AutoFlex Dream7 Driver Shafts - 2024 Forum Member Review

[Iamsecond116]

Congratulations to the testers! Will be following this one closely!.

[LeakyValve]

Congrats testers. Interested to see your fitting processes!

[Flerric]

Congrats to all the testers. Super excited to follow this one. 
 

[Swood1994]

Congrats everyone! This is a great group of testers and I’m looking forward to your reviews!

[ILMgolfnut]

Congrats to the testers! Will be interested to see the fitting process and how the test goes for each of you!

[tdroma98]

Congratulations Testers!  Looking forward to finding out if you all find a difference in a specialty driver shaft vs the stock shafts.  Have fun with the testing & Good Luck!! 

[chisag]

7 hours ago, bens197 said:

Congrats fellas!  Hope you all do well with this one. Looking at you @chisag…will this be as good as that red?  It’ll be fun to watch. 

 

... Thanks amigo! I can't imagine a better test for the Autoflex. Recently finding my Holy Grail with the standard Qi10 and dialing in my Ventus Red Velo has me driving the ball better than anytime in my golfing life. But who doesn't like longer if it is equally accurate? Super excited about testing the Dream 7 and sharing the results with my online golf family. 

[C_Daddy19]

Congrats to all testers! Hopefully these shafts really are a "Dream" for you!

[revkev]

Great group - congrats to those selected. Looking forward to reading about this test for certain. 

[Hook DeLoft]

Congrats testers!

[Vegan_Golfer_PNW]

Hot dang a great group of testers! Hit them well. I may need to amp up my speed work to keep ahead of @Kenny B and hit new found distance here! Congrats all

[KC Golf]

3 hours ago, revkev said:

Great group - congrats to those selected. Looking forward to reading about this test for certain. 

I am super excited with this Testing opportunity.  Heard a lot over years about Autoflex and have seen a few shafts but never actually tried one.  So the chance to try the new Dream 7 is really exciting.  

Thank you to the Mods for selecting me.  I am very honoured.

I will give the Forum some detailed analysis comparing this shaft to my GD Tour AD DI 6S.  Looking forward to seeing how much more distance or accuracy / dispersion reduction this shaft provides.

Edited April 23 by KC Golf

[Harry Pearson]

Congrats, all. I just researched these shafts after having read an article on Adam Scott. He went to these last year and said everyone was amazed at the added distance he'd gained. He subsequently went to a different shaft which gave him more accuracy. I hope one of the testers is in the 405 category.

[chisag]

6 minutes ago, Harry Pearson said:

I hope one of the testers is in the 405 category.

 

[HikingMike]

23 minutes ago, Harry Pearson said:

I hope one of the testers is in the 405 category.

[kthompson]

Congrats to all those selected!  Anxious to hear how these compare to say, Tour AD and other top-tier shafts.  

[Golfspy_CG2]

9 hours ago, Parshooter36 said:

Congrats to the testers. I hope there are some 90 mph guys in this group.

I'm just sub 90  mostly 83 to 85 but occasionally sneak above that, maybe the AF will get me to 90!  

8 hours ago, cnosil said:

Congrats, Kingsmill should be fun with all the testing stuff that will be in peoples bags. 

No doubt, what is the count at least 3 Ai Smoke Drivers and 2 Autoflex 

3 hours ago, Harry Pearson said:

Congrats, all. I just researched these shafts after having read an article on Adam Scott. He went to these last year and said everyone was amazed at the added distance he'd gained. He subsequently went to a different shaft which gave him more accuracy. I hope one of the testers is in the 405 category.

I am getting the 405 as I'm right in the sweet spot of it's range. 

[Rearviewmirror]

2 minutes ago, Golfspy_CG2 said:

I'm just sub 90  mostly 83 to 85 but occasionally sneak above that, maybe the AF will get me to 90!  

No doubt, what is the count at least 3 Ai Smoke Drivers and 2 Autoflex 

I am getting the 405 as I'm right in the sweet spot of it's range. 

If it doesn't work out for you, I'm just down the road in DC and it'll fit perfectly into my  G430 10K  (although not sure our swing speeds would be compatible...)

If for whatever reason one of the testers doesn't end up working out with theirs, I would love a shot at testing the 405X or 505.

Edited April 23 by Rearviewmirror

[Golfspy_CG2]

3 minutes ago, Rearviewmirror said:

If it doesn't work out for you, I'm just down the road in DC and it'll fit perfectly into my  G430 10K  (although not sure our swing speeds would be compatible...)

If for whatever reason one of the testers doesn't end up working out with theirs, I would love a shot at testing the 405X or 505.

Mine is coming with the PING tip as well and will be tested in the 430 10K Max. 

[Jean D]

Thanks all... it's a huge privilege to be chosen and to be given this responsibility.  I can tell you that all the testers (myself included ) are VERY excited about this one.  I am really looking forward to putting this shaft  on my Qi10 Max and comparing it to the 2 current shafts I have:  Tensei AV Limited Blue 60R and C6 Blue 60S. The simulator is now fully setup , calibrated and ready for some baseline data starting tomorrow  Thanks for all the helpful hints and tips everyone.  Did I mention that I am really excited to be testing this shaft ??? 

[unccross]

I really had my fingers crossed on for this one, congrats to those that were chosen. I look forward to reading the reviews. 

[Kenny B]

8 hours ago, Vegan_Golfer_PNW said:

Hot dang a great group of testers! Hit them well. I may need to amp up my speed work to keep ahead of @Kenny B and hit new found distance here! Congrats all

You have enough speed… work on straight.  

[Kenny B]

13 hours ago, cnosil said:

Congrats, Kingsmill should be fun with all the testing stuff that will be in peoples bags. 

Can I change shafts between holes?

[Kenny B]

Thanks for all the support guys!!  This should be an interesting test, and I hope that this group provides information on the Autoflex Dream 7 shafts that you are looking for; if not… just ask!!

[cnosil]

8 minutes ago, Kenny B said:

Can I change shafts between holes?

As long as you aren't involved in the side games.

[BallsLeon]

Just got my shipping notice! Looks like the shaft should be in Kansas by Tuesday! 



Will get my full intro posted this weekend, but to whet your appetites...

I went with the 405x model in green. The shaft will come tipped for Callaway in the full raw uncut length with the grip off. Limited grip options from the wholesaler, but have Lamkin Sonar+ Blackout grips that I plan to use. Once I have the shaft, I will bring it in for a full fitting with my local fitter (GolfMD) to get everything dialed in.

Edited April 26 by BallsLeon

[Nick_D]

1 minute ago, BallsLeon said:

Just got my shipping notice! Looks like the shaft should be in Kansas by Tuesday! 



Will get my full intro posted this weekend, but to whet your appetites...

I went with the 405x model in green. The shaft will come tipped for Callaway in the full raw uncut length with the grip off. Limited grip options from the wholesaler, but have Lamkin Sonar+ Blackout grips that I plan to use. Once I have the shaft, I will bring it in for a full fitting with my local fitter (GolfMD) to get everything dialed in.

Excited to see pictures of this one in hand! This was the color I was most curious about

[MrBandit]

Congratulations to all testers! Looking forward to reading the testing results.

[Flerric]

1 hour ago, BallsLeon said:

Just got my shipping notice! Looks like the shaft should be in Kansas by Tuesday! 



Will get my full intro posted this weekend, but to whet your appetites...

I went with the 405x model in green. The shaft will come tipped for Callaway in the full raw uncut length with the grip off. Limited grip options from the wholesaler, but have Lamkin Sonar+ Blackout grips that I plan to use. Once I have the shaft, I will bring it in for a full fitting with my local fitter (GolfMD) to get everything dialed in.

Awe, she looks beautiful! Excited for more. 

[HikingMike]

2 hours ago, BallsLeon said:

I went with the 405x model in green. The shaft will come tipped for Callaway in the full raw uncut length with the grip off. Limited grip options from the wholesaler, but have Lamkin Sonar+ Blackout grips that I plan to use. Once I have the shaft, I will bring it in for a full fitting with my local fitter (GolfMD) to get everything dialed in.

Great choice. That would be my color pick too I think. My thought is, it's an Autoflex and you're going to have a fun time testing for us all, so you might as well pick something bright that stands out. It's no time to be reserved