2023 Evnroll V Series Putter Lineup

[GolfSpy_APH]

Evnroll has a whole lot of putters in this line up! 15 to be exact. Definitely a lot that in my wheelhouse as far as looks and seeing as I have never owned a Evnroll putter before this may just be the time. 

You can read the full article here: https://mygolfspy.com/2023-evnroll-v-series-putter-line/

As well we will have a Gratuitous Photo Thread up before too long as well!

What are your favourites and what would be your short list picks? 

[GolfSpy_BNG]

Mention it and it appears haha. The 5.1 and 12 have my attention for sure.  As I mentioned in the “What equipment are you thinking about” thread, I would have preferred a mini 11vx due to my own weirdness with holes in putters but if it performs I’ll give it a chance.  
 

My dream putter would be a milled 1 piece “spider X/ER11vx” with the SIK DLT face. 

[GolfSpy_APH]

Just now, blackngold_blood said:

Mention it and it appears haha. The 5.1 and 12 have my attention for sure.  As I mentioned in the “What equipment are you thinking about” thread, I would have preferred a mini 11vx due to my own weirdness with holes in putters but if it performs I’ll give it a chance.  
 

My dream putter would be a milled 1 piece “spider X/ER11vx” with the SIK DLT face. 

Had I not been putting the baby to sleep I would have had it up before you had posted haha

[GolfSpy_BNG]

1 minute ago, GolfSpy_APH said:

Had I not been putting the baby to sleep I would have had it up before you had posted haha

Well sir, I’d say you prioritized the right thing. 

[cnosil]

6 hours ago, GolfSpy_APH said:

Evnroll has a whole lot of putters in this line up! 15 to be exact. Definitely a lot that in my wheelhouse as far as looks and seeing as I have never owned a Evnroll putter before this may just be the time. 

You can read the full article here: https://mygolfspy.com/2023-evnroll-v-series-putter-line/

As well we will have a Gratuitous Photo Thread up before too long as well!

What are your favourites and what would be your short list picks? 

 I really liked the ER2 and can't wait to roll one in the coming weeks.  

[G56788]

I’ve gotta go with the EV8. I tried it out recently (not the new release version). I rolled it so smooth I had to intentionally mishit some putts just to make sure the store hadn’t grooved the surface some how. 

[DukeStKing]

Oh man- I have a new ER2v in black. Love it. But I really like the look of the 5.1 in silver and black… and I REALLY like the changeable weights. This is not good.

[GolfSpy_SHARK]

Dang…..love my ER2…..but that 12 is hollering at me

[fixyurdivot]

I'm still gaming and having good results with my ER5v.  I did see this announcement today and noted that not only have the folks at Evnroll been busy  but that changeable weights are in every product offered.  That level of adjustability sure makes sense - particularly in todays world of computer aided putter fitting.  Lots of mallet designs in the line-up; that says something to me as well.

[PMookie]

EV5.1 black and satin, or ERZ.1, but I’d need a fitting because I’m not sure either one would work for me based-on Edel and Ping fittings I’ve done. The only “Anser-style” has the wide flange with the rear line and I don’t like that. I actually would want something with zero lines on it, or one just on the top of the leading edge, so EV5.1 would be choice 1.

[fixyurdivot]

34 minutes ago, PMookie said:

EV5.1 black and satin, or ERZ.1, but I’d need a fitting because I’m not sure either one would work for me based-on Edel and Ping fittings I’ve done. The only “Anser-style” has the wide flange with the rear line and I don’t like that. I actually would want something with zero lines on it, or one just on the top of the leading edge, so EV5.1 would be choice 1.

Funny you mention target lines and preferences.  While doing my review on the ER5v, I added a Sharpie marker toe and heel side top line to the stock, middle line in attempt to test out the mfg. claim about the face design (even rollout on off-center strikes).  I never wiped them off and now kind of use them to help frame/position the ball on the centerline.  I wonder what Guerin would say about this? 

[GolfSpy BOS]

These look like some great new options. Man those new 5 models have my interest. I think the 5.1 looks best to me, but I’d love to see them all in the metal to decide. 

[Placasse61]

Nice looking options and the face groves are intriguing. I really like the 2 in black. Would like to feel them also.

[DukeStKing]

Oh man- I have a new ER2v in black. Love it. But I really like the look of the 5.1 in silver and black… and I REALLY like the changeable weights. This is not good.

[DukeStKing]

So with the changeable weights in the 5’s, can the weights be re-configured to make the head face balanced? If so, does that reduce the significance of the interchangeable hosels? 

[cnosil]

1 hour ago, DukeStKing said:

So with the changeable weights in the 5’s, can the weights be re-configured to make the head face balanced? If so, does that reduce the significance of the interchangeable hosels? 

Technically with enough weight you probably could, but I think that much weight would throw off the feel/flow of the putter.  The best way to control toe hang is by controlling the shaft intersection point,  

[DukeStKing]

3 minutes ago, cnosil said:

Technically with enough weight you probably could, but I think that much weight would throw off the feel/flow of the putter.  The best way to control toe hang is by controlling the shaft intersection point,  

Another thing I’m wondering about is how much a MOI benefit there may be in the new 5’s weights in comparison to my ER2v? How much sense does it make to upgrade from the ER2v to the 2023 models because of the weights? In my head, I’m always wondering if a slight upgrade in tech is worth it. 

[cnosil]

11 minutes ago, DukeStKing said:

Another thing I’m wondering about is how much a MOI benefit there may be in the new 5’s weights in comparison to my ER2v? How much sense does it make to upgrade from the ER2v to the 2023 models because of the weights? In my head, I’m always wondering if a slight upgrade in tech is worth it. 

I personally wouldn’t thing there is much change;  I personally believe it is more of a fitting tool to help manage head weight.  

[GolfSpy_BNG]

I’m guessing you could get increase/decrease the toe hang slightly by making the tie lighter/heavier. Not go from toe hang to face balance but maybe add/subtract a few degrees if needed.  Big fan of the in-line slant vs the normal slant neck. 

[Middler]

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. My ER5B has 278 rounds on it. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag. I am about as anal about caring for my clubs as anyone you'd ever meet, I use iron covers on every other iron. Other guys I play with ask me if my clubs are new, my Mizuno's are 5 years old and my W/S RM Midsize irons were 20 years old when I sold them - still pristine.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the satin v black fence?

[If Evnroll has substantially changed their black process, by all means correct me.]

[GolfSpy SAM]

1 minute ago, Middler said:

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the fence?

Dang - that IS a lot. My only question would be looking at address, though, is there wear/tear?  I don't (ultimately) mind it on the bottom, but it might distract me if it's also got some that's visible at address.  Those shaft rubbings seem crazy to me - that's such a bummer. 

[Middler]

9 minutes ago, Samsonite said:

Dang - that IS a lot. My only question would be looking at address, though, is there wear/tear?  I don't (ultimately) mind it on the bottom, but it might distract me if it's also got some that's visible at address.  Those shaft rubbings seem crazy to me - that's such a bummer. 

No, it looks like new from the top at address. I assume the wear is just from grazing the grass on greens and/or the head cover which rests on the sole when it's in the bag? The latter might sound crazy, but the wear is most prominent at the leading and trailing edge, I can see bare metal at both - and that's a putter that's been babied all along.

[DukeStKing]

53 minutes ago, cnosil said:

I personally wouldn’t thing there is much change;  I personally believe it is more of a fitting tool to help manage head weight.  

True- for the 2’s. I wouldn’t “upgrade” my ER2v for the new 2’s. I’m thinking of switching to the 5.1. I would think the additional weights in the 5’s will make a big MOI difference- especially since the weights go all the way down the wings. 

53 minutes ago, cnosil said:

 

Edited January 3, 2023 by DukeStKing

[cnosil]

1 minute ago, DukeStKing said:

True- for the 2’s. I wouldn’t “upgrade” my ER2v for the new 2’s. I’m thinking of switching to the 5.1. I would think the additional weights in the 5’s will make a big MOI difference- especially since the weights go all the way down the wings. 

That is a different putter design than the 2 by nature of the club design it will have higher MOi.  But I still think adding more weight to the 5.1 is just a weight fitting thing and wouldn’t significantly change the MOI.   I’ll try to remember to ask today if Evnroll will be offering weight kits or if it is something that will need to be custom. 

[cnosil]

I asked about the weight kits and they are not provided as part of the purchase;  they may be available as a separate purchase but they also believe that they are primarily for fitting. 

[fixyurdivot]

7 hours ago, Middler said:

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. My ER5B has 278 rounds on it. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag. I am about as anal about caring for my clubs as anyone you'd ever meet, I use iron covers on every other iron. Other guys I play with ask me if my clubs are new, my Mizuno's are 5 years old and my W/S RM Midsize irons were 20 years old when I sold them - still pristine.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the satin v black fence?

[If Evnroll has substantially changed their black process, by all means correct me.]

This is what makes me nervous about any of the various dark finishes on club heads and shafts.  Those kind of wear marks make @GolfSpy_APHget all weak in the knees.... and has my OCD going into hyper-tacacardia 

[WaffleHouseTour]

12 hours ago, fixyurdivot said:

This is what makes me nervous about any of the various dark finishes on club heads and shafts.  Those kind of wear marks make @GolfSpy_APHget all weak in the knees.... and has my OCD going into hyper-tacacardia 

The correct alphabetical order is CDO…

[mtcowdog]

I like the look of the 4.1 or 5.2 duo. I am a fan of perpendicular color contrast. Hosel options are nice. Short slant usually works best for me. I'm a fan of these.

[null]

On 1/3/2023 at 12:59 PM, Middler said:

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. My ER5B has 278 rounds on it. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag. I am about as anal about caring for my clubs as anyone you'd ever meet, I use iron covers on every other iron. Other guys I play with ask me if my clubs are new, my Mizuno's are 5 years old and my W/S RM Midsize irons were 20 years old when I sold them - still pristine.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the satin v black fence?

[If Evnroll has substantially changed their black process, by all means correct me.]

To be fair, this is similar wear you can expect to see on any black finished putter, especially if it not DLC finished.  Same goes for black steel shafts.  But that discussion is for another thread.

[null]

On 1/3/2023 at 12:59 PM, Middler said:

Don't get me wrong, I am totally an Evnroll fanboy. My gamer was an ER2 when they first came out, and I switched to an ER5B in May 2020 - love them, and would buy another...

...BUT, I would not buy black "murdered out" from Evnroll again, the anodizing, paint or whatever they use is not as durable as I would expect. My ER5B has 278 rounds on it. There's a lot of wear on the head of mine (sole, leading and trailing edges especially), and it is NEVER without its head cover except when I am using it. And the shaft paint has worn off where it touches the dedicated putter slot in my PING bag. I am about as anal about caring for my clubs as anyone you'd ever meet, I use iron covers on every other iron. Other guys I play with ask me if my clubs are new, my Mizuno's are 5 years old and my W/S RM Midsize irons were 20 years old when I sold them - still pristine.

So when I buy another Evnroll, I'm staying with satin - my ER2 looked almost new when I sold it. FWIW, for anyone on the satin v black fence?

[If Evnroll has substantially changed their black process, by all means correct me.]

To be fair, this is similar wear you can expect to see on any black finished putter, especially if it not DLC finished.  Same goes for black steel shafts.