What Wedges Are You Currently Using?

[USMCSnyper]

I play the RTX Zipcores in 54 and 58. Looking to replace them this year. I like the looks of the sub70 wedges (all of them really, but love the TAIII) Thoughts @GolfSub70

Suggestions for a decent wedge player with inconsistent swings?

[Bob Jerabek]

I have played Vokey for many years. Currently have 48/10, 54/14, and 58/12 in the bag.

[Wakit300]

Mizuno T20 wedges: 55° Blue & 60° Raw.

They have plenty of play left in them so don't anticipate changing them soon but just in case have a new T22 Blue in waiting.

 

[Jean D]

Cleveland RTx4 in 52°, 56° & 60°, True Temper Dynamic Gold 105 Tour, Golf Pride CP2 Wrap Jumbo grips.

[Back9Scott]

On 2/7/2024 at 12:03 AM, GolfSpy_APH said:

We want to hear and see what wedges are currently in your bag! Inspired by @Golfspy_CG2 new Vokey SM10 wedges which look amazing it is time to hear from the community about what are the most common wedges our member use!

Photos are encouraged! 

What lofts are they? 

Are they new? Or are you getting new wedges this season? If so waiting on any specific wedge release? 

Let us know! 

I run a sm4 52,56 and a raw 60. Would it be weird to drop my 52 and 56 and just add a 54?

[fozcycle]

I played Cleveland Zipcores, 50/54/58 until a year ago when my wife gave me Edison 53* and 57*. So I gamed them with a Titleist T300 48* GW. Well, I finally replaced the T300 GW with an Edison 49*. The flight is lower but man, the bite is real. My Edison’s are all 1.0

[tacotollefson67]

Ping Glide 3.0 50, 54, 58 Love Them!

[Northern Monkey]

Jaws MD5 50, 54 & 58

[Beclay]

Believe it or not, I just got back into golfing and bought the Kirkland set. Seem to be playing rather well. Would really like to test the pings and see what I'm missing. Taking my game seriously want to become a scratch golfer. Driving the wife nuts.

[Dead Solid Bogey]

15 hours ago, fozcycle said:

I played Cleveland Zipcores, 50/54/58 until a year ago when my wife gave me Edison 53* and 57*. So I gamed them with a Titleist T300 48* GW. Well, I finally replaced the T300 GW with an Edison 49*. The flight is lower but man, the bite is real. My Edison’s are all 1.0

I have 2.0 Edison Enforcers… 49°,55°, and 59° have had them for over 3 months. The courting process has been long and hard. Most of the time they are still gaming me and not the other way around… But there are occasions that will give me a glimmer of hope. 

[fozcycle]

6 hours ago, Dead Solid Bogey said:

I have 2.0 Edison Enforcers… 49°,55°, and 59° have had them for over 3 months. The courting process has been long and hard. Most of the time they are still gaming me and not the other way around… But there are occasions that will give me a glimmer of hope. 

Keep at it. The flight is different but the bite is terrific.

[Seanmiller]

Vokey SM8, 52 and 58 degree. They’ve been brilliant for me but before that I had a couple sets of the callaway Mack daddy wedges which were also brilliant. The very best wedges I’ve had were the taylormade tp wedges from quite a few years ago

[Tina B]

Cleveland RTX 6 ZipCore Black Satin 

[Brad Lee]

I currently play the SM9, 50, 54 and 60. I just dumped the stock TrueTemper shaft and dropped in Rifle 7.0 8 iron shafts, cut to spec.  From what I read it will lower the ball flight and give me a little more stopping power.  Hit em at an indoor dome and they feel nice. Has anyone else dropped 8 iron shafts in their wedges?  What has been your feedback on the course?

[mackdaddy]

On 2/7/2024 at 8:10 PM, mackdaddy said:

I play the set pitching wedge from my KZG irons.

I have a Cleveland CBX 50* 

I have a Taylormade MG 3 Tiger grind 56* bent to 54* 

Currently I have a Renegar 58* which I will replace in March with a Taylormade MG 4 Tiger grind 56* bent to 58* that I need to put a grip on.

I have two brand new Renegar 58* wedges I would be willing to sell for $100 each plus shipping if anyone is interested. 

I decided to change my 58* this year.  I ordered a Taylormade MG 4 56* Tiger grind bent to 58/14.  The spin I was getting from my 54 was just so much better than my Renegar 58* that I knew I needed to switch the 58* too.  I did not like the Tiger grind 60 bent to 58* when I bought it in MG 3, so I went with the Renegar last year.  After a year of playing the Tiger 56 bent to 54/10 I knew I need to try one bent to 58/14.  I like it for my home course where we have the rough grown deep and thick.  I like to fly the ball closer to the hole out of the rough and this club stops better.  I have never played a face that feels more abrasive.   I had an old Titleist Vokey spin milled wedge that was a near match and I loved that wedge.

[ED13]

I currently have Taylormade milled grind 3 black wedges in 50, 54, 58 as well as a SM9 60 degree bent to a 62 for flop shots that I had fitted.

Also have a back up set still in plastic when needed. 

[Hoyoymac]

Didn’t like the Vokey SM8 wedges so I switched from Vokey SM7 wedges to Corey Paul wedges a few years ago and have never looked back.

Raw forged steel.  Feel is great and performance has been stellar.

I have tinkered with grinding the soles and the leading edge to get exactly what I want from a bounce, heel, toe, and trailing edge relief.  Plus the various stampings and laser etching options are just very cool to me.

Build them at home with the shafts and grips I want, throw some BB&F ferrules on them and get them swing weighted a little heavier which I prefer.  

Just perfect!

[Kizashi76]

Miura 52dg Chikara 57dg Chikara 60dg.Both Chikara are the LH prototype and very versatile.

 

[JMan_921]

Vokey SM4 50° (love this model. So well balanced and got it regrooved recently)

vokey SM8 54° and vokey SM8 58°

As nice as the newer models are, those sm4 are my favorite. Need to find new or mint condition in other degrees. 

[Al_Mack]

Cleveland for my wedges.

RTX Zipcore: 60degree, 56degree, 52degree.

 

 

Cheers.

 

[FromRightToLeft]

I just got my first Vokey, SM9 56, M Grind. Can't wait to get out and use it.

[Hobert]

I won a set of JAWS Raw wedges in the Christmas/Holiday raffle at our club, so I am currently using those (and like them). Was headed towards a full Sub 70 set prior to getting lucky.

[warrenator8]

Currently I play the Vokey SM9s in a 50, 54 bent to a 55, and a 60. Love them around the greens and love the feel of the 50 and 55 on fuller shots.

[Jimn3767]

Gaming the Jaws Raw here in 50*, 54 bent to 55* and a 60*. Been happy with them till the 60* was giving me some issues last year. 60* is back in the bag and not having issues right now. Considered the full toe in the 60 but haven't pulled the trigger yet.

[unccross]

currently have a mixed bag. Cleveland cbx zipcore 50 and ping glide 3.0 56.  Getting ready to get Cleveland CBX4 zipcore 56 & 60 for my birthday.

[garethlow]

52-08 Vokey SM4 
56-12 Vokey SM9
60-12 Vokey SM9

The wedges have served me well as a beginner golfer. Was thinking in the future to change my 52 degrees to 50 degrees perhaps. My Pitching wedge is 45 degrees currently and do find the gapping was too wide. 
Also somehow still find that in my full swing of 56 and 60 degree wedges, distances are pretty much the same. I believe that is because of my technique for sure. 

[Hicksy]

Went to Ping for wedge fitting and picked up the S159 54 and 58. Been using them a few weeks now and while I am finding full shots difficult to dial in, precision shots can only be described as “magic”

[BallsLeon]

On 2/7/2024 at 8:26 AM, BallsLeon said:

Have 5 wedges in the bag. 
3 Indi FLX-S grind 52°-10° bounce/56°-12° bounce/60°-8° bounce

2 T200 set wedges PW 43°/ AW 48°

 

Been having the best luck with the highest bounce 56 lately. Debating dropping the 60°, and bending the 52° & 56° to 54° & 58°, respectively.

Vokey fitting tool recommending 54.10 S and 58.14 K.

[Erin B]

Just got a 50, 52, and 56 TM MG4 wedges, the 56 is a TW grind. They’re replacing my PXG 0311 wedges. When I hit them at the PGA store I was getting over 10K spin, with the Volkey I was around 9K spin. 

It was an impulse buy….damnit I needed new wedges…don’t judge  

[Mdrnsamurai]

picked up some new SM10's 50.08* F, 56.10* S, and 60.14* K...

and kinda killing it with them...