Cold bluing wedges

[Chorlz 0]

Hi,

I just wanted to share my experience with cold bluing my wedges. The pictures on the left were the wedges after being soaked in coke overnight and rubbed with a steel whool. I used birchwood casey's bluing kit to blue my wedges and they turned out amazing! So if anyone was wondering if they could do this themselves, well, you absolutely can ;).

 

 

Edited October 22 by Chorlz

[hckymeyer 6,205]

Looks great, I've done putters before but never wedges.  I'd assume they start showing wear almost immediately.  Have you played with them yet?

Also for anyone looking to follow suit you have to make sure of what type of metal you are starting with.  Aluminum and Stainless need a different type of gun blue (not seen very often in wedges anyway) and if they are chome plated you'd have to strip that first and that's not something you want to take on without some prior knowledge and the proper setup.

[Chorlz 0]

I mean, some wedges come factory like that, so the wear is identical to those. I think the cg15 wedges come in a black finish and they do wear overtime. But you can always refinish them after every season. Takes like 45 min to an hour.