dicks website for clearance.  I got a pair of Skechy Lynx shoes for $48 incl  Calif sales tax and shipping.  Fit me perfect.  Might get a 2nd at that price. 

#1  PXG 0211 10.5 deg, Evnflo Riptide CB 40 gram A flex.

3W: Callaway Steelhead Xr,  Tensei Blue CK 55 gram A flex.

5W : Titleist TSi 1,    Aldila Ascent 40 regular flex.

Driving Iron: Mizuno MP 18 MMC Fli-Hi 3i 18 degree, Recoil 95 reg flex.

4 iron:  GFF Mizuno Fly-Hi, 24 degree forged hollow body,  Aerotech Steelfiber 😍😃💥.

5 Hybrid: Mizuno (2017) JPX Fli-Hi wave tech, Recoil ESX 460 reg flex.

Irons: 6 - PW: Ping I 500, on Recoil Smacwrap ES 760, reg flex.

Wedges: 2 x Mizuno S5 52/09.  1@ 50 deg, 1@ 54 deg; New (July 2024) Mizu ES 21, 58 x 08, jet black.

Chipper: Don Martin "Up n In" brass/bronze. 🙂

Putter: Odyssey Stroke Lab "R" Ball, face balanced, with 2 piece Stroke Lab multi material shaft.🙃💘

Link to comment
Share on other sites

18 hours ago, Rob Person said:

That's a nice looking bag!

You might have brought the old bag to a laundry/tailor and get a new zipper for $20.

#1  PXG 0211 10.5 deg, Evnflo Riptide CB 40 gram A flex.

3W: Callaway Steelhead Xr,  Tensei Blue CK 55 gram A flex.

5W : Titleist TSi 1,    Aldila Ascent 40 regular flex.

Driving Iron: Mizuno MP 18 MMC Fli-Hi 3i 18 degree, Recoil 95 reg flex.

4 iron:  GFF Mizuno Fly-Hi, 24 degree forged hollow body,  Aerotech Steelfiber 😍😃💥.

5 Hybrid: Mizuno (2017) JPX Fli-Hi wave tech, Recoil ESX 460 reg flex.

Irons: 6 - PW: Ping I 500, on Recoil Smacwrap ES 760, reg flex.

Wedges: 2 x Mizuno S5 52/09.  1@ 50 deg, 1@ 54 deg; New (July 2024) Mizu ES 21, 58 x 08, jet black.

Chipper: Don Martin "Up n In" brass/bronze. 🙂

Putter: Odyssey Stroke Lab "R" Ball, face balanced, with 2 piece Stroke Lab multi material shaft.🙃💘

Link to comment
Share on other sites

9 hours ago, IndyBonzo said:

After reading so many fawning reviews, I picked up a Callaway Paradym AI Smoke Triple Diamond Max 9° driver from GG.  (My thumbs are tired from typing the name.)IMG_6373.jpeg.44a2d626b96912fdb28950794b85a8cd.jpeg

I have not yet had range time with it but have played 27 holes now and results have been excellent.  I hope to get to the range later this morning to test some different shafts and dial in the weights.  I am very excited about this driver and its combination of distance and forgiveness.

Also, several of you have heard me rave about the results I get with my vintage Hogan wedges in my backup set.  After playing that set again Friday, and holing out from 30 yards with a sand wedge and hitting a bunch more close, I picked up two more vintage Hogan wedges to try in my gamer set.  Both for less than the cost of one of my Cleveland wedges (which will fight to stay in the bag).  These are eBay pics; will post more when the wedges are in-hand.

IMG_6387.jpeg.6675191d67050303443ae0e89deaa6e9.jpegIMG_6388.jpeg.4496982994ef92143fe1a23863faa3c8.jpegIMG_6389.jpeg.d89bc231fd117a0aa0c15492b77857e0.jpegIMG_6390.jpeg.696d374a853a348bd9dfb8118a5d54e6.jpeg

 

I have the same chrome Hogan Sure Out.  Love that sole, weighs in at 3 pounds, I think, like a 15 inch bass.  Might not be the most accurate sandy but is very reliable.  I am on my 2nd.  I keep thinking I should buy a bunch of them and donate to a local range teacher who teaches lots of kids.  (I also use a very vintage Don Martin chipper.) 

#1  PXG 0211 10.5 deg, Evnflo Riptide CB 40 gram A flex.

3W: Callaway Steelhead Xr,  Tensei Blue CK 55 gram A flex.

5W : Titleist TSi 1,    Aldila Ascent 40 regular flex.

Driving Iron: Mizuno MP 18 MMC Fli-Hi 3i 18 degree, Recoil 95 reg flex.

4 iron:  GFF Mizuno Fly-Hi, 24 degree forged hollow body,  Aerotech Steelfiber 😍😃💥.

5 Hybrid: Mizuno (2017) JPX Fli-Hi wave tech, Recoil ESX 460 reg flex.

Irons: 6 - PW: Ping I 500, on Recoil Smacwrap ES 760, reg flex.

Wedges: 2 x Mizuno S5 52/09.  1@ 50 deg, 1@ 54 deg; New (July 2024) Mizu ES 21, 58 x 08, jet black.

Chipper: Don Martin "Up n In" brass/bronze. 🙂

Putter: Odyssey Stroke Lab "R" Ball, face balanced, with 2 piece Stroke Lab multi material shaft.🙃💘

Link to comment
Share on other sites

11 hours ago, IndyBonzo said:

After reading so many fawning reviews, I picked up a Callaway Paradym AI Smoke Triple Diamond Max 9° driver from GG.  (My thumbs are tired from typing the name.)IMG_6373.jpeg.44a2d626b96912fdb28950794b85a8cd.jpeg

I have not yet had range time with it but have played 27 holes now and results have been excellent.  I hope to get to the range later this morning to test some different shafts and dial in the weights.  I am very excited about this driver and its combination of distance and forgiveness.

Also, several of you have heard me rave about the results I get with my vintage Hogan wedges in my backup set.  After playing that set again Friday, and holing out from 30 yards with a sand wedge and hitting a bunch more close, I picked up two more vintage Hogan wedges to try in my gamer set.  Both for less than the cost of one of my Cleveland wedges (which will fight to stay in the bag).  These are eBay pics; will post more when the wedges are in-hand.

IMG_6387.jpeg.6675191d67050303443ae0e89deaa6e9.jpegIMG_6388.jpeg.4496982994ef92143fe1a23863faa3c8.jpegIMG_6389.jpeg.d89bc231fd117a0aa0c15492b77857e0.jpegIMG_6390.jpeg.696d374a853a348bd9dfb8118a5d54e6.jpeg

 

I haven’t seen the TD MAX in stock at GG Castleton lately. Is that where you got it? I’m hoping the Callaway rep/fitter I had the free fitting with will be there when I go as he might let me try a couple of alternate shafts. Ha ha

2024 WITB:

Driver::callaway-logo-1: Ai Smoke 🔹🔹🔹 MAX 9* w. Denali 60g 6.5 (XS)

FW woods: :titleist-small:TSR2+ 13* '2W' w. Mitsubishi Tensei White 75X & TSR2 21* 7W w. Mitsubishi Tensei White 75X

Hybrid: :taylormade-small:Stealth+ 3H (@18*) w. :projectx: Hzrdus Smoke RDX Red 80/6.5

Irons: :taylormade-small: 5i-PW: '17 P790 w. :kbs: Tour C-Taper Lite 115X (Incoming soon: :taylormade-small: 4i-PW: 2024 P770 w. :projectx: Rifle 6.0 (+1/4"))

Wedges: :taylormade-small: 50/09 MG4; 56/12 MG4TW Raw; :vokey-small:SM9 60/04L

Putter: :scotty-cameron-1: Phantom X7

Ball: :taylormade-small: TP5x //  :callaway-small: Chrome Tour // Maxfli Tour X

Other: :Arccos:. Gogogo Sport V-Pro rangefinder;  :Ogio: Woode Hybrid Stand Bag; :BagBoy: Nitron push cart.

2024 Tests:

"...pray that there's intelligent life somewhere up in space, 'cause there's bugger all down here on Earth!"- Eric Idle

Link to comment
Share on other sites

16 minutes ago, cnosil said:

Got the club out to the course today; I loved the ball flight and it was easy to hit.  Hit a few off the tee and hit one from the fairway (not a great place to try but it was the 18th hole and distance seemed about right) and it was definitely higher than my TS3 was launching the ball.   

The 16.5* is an awesome club.  I have the TSR2 16.5* and I hit it off the tee or fairways with shot shaping ability.  

Glad to hear the new club is working out well for you so far!

:callaway-small: Paradym TD Driver w/ Ventus Blue 6S

:ping-small: 3W

:srixon-small: MKII ZX 5's (4-6) w/ KBS Tour V

:srixon-small: MKII ZX 7's (7-PW) w/ KBS Tour V

:titleist-small: Vokey Wedges 50* 54* 58*

:L.A.B.: DF2.1 Putter

Link to comment
Share on other sites

42 minutes ago, Indy_Oz said:

I haven’t seen the TD MAX in stock at GG Castleton lately. Is that where you got it? I’m hoping the Callaway rep/fitter I had the free fitting with will be there when I go as he might let me try a couple of alternate shafts. Ha ha

Mine came from the online store!

Working at getting better ... and very slowly getting there.

  •  :callaway-small: Paradym 🔹🔹🔹 8* (:accra:  Shogun Blue M0 Otto-Phlex)
  •  :taylormade-small: Brnr Mini driver 13.5* (:accra: FX 3.0 140 M1 Otto-Phlex)
  • :callaway-small: Paradym X 4 and 5 Hybrids
  •  Maltby TS3 (4-8)/TS4 (9-PW)/TS1 (GW) (shafts:  :projectx: LZ 6.0)
  • :cleveland-small: RTX6 Zipcore 53*, and 58* mid wedges (:projectx: wedge shafts 6.5)
  • :L.A.B.: DF 2.1 (BTG shaft)
  • :redrooster: Gloves

My Official 2024 TaylorMade Qi10 Review:  https://forum.mygolfspy.com/topic/62804-taylormade-qi10-drivers-2024-forum-member-review/?do=findComment&comment=1014200

My Official 2023 Red Rooster Sussex Glove Review:  https://forum.mygolfspy.com/topic/58614-2023-mgs-forum-member-test-red-rooster-sussex-golf-glove/#comment-911042

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...