Jump to content

What have you bought lately? (CHA - Club Ho's Anonymous)


hckymeyer

Recommended Posts

Joined the Xtreme team.... [emoji846]
This will hopefully be an upgrade from my F7+
image.png.4cc5659710b37c84bd10e6e9e2076a87.png

[emoji33][emoji33][emoji33] now that’s different than the type of head you’ve been playing.

Same shaft as your F7?


Sent from my iPhone using Tapatalk
  • Like 6

#COBRACONNECT CHALLENGE 4 ALUMNUS

:callaway-small: Epic Max LS 10.5 - Motore X F3 6x | :cobra-small: Speedzone 5-wood - Ventus Blue 8s | :titelist-small: TSi3 20* Hybrid - KBS Proto 85s

:cobra-small: KING Forged Tec 5-GW - Nippon Modus 120x | :cobra-small: KING MIM Black 52.12C, 56.10V, 60.04W - Nippon Modus 125 Wedge

:EVNROLL: ER2B | :titelist-small: Pro V1x | :918457628_PrecisionPro: NX9 Slope

 

Link to comment
Share on other sites

4 minutes ago, B.Boston said:


emoji33.pngemoji33.pngemoji33.png now that’s different than the type of head you’ve been playing.

Same shaft as your F7?


Sent from my iPhone using Tapatalk

Suppose I'm stubborn... realize I'd rather take the middle of the fwy than the extra 10 yards.

I will use the same shaft as my F7+.... love the fact that Cobra has stuck with the same adapter over the years.  

  • Like 7

I got something to say then I'm gonna say it. 

Link to comment
Share on other sites

3 hours ago, Nunfa0 said:

Finally going to post this, bought a set of 2016 Cobra Forged Tec irons for about $280 US, brand new in the box. Only got them because they were so cheap and I've wanted to try them for ages. They feel beautiful off the face 😍

IMG_20200704_144923.jpg.fa01bf9e4ebb371dc03043fa9f9a57c0.jpgIMG_20200704_144933.jpg.8803afbc9233957e528ffc206a091028.jpg

Nice find mate! Were those the stock shaft offering or is that what you were looking for?  I've really enjoyed the C-Taper Lite I have in my AP2s.  

What do you think about the size/shape difference from the F9s?

  • Like 4

#COBRACONNECT CHALLENGE 4 ALUMNUS

:callaway-small: Epic Max LS 10.5 - Motore X F3 6x | :cobra-small: Speedzone 5-wood - Ventus Blue 8s | :titelist-small: TSi3 20* Hybrid - KBS Proto 85s

:cobra-small: KING Forged Tec 5-GW - Nippon Modus 120x | :cobra-small: KING MIM Black 52.12C, 56.10V, 60.04W - Nippon Modus 125 Wedge

:EVNROLL: ER2B | :titelist-small: Pro V1x | :918457628_PrecisionPro: NX9 Slope

 

Link to comment
Share on other sites

On 7/4/2020 at 10:49 PM, dlow206 said:

Here's my new Mavrik 4 wood with the shaft that I pulled and put in. Its a Ventus 7S (real one). Notice that it has a "2ndSwing" inscription. I am living with that because I got the shaft and a left handed Mavrik 3 wood for $250. I pulled the left hand Mavrik 3 wood and put it in the stock 4 wood shaft and then am going to send it back as a trade in.

 

IMG_7039.JPG.1d11d8c7924bdd8e417a16685c40d6f3.JPG

IMG_7040.JPG.933b75b18515c93608f502de914c33df.JPG

IMG_7041.JPG.c9678f416980d0dafd96ab1b9ad0d13d.JPG

and the swap is complete!  That didn't take long.  Looks like a sweet combo!

  • Like 3

#COBRACONNECT CHALLENGE 4 ALUMNUS

:callaway-small: Epic Max LS 10.5 - Motore X F3 6x | :cobra-small: Speedzone 5-wood - Ventus Blue 8s | :titelist-small: TSi3 20* Hybrid - KBS Proto 85s

:cobra-small: KING Forged Tec 5-GW - Nippon Modus 120x | :cobra-small: KING MIM Black 52.12C, 56.10V, 60.04W - Nippon Modus 125 Wedge

:EVNROLL: ER2B | :titelist-small: Pro V1x | :918457628_PrecisionPro: NX9 Slope

 

Link to comment
Share on other sites

46 minutes ago, GolfSpy Stroker said:

Joined the Xtreme team.... 🙂

This will hopefully be an upgrade from my F7+

image.png

 

... No question the Xtreme is an upgrade from the F7+. Whether or not you hit it better is the question. 👍

  • Like 4

Driver:   TaylorMade SIM2 Max 10.5* ... Diamana Ltd 60R
Fairway:  TaylorMade SIM2 Max 15* ... Tensei Raw Blue 65R
                 TaylorMade SIM2 Max 18* ... Tensei Raw Blue 65R
Utility:   TaylorMade DHy 19* ... Diamana Ltd 65R
              Taylor Made Sim Hybrid 22* ... Diamana Ltd 75R
Irons:    4-Pw Cobra King Tour MIM ... Steelfiber 95R
Wedges:  Cobra Snakebite 50* ... Steelfiber 95R
                 TaylorMade MG3 58* LB ... Steelfiber 95R
Putter:  Cleveland Hunting Beach Soft 11S 33.5"
Ball:      TaylorMade TP5x (2021)

Link to comment
Share on other sites

I guess my original photo never got posted.

 

Maltby2.jpg

  • Like 9

th.jpg.d6e2abdaeb04f007fd259c979f389de6.jpg Gen1 0811X 12° driver w/Project X Evenflow Blue 55g shaft
post-76102-0-38507100-1525284411.jpg KE4 TC 16° 4 wood w/Kuro Kage Black 60g shaft

:srixon-small: Z355 22° 7 wood w/Miyazaki Jinsoku shaft
post-76102-0-38507100-1525284411.jpg KE4 TC 19° 3 hybrid w/UST Proforce V2 Black shaft
post-76102-0-38507100-1525284411.jpg KE4 TC 22° 4 hybrid w/UST Proforce V2 Black shaft

:tour-edge: HL E521 25° 5 hybrid w/Fubuki HD55 shaft

post-76102-0-38507100-1525284411.jpg Sti2 6 iron w/UST Recoil 660 graphite shaft
post-76102-0-38507100-1525284411.jpg KE4 Tour+ irons 7-PW w/UST Competition Series graphite shafts

:cleveland-small: CBX2 50° wedge

post-76102-0-38507100-1525284411.jpg M-Series+ 56° wedge w/UST Recoil 660 graphite shaft
:cleveland-small:  Huntington Beach Soft Premier 10.5

Link to comment
Share on other sites

On 7/4/2020 at 10:49 PM, dlow206 said:

Notice that it has a "2ndSwing" inscription.

Is that painted on? (That kinda sucks, imho.)
Or a sticker you can peel off? (More commonly used it seems.)

  • Like 2

WITB of an "aspiring"  😉 play-ah ...
..Callaway Epic Speed 4W and Epic Max 7W (both Project X Cypher)
..Callaway Big Bertha 4H and 5H (both Recoil ZTR)
..PXG 0211 6i-GW (Mitsubishi MMT) 
..Cleveland CBX-2 54 and CBX 60 (both Rotex graphite)
...Edel EAS 4.0 (stock shaft, zero offset hosel, round grip)
..all in a Datrek bag on an MGI Zip Navigator electric cart.

Forum Member tester for the ExPutt Putting Simulator (2020)

Link to comment
Share on other sites

On 7/4/2020 at 11:03 PM, tehuti said:

My putter was sporting this new cover today.

You a Queens guy??
(I grew up, and we live now, on Long Island; my wife grew up in Queens.)

WITB of an "aspiring"  😉 play-ah ...
..Callaway Epic Speed 4W and Epic Max 7W (both Project X Cypher)
..Callaway Big Bertha 4H and 5H (both Recoil ZTR)
..PXG 0211 6i-GW (Mitsubishi MMT) 
..Cleveland CBX-2 54 and CBX 60 (both Rotex graphite)
...Edel EAS 4.0 (stock shaft, zero offset hosel, round grip)
..all in a Datrek bag on an MGI Zip Navigator electric cart.

Forum Member tester for the ExPutt Putting Simulator (2020)

Link to comment
Share on other sites

On 7/5/2020 at 9:20 PM, FrogginBullfish said:

Ordered one of those Puma Optimized Variables polos that Bryson wore on Saturday.

Does it come with 365 yd drives included? 😜

  • Like 4
  • Haha 4

WITB of an "aspiring"  😉 play-ah ...
..Callaway Epic Speed 4W and Epic Max 7W (both Project X Cypher)
..Callaway Big Bertha 4H and 5H (both Recoil ZTR)
..PXG 0211 6i-GW (Mitsubishi MMT) 
..Cleveland CBX-2 54 and CBX 60 (both Rotex graphite)
...Edel EAS 4.0 (stock shaft, zero offset hosel, round grip)
..all in a Datrek bag on an MGI Zip Navigator electric cart.

Forum Member tester for the ExPutt Putting Simulator (2020)

Link to comment
Share on other sites

7 hours ago, Nunfa0 said:

Finally going to post this, bought a set of 2016 Cobra Forged Tec irons

Nice looking iron!!
I'm liking that heel-toe weighting 👍

  • Like 3

WITB of an "aspiring"  😉 play-ah ...
..Callaway Epic Speed 4W and Epic Max 7W (both Project X Cypher)
..Callaway Big Bertha 4H and 5H (both Recoil ZTR)
..PXG 0211 6i-GW (Mitsubishi MMT) 
..Cleveland CBX-2 54 and CBX 60 (both Rotex graphite)
...Edel EAS 4.0 (stock shaft, zero offset hosel, round grip)
..all in a Datrek bag on an MGI Zip Navigator electric cart.

Forum Member tester for the ExPutt Putting Simulator (2020)

Link to comment
Share on other sites

7 hours ago, B.Boston said:

Nice find mate! Were those the stock shaft offering or is that what you were looking for?  I've really enjoyed the C-Taper Lite I have in my AP2s.  

What do you think about the size/shape difference from the F9s?

The C-Tapers are the stock shafts. I have XP95s in my F9s so the new ones are a bit heavier. The Forged Tec shafts are also a little shorter.

The heads are about the same length and face size, the forged tecs have a slightly thicker top line but the soles are way smaller. Also the F9s have lots of junk in the trunk, the forged tecs are slim by comparison.

  • Like 5

 

In my :cobra-small: Ultralight Stand Bag:

Driver:    :cobra-small: King F9 9° - LH - Atmos Blue TS 6 Stiff
Woods:   :cobra-small: King F9 - LH - 3/4 Wood - Atmos Blue 7 Reg
               :srixon-small: Z U85 2 Iron
Irons:     :titelist-small: T200 4 Iron AMT White S300
  :titelist-small: T100S - LH - 3-48* - AMT White S300
Wedges: :cleveland-small:     RTX Zipcore - LH - 52° 56° 60° - True Temper Spinner Wedge shafts
Putter:    :rife-putters-1: Barbados Island 2
Ball:        :titelist-small: Pro V1x

Tracked By: :Arccos:

Follow me on Twitter @ham12_hampton and on Instagram @Nunfa0 

 

Link to comment
Share on other sites

4 hours ago, cksurfdude said:

Nice looking iron!!
I'm liking that heel-toe weighting 👍

Thanks mate, the weighting stops at 7 iron, 8 down are far more traditional.

  • Like 3

 

In my :cobra-small: Ultralight Stand Bag:

Driver:    :cobra-small: King F9 9° - LH - Atmos Blue TS 6 Stiff
Woods:   :cobra-small: King F9 - LH - 3/4 Wood - Atmos Blue 7 Reg
               :srixon-small: Z U85 2 Iron
Irons:     :titelist-small: T200 4 Iron AMT White S300
  :titelist-small: T100S - LH - 3-48* - AMT White S300
Wedges: :cleveland-small:     RTX Zipcore - LH - 52° 56° 60° - True Temper Spinner Wedge shafts
Putter:    :rife-putters-1: Barbados Island 2
Ball:        :titelist-small: Pro V1x

Tracked By: :Arccos:

Follow me on Twitter @ham12_hampton and on Instagram @Nunfa0 

 

Link to comment
Share on other sites

Just ordered some of the new MCC teams grips in blue/white. I just put some of the MCC Plus4 Tour Velvets on my irons a month or so ago and I think I prefer the corded upper area. So if anyone is considering buying any Plus4 velvets, lemme know and I’ll give you a good deal on some.

  • Like 4

:ping-small: G400 Max

:ping-small: G410 3W

:ping-small: G410 3 & 4 Crossover

:ping-small: i200 5-PW

:vokey-small: Vokey SM7 | 52-56-60

:taylormade-small: Taylormade Spider X

 

 

Link to comment
Share on other sites

18 hours ago, tehuti said:

I guess my original photo never got posted.

 

Maltby2.jpg

Might be the head to make the GOST come to life....

  • Like 2

 

In my :cobra-small: Ultralight Stand Bag:

Driver:    :cobra-small: King F9 9° - LH - Atmos Blue TS 6 Stiff
Woods:   :cobra-small: King F9 - LH - 3/4 Wood - Atmos Blue 7 Reg
               :srixon-small: Z U85 2 Iron
Irons:     :titelist-small: T200 4 Iron AMT White S300
  :titelist-small: T100S - LH - 3-48* - AMT White S300
Wedges: :cleveland-small:     RTX Zipcore - LH - 52° 56° 60° - True Temper Spinner Wedge shafts
Putter:    :rife-putters-1: Barbados Island 2
Ball:        :titelist-small: Pro V1x

Tracked By: :Arccos:

Follow me on Twitter @ham12_hampton and on Instagram @Nunfa0 

 

Link to comment
Share on other sites

Thanks to @dlow206 for helping to push me over the edge and grab the original stability shaft at a great price.  I had tried a putter with this shaft at Club Champion and remember being impressed.  I was a tester last year for the stroke lab and noticed a small difference with that, but still it wasn't as good as the stability shaft.  Maybe it doesn't make any difference, but even if I gain some confidence from it, then it's a worthwhile purchase for me.

I did remember how easy it felt to make a proper stroke with the stability shaft when I tried it out.  It was almost as if I had to TRY to hit offline with the shaft.  Still going to be about pace and green reading as well, but I think my start line should improve even more.

 

  • Like 6

Driver:  image.png.3c6db1120d888f669e07d4a8f890b3f1.pngMavrik Sub Zero 9* (Set to 10) Ventus Blue 6X

2 Hybrid: :titelist-small: TSI3 Hybrid Tensei Blue 80 X

4 Iron - Srixon ZX 23* Recoil F5                                                     Testing: :titelist-small: T200 4 Iron Graphite Design Tour AD IZ X Hybrid Shaft

Irons 5-PW: :mizuno-small: MP 18 SC Dynamic Gold AMT X                   Testing: :titelist-small: T100-S 5 - GW KBS Tour 130 X

Gap/Sand Wedge:  :titelist-small: Vokey SM6 49*  SM8 54* 

Lob Wedge:  image.png.3c6db1120d888f669e07d4a8f890b3f1.pngJaws 5 Wedge 58* DG Tour Issue Stiff

Putter:   :scotty-small: Phantom 5.5 34"      Pro Platinum Newport 2 35"      Taylormade Tour Black Spider 34"

Link to comment
Share on other sites

A small putter experiment that after one round is pretty good move.
 
FD780391-2B8A-44F9-ABF3-6620C11D07D3.jpeg.29b9233be89023787164423084fe6da0.jpeg
5B6A9784-35BB-4594-B813-0976107BA551.jpeg.49db7cc76ee9babf143dd195e97d1168.jpeg

What grip and shaft were you using previously?
  • Like 1

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :callaway-small: 54-10S   :cleveland-small: 588  58-12
Putter:  :seemore-small: mFGP2

Backups:  :bobby-grace-1: 6330, :taylormade-small:TM-180, :odyssey-small: Milled Collection RSX 2, Bellum Winmore 787

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to comment
Share on other sites

27 minutes ago, cnosil said:


What grip and shaft were you using previously?

It’s an all new setup. I didn’t want to mess with my scotty. I ended up buying the miura km-009 and had that shaft put in it. The pistolero grip from miura isn’t one that was an option from will people’s for the build so I went with the ping grip

  • Like 3

Driver: PXG 0811 X+ Proto w/UST Helium 5F4

Wood: TaylorMade M5 5W w/Accra TZ5 +1/2”, TaylorMade Sim 3W w/Aldila rogue white

Hybrid: PXG Gen2 22* w/AD hybrid

Irons: PXG Gen3 0311T w/Nippon modus 120

Wedges: TaylorMade MG2 50*, Tiger grind 56/60

Putter: Scotty Caemeron Super Rat1

Ball: Titleist Prov1

Link to comment
Share on other sites

49 minutes ago, juspoole said:

Thanks to @dlow206 for helping to push me over the edge and grab the original stability shaft at a great price.  I had tried a putter with this shaft at Club Champion and remember being impressed.  I was a tester last year for the stroke lab and noticed a small difference with that, but still it wasn't as good as the stability shaft.  Maybe it doesn't make any difference, but even if I gain some confidence from it, then it's a worthwhile purchase for me.

I did remember how easy it felt to make a proper stroke with the stability shaft when I tried it out.  It was almost as if I had to TRY to hit offline with the shaft.  Still going to be about pace and green reading as well, but I think my start line should improve even more.

 

Are you going to be installing it yourself or having someone else install it?

Follow my golf journey to break into the 80s

Tester for the Titleist TSi Driver

Spring 2020 MGS Tester for the Fujikura Motore X Shaft

Updated 11/13/2021
Driver:titelist-small: TSi 2 - Autoflex
Fairway Woods:titelist-small: TSi2 3 wood, 5 wood - Aldila Ascent 60 S
Irons:titelist-small: T300 5 to SW - LAGP AXS Red 85 Stiff double soft stepped
Wedges:Miura: K-grind 2.0 58 wedge - Xcaliber RT Spin Wedge 100
Putter:  SIK DW Armlock - LAGP 180 armlock shaft

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...