Jump to content

Universal screws for driver adapters


Recommended Posts

Our Sponsors

If you mean the screw that actually hold the head to the shaft via the adapter chances are no based on the slightly different torque wrench the OEMS supply. Some are interchangeable but not all.

If you mean to put a PING head with a Callaway tip. I would suggest looking at club conex. They have a system that works on most larger companies.

Driver - 44.5" 5.0 flex 10.5 deg ACCRA tour Z GP MCC4+ 1 deg closed

Irons - 5-pw, GW stnd length 5.0 flex same grip 1 deg flat. Type low medium offset cavity back, no diggers

Wedges - 56 and 60 tour grind wedge spinner and mcc4+ grip 2 flat 10 and 8 in bounce

Putter - 33" 3 deg loft 70 lie, lrg slight line slightly toe hang

Ball - truvis

Carried in a Sun Mountain C-130 USA bag - BE PROUD.

HC - LH but 85 is a good number, playing in Ohio.

Link to post
Share on other sites
If you mean the screw that actually hold the head to the shaft via the adapter chances are no based on the slightly different torque wrench the OEMS supply. Some are interchangeable but not all.
If you mean to put a PING head with a Callaway tip. I would suggest looking at club conex. They have a system that works on most larger companies.

As an FYI the screw head for Callaway and Ping are identical. We have both and two star drivers are the same, however, what I don't know is the torque different as one is for a wood and the other a driver.


Sent from my iPad using MyGolfSpy

Left Hand orientation

:ping-small: G410 SFT driver 

:cobra-small: F Max 5 wood

:ping-small:  9 wood
:ping-small:  410  Hybrids 22*, 26*
:wilson-small: C300 4i-GP
:cleveland-small:  Wedges RTX 3.0: 52*, 56*
:ping-small: EYE 2 Wedge 60*

:odyssey-small: O Works putter
:918457628_PrecisionPro:NX9-HD

:CaddyTek: - 4 Wheel 
:footjoy-small: - too many shoes to list and so many to buy

:1590477705_SunMountain:

:SuperSpeed: Official Tester 2020   Beginning Driver Speed  - 78

 

Link to post
Share on other sites
If you mean the screw that actually hold the head to the shaft via the adapter chances are no based on the slightly different torque wrench the OEMS supply. Some are interchangeable but not all.
If you mean to put a PING head with a Callaway tip. I would suggest looking at club conex. They have a system that works on most larger companies.

I have a few drivers from different companies. Was curious if there was an easier way to find replacement screws if needed. I’ll have to look at CC more deeply. I remember hearing about their adapters before.


Sent from my iPhone using MyGolfSpy
Link to post
Share on other sites
2 hours ago, MindBodyGolf said:


I have a few drivers from different companies. Was curious if there was an easier way to find replacement screws if needed. I’ll have to look at CC more deeply. I remember hearing about their adapters before.


Sent from my iPhone using MyGolfSpy

Yeah, if you want to connect different companies, club conned is 100% your best bet. 

Wilson Staff C300 9.0* Fujikura Pro 58 stiff

Callaway Rogue 3W Mitsubishi Diamana D+ LTD 80 stiff

Mizuno MP-18 MMC FLI-HI 2 iron UST Mamiya Recoil 95 stiff

Ping I200's 4-W Aerotech Steelfiber I110 CW stiff

Ping Glide 52* and 58* stiff

Bettinardi Studio Stock #38 Armlock

 

 

Link to post
Share on other sites

How often are you losing the adapter screws that this is an issue?  I don't think I've ever lost one, or had one fall out.

FWIW Taylormade is a metric M4 screw to match the thread.  The harder part is finding the proper head on that type of screw to fit the torque wrench.

If you just want to have a couple of extra's laying around you can find replacement screws pretty cheap on ebay.

Driver: :callaway-logo-1: Epic SZ w/ VA Composites Raijin 65 04

3w: :taylormade-small:'16 M2 hl w/ Diamana D+ 82

5w: :cleveland-small: Launcher HB w/ HZRDUS Yellow

Hybrid: :cleveland-small: 22 deg. Launcher HB w/ HZRDUS Black

Irons: :ping-small: 5i-UW G700 w/ X100 soft stepped once

Wedges: :cleveland-small: 54 & 58 CBX w/ Nippon Modus 3 125

Putter: :odyssey-small: Red 7s

Link to post
Share on other sites
How often are you losing the adapter screws that this is an issue?  I don't think I've ever lost one, or had one fall out.
FWIW Taylormade is a metric M4 screw to match the thread.  The harder part is finding the proper head on that type of screw to fit the torque wrench.
If you just want to have a couple of extra's laying around you can find replacement screws pretty cheap on ebay.

Lol, I’m not losing them. Just was thinking about it and thought I’d put it out there since I couldn’t find any type of answer anywhere else.


Sent from my iPhone using MyGolfSpy
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...