Shaft refit.

[redvet]

Anyone please advise if it is possible to remove Graphite Design YSQ 45 gram driver shaft which is fitted in old RBZ Driver and fit into Titleist 913D2 Driver head.

[cnosil]

Anyone please advise if it is possible to remove Graphite Design YSQ 45 gram driver shaft which is fitted in old RBZ Driver and fit into Titleist 913D2 Driver head.

Yes it is possible. Would need to pull the shaft and Put on the adapter. Shafts are shafts and can be moved from club to club.

Some things to consider:

Look at the tip size for both drivers to make sure they are the same or what you might have to do to make it fit if they aren’t.

Depending on bore depth you may get a different length driver

depending on the amount of shaft prep that was required it may not all get covered up

Don’t pull a graphite shaft unless you have the right tools since you could damage the tip and
Make it unusable.

The shaft may not work well/perform the same in the new driver